project/netifd.git
7 years agoutils: use list_add_tail() in vlist_simple_add() to preserve user-defined order of...
Jo-Philipp Wich [Thu, 2 May 2013 08:47:40 +0000 (10:47 +0200)]
utils: use list_add_tail() in vlist_simple_add() to preserve user-defined order of entries

7 years agobridge: disable multicast snooping by default
Jo-Philipp Wich [Sat, 27 Apr 2013 09:14:07 +0000 (11:14 +0200)]
bridge: disable multicast snooping by default

7 years agointerface: fix removing main_dev on config reload changes if ifname is reset to NULL
Felix Fietkau [Thu, 25 Apr 2013 16:27:20 +0000 (18:27 +0200)]
interface: fix removing main_dev on config reload changes if ifname is reset to NULL

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agointerface: rework reload, ensure that all changes are applied before restarting the...
Felix Fietkau [Thu, 25 Apr 2013 16:19:45 +0000 (18:19 +0200)]
interface: rework reload, ensure that all changes are applied before restarting the interface

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoset default bridge priority to 0x7FFF
Jo-Philipp Wich [Tue, 23 Apr 2013 14:04:36 +0000 (16:04 +0200)]
set default bridge priority to 0x7FFF

7 years agoadd bridge priority option
Niels Boehm [Mon, 4 Feb 2013 18:05:17 +0000 (18:05 +0000)]
add bridge priority option

[netifd] add bridge priority option

Using the bridge priority (lower numbers are higher in the
hierarchy), one can ensure that the router is chosen as root
bridge in a setup with spanning tree protocol.

For instance, one can set the priority of network lan to 32767,
causing the router to win over all directly and indirectly
connected nodes that have a default priority of 32768.

The reason for doing that is that otherwise it has a default
priority 32768 as well and any other connected node could win and
get root bridge. In a home setup, those nodes are often desktop
or laptop boxes and get switched off from time to time. As a
consequence, root bridges vanish or new root bridges get chosen
relatively often, resulting in frequent topology changes to the
STP network. While the new topology has not settled, packets can
get lost, causing noticeable interruptions of network traffic.

Setting the router's bridge on a lower numbered priority (and thus
higher in the selection hierarchy) solves the problem in the vast
majority of the cases by ensuring that the device that is most
likely powered on 24/7 gets chosen as root and prevents topology
changes.

Signed-off-by: Niels Boehm <blubberdiblub@gmail.com>
7 years agoIPv6: Try harder to assign prefix parts
Steven Barth [Fri, 19 Apr 2013 13:36:19 +0000 (15:36 +0200)]
IPv6: Try harder to assign prefix parts

7 years agodevice: use safe_list for device event, fixes some hang issues
Felix Fietkau [Mon, 15 Apr 2013 14:20:50 +0000 (16:20 +0200)]
device: use safe_list for device event, fixes some hang issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoIPv6: Remove local ULA if there is an external one
Steven Barth [Tue, 9 Apr 2013 13:41:00 +0000 (15:41 +0200)]
IPv6: Remove local ULA if there is an external one

7 years agoFix comparisation conditions in route_cmp()
Jo-Philipp Wich [Tue, 9 Apr 2013 12:16:19 +0000 (14:16 +0200)]
Fix comparisation conditions in route_cmp()

7 years agoFix a memory corruption when updating IPv6 prefixes
Steven Barth [Fri, 5 Apr 2013 13:25:38 +0000 (15:25 +0200)]
Fix a memory corruption when updating IPv6 prefixes

7 years agoMaintain config order of ip rules unless user explicitely provides priority
Jo-Philipp Wich [Fri, 5 Apr 2013 11:45:08 +0000 (13:45 +0200)]
Maintain config order of ip rules unless user explicitely provides priority

7 years agofix route sorting order
Felix Fietkau [Fri, 5 Apr 2013 11:14:44 +0000 (13:14 +0200)]
fix route sorting order

New sorting order:
 - prefix length (descending)
 - metric (ascending)
 - flags
 - target address

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoAdd myself to header for IPv6 work
Steven Barth [Fri, 5 Apr 2013 11:31:37 +0000 (13:31 +0200)]
Add myself to header for IPv6 work

7 years agoFix system_resolve_rt_table() stub in system-dummy.c
Jo-Philipp Wich [Fri, 5 Apr 2013 10:24:13 +0000 (12:24 +0200)]
Fix system_resolve_rt_table() stub in system-dummy.c

7 years agoIncorperate route table into avl key
Jo-Philipp Wich [Fri, 5 Apr 2013 09:15:58 +0000 (11:15 +0200)]
Incorperate route table into avl key

7 years agoExpose route table if route is not in the main table
Jo-Philipp Wich [Thu, 4 Apr 2013 12:41:40 +0000 (14:41 +0200)]
Expose route table if route is not in the main table

7 years agoAdd support for ip rules
Jo-Philipp Wich [Thu, 4 Apr 2013 12:41:39 +0000 (14:41 +0200)]
Add support for ip rules

7 years agoImplement support for route / route6 table attribute
Jo-Philipp Wich [Thu, 4 Apr 2013 12:41:38 +0000 (14:41 +0200)]
Implement support for route / route6 table attribute

7 years agoRewrite IPv6 prefix assignment
Steven Barth [Wed, 3 Apr 2013 18:03:15 +0000 (20:03 +0200)]
Rewrite IPv6 prefix assignment

7 years agoFix IPv6 RDNSS writing to resolv.conf (buffer was too short)
Steven Barth [Tue, 19 Mar 2013 10:13:15 +0000 (11:13 +0100)]
Fix IPv6 RDNSS writing to resolv.conf (buffer was too short)

7 years agofix libnl detection
Thomas Gstädtner [Sun, 3 Mar 2013 17:20:10 +0000 (18:20 +0100)]
fix libnl detection

7 years agoOnly update resolv.conf if changed (avoid logspam)
Steven Barth [Tue, 19 Feb 2013 08:36:23 +0000 (09:36 +0100)]
Only update resolv.conf if changed (avoid logspam)

7 years agoprefer to link against libjson-c over libjson (the new library name in git versions...
Felix Fietkau [Mon, 11 Feb 2013 21:10:03 +0000 (22:10 +0100)]
prefer to link against libjson-c over libjson (the new library name in git versions of json-c)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agodevice: protect device event broadcast against simultaneous deletions of multiple...
Felix Fietkau [Sun, 10 Feb 2013 18:14:35 +0000 (19:14 +0100)]
device: protect device event broadcast against simultaneous deletions of multiple receivers in the callback (can happen with aliases)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoproto: default to 128 instead of the "netmask" option for ipv6 addresses
Felix Fietkau [Sun, 10 Feb 2013 18:02:49 +0000 (19:02 +0100)]
proto: default to 128 instead of the "netmask" option for ipv6 addresses

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoImproved IPv6 featureset
Steven Barth [Fri, 1 Feb 2013 12:17:41 +0000 (13:17 +0100)]
Improved IPv6 featureset
* Fix reloading of ula-prefixes
* Added support for temporary addresses and routes
* Added support for offlink addresses
* Improved status-output for assigned prefixes

7 years agoproto-shell: use the new network.interface object
Felix Fietkau [Tue, 29 Jan 2013 14:36:51 +0000 (15:36 +0100)]
proto-shell: use the new network.interface object

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoubus: add a network.interface object to access network.interface.* methods without...
Felix Fietkau [Tue, 29 Jan 2013 14:33:22 +0000 (15:33 +0100)]
ubus: add a network.interface object to access network.interface.* methods without racing wrt. object add/remove

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agofix cleaning up interface state for reload
Felix Fietkau [Tue, 29 Jan 2013 14:00:01 +0000 (15:00 +0100)]
fix cleaning up interface state for reload

Do not clean up config related state or interface dependencies

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoAdd deprecation for static IPv6 prefixes
Steven Barth [Tue, 29 Jan 2013 10:57:18 +0000 (11:57 +0100)]
Add deprecation for static IPv6 prefixes

7 years agoIPv6 prefixes: conform to RFC 6204 requirement L13
Steven Barth [Tue, 29 Jan 2013 10:36:32 +0000 (11:36 +0100)]
IPv6 prefixes: conform to RFC 6204 requirement L13

7 years agoalias: set ifindex on alias device to fix setting addresses/routes
Felix Fietkau [Mon, 28 Jan 2013 20:33:05 +0000 (21:33 +0100)]
alias: set ifindex on alias device to fix setting addresses/routes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoalias: if the underlying device changes (or goes away), set the device present status...
Felix Fietkau [Tue, 22 Jan 2013 16:04:40 +0000 (17:04 +0100)]
alias: if the underlying device changes (or goes away), set the device present status to false to make its users shut down

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoDon't segfault with an unset ula_prefix
Steven Barth [Tue, 22 Jan 2013 15:42:40 +0000 (16:42 +0100)]
Don't segfault with an unset ula_prefix

7 years agoFix segfaults in prefix handling
Steven Barth [Mon, 21 Jan 2013 08:50:43 +0000 (09:50 +0100)]
Fix segfaults in prefix handling

7 years agoalias: rework device updates
Felix Fietkau [Sun, 20 Jan 2013 15:45:59 +0000 (16:45 +0100)]
alias: rework device updates

Apply immediately if alias device is not claimed, otherwise defer until release

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoalias: use layer 3 device instead of main device
Steven Barth [Wed, 16 Jan 2013 13:56:10 +0000 (14:56 +0100)]
alias: use layer 3 device instead of main device

7 years agoFix a race-condition in prefix-assignment
Steven Barth [Tue, 15 Jan 2013 12:19:34 +0000 (13:19 +0100)]
Fix a race-condition in prefix-assignment

7 years agointerface-ip: use calloc_a to get rid of an extra allocation
Felix Fietkau [Tue, 15 Jan 2013 10:08:19 +0000 (11:08 +0100)]
interface-ip: use calloc_a to get rid of an extra allocation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agointerface-ip: replace prefix_assignment_cmp with avl_strcmp
Felix Fietkau [Tue, 15 Jan 2013 10:00:23 +0000 (11:00 +0100)]
interface-ip: replace prefix_assignment_cmp with avl_strcmp

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoremove commented out TODO items
Felix Fietkau [Tue, 15 Jan 2013 09:57:14 +0000 (10:57 +0100)]
remove commented out TODO items

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoInitial IPv6 prefix support
Steven Barth [Tue, 8 Jan 2013 17:52:32 +0000 (18:52 +0100)]
Initial IPv6 prefix support

Signed-off-by: Steven Barth <steven@midlink.org>
7 years agoadd mac os x compat #define for in6_addr s6_addr32
Felix Fietkau [Tue, 15 Jan 2013 09:54:37 +0000 (10:54 +0100)]
add mac os x compat #define for in6_addr s6_addr32

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agosystem-linux.c: use uin64_t datatype to read and store interface statistics, pass...
Jo-Philipp Wich [Sun, 13 Jan 2013 19:34:36 +0000 (20:34 +0100)]
system-linux.c: use uin64_t datatype to read and store interface statistics, pass values as u64 blob type

7 years agofix removal of unknown device
Nathan Hintz [Sun, 6 Jan 2013 02:41:45 +0000 (18:41 -0800)]
fix removal of unknown device

Netifd will crash if an attempt is made to remove a device that is not
known to netifd.  For instance:

  ubus call network.interface.lan remove_device "{ \"name\": \"xxx\" }"

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
7 years agoproto-shell: use calloc_a
Felix Fietkau [Sat, 5 Jan 2013 15:13:29 +0000 (16:13 +0100)]
proto-shell: use calloc_a

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoutils.h: get rid of the duplicate BUILD_BUG_ON definition, use the one from libubox
Felix Fietkau [Sat, 5 Jan 2013 14:48:57 +0000 (15:48 +0100)]
utils.h: get rid of the duplicate BUILD_BUG_ON definition, use the one from libubox

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agouse calloc_a for interface error allocations
Felix Fietkau [Mon, 31 Dec 2012 15:36:01 +0000 (16:36 +0100)]
use calloc_a for interface error allocations

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agointerface: do not clear errors after an interface is marked as down, the user might...
Felix Fietkau [Mon, 31 Dec 2012 15:35:13 +0000 (16:35 +0100)]
interface: do not clear errors after an interface is marked as down, the user might like to read them

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agolog: fix processing of incomplete lines
Felix Fietkau [Sat, 29 Dec 2012 17:54:54 +0000 (18:54 +0100)]
log: fix processing of incomplete lines

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agoduplicate error subsystem and code for interface errors to prevent accessing stale...
Felix Fietkau [Mon, 17 Dec 2012 22:22:46 +0000 (23:22 +0100)]
duplicate error subsystem and code for interface errors to prevent accessing stale data

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agonetifd: stop using jshn_append
Felix Fietkau [Mon, 17 Dec 2012 14:55:45 +0000 (15:55 +0100)]
netifd: stop using jshn_append

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agorewrite resolv.conf after any interface state change (not just up)
Felix Fietkau [Thu, 13 Dec 2012 16:13:43 +0000 (17:13 +0100)]
rewrite resolv.conf after any interface state change (not just up)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agorewrite resolv.conf after interface up setting updates
Felix Fietkau [Wed, 5 Dec 2012 13:26:09 +0000 (14:26 +0100)]
rewrite resolv.conf after interface up setting updates

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
7 years agofix error checking of asprintf
Frank Meerkötter [Mon, 3 Dec 2012 18:29:16 +0000 (19:29 +0100)]
fix error checking of asprintf

see man asprintf
  [...]
  RETURN VALUE
   When  successful, these  functions return the number of bytes printed, just like sprintf(3).
   If memory allocation wasn't possible, or some other error occurs, these functions will return -1,
   and the contents of strp is undefined.

Signed-off-by: Frank Meerkötter <frank@meerkoetter.org>
8 years agoalias: add (and call) a check_state function to fix dynamically creating aliases...
Felix Fietkau [Tue, 30 Oct 2012 00:21:35 +0000 (01:21 +0100)]
alias: add (and call) a check_state function to fix dynamically creating aliases for interfaces that are already up

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
8 years agofix container_of for the log ustream
Felix Fietkau [Tue, 30 Oct 2012 00:13:17 +0000 (01:13 +0100)]
fix container_of for the log ustream

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
8 years agomove uloop_process_delete call to get rid of an unnecessary check
Felix Fietkau [Tue, 30 Oct 2012 00:12:35 +0000 (01:12 +0100)]
move uloop_process_delete call to get rid of an unnecessary check

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
8 years agoproto-shell: ensure that the teardown timeout gets killed
Felix Fietkau [Mon, 29 Oct 2012 23:50:47 +0000 (00:50 +0100)]
proto-shell: ensure that the teardown timeout gets killed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
8 years agolog: the ustream notify_state callback is now optional, remove the stub
Felix Fietkau [Mon, 29 Oct 2012 23:03:47 +0000 (00:03 +0100)]
log: the ustream notify_state callback is now optional, remove the stub

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
8 years agouse ustream for process message logging
Felix Fietkau [Mon, 29 Oct 2012 22:55:14 +0000 (23:55 +0100)]
use ustream for process message logging

8 years agouse FD_CLOEXEC instead of tracking lists of fds
Felix Fietkau [Mon, 29 Oct 2012 22:08:01 +0000 (23:08 +0100)]
use FD_CLOEXEC instead of tracking lists of fds

8 years agobridge: toggle device present state after freeing a bridge member to ensure that...
Felix Fietkau [Fri, 19 Oct 2012 13:49:46 +0000 (15:49 +0200)]
bridge: toggle device present state after freeing a bridge member to ensure that it can be reassigned to a different bridge

8 years agofree unused devices after cleaning up interfaces to get rid of recently-freed bridge...
Felix Fietkau [Fri, 19 Oct 2012 13:49:21 +0000 (15:49 +0200)]
free unused devices after cleaning up interfaces to get rid of recently-freed bridge devices

8 years agofix device_lock/device_unlock imbalances
Felix Fietkau [Fri, 19 Oct 2012 13:48:52 +0000 (15:48 +0200)]
fix device_lock/device_unlock imbalances

8 years agosystem-linux: do not delete kernel-generated ipv6 routes to fix using advertised...
Felix Fietkau [Fri, 28 Sep 2012 23:07:59 +0000 (01:07 +0200)]
system-linux: do not delete kernel-generated ipv6 routes to fix using advertised routes

8 years agodevice.c: use format_macaddr() helper to convert mac addresses to strings, ether_ntoa...
Jo-Philipp Wich [Fri, 28 Sep 2012 15:41:08 +0000 (17:41 +0200)]
device.c: use format_macaddr() helper to convert mac addresses to strings, ether_ntoa() does not guarantee a canonical format

8 years agoutils.c: add helper function to format mac addresses as strings
Jo-Philipp Wich [Fri, 28 Sep 2012 15:40:38 +0000 (17:40 +0200)]
utils.c: add helper function to format mac addresses as strings

8 years agoubus.c: now that disabled routes are in the inactive subtable it makes no sense to...
Jo-Philipp Wich [Thu, 13 Sep 2012 07:24:12 +0000 (10:24 +0300)]
ubus.c: now that disabled routes are in the inactive subtable it makes no sense to expose the enabled attribute anymore

8 years agoubus.c: move disabled routes, ips, dns server into an "inactive" subtable
Jo-Philipp Wich [Thu, 13 Sep 2012 06:57:16 +0000 (09:57 +0300)]
ubus.c: move disabled routes, ips, dns server into an "inactive" subtable

8 years agointerface-ip.c: fix possible null pointer access if calloc() fails
Jo-Philipp Wich [Thu, 13 Sep 2012 06:56:14 +0000 (09:56 +0300)]
interface-ip.c: fix possible null pointer access if calloc() fails

8 years agoadd optional flag for disabling compiler optimization (debug only)
Felix Fietkau [Thu, 6 Sep 2012 14:54:16 +0000 (16:54 +0200)]
add optional flag for disabling compiler optimization (debug only)

8 years agodo not prematurely release the main dev on link loss, should fix DHCP NAK handling
Felix Fietkau [Thu, 6 Sep 2012 14:53:50 +0000 (16:53 +0200)]
do not prematurely release the main dev on link loss, should fix DHCP NAK handling

8 years agoclean up and fix system-dummy addr/route messages
Felix Fietkau [Thu, 6 Sep 2012 10:57:20 +0000 (12:57 +0200)]
clean up and fix system-dummy addr/route messages

8 years agosystem-linux.c: install user routes with RTPROT_STATIC instead of RTPROT_BOOT so...
Jo-Philipp Wich [Sat, 11 Aug 2012 16:01:28 +0000 (18:01 +0200)]
system-linux.c: install user routes with RTPROT_STATIC instead of RTPROT_BOOT so that routing daemons like quagga will pick it up

8 years agodo not recreate or restart external devices on settings changes, apply them at runtime
Felix Fietkau [Thu, 12 Jul 2012 21:48:29 +0000 (23:48 +0200)]
do not recreate or restart external devices on settings changes, apply them at runtime

8 years agoapply basic device settings for hotplug devices, e.g. mtu and txqueuelen
Felix Fietkau [Thu, 12 Jul 2012 21:46:32 +0000 (23:46 +0200)]
apply basic device settings for hotplug devices, e.g. mtu and txqueuelen

8 years agoadd simple device config params to interface blob attributes, and add a flag that...
Felix Fietkau [Thu, 12 Jul 2012 21:28:22 +0000 (23:28 +0200)]
add simple device config params to interface blob attributes, and add a flag that indicates if it is present

8 years agoexpose system_if_apply_settings, make it ignore the mac address for external devices
Felix Fietkau [Thu, 12 Jul 2012 21:25:21 +0000 (23:25 +0200)]
expose system_if_apply_settings, make it ignore the mac address for external devices

8 years agoensure hotplug devices are marked as present in the add path - they are not cleaned...
Felix Fietkau [Thu, 12 Jul 2012 21:20:38 +0000 (23:20 +0200)]
ensure hotplug devices are marked as present in the add path - they are not cleaned up if they have config settings attached to them

8 years agofix device_lock/device_unlock imbalance in the hotplug device handling
Felix Fietkau [Thu, 12 Jul 2012 21:20:01 +0000 (23:20 +0200)]
fix device_lock/device_unlock imbalance in the hotplug device handling

8 years agoadd some debug messages for device user count
Felix Fietkau [Thu, 12 Jul 2012 21:17:38 +0000 (23:17 +0200)]
add some debug messages for device user count

8 years agosystem-linux.c: fix sysctl setting
Jo-Philipp Wich [Wed, 11 Jul 2012 18:22:42 +0000 (20:22 +0200)]
system-linux.c: fix sysctl setting

The system_set_dev_sysctl() function erroneously used the value instead of the
device name to format the sysctl path, this change corrects that.

8 years agowhen specifying hotplug devices that already have existing configured devices, set...
Felix Fietkau [Thu, 5 Jul 2012 18:32:07 +0000 (20:32 +0200)]
when specifying hotplug devices that already have existing configured devices, set the external flag

8 years agoavoid setting device presence for wifi interfaces via hotplug messages
Felix Fietkau [Thu, 5 Jul 2012 18:30:46 +0000 (20:30 +0200)]
avoid setting device presence for wifi interfaces via hotplug messages

8 years agoalias: use a callback for managing device presence state, track alias deps in a separ...
Felix Fietkau [Thu, 5 Jul 2012 18:28:31 +0000 (20:28 +0200)]
alias: use a callback for managing device presence state, track alias deps in a separate list to avoid recursion issues

8 years agosplit alias support into a separate source file for better readability
Felix Fietkau [Thu, 5 Jul 2012 17:58:46 +0000 (19:58 +0200)]
split alias support into a separate source file for better readability

8 years agozero-initialize the ifreq when adding/removing bridge member interfaces
Felix Fietkau [Thu, 5 Jul 2012 16:17:46 +0000 (18:17 +0200)]
zero-initialize the ifreq when adding/removing bridge member interfaces

8 years agozero-initialize the ifreq when setting interfaces up or down
Felix Fietkau [Thu, 5 Jul 2012 16:16:31 +0000 (18:16 +0200)]
zero-initialize the ifreq when setting interfaces up or down

8 years agomemset the on-stack device route when clearing local subnet routes
Felix Fietkau [Thu, 5 Jul 2012 16:15:09 +0000 (18:15 +0200)]
memset the on-stack device route when clearing local subnet routes

8 years agomake alias devices attach to interface l2 devs
Felix Fietkau [Thu, 5 Jul 2012 12:33:04 +0000 (14:33 +0200)]
make alias devices attach to interface l2 devs

8 years agofix ifname for alias+vlan chains
Felix Fietkau [Thu, 5 Jul 2012 12:18:04 +0000 (14:18 +0200)]
fix ifname for alias+vlan chains

8 years agomake vlan devices virtual to avoid avl tree issues with changing ifnames when bound...
Felix Fietkau [Thu, 5 Jul 2012 13:08:55 +0000 (15:08 +0200)]
make vlan devices virtual to avoid avl tree issues with changing ifnames when bound to alias interfaces

8 years agodevice: initialize dev->set_state for virtual devices
Felix Fietkau [Thu, 5 Jul 2012 13:06:09 +0000 (15:06 +0200)]
device: initialize dev->set_state for virtual devices

8 years agodevice: export device_broadcast_event
Felix Fietkau [Thu, 5 Jul 2012 13:09:40 +0000 (15:09 +0200)]
device: export device_broadcast_event

8 years agovlan.c: prevent segfault in get_vlan_device_chain() if the base device does not exist
Jo-Philipp Wich [Thu, 5 Jul 2012 11:57:25 +0000 (13:57 +0200)]
vlan.c: prevent segfault in get_vlan_device_chain() if the base device does not exist

8 years agoubus.c: expose metric and mtu values if applicable
Jo-Philipp Wich [Fri, 29 Jun 2012 11:27:27 +0000 (13:27 +0200)]
ubus.c: expose metric and mtu values if applicable

8 years agointerface-ip.{c,h}: add new flag DEVROUTE_MTU and set it for per-route mtu overrides
Jo-Philipp Wich [Fri, 29 Jun 2012 11:26:32 +0000 (13:26 +0200)]
interface-ip.{c,h}: add new flag DEVROUTE_MTU and set it for per-route mtu overrides

8 years agoubus.c: expose route enabled state
Jo-Philipp Wich [Thu, 28 Jun 2012 22:05:43 +0000 (00:05 +0200)]
ubus.c: expose route enabled state