e10 = e:option(Flag, "adb_notify", translate("Email Notification"),
translate("Send notification emails in case of a processing error or if domain count is ≤ 0.<br />")
- .. translate("Please note: this needs additional 'mstmp' package installation and setup."))
+ .. translate("Please note: this needs additional 'msmtp' package installation and setup."))
e10.default = e10.disabled
e10.rmempty = true
"Per favore modifica questo file direttamente in una sessione al terminale."
msgid ""
-"Please note: this needs additional 'mstmp' package installation and setup."
+"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
msgid "Please update your adblock config file to use this package.<br />"
msgstr ""
msgid ""
-"Size of the download queue to handle downloads & list processing in parallel "
+"Size of the download queue to handle downloads & list processing in parallel "
"(default '4').<br />"
msgstr ""
msgstr "ターミナル セッションで直接このファイルを編集してください。"
msgid ""
-"Please note: this needs additional 'mstmp' package installation and setup."
+"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
-"注意: これには、追加で 'mstmp' のインストールとセットアップが必要です。"
+"注意: これには、追加で 'msmtp' のインストールとセットアップが必要です。"
msgid "Please update your adblock config file to use this package.<br />"
msgstr ""
"処理エラーまたはドメイン カウントが0以下の場合、メールを送信します。<br />"
msgid ""
-"Size of the download queue to handle downloads & list processing in parallel "
+"Size of the download queue to handle downloads & list processing in parallel "
"(default '4').<br />"
msgstr ""
"ダウンロードの制御とリストの処理を同時並行的に行うダウンロード キューのサイズ"
msgstr "Por favor edite esse arquivo direto em uma sessão de terminal."
msgid ""
-"Please note: this needs additional 'mstmp' package installation and setup."
+"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
msgid "Please update your adblock config file to use this package.<br />"
msgstr ""
msgid ""
-"Size of the download queue to handle downloads & list processing in parallel "
+"Size of the download queue to handle downloads & list processing in parallel "
"(default '4').<br />"
msgstr ""
msgstr "Отредактируйте данный файл, строго в терминале."
msgid ""
-"Please note: this needs additional 'mstmp' package installation and setup."
-msgstr "Внимание: это потребует дополнительной установки пакета 'mstmp'."
+"Please note: this needs additional 'msmtp' package installation and setup."
+msgstr "Внимание: это потребует дополнительной установки пакета 'msmtp'."
msgid "Please update your adblock config file to use this package.<br />"
msgstr "Обновите config файл Adblock, чтобы использовать этот пакет.<br />"
"≤ 0.<br />"
msgid ""
-"Size of the download queue to handle downloads & list processing in parallel "
+"Size of the download queue to handle downloads & list processing in parallel "
"(default '4').<br />"
msgstr ""
"Значение очереди загрузки для выполнения параллельных загрузок (по умолчанию "
msgstr "Vänligen redigera den här filen direkt i en terminal-session."
msgid ""
-"Please note: this needs additional 'mstmp' package installation and setup."
+"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
msgid "Please update your adblock config file to use this package.<br />"
msgstr ""
msgid ""
-"Size of the download queue to handle downloads & list processing in parallel "
+"Size of the download queue to handle downloads & list processing in parallel "
"(default '4').<br />"
msgstr ""
msgstr ""
msgid ""
-"Please note: this needs additional 'mstmp' package installation and setup."
+"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
msgid "Please update your adblock config file to use this package.<br />"
msgstr ""
msgid ""
-"Size of the download queue to handle downloads & list processing in parallel "
+"Size of the download queue to handle downloads & list processing in parallel "
"(default '4').<br />"
msgstr ""
msgstr "请在终端会话中直接编辑此文件。"
msgid ""
-"Please note: this needs additional 'mstmp' package installation and setup."
+"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
msgid "Please update your adblock config file to use this package.<br />"
msgstr ""
msgid ""
-"Size of the download queue to handle downloads & list processing in parallel "
+"Size of the download queue to handle downloads & list processing in parallel "
"(default '4').<br />"
msgstr ""
msgstr "請在終端會話中直接編輯此檔案。"
msgid ""
-"Please note: this needs additional 'mstmp' package installation and setup."
+"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
msgid "Please update your adblock config file to use this package.<br />"
msgstr ""
msgid ""
-"Size of the download queue to handle downloads & list processing in parallel "
+"Size of the download queue to handle downloads & list processing in parallel "
"(default '4').<br />"
msgstr ""
rm -rf /tmp/luci-indexcache /tmp/luci-modulecache/
/etc/init.d/uhttpd restart
+/etc/init.d/rpcd reload
return 0
}
}
} else {
- error_box("<b>Ubus call faild:</b></br>Request: " + request_json + "</br>Response: " + JSON.stringify(response))
+ error_box("<b>Ubus call faild:</b><br />Request: " + request_json + "<br />Response: " + JSON.stringify(response))
}
ubus_closed++;
}
if(request_json.upgrades != undefined) {
info_output += "<h3>Package upgrades available</h3>"
for (upgrade in request_json.upgrades) {
- info_output += "<b>" + upgrade + "</b>: " + request_json.upgrades[upgrade][1] + " to " + request_json.upgrades[upgrade][0] + "</br>"
+ info_output += "<b>" + upgrade + "</b>: " + request_json.upgrades[upgrade][1] + " to " + request_json.upgrades[upgrade][0] + "<br />"
}
}
data.packages = request_json.packages
var filename_split = data.sysupgrade_url.split("/")
data.filename = filename_split[filename_split.length - 1]
- info_output = "Firmware created</br><b>" + data.filename + "</b>"
+ info_output = 'Firmware created: <a href="' + data.sysupgrade_url + '"><b>' + data.filename + '</b></a>'
if(data.advanced_mode == 1) {
- info_output += '</br><a target="_blank" href="' + data.sysupgrade_url + '.log">Build log</a>'
+ info_output += '<br /><a target="_blank" href="' + data.sysupgrade_url + '.log">Build log</a>'
}
info_box(info_output);
error_box("No firmware created due to image size. Try again with less packages selected.")
} else if (request.status === 422) {
- error_box("Unknown package in request")
-
+ var package_missing = response.getResponseHeader("X-Unknown-Package");
+ error_box("Unknown package in request: <b>" + package_missing + "</b>")
} else if (request.status === 500) {
request_json = JSON.parse(request_text)
- error_box_content = "<b>Internal server error</b></br>"
+ error_box_content = "<b>Internal server error</b><br />"
error_box_content += request_json.error
if(request_json.log != undefined) {
data.log_url = request_json.log
local trackingNumber = uci:get("mwan3", iface, "track_ip")
overview[iface]["tracking"] = 0
- if #trackingNumber > 0 then
+ if trackingNumber and #trackingNumber > 0 then
overview[iface]["tracking"] = #trackingNumber
overview[iface]["reliability"] = false
local reliabilityNumber = tonumber(uci:get("mwan3", iface, "reliability"))
for ( var iface in status.interfaces)
{
var state = '';
- var css = '';
switch (status.interfaces[iface].status)
{
case 'online':
state = '<%:Online (tracking active)%>';
- css = 'wanon';
break;
case 'notMonitored':
state = '<%:Online (tracking off)%>';
- css = 'wanon';
break;
case 'offline':
state = '<%:Offline%>';
- css = 'wanoff';
break;
default:
state = '<%:Disabled%>';
- css = 'wanoff';
break;
}
statusview += String.format(
- '<span class="%s"><strong>%s</strong><br />%s</span>',
- css,
- iface,
+ '<div><strong>Interface: </strong>%s</div>',
+ iface
+ );
+ statusview += String.format(
+ '<div><strong>Status: </strong>%s</div></br></br>',
state
);
}
//]]></script>
<fieldset id="interface_field" class="cbi-section">
- <legend><%:MWAN Interface Live Status%></legend>
- <div id="mwan_status_text"><img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" style="vertical-align:middle" /><%:Collecting data...%></div>
+ <legend><%:MWAN Interfaces%></legend>
+ <div id="mwan_status_text">
+ <img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" style="vertical-align:middle" /><%:Collecting data...%>
+ </div>
</fieldset>
-
-<style type="text/css">
- .container { /* container for entire page. fixes bootstrap theme's ridiculously small page width */
- max-width: 1044px;
- }
- #mwan_status_text {
- display: table;
- font-size: 14px;
- margin: auto;
- max-width: 1044px;
- min-width: 246px;
- width: 100%;
- }
- .wanon {
- background-color: rgb(144, 240, 144);
- }
- .wanoff {
- background-color: rgb(240, 144, 144);
- }
- .wanon, .wanoff {
- border-radius: 60px;
- box-shadow: 0px 2px 5px -3px;
- float: left;
- margin: 8px 3px 0px 3px;
- min-height: 30px;
- min-width: 235px;
- padding: 5px 10px 8px 10px;
- text-align: center;
- }
-</style>
</ul>
<script type="text/javascript" src="<%=resource%>/cbi.js"></script>
-<script type="text/javascript">//<![CDATA[
- XHR.poll(5, '<%=luci.dispatcher.build_url("admin", "status", "mwan", "interface_status")%>', null,
- function(x, status)
- {
- var legend = document.getElementById('diag-rc-legend');
- var statusDiv = document.getElementById('diag-rc-output');
- legend.style.display = 'none';
- if (status.interfaces)
- {
- var statusview = '';
- for ( var iface in status.interfaces)
- {
- var state = '';
- var css = '';
- switch (status.interfaces[iface].status)
- {
- case 'online':
- state = '<%:Online (tracking active)%>';
- css = 'wanon';
- break;
- case 'notMonitored':
- state = '<%:Online (tracking off)%>';
- css = 'wanon';
- break;
- case 'offline':
- state = '<%:Offline%>';
- css = 'wanoff';
- break;
- default:
- state = '<%:Disabled%>';
- css = 'wanoff';
- break;
- }
- statusview += String.format(
- '<span class="%s"><strong>%s</strong><br />%s</span>',
- css,
- iface,
- state
- );
- }
- statusDiv.innerHTML = statusview;
- }
- else
- {
- statusDiv.innerHTML = '<strong><%:No MWAN interfaces found%></strong>';
- }
- }
- );
-//]]></script>
-<div class="cbi-map">
- <h2 name="content"><%:MWAN Status - Interface%></h2>
- <%if not require("luci.sys").init.enabled("mwan3") then%>
- <div><strong><%:INFO: MWAN not running%></strong></div>
- <%end%>
- <fieldset class="cbi-section">
- <legend id="diag-rc-legend"><%:Collecting data...%></legend>
- <span id="diag-rc-output">
- <img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" style="vertical-align: middle;" />
- </span>
- </fieldset>
-</div>
-
-<style type="text/css">
- #mwan_status_text {
- display: table;
- font-size: 14px;
- margin: auto;
- max-width: 1044px;
- min-width: 246px;
- width: 100%;
- }
- .wanon {
- background-color: rgb(144, 240, 144);
- }
- .wanoff {
- background-color: rgb(240, 144, 144);
- }
- .wanon, .wanoff {
- border-radius: 60px;
- box-shadow: 0px 2px 5px -3px;
- float: left;
- margin: 8px 3px 0px 3px;
- min-height: 30px;
- min-width: 235px;
- padding: 5px 10px 8px 10px;
- text-align: center;
- }
- #mwan_statuslog_text {
- padding: 20px;
- text-align: left;
- }
-</style>
+<%+mwan/overview_status_interface%>
<%+footer%>
module("luci.statistics.rrdtool.definitions.apcups",package.seeall)
-function rrdargs( graph, plugin, plugin_instance, dtype )
+function rrdargs( graph, plugin, plugin_instance )
+
+ local lu = require("luci.util")
+ local rv = { }
+
+ -- Types and instances supported by APC UPS
+ -- e.g. ups_types -> { 'timeleft', 'charge', 'percent', 'voltage' }
+ -- e.g. ups_inst['voltage'] -> { 'input', 'battery' }
+
+ local ups_types = graph.tree:data_types( plugin, plugin_instance )
+
+ local ups_inst = {}
+ for _, t in ipairs(ups_types) do
+ ups_inst[t] = graph.tree:data_instances( plugin, plugin_instance, t )
+ end
+
+
+ -- Check if hash table or array is empty or nil-filled
+
+ local function empty( t )
+ for _, v in pairs(t) do
+ if type(v) then return false end
+ end
+ return true
+ end
+
+
+ -- Append graph definition but only types/instances which are
+ -- supported and available to the plugin and UPS.
+
+ local function add_supported( t, defs )
+ local def_inst = defs['data']['instances']
+
+ if type(def_inst) == "table" then
+ for k, v in pairs( def_inst ) do
+ if lu.contains( ups_types, k) then
+ for j = #v, 1, -1 do
+ if not lu.contains( ups_inst[k], v[j] ) then
+ table.remove( v, j )
+ end
+ end
+ if #v == 0 then
+ def_inst[k] = nil -- can't assign v: immutable
+ end
+ else
+ def_inst[k] = nil -- can't assign v: immutable
+ end
+ end
+ if empty(def_inst) then return end
+ end
+ table.insert( t, defs )
+ end
+
+
+ -- Graph definitions for APC UPS measurements MUST use only 'instances':
+ -- e.g. instances = { voltage = { "input", "output" } }
local voltagesdc = {
title = "%H: Voltages on APC UPS - Battery",
vlabel = "Volts DC",
- alt_autoscale = true,
+ alt_autoscale = true,
number_format = "%5.1lfV",
data = {
instances = {
voltage = { "battery" }
},
-
- options = {
+ options = {
voltage = { title = "Battery voltage", noarea=true }
}
}
}
-
- local voltages = {
+ add_supported( rv, voltagesdc )
+
+ local voltagesac = {
title = "%H: Voltages on APC UPS - AC",
vlabel = "Volts AC",
alt_autoscale = true,
instances = {
voltage = { "input", "output" }
},
-
options = {
voltage_output = { color = "00e000", title = "Output voltage", noarea=true, overlay=true },
voltage_input = { color = "ffb000", title = "Input voltage", noarea=true, overlay=true }
}
}
}
+ add_supported( rv, voltagesac )
local percentload = {
title = "%H: Load on APC UPS ",
y_max = "100",
number_format = "%5.1lf%%",
data = {
- sources = {
- percent_load = { "value" }
- },
instances = {
- percent = "load"
+ percent = { "load" }
},
options = {
percent_load = { color = "00ff00", title = "Load level" }
}
}
}
+ add_supported( rv, percentload )
local charge_percent = {
title = "%H: Battery charge on APC UPS ",
y_max = "100",
number_format = "%5.1lf%%",
data = {
- types = { "charge" },
+ instances = {
+ charge = { "" }
+ },
options = {
charge = { color = "00ff0b", title = "Charge level" }
}
}
}
+ add_supported( rv, charge_percent )
local temperature = {
title = "%H: Battery temperature on APC UPS ",
vlabel = "\176C",
number_format = "%5.1lf\176C",
data = {
- types = { "temperature" },
+ instances = {
+ temperature = { "" }
+ },
options = {
temperature = { color = "ffb000", title = "Battery temperature" } }
}
}
+ add_supported( rv, temperature )
local timeleft = {
title = "%H: Time left on APC UPS ",
vlabel = "Minutes",
number_format = "%.1lfm",
data = {
- sources = {
- timeleft = { "value" }
+ instances = {
+ timeleft = { "" }
},
options = {
timeleft = { color = "0000ff", title = "Time left" }
}
}
}
+ add_supported( rv, timeleft )
local frequency = {
title = "%H: Incoming line frequency on APC UPS ",
vlabel = "Hz",
number_format = "%5.0lfhz",
data = {
- sources = {
- frequency_input = { "value" }
- },
instances = {
- frequency = "frequency"
+ frequency = { "input" }
},
options = {
- frequency_frequency = { color = "000fff", title = "Line frequency" }
+ frequency_input = { color = "000fff", title = "Line frequency" }
}
}
}
+ add_supported( rv, frequency )
- return { voltages, voltagesdc, percentload, charge_percent, temperature, timeleft, frequency }
+ return rv
end
-# Copyright 2017 Dirk Brenken (dev@brenken.org)
+# Copyright 2017-2018 Dirk Brenken (dev@brenken.org)
# This is free software, licensed under the Apache License, Version 2.0
#
include $(TOPDIR)/rules.mk
LUCI_TITLE:=LuCI support for Travelmate
-LUCI_DEPENDS:=+travelmate +luci-lib-jsonc
+LUCI_DEPENDS:=+travelmate +luci-lib-jsonc +qrencode
LUCI_PKGARCH:=all
include ../../luci.mk
module("luci.controller.travelmate", package.seeall)
-local fs = require("nixio.fs")
local util = require("luci.util")
local i18n = require("luci.i18n")
local templ = require("luci.template")
entry({"admin", "services", "travelmate"}, firstchild(), _("Travelmate"), 40).dependent = false
entry({"admin", "services", "travelmate", "tab_from_cbi"}, cbi("travelmate/overview_tab", {hideresetbtn=true, hidesavebtn=true}), _("Overview"), 10).leaf = true
entry({"admin", "services", "travelmate", "stations"}, template("travelmate/stations"), _("Wireless Stations"), 20).leaf = true
- entry({"admin", "services", "travelmate", "logfile"}, call("logread"), _("View Logfile"), 30).leaf = true
+ entry({"admin", "services", "travelmate", "apqr"}, template("travelmate/ap_qr"), _("AP QR-Codes"), 30).leaf = true
+ entry({"admin", "services", "travelmate", "logfile"}, call("logread"), _("View Logfile"), 40).leaf = true
entry({"admin", "services", "travelmate", "advanced"}, firstchild(), _("Advanced"), 100)
entry({"admin", "services", "travelmate", "advanced", "configuration"}, cbi("travelmate/configuration_tab"), _("Edit Travelmate Configuration"), 110).leaf = true
entry({"admin", "services", "travelmate", "advanced", "cfg_wireless"}, cbi("travelmate/cfg_wireless_tab"), _("Edit Wireless Configuration"), 120).leaf = true
e2.rmempty = true
e3 = e:option(Value, "trm_maxretry", translate("Connection Limit"),
- translate("Retry limit to connect to an uplink. ")
- .. translate("To disable this feature set it to '0' which means unlimited retries."))
+ translate("Retry limit to connect to an uplink."))
e3.default = 3
-e3.datatype = "range(0,30)"
+e3.datatype = "range(1,10)"
e3.rmempty = false
e4 = e:option(Value, "trm_minquality", translate("Signal Quality Threshold"),
translate("Minimum signal quality threshold as percent for conditional uplink (dis-) connections."))
-e4.default = 30
-e4.datatype = "range(0,100)"
+e4.default = 35
+e4.datatype = "range(20,80)"
e4.rmempty = false
e5 = e:option(Value, "trm_maxwait", translate("Interface Timeout"),
- translate("How long should travelmate wait for a successful wlan interface reload."))
+ translate("How long should travelmate wait for a successful wlan uplink connection."))
e5.default = 30
-e5.datatype = "range(5,60)"
+e5.datatype = "range(20,40)"
e5.rmempty = false
e6 = e:option(Value, "trm_timeout", translate("Overall Timeout"),
translate("Timeout in seconds between retries in 'automatic' mode."))
e6.default = 60
-e6.datatype = "range(60,300)"
+e6.datatype = "range(30,300)"
e6.rmempty = false
return m
--- /dev/null
+<%#
+Copyright 2018 Dirk Brenken (dev@brenken.org)
+This is free software, licensed under the Apache License, Version 2.0
+-%>
+
+<%+header%>
+
+<div class="cbi-map">
+ <div class="cbi-map-descr">
+ <%=translate("Here you'll find the QR codes from all of your configured Access Points. It allows you to connect your Android or iOS devices to your router's WiFi using the QR code shown below.")%>
+ </div>
+<%-
+ local write = io.write
+ local uci = require("luci.model.uci").cursor()
+
+ uci:foreach("wireless", "wifi-iface", function(s)
+ local device = s.device or ""
+ local mode = s.mode or ""
+ local ssid = s.ssid or ""
+ local enc = s.encryption or ""
+ local key = s.key or ""
+ local hidden = s.hidden or "false"
+ local disabled = s.disabled or ""
+ local wep_slots = {s.key1 or "", s.key2 or "", s.key3 or "", s.key4 or ""}
+
+ if device and mode == "ap" and disabled ~= "1" then
+ if string.match(enc, '^psk') then
+ enc = "WPA"
+ elseif string.match(enc, '^wep') then
+ enc = "WEP"
+ if tonumber(key) then
+ key = wep_slots[tonumber(key)]
+ end
+ elseif enc == "none" then
+ enc = "nopass"
+ key = "nokey"
+ else
+ enc = ""
+ end
+ if hidden == "1" then
+ hidden = "true"
+ end
+ if ssid and enc and key then
+ local e_ssid = string.gsub(ssid,"[\"\\';:, ]",[[\\\%1]])
+ local e_key = string.gsub(key,"[\"\\';:, ]",[[\\\%1]])
+ local qrcode = ""
+ if nixio.fs.access("/usr/bin/qrencode") then
+ qrcode = luci.sys.exec("/usr/bin/qrencode --inline --8bit --type=SVG --output=- 'WIFI:S:\"'" .. e_ssid .. "'\";T:'" .. enc .. "';P:\"'" .. e_key .. "'\";H:'" .. hidden .. "';'")
+ end
+-%>
+ <fieldset class="cbi-section">
+ <legend>AP on <%=device%> with SSID "<%=ssid%>"</legend>
+ <h3 name="content"><%=qrcode%></h3>
+ </fieldset>
+<%-
+ end
+ end
+ end)
+%>
+</div>
+
+<%+footer%>
<%+header%>
<div class="cbi-map">
-<h2 name="content"><%:Wireless Stations%></h2>
<div class="cbi-map-descr">
<%=translatef("Provides an overview of all configured uplinks for the travelmate interface (%s). You can edit, delete or re-order existing uplinks or scan for a new one. The currently used uplink is emphasized in blue.", trmiface)%>
</div>
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 2.0.5\n"
+"X-Generator: Poedit 2.0.6\n"
"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"Language: ja\n"
+msgid "AP QR-Codes"
+msgstr "AP QR-コード"
+
msgid "Actions"
msgstr "操作"
msgid "Back to overview"
msgstr "概要へ戻る"
+msgid "Captive Portal Detection"
+msgstr "キャプティブポータル検知"
+
+msgid ""
+"Check the internet availability, log captive portal redirections and keep "
+"the uplink connection 'alive'."
+msgstr ""
+"インターネットの利用可否を確認し、キャプティブポータル リダイレクトを記録して"
+"アップリンク接続を 'alive' として保持します。"
+
msgid "Cipher"
msgstr "暗号化方式"
msgstr ""
"'trigger' モード時に、手動でアップリンクの再スキャンと再接続を行います。"
-msgid "How long should travelmate wait for a successful wlan interface reload."
+msgid ""
+"Here you'll find the QR codes from all of your configured Access Points. It "
+"allows you to connect your Android or iOS devices to your router's WiFi "
+"using the QR code shown below."
msgstr ""
-"無線LAN インターフェースのリロードが成功するまでの、Travelmate の待機時間で"
-"す。"
+"ここには、構成済みの全アクセスポイントの QR コードを表示しています。以下の "
+"QR コードを使用して、 Android または iOS デバイスをルータの WiFi に接続するこ"
+"とができます。"
-msgid "How many times should travelmate try to connect to an Uplink."
-msgstr "Travelmate がアップリンクへの接続を試行する回数です。"
+msgid ""
+"How long should travelmate wait for a successful wlan uplink connection."
+msgstr "Travelmate が無線アップリンクへの接続成功を待つ時間です。"
msgid "Identity"
msgstr "ID"
msgid "Manual Rescan"
msgstr "手動再スキャン"
+msgid ""
+"Minimum signal quality threshold as percent for conditional uplink (dis-) "
+"connections."
+msgstr ""
+"条件付きアップリンク接続(または切断)のための、シグナル品質閾値の下限(%)で"
+"す。"
+
msgid "Move down"
msgstr "下へ"
msgid "Restrict travelmate to a dedicated radio, e.g. 'radio0'."
msgstr "Travelmate が指定された無線に接続するよう制御します。(例: 'radio0')"
+msgid "Retry limit to connect to an uplink."
+msgstr "アップリンクへの接続を試行する回数です。"
+
msgid "Runtime Information"
msgstr "実行情報"
msgid "Scan"
msgstr "スキャン:"
+msgid "Signal Quality Threshold"
+msgstr "シグナル品質閾値"
+
msgid "Signal strength"
msgstr "信号強度"
msgid "Timeout in seconds between retries in 'automatic' mode."
msgstr "'automatic' モード時に接続を確認または再試行する間隔(秒)です。"
-msgid "To disable this feature set it to '0' which means unlimited retries."
-msgstr ""
-"この機能を無効にして接続の再試行を無制限にする場合、 '0' を設定します。"
-
msgid "Travelmate"
msgstr "Travelmate"
msgid "Travelmate Logfile"
msgstr "Travelmate ログファイル"
-msgid "Travelmate Status"
-msgstr "Travelmate ステータス"
+msgid "Travelmate Status (Quality)"
+msgstr "Travelmate ステータス(品質)"
msgid "Travelmate Version"
msgstr "Travelmate バージョン"
-msgid "Trigger delay"
-msgstr "トリガー遅延"
+msgid "Trigger Delay"
+msgstr "トリガ遅延"
msgid "Unknown"
msgstr "不明"
"ファイアウォールの wan ゾーンに追加します。このステップは、一度だけ実行される"
"必要があります。"
-msgid "connected"
-msgstr "接続済"
-
-msgid "error"
-msgstr "エラー"
-
msgid "hidden"
msgstr "(不明)"
msgid "n/a"
msgstr "利用不可"
-
-msgid "not connected"
-msgstr "未接続"
-
-msgid "running"
-msgstr "実行中"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
"Language: pt_BR\n"
+msgid "AP QR-Codes"
+msgstr ""
+
msgid "Actions"
msgstr ""
msgid "Back to overview"
msgstr ""
+msgid "Captive Portal Detection"
+msgstr ""
+
+msgid ""
+"Check the internet availability, log captive portal redirections and keep "
+"the uplink connection 'alive'."
+msgstr ""
+
msgid "Cipher"
msgstr ""
msgid "Force a manual uplink rescan / reconnect in 'trigger' mode."
msgstr ""
-msgid "How long should travelmate wait for a successful wlan interface reload."
+msgid ""
+"Here you'll find the QR codes from all of your configured Access Points. It "
+"allows you to connect your Android or iOS devices to your router's WiFi "
+"using the QR code shown below."
msgstr ""
-msgid "How many times should travelmate try to connect to an Uplink."
+msgid ""
+"How long should travelmate wait for a successful wlan uplink connection."
msgstr ""
msgid "Identity"
msgid "Manual Rescan"
msgstr ""
+msgid ""
+"Minimum signal quality threshold as percent for conditional uplink (dis-) "
+"connections."
+msgstr ""
+
msgid "Move down"
msgstr ""
msgid "Restrict travelmate to a dedicated radio, e.g. 'radio0'."
msgstr ""
+msgid "Retry limit to connect to an uplink."
+msgstr ""
+
msgid "Runtime Information"
msgstr ""
msgid "Scan"
msgstr ""
+msgid "Signal Quality Threshold"
+msgstr ""
+
msgid "Signal strength"
msgstr ""
msgid "Timeout in seconds between retries in 'automatic' mode."
msgstr ""
-msgid "To disable this feature set it to '0' which means unlimited retries."
-msgstr ""
-
msgid "Travelmate"
msgstr "Travelmate"
msgid "Travelmate Logfile"
msgstr ""
-msgid "Travelmate Status"
+msgid "Travelmate Status (Quality)"
msgstr ""
msgid "Travelmate Version"
msgstr ""
-msgid "Trigger delay"
+msgid "Trigger Delay"
msgstr ""
msgid "Unknown"
"add it to the wan zone of the firewall. This step has only to be done once."
msgstr ""
-msgid "connected"
-msgstr ""
-
-msgid "error"
-msgstr ""
-
msgid "hidden"
msgstr ""
msgid "n/a"
msgstr ""
-msgid "not connected"
-msgstr ""
-
-msgid "running"
-msgstr ""
-
#~ msgid ""
#~ "Brief advice: Create a wwan interface, configure it to use dhcp and add "
#~ "it to the wan zone in firewall. Create the wifi interfaces to be used "
"Project-Info: Это технический перевод, не дословный. Главное-удобный русский "
"интерфейс, все проверялось в графическом режиме, совместим с другими apps\n"
+msgid "AP QR-Codes"
+msgstr ""
+
msgid "Actions"
msgstr "Действия"
msgid "Back to overview"
msgstr "Назад в меню"
+msgid "Captive Portal Detection"
+msgstr ""
+
+msgid ""
+"Check the internet availability, log captive portal redirections and keep "
+"the uplink connection 'alive'."
+msgstr ""
+
msgid "Cipher"
msgstr "Алгоритм шифрования"
"Принудительно выполнить повторное сканирование/повторное подключение внешних "
"сетей в режиме 'ручной'."
-msgid "How long should travelmate wait for a successful wlan interface reload."
+msgid ""
+"Here you'll find the QR codes from all of your configured Access Points. It "
+"allows you to connect your Android or iOS devices to your router's WiFi "
+"using the QR code shown below."
msgstr ""
-"Временная задержка необходима TravelMate для полной перезагрузки wlan "
-"интерфейса."
-msgid "How many times should travelmate try to connect to an Uplink."
-msgstr "Сколько раз TravelMate должен пытаться подключиться к сети. "
+msgid ""
+"How long should travelmate wait for a successful wlan uplink connection."
+msgstr ""
msgid "Identity"
msgstr "Идентификация EAP"
msgid "Manual Rescan"
msgstr "Поиск сети вручную"
+msgid ""
+"Minimum signal quality threshold as percent for conditional uplink (dis-) "
+"connections."
+msgstr ""
+
msgid "Move down"
msgstr "Переместить вниз"
msgid "Restrict travelmate to a dedicated radio, e.g. 'radio0'."
msgstr "Выделить TravelMate-у конкретное Wi-Fi устройство, например 'radio0'."
+msgid "Retry limit to connect to an uplink."
+msgstr ""
+
msgid "Runtime Information"
msgstr "Информация о состоянии"
msgid "Scan"
msgstr "Поиск"
+msgid "Signal Quality Threshold"
+msgstr ""
+
msgid "Signal strength"
msgstr "Мощность сигнала"
"Время ожидания в секундах между повторными попытками соединения в режиме "
"'автоматически'."
-msgid "To disable this feature set it to '0' which means unlimited retries."
-msgstr ""
-"<br />Чтобы отключить эту функцию, установите значение '0', что означает "
-"неограниченное количество попыток."
-
msgid "Travelmate"
msgstr "TravelMate"
msgid "Travelmate Logfile"
msgstr "Системный журнал TravelMate"
-msgid "Travelmate Status"
-msgstr "Состояние Travelmate"
+msgid "Travelmate Status (Quality)"
+msgstr ""
msgid "Travelmate Version"
msgstr "Версия TravelMate"
-msgid "Trigger delay"
-msgstr "Задержка запуска"
+msgid "Trigger Delay"
+msgstr ""
msgid "Unknown"
msgstr "Неизвестно"
"add it to the wan zone of the firewall. This step has only to be done once."
msgstr "добавить в wan зону межсетевого экрана. Можно сделать только один раз."
-msgid "connected"
-msgstr "подключен"
-
-msgid "error"
-msgstr "ошибка"
-
msgid "hidden"
msgstr "скрытый"
msgid "n/a"
msgstr "нет данных"
-msgid "not connected"
-msgstr "не подключено"
+#~ msgid ""
+#~ "How long should travelmate wait for a successful wlan interface reload."
+#~ msgstr ""
+#~ "Временная задержка необходима TravelMate для полной перезагрузки wlan "
+#~ "интерфейса."
+
+#~ msgid "How many times should travelmate try to connect to an Uplink."
+#~ msgstr "Сколько раз TravelMate должен пытаться подключиться к сети. "
+
+#~ msgid "To disable this feature set it to '0' which means unlimited retries."
+#~ msgstr ""
+#~ "<br />Чтобы отключить эту функцию, установите значение '0', что означает "
+#~ "неограниченное количество попыток."
+
+#~ msgid "Travelmate Status"
+#~ msgstr "Состояние Travelmate"
+
+#~ msgid "Trigger delay"
+#~ msgstr "Задержка запуска"
+
+#~ msgid "connected"
+#~ msgstr "подключен"
+
+#~ msgid "error"
+#~ msgstr "ошибка"
+
+#~ msgid "not connected"
+#~ msgstr "не подключено"
-msgid "running"
-msgstr "работает"
+#~ msgid "running"
+#~ msgstr "работает"
msgid ""
msgstr "Content-Type: text/plain; charset=UTF-8"
+msgid "AP QR-Codes"
+msgstr ""
+
msgid "Actions"
msgstr ""
msgid "Back to overview"
msgstr ""
+msgid "Captive Portal Detection"
+msgstr ""
+
+msgid ""
+"Check the internet availability, log captive portal redirections and keep "
+"the uplink connection 'alive'."
+msgstr ""
+
msgid "Cipher"
msgstr ""
msgid "Force a manual uplink rescan / reconnect in 'trigger' mode."
msgstr ""
-msgid "How long should travelmate wait for a successful wlan interface reload."
+msgid ""
+"Here you'll find the QR codes from all of your configured Access Points. It "
+"allows you to connect your Android or iOS devices to your router's WiFi "
+"using the QR code shown below."
msgstr ""
-msgid "How many times should travelmate try to connect to an Uplink."
+msgid ""
+"How long should travelmate wait for a successful wlan uplink connection."
msgstr ""
msgid "Identity"
msgid "Manual Rescan"
msgstr ""
+msgid ""
+"Minimum signal quality threshold as percent for conditional uplink (dis-) "
+"connections."
+msgstr ""
+
msgid "Move down"
msgstr ""
msgid "Restrict travelmate to a dedicated radio, e.g. 'radio0'."
msgstr ""
+msgid "Retry limit to connect to an uplink."
+msgstr ""
+
msgid "Runtime Information"
msgstr ""
msgid "Scan"
msgstr ""
+msgid "Signal Quality Threshold"
+msgstr ""
+
msgid "Signal strength"
msgstr ""
msgid "Timeout in seconds between retries in 'automatic' mode."
msgstr ""
-msgid "To disable this feature set it to '0' which means unlimited retries."
-msgstr ""
-
msgid "Travelmate"
msgstr ""
msgid "Travelmate Logfile"
msgstr ""
-msgid "Travelmate Status"
+msgid "Travelmate Status (Quality)"
msgstr ""
msgid "Travelmate Version"
msgstr ""
-msgid "Trigger delay"
+msgid "Trigger Delay"
msgstr ""
msgid "Unknown"
"add it to the wan zone of the firewall. This step has only to be done once."
msgstr ""
-msgid "connected"
-msgstr ""
-
-msgid "error"
-msgstr ""
-
msgid "hidden"
msgstr ""
msgid "n/a"
msgstr ""
-
-msgid "not connected"
-msgstr ""
-
-msgid "running"
-msgstr ""
config 'community' 'profile'
option 'name' 'Freifunk Potsdam'
option 'homepage' 'http://potsdam.freifunk.net'
- option 'ssid' 'Freifunk-Potsdam-XXX-YYY'
+ option 'ssid' 'freifunk-potsdam.de'
option 'mesh_network' '10.22.0.0/16'
option 'splash_network' '192.168.22.0/24'
option 'splash_prefix' '24'
function del_network(self, n)
local r = _uci:delete("network", n)
if r then
+ _uci:delete_all("luci", "ifstate",
+ function(s) return (s.interface == n) end)
+
_uci:delete_all("network", "alias",
function(s) return (s.interface == n) end)
if type(addrs) == "table" then
for n, addr in ipairs(addrs) do
- if type(addr["local-address"]) == "table" then
+ if type(addr["local-address"]) == "table" and
+ type(addr["local-address"].mask) == "number" and
+ type(addr["local-address"].address) == "string"
+ then
rv[#rv+1] = "%s/%d" %{
addr["local-address"].address,
addr["local-address"].mask
m = Map("network", translate("Interfaces") .. " - " .. arg[1]:upper(), translate("On this page you can configure the network interfaces. You can bridge several interfaces by ticking the \"bridge interfaces\" field and enter the names of several network interfaces separated by spaces. You can also use <abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation <samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: <samp>eth0.1</samp>)."))
m.redirect = luci.dispatcher.build_url("admin", "network", "network")
m:chain("wireless")
+m:chain("luci")
if has_firewall then
m:chain("firewall")
local net = nw:get_network(arg[1])
+local function set_ifstate(name, option, value)
+ local found = false
+
+ m.uci:foreach("luci", "ifstate", function (s)
+ if s.interface == name then
+ m.uci:set("luci", s[".name"], option, value)
+ found = true
+ return false
+ end
+ end)
+
+ if not found then
+ local sid = m.uci:add("luci", "ifstate")
+ m.uci:set("luci", sid, "interface", name)
+ m.uci:set("luci", sid, option, value)
+ end
+
+ m.uci:save("luci")
+end
+
+local function get_ifstate(name, option)
+ local val
+
+ m.uci:foreach("luci", "ifstate", function (s)
+ if s.interface == name then
+ val = m.uci:get("luci", s[".name"], option)
+ return false
+ end
+ end)
+
+ return val
+end
+
local function backup_ifnames(is_bridge)
- if not net:is_floating() and not m:get(net:name(), "_orig_ifname") then
+ if not net:is_floating() and not get_ifstate(net:name(), "ifname") then
local ifcs = net:get_interfaces() or { net:get_interface() }
if ifcs then
local _, ifn
local ifns = { }
for _, ifn in ipairs(ifcs) do
- ifns[#ifns+1] = ifn:name()
+ local wif = ifn:get_wifinet()
+ ifns[#ifns+1] = wif and wif:id() or ifn:name()
end
if #ifns > 0 then
- m:set(net:name(), "_orig_ifname", table.concat(ifns, " "))
- m:set(net:name(), "_orig_bridge", tostring(net:is_bridge()))
+ set_ifstate(net:name(), "ifname", table.concat(ifns, " "))
+ set_ifstate(net:name(), "bridge", tostring(net:is_bridge()))
end
end
end
elseif net:is_floating() and not proto:is_floating() then
-- if we have backup data, then re-add all orphaned interfaces
-- from it and restore the bridge choice
- local br = (m:get(net:name(), "_orig_bridge") == "true")
+ local br = (get_ifstate(net:name(), "bridge") == "true")
local ifn
local ifns = { }
- for ifn in ut.imatch(m:get(net:name(), "_orig_ifname")) do
+ for ifn in ut.imatch(get_ifstate(net:name(), "ifname")) do
ifn = nw:get_interface(ifn)
if ifn and not ifn:get_network() then
proto:add_interface(ifn)
for k, v in pairs(m:get(net:name())) do
if k:sub(1,1) ~= "." and
k ~= "type" and
- k ~= "ifname" and
- k ~= "_orig_ifname" and
- k ~= "_orig_bridge"
+ k ~= "ifname"
then
m:del(net:name(), k)
end