po: resync translations

[project/luci.git] / po / en / coovachilli.po

diff --git a/po/en/coovachilli.po b/po/en/coovachilli.po
index f0ac5c1..ebaa345 100644 (file)
--- a/po/en/coovachilli.po
+++ b/po/en/coovachilli.po
@@ -6,10 +6,10 @@ msgstr ""
 "PO-Revision-Date: 2012-03-18 05:30+0200\n"
 "Last-Translator: Anonymous Pootle User\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"Language: en\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Pootle 2.0.4\n"
 
@@ -46,9 +46,9 @@ msgstr ""
 #~ "This has the same effect as sending the HUP signal. If interval is 0 "
 #~ "(zero) this feature is disabled. "
 #~ msgstr ""
-#~ "Re-read configuration file and do DNS lookups every interval seconds. This "
-#~ "has the same effect as sending the HUP signal. If interval is 0 (zero) this "
-#~ "feature is disabled. "
+#~ "Re-read configuration file and do DNS lookups every interval seconds. "
+#~ "This has the same effect as sending the HUP signal. If interval is 0 "
+#~ "(zero) this feature is disabled. "
 
 #~ msgid "Pid file"
 #~ msgstr "Pid file"
@@ -115,7 +115,8 @@ msgstr ""
 
 #~ msgid ""
 #~ "Script executed after the TUN/TAP network interface has been brought up"
-#~ msgstr "Script executed after the TUN/TAP network interface has been brought up"
+#~ msgstr ""
+#~ "Script executed after the TUN/TAP network interface has been brought up"
 
 #~ msgid "Uplink subnet"
 #~ msgstr "Uplink subnet"
@@ -172,8 +173,8 @@ msgstr ""
 #~ "MAC address to listen to. If not specified the MAC address of the "
 #~ "interface will be used"
 #~ msgstr ""
-#~ "MAC address to listen to. If not specified the MAC address of the interface "
-#~ "will be used"
+#~ "MAC address to listen to. If not specified the MAC address of the "
+#~ "interface will be used"
 
 #~ msgid "DHCP start number"
 #~ msgstr "DHCP start number"
@@ -210,8 +211,8 @@ msgstr ""
 #~ "Password to use for Administrative-User authentication in order to pick "
 #~ "up chilli configurations and establish a device \"system\" session"
 #~ msgstr ""
-#~ "Password to use for Administrative-User authentication in order to pick up "
-#~ "chilli configurations and establish a device \"system\" session"
+#~ "Password to use for Administrative-User authentication in order to pick "
+#~ "up chilli configurations and establish a device \"system\" session"
 
 #~ msgid "Admin user"
 #~ msgstr "Admin user"
@@ -220,8 +221,8 @@ msgstr ""
 #~ "User-name to use for Administrative-User authentication in order to pick "
 #~ "up chilli configurations and establish a device \"system\" session"
 #~ msgstr ""
-#~ "User-name to use for Administrative-User authentication in order to pick up "
-#~ "chilli configurations and establish a device \"system\" session"
+#~ "User-name to use for Administrative-User authentication in order to pick "
+#~ "up chilli configurations and establish a device \"system\" session"
 
 #~ msgid "Do not check disconnection requests"
 #~ msgstr "Do not check disconnection requests"
@@ -254,8 +255,8 @@ msgstr ""
 #~ "Allows OpenID authentication by sending ChilliSpot-Config=allow-"
 #~ "openidauth in RADIUS Access-Requests"
 #~ msgstr ""
-#~ "Allows OpenID authentication by sending ChilliSpot-Config=allow-openidauth "
-#~ "in RADIUS Access-Requests"
+#~ "Allows OpenID authentication by sending ChilliSpot-Config=allow-"
+#~ "openidauth in RADIUS Access-Requests"
 
 #~ msgid "RADIUS accounting port"
 #~ msgstr "RADIUS accounting port"
@@ -272,7 +273,8 @@ msgstr ""
 #~ "The UDP port number to use for radius authentication requests (default "
 #~ "1812)"
 #~ msgstr ""
-#~ "The UDP port number to use for radius authentication requests (default 1812)"
+#~ "The UDP port number to use for radius authentication requests (default "
+#~ "1812)"
 
 #~ msgid "Option radiuscalled"
 #~ msgstr "Option radiuscalled"
@@ -309,7 +311,8 @@ msgstr ""
 
 #~ msgid ""
 #~ "Value of NAS-Port-Type attribute. Defaults to 19 (Wireless-IEEE-802.11)"
-#~ msgstr "Value of NAS-Port-Type attribute. Defaults to 19 (Wireless-IEEE-802.11)"
+#~ msgstr ""
+#~ "Value of NAS-Port-Type attribute. Defaults to 19 (Wireless-IEEE-802.11)"
 
 #~ msgid "Send RADIUS VSA"
 #~ msgstr "Send RADIUS VSA"
@@ -342,8 +345,8 @@ msgstr ""
 #~ "Swap the meaning of \"input octets\" and \"output octets\" as it related "
 #~ "to RADIUS attribtues"
 #~ msgstr ""
-#~ "Swap the meaning of \"input octets\" and \"output octets\" as it related to "
-#~ "RADIUS attribtues"
+#~ "Swap the meaning of \"input octets\" and \"output octets\" as it related "
+#~ "to RADIUS attribtues"
 
 #~ msgid "Allow WPA guests"
 #~ msgstr "Allow WPA guests"
@@ -416,7 +419,8 @@ msgstr ""
 
 #~ msgid ""
 #~ "Default session timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr "Default session timeout unless otherwise set by RADIUS (defaults to 0)"
+#~ msgstr ""
+#~ "Default session timeout unless otherwise set by RADIUS (defaults to 0)"
 
 #~ msgid "Inspect DNS traffic"
 #~ msgstr "Inspect DNS traffic"
@@ -451,7 +455,8 @@ msgstr ""
 #~ "Do not return to UAM server on login success, just redirect to original "
 #~ "URL"
 #~ msgstr ""
-#~ "Do not return to UAM server on login success, just redirect to original URL"
+#~ "Do not return to UAM server on login success, just redirect to original "
+#~ "URL"
 
 #~ msgid "Do not do WISPr"
 #~ msgstr "Do not do WISPr"
@@ -481,7 +486,8 @@ msgstr ""
 #~ msgstr "Allowed resources"
 
 #~ msgid "List of resources the client can access without first authenticating"
-#~ msgstr "List of resources the client can access without first authenticating"
+#~ msgstr ""
+#~ "List of resources the client can access without first authenticating"
 
 #~ msgid "Allow any DNS server"
 #~ msgstr "Allow any DNS server"
@@ -532,8 +538,8 @@ msgstr ""
 #~ "Use this IP address to instantly logout a client accessing it (defaults "
 #~ "to 1.1.1.1)"
 #~ msgstr ""
-#~ "Use this IP address to instantly logout a client accessing it (defaults to "
-#~ "1.1.1.1)"
+#~ "Use this IP address to instantly logout a client accessing it (defaults "
+#~ "to 1.1.1.1)"
 
 #~ msgid "UAM listening port"
 #~ msgstr "UAM listening port"
@@ -560,14 +566,16 @@ msgstr ""
 #~ "An init.d style program to handle local content on the uamuiport web "
 #~ "server"
 #~ msgstr ""
-#~ "An init.d style program to handle local content on the uamuiport web server"
+#~ "An init.d style program to handle local content on the uamuiport web "
+#~ "server"
 
 #~ msgid "Use status file"
 #~ msgstr "Use status file"
 
 #~ msgid ""
 #~ "Write the status of clients in a non-volatile state file (experimental)"
-#~ msgstr "Write the status of clients in a non-volatile state file (experimental)"
+#~ msgstr ""
+#~ "Write the status of clients in a non-volatile state file (experimental)"
 
 #~ msgid "WISPr login url"
 #~ msgstr "WISPr login url"
@@ -601,7 +609,8 @@ msgstr ""
 #~ msgstr "Allowed MAC addresses"
 
 #~ msgid "List of MAC addresses for which MAC authentication will be performed"
-#~ msgstr "List of MAC addresses for which MAC authentication will be performed"
+#~ msgstr ""
+#~ "List of MAC addresses for which MAC authentication will be performed"
 
 #~ msgid "Authenticate locally allowed MACs"
 #~ msgstr "Authenticate locally allowed MACs"