X-Git-Url: http://git.archive.openwrt.org/?p=project%2Fluci.git;a=blobdiff_plain;f=applications%2Fluci-app-mwan3%2Fpo%2Fzh-cn%2Fmwan3.po;h=b133e8b1d9ce437904aa205d3df3b153bdac9f9a;hp=b8948b3163cd7a225b34f8447a94636da8297d0d;hb=b86ed10f849c442cc57e531dd75e87e4499a1118;hpb=494fc4cdb913cfd68c7299bfc7dbad0dab8dfc0c diff --git a/applications/luci-app-mwan3/po/zh-cn/mwan3.po b/applications/luci-app-mwan3/po/zh-cn/mwan3.po index b8948b316..b133e8b1d 100644 --- a/applications/luci-app-mwan3/po/zh-cn/mwan3.po +++ b/applications/luci-app-mwan3/po/zh-cn/mwan3.po @@ -1,17 +1,7 @@ msgid "" msgstr "" "Content-Type: text/plain; charset=UTF-8\n" -"Project-Id-Version: \n" -"POT-Creation-Date: \n" -"PO-Revision-Date: \n" -"Language-Team: \n" "Last-Translator: Hsing-Wang Liao \n" -"MIME-Version: 1.0\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Generator: Poedit 2.0\n" -"Last-Translator: \n" -"Plural-Forms: nplurals=1; plural=0;\n" -"Language: zh_CN\n" msgid "%d hour" msgstr "%d 小时" @@ -32,20 +22,23 @@ msgid "" "Acceptable values: 1-100. This many Tracking IP addresses must respond for " "the link to be deemed up" msgstr "" -"接受的值: 1-100。这个设置项指定了当多少个IP地址能够连通时接口会被认为在线" +"取值范围: 1-100。这个设置项指定了当多少个 IP 地址能够连通时接口会被认为在线" msgid "Acceptable values: 1-1000. Defaults to 1 if not set" -msgstr "接受的值: 1-100。如果不填写，默认值为 1" +msgstr "取值范围: 1-100。如果不填写，默认值为 1" msgid "Advanced" msgstr "高级" msgid "Check IP rules" -msgstr "检查IP规则" +msgstr "检查 IP 规则" msgid "Check routing table" msgstr "检查路由表" +msgid "Collecting data..." +msgstr "正在收集数据..." + msgid "Configuration" msgstr "配置" @@ -73,6 +66,9 @@ msgstr "诊断结果" msgid "Diagnostics" msgstr "诊断" +msgid "Disabled" +msgstr "禁用" + msgid "" "Downed interface will be deemed up after this many successful ping tests" msgstr "当 Ping 成功次数达到这个数值后，已经被认为离线的接口将会重新上线" @@ -80,18 +76,36 @@ msgstr "当 Ping 成功次数达到这个数值后，已经被认为离线的接 msgid "Enabled" msgstr "启用" +msgid "Enter value in hex, starting with 0x" +msgstr "" + +msgid "Error collecting troubleshooting information" +msgstr "收集故障排除信息时出错" + msgid "Errors" msgstr "错误" +msgid "Expect interface state on up event" +msgstr "" + msgid "Failure interval" msgstr "故障检测间隔" +msgid "Firewall mask" +msgstr "" + msgid "Flush conntrack table" msgstr "刷新连接跟踪表" msgid "Flush global firewall conntrack table on interface events" msgstr "在接口事件触发时刷新全局防火墙连接跟踪表" +msgid "Globals" +msgstr "" + +msgid "Globals mwan3 options" +msgstr "" + msgid "Hotplug Script" msgstr "Hotplug 脚本" @@ -110,6 +124,9 @@ msgstr "IPv4" msgid "IPv6" msgstr "IPv6" +msgid "Initial state" +msgstr "" + msgid "Interface" msgstr "接口" @@ -131,6 +148,15 @@ msgstr "接口" msgid "Internet Protocol" msgstr "互联网协议" +msgid "Keep failure interval" +msgstr "" + +msgid "Keep ping failure interval during failure state" +msgstr "" + +msgid "Last 50 MWAN systemlog entries. Newest entries sorted at the top :" +msgstr "最近 50 条 MWAN 系统日志，最新条目排在顶部:" + msgid "Last resort" msgstr "备用成员" @@ -140,6 +166,9 @@ msgstr "负载均衡" msgid "Loading" msgstr "载入中" +msgid "Local source interface" +msgstr "" + msgid "MWAN Config" msgstr "MWAN 配置文件" @@ -192,15 +221,19 @@ msgid "" msgstr "" "MWAN 支持最多 250 个物理或逻辑接口。
MWAN 要求所有接口必须在 /etc/" "config/network 中设定唯一的网关跃点。
名称必须与 /etc/config/network 中" -"的接口名称匹配。(可查看“高级”选项卡)
名称允许包括A-Z、a-z、0-9、_ 但是不" -"能有空格。
接口不应该与成员、策略、规则中的任意一个设置项使用相同的名称" +"的接口名称匹配。（可查看“高级”选项卡）
名称允许包括A-Z、a-z、0-9、_ 但是" +"不能有空格。
接口不应该与成员、策略、规则中的任意一个设置项使用相同的名" +"称" msgid "" "May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or " "as a portrange (eg \"1024:2048\") without quotes" msgstr "" -"可以输入一个或多个端口 (例如 \"22\" 或者 \"80,443\") 或者是一个端口范围 (例" -"如 \"1024:2048\") 不含引号" +"可以输入一个或多个端口（例如 \"22\" 或者 \"80,443\"）或者是一个端口范围（例" +"如 \"1024:2048\"）不含引号" + +msgid "Member" +msgstr "成员" msgid "Member used" msgstr "使用的成员" @@ -213,7 +246,7 @@ msgid "" ">Names may contain characters A-Z, a-z, 0-9, _ and no spaces
Members " "may not share the same name as configured interfaces, policies or rules" msgstr "" -"“成员”用来设置每一个 MWAN 接口的跃点数 (即接口优先级) 和所占比重。
名称" +"“成员”用来设置每一个 MWAN 接口的跃点数（即接口优先级）和所占比重。
名称" "允许包括 A-Z、 a-、0-9、_ 但是不能有空格。
成员不应该与接口、策略、规则" "中的任意一个设置项使用相同的名称" @@ -236,6 +269,33 @@ msgstr "网络配置文件" msgid "No" msgstr "否" +msgid "No MWAN interfaces found" +msgstr "没有找到 MWAN 接口" + +msgid "No MWAN systemlog history found" +msgstr "没有在系统日志中找到 MWAN 历史信息" + +msgid "No detailed status information available" +msgstr "没有状态详细信息可用" + +msgid "No diagnostic results returned" +msgstr "没有返回诊断结果" + +msgid "No protocol specified" +msgstr "未指定协议" + +msgid "Offline" +msgstr "离线" + +msgid "Online" +msgstr "" + +msgid "Online (tracking active)" +msgstr "在线（追踪启用中）" + +msgid "Online (tracking off)" +msgstr "在线（追踪已关闭）" + msgid "Overview" msgstr "概况" @@ -281,6 +341,9 @@ msgstr "" "包括A-Z、a-z、0-9、_ 但是不能有空格。名称应该在 15 个字符以内
策略不应该" "与接口、成员、规则中的任意一个设置项使用相同的名称" +msgid "Policy" +msgstr "策略" + msgid "Policy assigned" msgstr "分配的策略" @@ -293,11 +356,8 @@ msgstr "故障恢复间隔" msgid "Restart MWAN" msgstr "重启 MWAN" -msgid "Restore default hotplug script" -msgstr "恢复默认的 hotplug 脚本" - -msgid "Restore..." -msgstr "恢复..." +msgid "Rule" +msgstr "规则" msgid "Rules" msgstr "规则" @@ -342,22 +402,34 @@ msgid "Stop MWAN" msgstr "停止 MWAN" msgid "Supports CIDR notation (eg \"192.168.100.0/24\") without quotes" -msgstr "支持 CIDR 记法 (例如: \"192.168.100.0/24\") 不含引号" +msgstr "支持 CIDR 记法（例如: \"192.168.100.0/24\"）不含引号" msgid "There are currently %d of 250 supported interfaces configured" -msgstr "" - -msgid "" -"This IP address will be pinged to dermine if the link is up or down. Leave " -"blank to assume interface is always online" -msgstr "" -"MWAN 将会通过 Ping 这些 IP 地址来确定接口是否上线。如果留空，则 MWAN 认为该接" -"口永远在线" +msgstr "当前已配置 %d 个接口，最大支持 250 个" msgid "" "This displays the metric assigned to this interface in /etc/config/network" msgstr "这里显示了这个接口在 /etc/config/network 中配置的跃点数" +msgid "" +"This hostname or IP address will be pinged to determine if the link is up or " +"down. Leave blank to assume interface is always online" +msgstr "通过 ping 此主机或 IP 地址来确定链路是否在线。留空则认为接口始终在线" + +msgid "" +"This section allows you to modify the content of \"/etc/mwan3.user\".
The file is also preserved during sysupgrade.

Notes:
This " +"file is interpreted as a shell script.
The first line of the script " +"must be "#!/bin/sh" without quotes.
Lines beginning with # are " +"comments and are not executed.
Put your custom mwan3 action here, they " +"will
be executed with each netifd hotplug interface event
on " +"interfaces for which mwan3 is enabled.

There are three main " +"environment variables that are passed to this script.

$ACTION " +"Either \"ifup\" or \"ifdown\"
$INTERFACE Name of the interface which " +"went up or down (e.g. \"wan\" or \"wwan\")
$DEVICE Physical device name " +"which interface went up or down (e.g. \"eth0\" or \"wwan0\")

" +msgstr "" + msgid "This section allows you to modify the contents of /etc/config/mwan3" msgstr "这里允许你修改 /etc/config/mwan3 的内容" @@ -367,28 +439,17 @@ msgstr "这里允许你修改 /etc/config/network 的内容" msgid "This section allows you to modify the contents of /etc/config/wireless" msgstr "这里允许你修改 /etc/config/wireless 的内容" -msgid "" -"This section allows you to modify the contents of /etc/hotplug.d/iface/16-" -"mwancustom
This is useful for running system commands and/or scripts " -"based on interface ifup or ifdown hotplug events

Notes:
The " -"first line of the script must be "#!/bin/sh" without quotes
Lines beginning with # are comments and are not executed

Available variables:
$ACTION is the hotplug event (ifup, ifdown)
" -"$INTERFACE is the interface name (wan1, wan2, etc.)
$DEVICE is the " -"device name attached to the interface (eth0.1, eth1, etc.)" -msgstr "" -"这里允许你修改/etc/hotplug.d/iface/16-mwancustom 的内容
这可以在接口 " -"ifup 或 ifdown Hotplug 事件时运行系统命令或脚本

注意:
脚本的" -"第一行必须是 "#!/bin/sh" 不含引号
以＃开头的行是注释，不会执行" -"

可用变量:
$ACTION 是 Hotplug 事件 (ifup, ifdown)
" -"$INTERFACE 是接口名称 (wan1、wan2 等)
$DEVICE 是连接到接口的设备名称 " -"(eth0.1、eth1 等)" - msgid "Tracking IP" -msgstr "跟踪的 IP" +msgstr "追踪的 IP" + +msgid "Tracking hostname or IP address" +msgstr "追踪的主机或 IP 地址" + +msgid "Tracking method" +msgstr "" msgid "Tracking reliability" -msgstr "跟踪可靠性" +msgstr "追踪可靠性" msgid "Traffic Rules" msgstr "流量规则" @@ -406,74 +467,86 @@ msgstr "故障排除" msgid "Troubleshooting Data" msgstr "故障排除数据" +msgid "" +"Use the IP address of this interface as source IP address for traffic " +"initiated by the router itself" +msgstr "" + msgid "View the contents of /etc/protocols for protocol descriptions" msgstr "请查看 /etc/protocols 获取可选协议详情" msgid "WARNING: %d interfaces are configured exceeding the maximum of 250!" -msgstr "" +msgstr "警告: 已配置 %d 个接口，超过最大值 250！" msgid "" "WARNING: Some policies have names exceeding the maximum of 15 characters!" -msgstr "" +msgstr "警告: 某些策略的名称超过了 15 个字符！" msgid "" "WARNING: some interfaces are configured incorrectly or not at all in /etc/" "config/network!" -msgstr "" +msgstr "警告: 某些接口配置不正确或未配置到 /etc/config/network！" msgid "" "WARNING: some interfaces have a higher reliability requirement than there " "are tracking IP addresses!" -msgstr "" +msgstr "警告: 某些接口的追踪可靠性要求大于了追踪 IP 地址总数！" msgid "" "WARNING: some interfaces have duplicate metrics configured in /etc/config/" "network!" -msgstr "" +msgstr "警告: 某些接口在 /etc/config/network 中配置了相同的跃点数！" msgid "" "WARNING: some interfaces have no default route in the main routing table!" -msgstr "" +msgstr "警告: 某些接口在主路由表中没有默认路由！" msgid "" "WARNING: some interfaces have no metric configured in /etc/config/network!" -msgstr "" +msgstr "警告: 某些接口没有在 /etc/config/network 中配置跃点数！" msgid "" "WARNING: some rules have a port configured with no or improper protocol " "specified! Please configure a specific protocol!" msgstr "" +"警告: 某些规则指定了端口却没有配置或配置了不正确的协议，请重新指定协议！" msgid "" "WARNING: this and other interfaces have duplicate metrics configured in /etc/" "config/network!" -msgstr "" +msgstr "警告: 此接口和其他接口在 /etc/config/network 中配置了相同的跃点数！" msgid "" "WARNING: this interface has a higher reliability requirement than there are " "tracking IP addresses!" -msgstr "" +msgstr "警告: 此接口的追踪可靠性要求大于了追踪 IP 地址总数！" msgid "WARNING: this interface has no default route in the main routing table!" -msgstr "" +msgstr "警告: 此接口在主路由表中没有默认路由！" msgid "" "WARNING: this interface has no metric configured in /etc/config/network!" -msgstr "" +msgstr "警告: 此接口没有在 /etc/config/network 中配置跃点数！" msgid "" "WARNING: this interface is configured incorrectly or not at all in /etc/" "config/network!" -msgstr "" +msgstr "警告: 此接口配置不正确或未配置到 /etc/config/network！" msgid "" "WARNING: this policy's name is %d characters exceeding the maximum of 15!" -msgstr "" +msgstr "警告: 此策略的名称具有 %d 个字符，超过了 15 个字符！" msgid "" "WARNING: this rule is incorrectly configured with no or improper protocol " "specified! Please configure a specific protocol!" -msgstr "" +msgstr "警告: 此规则没有配置或配置了不正确的协议，请重新指定协议！" + +msgid "Waiting for MWAN to %s..." +msgstr "等待 MWAN %s..." + +msgid "Waiting for diagnostic results..." +msgstr "等待诊断结果..." msgid "Weight" msgstr "比重" @@ -492,10 +565,10 @@ msgid "always" msgstr "总是" msgid "blackhole (drop)" -msgstr "黑洞 (丢弃)" +msgstr "黑洞（丢弃）" msgid "default (use main routing table)" -msgstr "默认 (使用主路由表)" +msgstr "默认（使用主路由表）" msgid "ifdown" msgstr "ifdown" @@ -506,5 +579,37 @@ msgstr "ifup" msgid "never" msgstr "从不" +msgid "restart" +msgstr "" + +msgid "start" +msgstr "" + +msgid "stop" +msgstr "" + msgid "unreachable (reject)" -msgstr "不可达 (拒绝)" +msgstr "不可达（拒绝）" + +#~ msgid "Restore default hotplug script" +#~ msgstr "恢复默认的 hotplug 脚本" + +#~ msgid "Restore..." +#~ msgstr "恢复..." + +#~ msgid "" +#~ "This section allows you to modify the contents of /etc/hotplug.d/iface/16-" +#~ "mwancustom
This is useful for running system commands and/or scripts " +#~ "based on interface ifup or ifdown hotplug events

Notes:
The first line of the script must be "#!/bin/sh" without " +#~ "quotes
Lines beginning with # are comments and are not executed

Available variables:
$ACTION is the hotplug event (ifup, " +#~ "ifdown)
$INTERFACE is the interface name (wan1, wan2, etc.)
" +#~ "$DEVICE is the device name attached to the interface (eth0.1, eth1, etc.)" +#~ msgstr "" +#~ "这里允许你修改 /etc/hotplug.d/iface/16-mwancustom 的内容
这可以在接" +#~ "口 ifup 或 ifdown Hotplug 事件时运行系统命令或脚本

注意:
" +#~ "脚本的第一行必须是 "#!/bin/sh" 不含引号
以＃开头的行是注释，" +#~ "不会执行

可用变量:
$ACTION 是 Hotplug 事件（ifup, ifdown）" +#~ "
$INTERFACE 是接口名称（wan1、wan2 等）
$DEVICE 是连接到接口的设" +#~ "备名称 （eth0.1、eth1 等）"