From: INAGAKI Hiroshi Date: Sun, 20 Aug 2017 03:48:53 +0000 (+0900) Subject: luci-app-mwan3: Sync translations X-Git-Url: http://git.archive.openwrt.org/?p=project%2Fluci.git;a=commitdiff_plain;h=d503740be1ca822107a7c92eba0e3615184d573e luci-app-mwan3: Sync translations Synchronized translations with sources. Signed-off-by: INAGAKI Hiroshi --- diff --git a/applications/luci-app-mwan3/po/ja/mwan3.po b/applications/luci-app-mwan3/po/ja/mwan3.po index 89fa5ea02..b60d12697 100644 --- a/applications/luci-app-mwan3/po/ja/mwan3.po +++ b/applications/luci-app-mwan3/po/ja/mwan3.po @@ -88,6 +88,9 @@ msgstr "" msgid "Enabled" msgstr "有効" +msgid "Enter value in hex, starting with 0x" +msgstr "" + msgid "Error collecting troubleshooting information" msgstr "トラブルシューティング情報の収集エラー" @@ -100,6 +103,9 @@ msgstr "" msgid "Failure interval" msgstr "障害検出 インターバル" +msgid "Firewall mask" +msgstr "" + msgid "Flush conntrack table" msgstr "" @@ -370,12 +376,6 @@ msgstr "障害復旧 インターバル" msgid "Restart MWAN" msgstr "MWAN の再起動" -msgid "Restore default hotplug script" -msgstr "デフォルトのホットプラグ スクリプトの復元" - -msgid "Restore..." -msgstr "復元..." - msgid "Rule" msgstr "ルール" @@ -443,6 +443,20 @@ msgstr "" "に対して Ping の送信が行われます。常にオンラインとする場合、空欄のままにしま" "す。" +msgid "" +"This section allows you to modify the content of \"/etc/mwan3.user\".
The file is also preserved during sysupgrade.

Notes:
This " +"file is interpreted as a shell script.
The first line of the script " +"must be "#!/bin/sh" without quotes.
Lines beginning with # are " +"comments and are not executed.
Put your custom mwan3 action here, they " +"will
be executed with each netifd hotplug interface event
on " +"interfaces for which mwan3 is enabled.

There are three main " +"environment variables that are passed to this script.

$ACTION " +"Either \"ifup\" or \"ifdown\"
$INTERFACE Name of the interface which " +"went up or down (e.g. \"wan\" or \"wwan\")
$DEVICE Physical device name " +"which interface went up or down (e.g. \"eth0\" or \"wwan0\")

" +msgstr "" + msgid "This section allows you to modify the contents of /etc/config/mwan3" msgstr "" "このセクションでは、 /etc/config/mwan3 の内容を変更することができます。" @@ -455,32 +469,15 @@ msgid "This section allows you to modify the contents of /etc/config/wireless" msgstr "" "このセクションでは、 /etc/config/wireless の内容を変更することができます。" -msgid "" -"This section allows you to modify the contents of /etc/hotplug.d/iface/16-" -"mwancustom
This is useful for running system commands and/or scripts " -"based on interface ifup or ifdown hotplug events

Notes:
The " -"first line of the script must be "#!/bin/sh" without quotes
Lines beginning with # are comments and are not executed

Available variables:
$ACTION is the hotplug event (ifup, ifdown)
" -"$INTERFACE is the interface name (wan1, wan2, etc.)
$DEVICE is the " -"device name attached to the interface (eth0.1, eth1, etc.)" -msgstr "" -"このセクションでは、 /etc/hotplug.d/iface/16-mwancustom の内容を変更すること" -"ができます。
これは、インターフェースの ifup または ifdown ホットプラグ " -"イベント時にシステムコマンドまたはスクリプト、もしくはその両方を実行すること" -"に役立ちます。

注意:
スクリプトの1行目は、"#!bin/sh" " -"である必要があります（クオーテーション不要）。
# で始まる行はコメントと" -"して認識され、実行されません。

利用可能な変数:
$ACTION - ホッ" -"トプラグ イベント (ifup, ifdown)
$INTERFACE - インターフェース名（wan1, " -"wan2, その他）
$DEVICE - インターフェースにアタッチされたデバイスの名前" -"（eth0.1, eth1, その他）" - msgid "Tracking IP" msgstr "追跡 IP" msgid "Tracking hostname or IP address" msgstr "追跡ホスト名または IP アドレス" +msgid "Tracking method" +msgstr "" + msgid "Tracking reliability" msgstr "追跡の信頼性" @@ -654,6 +651,32 @@ msgstr "停止" msgid "unreachable (reject)" msgstr "unreachable (reject)" +#~ msgid "Restore default hotplug script" +#~ msgstr "デフォルトのホットプラグ スクリプトの復元" + +#~ msgid "Restore..." +#~ msgstr "復元..." + +#~ msgid "" +#~ "This section allows you to modify the contents of /etc/hotplug.d/iface/16-" +#~ "mwancustom
This is useful for running system commands and/or scripts " +#~ "based on interface ifup or ifdown hotplug events

Notes:
The first line of the script must be "#!/bin/sh" without " +#~ "quotes
Lines beginning with # are comments and are not executed

Available variables:
$ACTION is the hotplug event (ifup, " +#~ "ifdown)
$INTERFACE is the interface name (wan1, wan2, etc.)
" +#~ "$DEVICE is the device name attached to the interface (eth0.1, eth1, etc.)" +#~ msgstr "" +#~ "このセクションでは、 /etc/hotplug.d/iface/16-mwancustom の内容を変更するこ" +#~ "とができます。
これは、インターフェースの ifup または ifdown ホットプ" +#~ "ラグ イベント時にシステムコマンドまたはスクリプト、もしくはその両方を実行" +#~ "することに役立ちます。

注意:
スクリプトの1行目は、"#!" +#~ "bin/sh" である必要があります（クオーテーション不要）。
# で始まる" +#~ "行はコメントとして認識され、実行されません。

利用可能な変数:" +#~ "
$ACTION - ホットプラグ イベント (ifup, ifdown)
$INTERFACE - イ" +#~ "ンターフェース名（wan1, wan2, その他）
$DEVICE - インターフェースにア" +#~ "タッチされたデバイスの名前（eth0.1, eth1, その他）" + #~ msgid "" #~ "This IP address will be pinged to dermine if the link is up or down. " #~ "Leave blank to assume interface is always online" diff --git a/applications/luci-app-mwan3/po/templates/mwan3.pot b/applications/luci-app-mwan3/po/templates/mwan3.pot index 9e17c3d04..e63d8adc2 100644 --- a/applications/luci-app-mwan3/po/templates/mwan3.pot +++ b/applications/luci-app-mwan3/po/templates/mwan3.pot @@ -73,6 +73,9 @@ msgstr "" msgid "Enabled" msgstr "" +msgid "Enter value in hex, starting with 0x" +msgstr "" + msgid "Error collecting troubleshooting information" msgstr "" @@ -85,6 +88,9 @@ msgstr "" msgid "Failure interval" msgstr "" +msgid "Firewall mask" +msgstr "" + msgid "Flush conntrack table" msgstr "" @@ -330,12 +336,6 @@ msgstr "" msgid "Restart MWAN" msgstr "" -msgid "Restore default hotplug script" -msgstr "" - -msgid "Restore..." -msgstr "" - msgid "Rule" msgstr "" @@ -389,6 +389,20 @@ msgid "" "down. Leave blank to assume interface is always online" msgstr "" +msgid "" +"This section allows you to modify the content of \"/etc/mwan3.user\".
The file is also preserved during sysupgrade.

Notes:
This " +"file is interpreted as a shell script.
The first line of the script " +"must be "#!/bin/sh" without quotes.
Lines beginning with # are " +"comments and are not executed.
Put your custom mwan3 action here, they " +"will
be executed with each netifd hotplug interface event
on " +"interfaces for which mwan3 is enabled.

There are three main " +"environment variables that are passed to this script.

$ACTION " +"Either \"ifup\" or \"ifdown\"
$INTERFACE Name of the interface which " +"went up or down (e.g. \"wan\" or \"wwan\")
$DEVICE Physical device name " +"which interface went up or down (e.g. \"eth0\" or \"wwan0\")

" +msgstr "" + msgid "This section allows you to modify the contents of /etc/config/mwan3" msgstr "" @@ -398,17 +412,6 @@ msgstr "" msgid "This section allows you to modify the contents of /etc/config/wireless" msgstr "" -msgid "" -"This section allows you to modify the contents of /etc/hotplug.d/iface/16-" -"mwancustom
This is useful for running system commands and/or scripts " -"based on interface ifup or ifdown hotplug events

Notes:
The " -"first line of the script must be "#!/bin/sh" without quotes
Lines beginning with # are comments and are not executed

Available variables:
$ACTION is the hotplug event (ifup, ifdown)
" -"$INTERFACE is the interface name (wan1, wan2, etc.)
$DEVICE is the " -"device name attached to the interface (eth0.1, eth1, etc.)" -msgstr "" - msgid "Tracking IP" msgstr "" diff --git a/applications/luci-app-mwan3/po/zh-cn/mwan3.po b/applications/luci-app-mwan3/po/zh-cn/mwan3.po index 3c505d847..b133e8b1d 100644 --- a/applications/luci-app-mwan3/po/zh-cn/mwan3.po +++ b/applications/luci-app-mwan3/po/zh-cn/mwan3.po @@ -76,6 +76,9 @@ msgstr "当 Ping 成功次数达到这个数值后，已经被认为离线的接 msgid "Enabled" msgstr "启用" +msgid "Enter value in hex, starting with 0x" +msgstr "" + msgid "Error collecting troubleshooting information" msgstr "收集故障排除信息时出错" @@ -88,6 +91,9 @@ msgstr "" msgid "Failure interval" msgstr "故障检测间隔" +msgid "Firewall mask" +msgstr "" + msgid "Flush conntrack table" msgstr "刷新连接跟踪表" @@ -350,12 +356,6 @@ msgstr "故障恢复间隔" msgid "Restart MWAN" msgstr "重启 MWAN" -msgid "Restore default hotplug script" -msgstr "恢复默认的 hotplug 脚本" - -msgid "Restore..." -msgstr "恢复..." - msgid "Rule" msgstr "规则" @@ -416,6 +416,20 @@ msgid "" "down. Leave blank to assume interface is always online" msgstr "通过 ping 此主机或 IP 地址来确定链路是否在线。留空则认为接口始终在线" +msgid "" +"This section allows you to modify the content of \"/etc/mwan3.user\".
The file is also preserved during sysupgrade.

Notes:
This " +"file is interpreted as a shell script.
The first line of the script " +"must be "#!/bin/sh" without quotes.
Lines beginning with # are " +"comments and are not executed.
Put your custom mwan3 action here, they " +"will
be executed with each netifd hotplug interface event
on " +"interfaces for which mwan3 is enabled.

There are three main " +"environment variables that are passed to this script.

$ACTION " +"Either \"ifup\" or \"ifdown\"
$INTERFACE Name of the interface which " +"went up or down (e.g. \"wan\" or \"wwan\")
$DEVICE Physical device name " +"which interface went up or down (e.g. \"eth0\" or \"wwan0\")

" +msgstr "" + msgid "This section allows you to modify the contents of /etc/config/mwan3" msgstr "这里允许你修改 /etc/config/mwan3 的内容" @@ -425,29 +439,15 @@ msgstr "这里允许你修改 /etc/config/network 的内容" msgid "This section allows you to modify the contents of /etc/config/wireless" msgstr "这里允许你修改 /etc/config/wireless 的内容" -msgid "" -"This section allows you to modify the contents of /etc/hotplug.d/iface/16-" -"mwancustom
This is useful for running system commands and/or scripts " -"based on interface ifup or ifdown hotplug events

Notes:
The " -"first line of the script must be "#!/bin/sh" without quotes
Lines beginning with # are comments and are not executed

Available variables:
$ACTION is the hotplug event (ifup, ifdown)
" -"$INTERFACE is the interface name (wan1, wan2, etc.)
$DEVICE is the " -"device name attached to the interface (eth0.1, eth1, etc.)" -msgstr "" -"这里允许你修改 /etc/hotplug.d/iface/16-mwancustom 的内容
这可以在接口 " -"ifup 或 ifdown Hotplug 事件时运行系统命令或脚本

注意:
脚本的" -"第一行必须是 "#!/bin/sh" 不含引号
以＃开头的行是注释，不会执行" -"

可用变量:
$ACTION 是 Hotplug 事件（ifup, ifdown）
" -"$INTERFACE 是接口名称（wan1、wan2 等）
$DEVICE 是连接到接口的设备名称 " -"（eth0.1、eth1 等）" - msgid "Tracking IP" msgstr "追踪的 IP" msgid "Tracking hostname or IP address" msgstr "追踪的主机或 IP 地址" +msgid "Tracking method" +msgstr "" + msgid "Tracking reliability" msgstr "追踪可靠性" @@ -590,3 +590,26 @@ msgstr "" msgid "unreachable (reject)" msgstr "不可达（拒绝）" + +#~ msgid "Restore default hotplug script" +#~ msgstr "恢复默认的 hotplug 脚本" + +#~ msgid "Restore..." +#~ msgstr "恢复..." + +#~ msgid "" +#~ "This section allows you to modify the contents of /etc/hotplug.d/iface/16-" +#~ "mwancustom
This is useful for running system commands and/or scripts " +#~ "based on interface ifup or ifdown hotplug events

Notes:
The first line of the script must be "#!/bin/sh" without " +#~ "quotes
Lines beginning with # are comments and are not executed

Available variables:
$ACTION is the hotplug event (ifup, " +#~ "ifdown)
$INTERFACE is the interface name (wan1, wan2, etc.)
" +#~ "$DEVICE is the device name attached to the interface (eth0.1, eth1, etc.)" +#~ msgstr "" +#~ "这里允许你修改 /etc/hotplug.d/iface/16-mwancustom 的内容
这可以在接" +#~ "口 ifup 或 ifdown Hotplug 事件时运行系统命令或脚本

注意:
" +#~ "脚本的第一行必须是 "#!/bin/sh" 不含引号
以＃开头的行是注释，" +#~ "不会执行

可用变量:
$ACTION 是 Hotplug 事件（ifup, ifdown）" +#~ "
$INTERFACE 是接口名称（wan1、wan2 等）
$DEVICE 是连接到接口的设" +#~ "备名称 （eth0.1、eth1 等）"