applications/meshwizard: Add ipv6 config options

diff --git a/applications/luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua b/applications/luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua
index bb65635..f4478f6 100644 (file)
--- a/applications/luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua
+++ b/applications/luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua
@@ -6,19 +6,22 @@ local util = require "luci.util"
 local ip = require "luci.ip"
 
 local community = "profile_" .. (uci:get("freifunk", "community", "name") or "Freifunk")
-mesh_network = ip.IPv4(uci:get_first(community, "community", "mesh_network") or "10.0.0.0/8")
+local mesh_network = ip.IPv4(uci:get_first(community, "community", "mesh_network") or "10.0.0.0/8")
+local community_ipv6 = uci:get_first(community, "community", "ipv6") or 0
+local community_ipv6mode = uci:get_first(community, "community", "ipv6_config") or "static"
+local meshkit_ipv6 = uci:get("meshwizard", "ipv6", "enabled") or 0
 
 m = Map("meshwizard", translate("Wizard"), translate("This wizard will assist you in setting up your router for Freifunk " ..
        "or another similar wireless community network."))
---m:chain("meshwizard")
 
-n = m:section(TypedSection, "netconfig", translate("Interfaces"))
+n = m:section(NamedSection, "netconfig", nil, translate("Interfaces"))
 n.anonymous = true
 
 -- common functions
 
 function cbi_configure(device)
-       local configure = n:taboption(device, Flag, device .. "_config", translate("Configure this interface"))
+       local configure = n:taboption(device, Flag, device .. "_config", translate("Configure this interface"),
+               translate("Note: this will setup this interface for mesh operation, i.e. add to zone 'freifunk' and enable olsr."))
 end
 
 function cbi_ip4addr(device)
@@ -37,6 +40,14 @@ function cbi_ip4addr(device)
        end
 end
 
+function cbi_ip6addr(device)
+       local ip6addr = n:taboption(device, Value, device .. "_ip6addr", translate("Mesh IPv6 address"),
+               translate("This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and has to be registered at your local community."))
+               ip6addr:depends(device .. "_config", 1)
+               ip6addr.datatype = "ip6addr"
+end
+
+
 function cbi_dhcp(device)
        local dhcp = n:taboption(device, Flag, device .. "_dhcp", translate("Enable DHCP"),
                translate("DHCP will automatically assign ip addresses to clients"))
@@ -44,6 +55,13 @@ function cbi_dhcp(device)
        dhcp.rmempty = true
 end
 
+function cbi_ra(device)
+       local ra = n:taboption(device, Flag, device .. "_ipv6ra", translate("Enable RA"),
+               translate("Send router advertisements on this device."))
+       ra:depends(device .. "_config", 1)
+       ra.rmempty = true
+end
+
 function cbi_dhcprange(device)
        local dhcprange = n:taboption(device, Value, device .. "_dhcprange", translate("DHCP IP range"),
                translate("The IP range from which clients are assigned ip addresses (e.g. 10.1.2.1/28). " ..
@@ -63,7 +81,7 @@ end)
 local wired_nets = {}
 uci:foreach("network", "interface", function(section)
        local device = section[".name"]
-       if not util.contains(nets, device) and device ~= "loopback" then
+       if not util.contains(nets, device) and device ~= "loopback" and not device:find("wireless") then
                table.insert(nets, device)
                table.insert(wired_nets, device)
        end
@@ -115,6 +133,14 @@ uci:foreach("wireless", "wifi-device", function(section)
        -- DHCP range
        cbi_dhcprange(device)
 
+       -- IPv6 addr and RA
+       if community_ipv6 == "1" then
+               if community_ipv6mode == "static" then
+                       cbi_ip6addr(device)
+               end
+               cbi_ra(device)
+       end
+
        -- Enable VAP
        if hwtype == "atheros" then
                local vap = n:taboption(device, Flag, device .. "_vap", translate("Virtual Access Point (VAP)"),
@@ -129,8 +155,16 @@ for _, device in pairs(wired_nets) do
        cbi_ip4addr(device)
        cbi_dhcp(device)
        cbi_dhcprange(device)
+       -- IPv6 addr and RA
+       if community_ipv6 == "1" then
+               if community_ipv6mode == "static" then
+                       cbi_ip6addr(device)
+               end
+               cbi_ra(device)
+       end
 end
 
+-- General settings
 g = m:section(TypedSection, "general", translate("General Settings"))
 g.anonymous = true
 
@@ -145,8 +179,13 @@ local share = g:option(Flag, "sharenet", translate("Share your internet connecti
        translate("Select this to allow others to use your connection to access the internet."))
        share.rmempty = true
 
---function m.on_after_commit (self)
---     sys.call("/usr/bin/mesh-wizard/wizard.sh >/dev/null")
---end
+-- IPv6 config
+if community_ipv6 == "1" then
+       v6 = m:section(NamedSection, "ipv6", nil, translate("IPv6 Settings"))
+       local enabled = v6:option(Flag, "enabled", translate("Enabled"),
+               translate("Activate or deactivate IPv6 config globally."))
+       enabled.default = meshkit_ipv6
+       enabled.rmempty = false
+end
 
 return m