/* * uqmi -- tiny QMI support implementation * * Copyright (C) 2014-2015 Felix Fietkau * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, * Boston, MA 02110-1301 USA. */ #define __uqmi_nas_commands \ __uqmi_command(nas_do_set_system_selection, __set-system-selection, no, QMI_SERVICE_NAS), \ __uqmi_command(nas_set_network_modes, set-network-modes, required, CMD_TYPE_OPTION), \ __uqmi_command(nas_initiate_network_register, network-register, no, QMI_SERVICE_NAS), \ __uqmi_command(nas_set_plmn, set-plmn, no, QMI_SERVICE_NAS), \ __uqmi_command(nas_set_mcc, mcc, required, CMD_TYPE_OPTION), \ __uqmi_command(nas_set_mnc, mnc, required, CMD_TYPE_OPTION), \ __uqmi_command(nas_network_scan, network-scan, no, QMI_SERVICE_NAS), \ __uqmi_command(nas_get_signal_info, get-signal-info, no, QMI_SERVICE_NAS), \ __uqmi_command(nas_get_serving_system, get-serving-system, no, QMI_SERVICE_NAS), \ __uqmi_command(nas_set_network_preference, set-network-preference, required, CMD_TYPE_OPTION), \ __uqmi_command(nas_set_roaming, set-network-roaming, required, CMD_TYPE_OPTION) \ #define nas_helptext \ " --set-network-modes : Set usable network modes (Syntax: [,,...])\n" \ " Available modes: all, lte, umts, gsm, cdma, td-scdma\n" \ " --set-network-preference : Set preferred network mode to \n" \ " Available modes: auto, gsm, wcdma\n" \ " --set-network-roaming : Set roaming preference:\n" \ " Available modes: any, off, only\n" \ " --network-scan: Initiate network scan\n" \ " --network-register: Initiate network register\n" \ " --set-plmn: Register at specified network\n" \ " --mcc : Mobile Country Code (0 - auto)\n" \ " --mnc : Mobile Network Code\n" \ " --get-signal-info: Get signal strength info\n" \ " --get-serving-system: Get serving system info\n" \