X-Git-Url: http://git.archive.openwrt.org/?p=project%2Fluci.git;a=blobdiff_plain;f=applications%2Fluci-app-mwan3%2Fpo%2Fzh-cn%2Fmwan3.po;h=c838bdb563aec99de9ba8bd6ab27c5fd90bf8aee;hp=d1066c58508efacc86e36e4b6d1e41805d559125;hb=dc71ae0102485cc65efa1538d8715b1c1e66fca3;hpb=de2e92a1f4f80d1d4f3119efb2c4cb0d10f01b9a diff --git a/applications/luci-app-mwan3/po/zh-cn/mwan3.po b/applications/luci-app-mwan3/po/zh-cn/mwan3.po index d1066c585..c838bdb56 100644 --- a/applications/luci-app-mwan3/po/zh-cn/mwan3.po +++ b/applications/luci-app-mwan3/po/zh-cn/mwan3.po @@ -1,17 +1,15 @@ +# +# Yangfl , 2017. +# msgid "" msgstr "" "Content-Type: text/plain; charset=UTF-8\n" -"Project-Id-Version: \n" -"POT-Creation-Date: \n" -"PO-Revision-Date: \n" -"Language-Team: \n" -"Last-Translator: Hsing-Wang Liao \n" -"MIME-Version: 1.0\n" +"Last-Translator: Yangfl \n" +"Language-Team: \n" "Content-Transfer-Encoding: 8bit\n" -"X-Generator: Poedit 2.0\n" -"Last-Translator: \n" "Plural-Forms: nplurals=1; plural=0;\n" -"Language: zh_CN\n" +"PO-Revision-Date: 2017-10-28 16:58+0800\n" +"X-Generator: Gtranslator 2.91.7\n" msgid "%d hour" msgstr "%d 小时" @@ -32,31 +30,22 @@ msgid "" "Acceptable values: 1-100. This many Tracking IP addresses must respond for " "the link to be deemed up" msgstr "" -"接受的值: 1-100。这个设置项指定了当多少个IP地址能够连通时接口会被认为在线" +"取值范围：1-100。这个设置项指定了当多少个 IP 地址能够连通时接口会被认为在线" msgid "Acceptable values: 1-1000. Defaults to 1 if not set" -msgstr "接受的值: 1-100。如果不填写，默认值为 1" +msgstr "取值范围：1-1000。如果不填写，默认值为 1" -msgid "Advanced" -msgstr "高级" +msgid "Acceptable values: 1-256. Defaults to 1 if not set" +msgstr "取值范围：1-256。如果不填写，默认值为 1" msgid "Check IP rules" -msgstr "检查IP规则" +msgstr "检查 IP 规则" msgid "Check routing table" msgstr "检查路由表" -msgid "Configuration" -msgstr "配置" - -msgid "Currently Configured Interfaces" -msgstr "当前配置的接口" - -msgid "Currently Configured Members" -msgstr "当前配置的成员" - -msgid "Currently Configured Policies" -msgstr "当前配置的策略" +msgid "Collecting data..." +msgstr "正在收集数据..." msgid "Destination address" msgstr "目标地址" @@ -64,36 +53,45 @@ msgstr "目标地址" msgid "Destination port" msgstr "目标端口" -msgid "Detailed Status" -msgstr "详细状态" - -msgid "Diagnostic Results" -msgstr "诊断结果" +msgid "Detail" +msgstr "" msgid "Diagnostics" msgstr "诊断" +msgid "Disabled" +msgstr "已禁用" + msgid "" "Downed interface will be deemed up after this many successful ping tests" msgstr "当 Ping 成功次数达到这个数值后，已经被认为离线的接口将会重新上线" msgid "Enabled" -msgstr "启用" +msgstr "已启用" -msgid "Errors" -msgstr "错误" +msgid "Enter value in hex, starting with 0x" +msgstr "输入十六进制值，以 0x 开头" + +msgid "Execute" +msgstr "" + +msgid "Expect interface state on up event" +msgstr "在 up 事件发生时的预期接口状态" msgid "Failure interval" msgstr "故障检测间隔" +msgid "Firewall mask" +msgstr "防火墙掩码" + msgid "Flush conntrack table" msgstr "刷新连接跟踪表" msgid "Flush global firewall conntrack table on interface events" msgstr "在接口事件触发时刷新全局防火墙连接跟踪表" -msgid "Hotplug Script" -msgstr "Hotplug 脚本" +msgid "Globals" +msgstr "全局" msgid "Hotplug ifdown" msgstr "Hotplug ifdown" @@ -110,20 +108,20 @@ msgstr "IPv4" msgid "IPv6" msgstr "IPv6" +msgid "Initial state" +msgstr "初始状态" + msgid "Interface" msgstr "接口" -msgid "Interface Status" -msgstr "接口状态" - msgid "Interface down" msgstr "接口离线" msgid "Interface up" -msgstr "接口上线" +msgstr "接口在线" msgid "Interface will be deemed down after this many failed ping tests" -msgstr "当 Ping 失败次数达到这个数值后接口会被认为离线" +msgstr "当 Ping 失败次数达到这个数值后，接口会被认为离线" msgid "Interfaces" msgstr "接口" @@ -131,6 +129,12 @@ msgstr "接口" msgid "Internet Protocol" msgstr "互联网协议" +msgid "Keep failure interval" +msgstr "保持故障检测间隔" + +msgid "Keep ping failure interval during failure state" +msgstr "在故障状态期间保持的 Ping 故障检测间隔" + msgid "Last resort" msgstr "备用成员" @@ -140,47 +144,53 @@ msgstr "负载均衡" msgid "Loading" msgstr "载入中" -msgid "MWAN Config" -msgstr "MWAN 配置文件" +msgid "Local source interface" +msgstr "本地源接口" + +msgid "MWAN - Globals" +msgstr "" + +msgid "MWAN - Interfaces" +msgstr "" + +msgid "MWAN - Members" +msgstr "" + +msgid "MWAN - Notification" +msgstr "" -msgid "MWAN Detailed Status" -msgstr "MWAN 详细状态" +msgid "MWAN - Policies" +msgstr "" -msgid "MWAN Interface Configuration" -msgstr "MWAN 接口配置" +msgid "MWAN - Rules" +msgstr "" msgid "MWAN Interface Configuration - %s" msgstr "MWAN 接口配置 - %s" -msgid "MWAN Interface Diagnostics" -msgstr "MWAN 接口诊断" - msgid "MWAN Interface Live Status" msgstr "MWAN 接口实时状态" -msgid "MWAN Interface Systemlog" -msgstr "MWAN 接口系统日志" - -msgid "MWAN Member Configuration" -msgstr "MWAN 成员配置" - msgid "MWAN Member Configuration - %s" msgstr "MWAN 成员配置 - %s" -msgid "MWAN Policy Configuration" -msgstr "MWAN 策略配置" - msgid "MWAN Policy Configuration - %s" msgstr "MWAN 策略配置 - %s" -msgid "MWAN Rule Configuration" -msgstr "MWAN 规则配置" - msgid "MWAN Rule Configuration - %s" msgstr "MWAN 规则配置 - %s" -msgid "MWAN Service Control" -msgstr "MWAN 服务控制" +msgid "MWAN Status - Detail" +msgstr "" + +msgid "MWAN Status - Diagnostics" +msgstr "" + +msgid "MWAN Status - Troubleshooting" +msgstr "" + +msgid "MWAN status - Interface Live Status" +msgstr "" msgid "" "MWAN supports up to 250 physical and/or logical interfaces
MWAN " @@ -192,15 +202,19 @@ msgid "" msgstr "" "MWAN 支持最多 250 个物理或逻辑接口。
MWAN 要求所有接口必须在 /etc/" "config/network 中设定唯一的网关跃点。
名称必须与 /etc/config/network 中" -"的接口名称匹配。(可查看“高级”选项卡)
名称允许包括A-Z、a-z、0-9、_ 但是不" -"能有空格。
接口不应该与成员、策略、规则中的任意一个设置项使用相同的名称" +"的接口名称匹配。（可查看“高级”选项卡）
名称允许包括 A-Z、a-z、0-9、_ 但" +"是不能有空格。
接口不应该与成员、策略、规则中的任意一个设置项使用相同的" +"名称" msgid "" "May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or " "as a portrange (eg \"1024:2048\") without quotes" msgstr "" -"可以输入一个或多个端口 (例如 \"22\" 或者 \"80,443\") 或者是一个端口范围 (例" -"如 \"1024:2048\") 不含引号" +"可以输入一个或多个端口（例如“22”或者“80,443”）或者是一个端口范围（例" +"如“1024:2048”）不含引号" + +msgid "Member" +msgstr "成员" msgid "Member used" msgstr "使用的成员" @@ -213,7 +227,7 @@ msgid "" ">Names may contain characters A-Z, a-z, 0-9, _ and no spaces
Members " "may not share the same name as configured interfaces, policies or rules" msgstr "" -"“成员”用来设置每一个 MWAN 接口的跃点数 (即接口优先级) 和所占比重。
名称" +"“成员”用来设置每一个 MWAN 接口的跃点数（即接口优先级）和所占比重。
名称" "允许包括 A-Z、 a-、0-9、_ 但是不能有空格。
成员不应该与接口、策略、规则" "中的任意一个设置项使用相同的名称" @@ -227,17 +241,29 @@ msgid "" "Name of IPset rule. Requires IPset rule in /etc/dnsmasq.conf (eg \"ipset=/" "youtube.com/youtube\")" msgstr "" -"匹配 IPset 规则列表名称。需要先配置 /etc/dnsmasq.conf 中的 IPset 规则 (例如: " -"\"ipset=/youtube.com/youtube\")" - -msgid "Network Config" -msgstr "网络配置文件" +"匹配 IPset 规则列表名称。需要先配置 /etc/dnsmasq.conf 中的 IPset 规则（例" +"如：“ipset=/youtube.com/youtube”）" msgid "No" msgstr "否" -msgid "Overview" -msgstr "概况" +msgid "No MWAN interfaces found" +msgstr "没有找到 MWAN 接口" + +msgid "Notification" +msgstr "" + +msgid "Offline" +msgstr "离线" + +msgid "Online" +msgstr "在线" + +msgid "Online (tracking active)" +msgstr "在线（跟踪启用中）" + +msgid "Online (tracking off)" +msgstr "在线（跟踪已关闭）" msgid "Ping count" msgstr "Ping 计数" @@ -281,6 +307,9 @@ msgstr "" "包括A-Z、a-z、0-9、_ 但是不能有空格。名称应该在 15 个字符以内
策略不应该" "与接口、成员、规则中的任意一个设置项使用相同的名称" +msgid "Policy" +msgstr "策略" + msgid "Policy assigned" msgstr "分配的策略" @@ -290,38 +319,26 @@ msgstr "通信协议" msgid "Recovery interval" msgstr "故障恢复间隔" -msgid "Restart MWAN" -msgstr "重启 MWAN" - -msgid "Restore default hotplug script" -msgstr "恢复默认的 hotplug 脚本" - -msgid "Restore..." -msgstr "恢复..." +msgid "Rule" +msgstr "规则" msgid "Rules" msgstr "规则" msgid "" -"Rules specify which traffic will use a particular MWAN policy based on IP " -"address, port or protocol
Rules are matched from top to bottom. Rules " -"below a matching rule are ignored. Traffic not matching any rule is routed " -"using the main routing table
Traffic destined for known (other than " -"default) networks is handled by the main routing table. Traffic matching a " -"rule, but all WAN interfaces for that policy are down will be blackholed
Names may contain characters A-Z, a-z, 0-9, _ and no spaces
Rules may " -"not share the same name as configured interfaces, members or policies" -msgstr "" -"“规则”基于 IP 地址、协议、端口把流量划分到指定的“策略”中。
规则按照从上" -"到下的顺序进行匹配。除了第一条能够匹配一次通信的规则以外，其它规则将被忽略。" -"不匹配任何规则的通信将会由系统默认路由表进行。
来自已知的网络的转发流量" -"由系统默认路由表接手，然后 MWAN 从中匹配出相应的流量并转移到 MWAN 自己的路由" -"表。但是所有被划分到一个无法使用的策略的流量将会无法正常进行路由。
名称" -"允许包括A-Z、a-z、0-9、_ 但是不能有空格。
规则不应该与接口、成员、策略中" -"的任意一个设置项使用相同的名称" +"Rules specify which traffic will use a particular MWAN policy
Rules are " +"based on IP address, port or protocol
Rules are matched from top to " +"bottom
Rules below a matching rule are ignored
Traffic not " +"matching any rule is routed using the main routing table
Traffic " +"destined for known (other than default) networks is handled by the main " +"routing table
Traffic matching a rule, but all WAN interfaces for that " +"policy are down will be blackholed
Names may contain characters A-Z, a-" +"z, 0-9, _ and no spaces
Rules may not share the same name as configured " +"interfaces, members or policies" +msgstr "" msgid "Seconds. Acceptable values: 1-1000000. Defaults to 600 if not set" -msgstr "单位为秒。接受的值: 1-1000000。留空则使用默认值 600 秒" +msgstr "单位为秒。接受的值：1-1000000。留空则使用默认值 600 秒" msgid "Source address" msgstr "源地址" @@ -329,71 +346,61 @@ msgstr "源地址" msgid "Source port" msgstr "源端口" -msgid "Start MWAN" -msgstr "启动 MWAN" - msgid "Sticky" msgstr "粘滞模式" msgid "Sticky timeout" msgstr "粘滞超时" -msgid "Stop MWAN" -msgstr "停止 MWAN" - msgid "Supports CIDR notation (eg \"192.168.100.0/24\") without quotes" -msgstr "支持 CIDR 记法 (例如: \"192.168.100.0/24\") 不含引号" +msgstr "支持 CIDR 记法（例如：\"192.168.100.0/24\"）不含引号" -msgid "There are currently %d of 250 supported interfaces configured" +msgid "Task" msgstr "" -msgid "" -"This hostname or IP address will be pinged to determine if the link is up or " -"down. Leave blank to assume interface is always online" -msgstr "" +msgid "There are currently %d of 250 supported interfaces configured" +msgstr "当前已配置 %d 个接口，最大支持 250 个" msgid "" "This displays the metric assigned to this interface in /etc/config/network" msgstr "这里显示了这个接口在 /etc/config/network 中配置的跃点数" -msgid "This section allows you to modify the contents of /etc/config/mwan3" -msgstr "这里允许你修改 /etc/config/mwan3 的内容" - -msgid "This section allows you to modify the contents of /etc/config/network" -msgstr "这里允许你修改 /etc/config/network 的内容" - -msgid "This section allows you to modify the contents of /etc/config/wireless" -msgstr "这里允许你修改 /etc/config/wireless 的内容" +msgid "" +"This hostname or IP address will be pinged to determine if the link is up or " +"down. Leave blank to assume interface is always online" +msgstr "通过 ping 此主机或 IP 地址来确定链路是否在线。留空则认为接口始终在线" msgid "" -"This section allows you to modify the contents of /etc/hotplug.d/iface/16-" -"mwancustom
This is useful for running system commands and/or scripts " -"based on interface ifup or ifdown hotplug events

Notes:
The " -"first line of the script must be "#!/bin/sh" without quotes
Lines beginning with # are comments and are not executed

Available variables:
$ACTION is the hotplug event (ifup, ifdown)
" -"$INTERFACE is the interface name (wan1, wan2, etc.)
$DEVICE is the " -"device name attached to the interface (eth0.1, eth1, etc.)" -msgstr "" -"这里允许你修改/etc/hotplug.d/iface/16-mwancustom 的内容
这可以在接口 " -"ifup 或 ifdown Hotplug 事件时运行系统命令或脚本

注意:
脚本的" -"第一行必须是 "#!/bin/sh" 不含引号
以＃开头的行是注释，不会执行" -"

可用变量:
$ACTION 是 Hotplug 事件 (ifup, ifdown)
" -"$INTERFACE 是接口名称 (wan1、wan2 等)
$DEVICE 是连接到接口的设备名称 " -"(eth0.1、eth1 等)" +"This section allows you to modify the content of \"/etc/mwan3.user\".
The file is also preserved during sysupgrade.

Notes:
This " +"file is interpreted as a shell script.
The first line of the script " +"must be "#!/bin/sh" without quotes.
Lines beginning with # are " +"comments and are not executed.
Put your custom mwan3 action here, they " +"will
be executed with each netifd hotplug interface event
on " +"interfaces for which mwan3 is enabled.

There are three main " +"environment variables that are passed to this script.

$ACTION " +"Either \"ifup\" or \"ifdown\"
$INTERFACE Name of the interface which " +"went up or down (e.g. \"wan\" or \"wwan\")
$DEVICE Physical device name " +"which interface went up or down (e.g. \"eth0\" or \"wwan0\")

" +msgstr "" +"这里允许您修改“/etc/mwan3.user”的内容。
该文件在 sysupgrade 期间也会保" +"留。

注意：
该文件会作为 shell 脚本解释。
脚本的第一行必" +"须是"#!/bin/sh"，不带引号。
以#开头的行是注释，不会执行。
" +"将您的自定义 mwan3 动作放在这里，他们将
在启用 mwan3 的接口上
在 " +"netifd hotplug 接口事件时执行。

有三个主要的环境变量传递给这个脚" +"本。

$ACTION “ifup”或“ifdown”
$INTERFACE 启动或停止的接口名" +"（例如“wan”或“wwan”）
$DEVICE 启动或停止接口的物理设备名（例" +"如“eth0”或“wwan0”）

" msgid "Tracking hostname or IP address" -msgstr "" +msgstr "跟踪的主机或 IP 地址" -msgid "Tracking IP" -msgstr "跟踪的 IP" +msgid "Tracking method" +msgstr "跟踪方式" msgid "Tracking reliability" msgstr "跟踪可靠性" -msgid "Traffic Rules" -msgstr "流量规则" - msgid "" "Traffic from the same source IP address that previously matched this rule " "within the sticky timeout period will use the same WAN interface" @@ -404,76 +411,40 @@ msgstr "" msgid "Troubleshooting" msgstr "故障排除" -msgid "Troubleshooting Data" -msgstr "故障排除数据" - -msgid "View the contents of /etc/protocols for protocol descriptions" -msgstr "请查看 /etc/protocols 获取可选协议详情" - -msgid "WARNING: %d interfaces are configured exceeding the maximum of 250!" -msgstr "" - msgid "" -"WARNING: Some policies have names exceeding the maximum of 15 characters!" -msgstr "" +"Use the IP address of this interface as source IP address for traffic " +"initiated by the router itself" +msgstr "使用该接口的 IP 地址作为路由器本身发起的流量的源 IP 地址" -msgid "" -"WARNING: some interfaces are configured incorrectly or not at all in /etc/" -"config/network!" -msgstr "" - -msgid "" -"WARNING: some interfaces have a higher reliability requirement than there " -"are tracking IP addresses!" +msgid "View the content of /etc/protocols for protocol description" msgstr "" -msgid "" -"WARNING: some interfaces have duplicate metrics configured in /etc/config/" -"network!" -msgstr "" - -msgid "" -"WARNING: some interfaces have no default route in the main routing table!" -msgstr "" - -msgid "" -"WARNING: some interfaces have no metric configured in /etc/config/network!" -msgstr "" +msgid "WARNING: %d interfaces are configured exceeding the maximum of 250!" +msgstr "警告：已配置 %d 个接口，超过最大值 250！" -msgid "" -"WARNING: some rules have a port configured with no or improper protocol " -"specified! Please configure a specific protocol!" +msgid "WARNING: Interface %s are not found in /etc/config/network" msgstr "" -msgid "" -"WARNING: this and other interfaces have duplicate metrics configured in /etc/" -"config/network!" +msgid "WARNING: Interface %s has a duplicate metric %s configured" msgstr "" msgid "" -"WARNING: this interface has a higher reliability requirement than there are " -"tracking IP addresses!" -msgstr "" - -msgid "WARNING: this interface has no default route in the main routing table!" +"WARNING: Interface %s has a higher reliability requirement than tracking " +"hosts (%d)" msgstr "" -msgid "" -"WARNING: this interface has no metric configured in /etc/config/network!" +msgid "WARNING: Interface %s has no default route in the main routing table" msgstr "" -msgid "" -"WARNING: this interface is configured incorrectly or not at all in /etc/" -"config/network!" +msgid "WARNING: Policie %s has exceeding the maximum name of 15 characters" msgstr "" msgid "" -"WARNING: this policy's name is %d characters exceeding the maximum of 15!" +"WARNING: Rule %s have a port configured with no or improper protocol " +"specified!" msgstr "" -msgid "" -"WARNING: this rule is incorrectly configured with no or improper protocol " -"specified! Please configure a specific protocol!" +msgid "Waiting for command to complete..." msgstr "" msgid "Weight" @@ -483,9 +454,6 @@ msgid "" "When all policy members are offline use this behavior for matched traffic" msgstr "当所有策略成员都无法使用的时候，对使用该策略的流量使用这个操作" -msgid "Wireless Config" -msgstr "无线配置" - msgid "Yes" msgstr "是" @@ -493,10 +461,10 @@ msgid "always" msgstr "总是" msgid "blackhole (drop)" -msgstr "黑洞 (丢弃)" +msgstr "黑洞（丢弃）" msgid "default (use main routing table)" -msgstr "默认 (使用主路由表)" +msgstr "默认（使用主路由表）" msgid "ifdown" msgstr "ifdown" @@ -508,11 +476,245 @@ msgid "never" msgstr "从不" msgid "unreachable (reject)" -msgstr "不可达 (拒绝)" +msgstr "不可达（拒绝）" + +#~ msgid "Currently Configured Interfaces" +#~ msgstr "当前配置的接口" + +#~ msgid "Currently Configured Members" +#~ msgstr "当前配置的成员" + +#~ msgid "Currently Configured Policies" +#~ msgstr "当前配置的策略" + +#~ msgid "Detailed Status" +#~ msgstr "详细状态" + +#~ msgid "Diagnostic Results" +#~ msgstr "诊断结果" + +#~ msgid "Error collecting troubleshooting information" +#~ msgstr "收集故障排除信息时出错" + +#~ msgid "Errors" +#~ msgstr "错误" + +#~ msgid "Globals mwan3 options" +#~ msgstr "全局 mwan3 选项" + +#~ msgid "Interface Status" +#~ msgstr "接口状态" + +#~ msgid "Last 50 MWAN systemlog entries. Newest entries sorted at the top :" +#~ msgstr "最近 50 条 MWAN 系统日志，最新条目排在顶部：" + +#~ msgid "MWAN Detailed Status" +#~ msgstr "MWAN 详细状态" + +#~ msgid "MWAN Interface Configuration" +#~ msgstr "MWAN 接口配置" + +#~ msgid "MWAN Interface Diagnostics" +#~ msgstr "MWAN 接口诊断" + +#~ msgid "MWAN Interface Systemlog" +#~ msgstr "MWAN 接口系统日志" + +#~ msgid "MWAN Member Configuration" +#~ msgstr "MWAN 成员配置" + +#~ msgid "MWAN Policy Configuration" +#~ msgstr "MWAN 策略配置" + +#~ msgid "MWAN Rule Configuration" +#~ msgstr "MWAN 规则配置" + +#~ msgid "MWAN Service Control" +#~ msgstr "MWAN 服务控制" + +#~ msgid "No MWAN systemlog history found" +#~ msgstr "没有在系统日志中找到 MWAN 历史信息" + +#~ msgid "No detailed status information available" +#~ msgstr "没有状态详细信息可用" + +#~ msgid "No diagnostic results returned" +#~ msgstr "没有返回诊断结果" + +#~ msgid "No protocol specified" +#~ msgstr "未指定协议" + +#~ msgid "Restart MWAN" +#~ msgstr "重启 MWAN" + +#~ msgid "" +#~ "Rules specify which traffic will use a particular MWAN policy based on IP " +#~ "address, port or protocol
Rules are matched from top to bottom. " +#~ "Rules below a matching rule are ignored. Traffic not matching any rule is " +#~ "routed using the main routing table
Traffic destined for known " +#~ "(other than default) networks is handled by the main routing table. " +#~ "Traffic matching a rule, but all WAN interfaces for that policy are down " +#~ "will be blackholed
Names may contain characters A-Z, a-z, 0-9, _ and " +#~ "no spaces
Rules may not share the same name as configured " +#~ "interfaces, members or policies" +#~ msgstr "" +#~ "“规则”基于 IP 地址、协议、端口把流量划分到指定的“策略”中。
规则按照从" +#~ "上到下的顺序进行匹配。除了第一条能够匹配一次通信的规则以外，其它规则将被忽" +#~ "略。不匹配任何规则的通信将会由系统默认路由表进行。
来自已知的网络的转" +#~ "发流量由系统默认路由表接手，然后 MWAN 从中匹配出相应的流量并转移到 MWAN 自" +#~ "己的路由表。但是所有被划分到一个无法使用的策略的流量将会无法正常进行路由。" +#~ "
名称允许包括A-Z、a-z、0-9、_ 但是不能有空格。
规则不应该与接" +#~ "口、成员、策略中的任意一个设置项使用相同的名称" + +#~ msgid "Start MWAN" +#~ msgstr "启动 MWAN" + +#~ msgid "Stop MWAN" +#~ msgstr "停止 MWAN" + +#~ msgid "Tracking IP" +#~ msgstr "跟踪的 IP" + +#~ msgid "Traffic Rules" +#~ msgstr "流量规则" + +#~ msgid "Troubleshooting Data" +#~ msgstr "故障排除数据" + +#~ msgid "View the contents of /etc/protocols for protocol descriptions" +#~ msgstr "请查看 /etc/protocols 获取可选协议详情" + +#~ msgid "" +#~ "WARNING: Some interfaces are configured incorrectly or not at all in /etc/" +#~ "config/network!" +#~ msgstr "警告：某些接口配置不正确或未配置到 /etc/config/network！" + +#~ msgid "" +#~ "WARNING: Some interfaces have a higher reliability requirement than there " +#~ "are tracking IP addresses!" +#~ msgstr "警告：某些接口的跟踪可靠性要求大于了跟踪 IP 地址总数！" + +#~ msgid "" +#~ "WARNING: Some interfaces have duplicate metrics configured in /etc/config/" +#~ "network!" +#~ msgstr "警告：某些接口在 /etc/config/network 中配置了相同的跃点数！" + +#~ msgid "" +#~ "WARNING: Some interfaces have no default route in the main routing table!" +#~ msgstr "警告：某些接口在主路由表中没有默认路由！" + +#~ msgid "" +#~ "WARNING: Some interfaces have no metric configured in /etc/config/network!" +#~ msgstr "警告：某些接口没有在 /etc/config/network 中配置跃点数！" + +#~ msgid "" +#~ "WARNING: Some policies have names exceeding the maximum of 15 characters!" +#~ msgstr "警告：某些策略的名称超过了 15 个字符！" + +#~ msgid "" +#~ "WARNING: Some rules have a port configured with no or improper protocol " +#~ "specified! Please configure a specific protocol!" +#~ msgstr "" +#~ "警告：某些规则指定了端口却没有配置或配置了不正确的协议，请重新指定协议！" + +#~ msgid "" +#~ "WARNING: This and other interfaces have duplicate metrics configured in /" +#~ "etc/config/network!" +#~ msgstr "警告：此接口和其他接口在 /etc/config/network 中配置了相同的跃点数！" + +#~ msgid "" +#~ "WARNING: This interface has a higher reliability requirement than there " +#~ "are tracking IP addresses!" +#~ msgstr "警告：此接口的跟踪可靠性要求大于了跟踪 IP 地址总数！" + +#~ msgid "" +#~ "WARNING: This interface has no default route in the main routing table!" +#~ msgstr "警告：此接口在主路由表中没有默认路由！" + +#~ msgid "" +#~ "WARNING: This interface has no metric configured in /etc/config/network!" +#~ msgstr "警告：此接口没有在 /etc/config/network 中配置跃点数！" + +#~ msgid "" +#~ "WARNING: This interface is configured incorrectly or not at all in /etc/" +#~ "config/network!" +#~ msgstr "警告：此接口配置不正确或未配置到 /etc/config/network！" + +#~ msgid "" +#~ "WARNING: This policy's name is %d characters exceeding the maximum of 15!" +#~ msgstr "警告：此策略的名称具有 %d 个字符，超过了 15 个字符！" + +#~ msgid "" +#~ "WARNING: This rule is incorrectly configured with no or improper protocol " +#~ "specified! Please configure a specific protocol!" +#~ msgstr "警告：此规则没有配置或配置了不正确的协议，请重新指定协议！" + +#~ msgid "Waiting for MWAN to %s..." +#~ msgstr "等待 MWAN %s..." + +#~ msgid "Waiting for diagnostic results..." +#~ msgstr "等待诊断结果..." + +#~ msgid "restart" +#~ msgstr "重启" + +#~ msgid "start" +#~ msgstr "启动" + +#~ msgid "stop" +#~ msgstr "停止" + +#~ msgid "Advanced" +#~ msgstr "高级" + +#~ msgid "Configuration" +#~ msgstr "配置" + +#~ msgid "Hotplug Script" +#~ msgstr "Hotplug 脚本" + +#~ msgid "MWAN Config" +#~ msgstr "MWAN 配置文件" + +#~ msgid "Network Config" +#~ msgstr "网络配置文件" + +#~ msgid "Overview" +#~ msgstr "概况" + +#~ msgid "This section allows you to modify the contents of /etc/config/mwan3" +#~ msgstr "这里允许您修改 /etc/config/mwan3 的内容" + +#~ msgid "" +#~ "This section allows you to modify the contents of /etc/config/network" +#~ msgstr "这里允许您修改 /etc/config/network 的内容" + +#~ msgid "" +#~ "This section allows you to modify the contents of /etc/config/wireless" +#~ msgstr "这里允许您修改 /etc/config/wireless 的内容" + +#~ msgid "Wireless Config" +#~ msgstr "无线配置" + +#~ msgid "Restore default hotplug script" +#~ msgstr "恢复默认的 hotplug 脚本" + +#~ msgid "Restore..." +#~ msgstr "恢复..." #~ msgid "" -#~ "This IP address will be pinged to dermine if the link is up or down. " -#~ "Leave blank to assume interface is always online" +#~ "This section allows you to modify the contents of /etc/hotplug.d/iface/16-" +#~ "mwancustom
This is useful for running system commands and/or scripts " +#~ "based on interface ifup or ifdown hotplug events

Notes:
The first line of the script must be "#!/bin/sh" without " +#~ "quotes
Lines beginning with # are comments and are not executed

Available variables:
$ACTION is the hotplug event (ifup, " +#~ "ifdown)
$INTERFACE is the interface name (wan1, wan2, etc.)
" +#~ "$DEVICE is the device name attached to the interface (eth0.1, eth1, etc.)" #~ msgstr "" -#~ "MWAN 将会通过 Ping 这些 IP 地址来确定接口是否上线。如果留空，则 MWAN 认为" -#~ "该接口永远在线" +#~ "这里允许您修改 /etc/hotplug.d/iface/16-mwancustom 的内容
这可以在接" +#~ "口 ifup 或 ifdown Hotplug 事件时运行系统命令或脚本

注意:
" +#~ "脚本的第一行必须是 "#!/bin/sh" 不含引号
以＃开头的行是注释，" +#~ "不会执行

可用变量:
$ACTION 是 Hotplug 事件（ifup, ifdown）" +#~ "
$INTERFACE 是接口名称（wan1、wan2 等）
$DEVICE 是连接到接口的设" +#~ "备名称 （eth0.1、eth1 等）"