/* * uqmi -- tiny QMI support implementation * * Copyright (C) 2014-2015 Felix Fietkau * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, * Boston, MA 02110-1301 USA. */ #define __uqmi_wds_commands \ __uqmi_command(wds_start_network, start-network, required, QMI_SERVICE_WDS), \ __uqmi_command(wds_set_auth, auth-type, required, CMD_TYPE_OPTION), \ __uqmi_command(wds_set_username, username, required, CMD_TYPE_OPTION), \ __uqmi_command(wds_set_password, password, required, CMD_TYPE_OPTION), \ __uqmi_command(wds_set_ip_family, ip-family, required, CMD_TYPE_OPTION), \ __uqmi_command(wds_set_autoconnect, autoconnect, no, CMD_TYPE_OPTION), \ __uqmi_command(wds_stop_network, stop-network, required, QMI_SERVICE_WDS), \ __uqmi_command(wds_get_packet_service_status, get-data-status, no, QMI_SERVICE_WDS), \ __uqmi_command(wds_set_autoconnect_setting, set-autoconnect, required, QMI_SERVICE_WDS), \ __uqmi_command(wds_reset, reset-wds, no, QMI_SERVICE_WDS), \ __uqmi_command(wds_get_current_settings, get-current-settings, no, QMI_SERVICE_WDS) \ #define wds_helptext \ " --start-network : Start network connection (use with options below)\n" \ " --auth-type pap|chap|both|none: Use network authentication type\n" \ " --username : Use network username\n" \ " --password : Use network password\n" \ " --ip-family : Use ip-family for the connection (ipv4, ipv6, unspecified)\n" \ " --autoconnect: Enable automatic connect/reconnect\n" \ " --stop-network : Stop network connection (use with option below)\n" \ " --autoconnect: Disable automatic connect/reconnect\n" \ " --get-data-status: Get current data access status\n" \ " --set-autoconnect : Get current data access status (disabled, enabled, paused)\n" \ " --get-current-settings: Get current connection settings\n" \