luci-mod-admin-full: allow a wider range of DSL SNR margins

[project/luci.git] / modules / luci-mod-admin-full / luasrc / model / cbi / admin_network / network.lua

diff --git a/modules/luci-mod-admin-full/luasrc/model/cbi/admin_network/network.lua b/modules/luci-mod-admin-full/luasrc/model/cbi/admin_network/network.lua
index 535e4a1..1cbd181 100644 (file)
--- a/modules/luci-mod-admin-full/luasrc/model/cbi/admin_network/network.lua
+++ b/modules/luci-mod-admin-full/luasrc/model/cbi/admin_network/network.lua
@@ -1,13 +1,72 @@
 -- Copyright 2008 Steven Barth <steven@midlink.org>
--- Copyright 2008 Jo-Philipp Wich <xm@leipzig.freifunk.net>
+-- Copyright 2008 Jo-Philipp Wich <jow@openwrt.org>
 -- Licensed to the public under the Apache License 2.0.
 
 local fs = require "nixio.fs"
+local json = require "luci.jsonc"
 
 m = Map("network", translate("Interfaces"))
 m.pageaction = false
 m:section(SimpleSection).template = "admin_network/iface_overview"
 
+if fs.access("/etc/init.d/dsl_control") then
+       local ok, boarddata = pcall(json.parse, fs.readfile("/etc/board.json"))
+       local modemtype = (ok == true)
+               and (type(boarddata) == "table")
+               and (type(boarddata.dsl) == "table")
+               and (type(boarddata.dsl.modem) == "table")
+               and boarddata.dsl.modem.type
+
+       dsl = m:section(TypedSection, "dsl", translate("DSL"))
+       dsl.anonymous = true
+
+       annex = dsl:option(ListValue, "annex", translate("Annex"))
+       annex:value("a", translate("Annex A + L + M (all)"))
+       annex:value("b", translate("Annex B (all)"))
+       annex:value("j", translate("Annex J (all)"))
+       annex:value("m", translate("Annex M (all)"))
+       annex:value("bdmt", translate("Annex B G.992.1"))
+       annex:value("b2", translate("Annex B G.992.3"))
+       annex:value("b2p", translate("Annex B G.992.5"))
+       annex:value("at1", translate("ANSI T1.413"))
+       annex:value("admt", translate("Annex A G.992.1"))
+       annex:value("alite", translate("Annex A G.992.2"))
+       annex:value("a2", translate("Annex A G.992.3"))
+       annex:value("a2p", translate("Annex A G.992.5"))
+       annex:value("l", translate("Annex L G.992.3 POTS 1"))
+       annex:value("m2", translate("Annex M G.992.3"))
+       annex:value("m2p", translate("Annex M G.992.5"))
+
+       tone = dsl:option(ListValue, "tone", translate("Tone"))
+       tone:value("", translate("auto"))
+       tone:value("a", translate("A43C + J43 + A43"))
+       tone:value("av", translate("A43C + J43 + A43 + V43"))
+       tone:value("b", translate("B43 + B43C"))
+       tone:value("bv", translate("B43 + B43C + V43"))
+
+       if modemtype == "vdsl" then
+               xfer_mode = dsl:option(ListValue, "xfer_mode", translate("Encapsulation mode"))
+               xfer_mode:value("", translate("auto"))
+               xfer_mode:value("atm", translate("ATM (Asynchronous Transfer Mode)"))
+               xfer_mode:value("ptm", translate("PTM/EFM (Packet Transfer Mode)"))
+
+               line_mode = dsl:option(ListValue, "line_mode", translate("DSL line mode"))
+               line_mode:value("", translate("auto"))
+               line_mode:value("adsl", translate("ADSL"))
+               line_mode:value("vdsl", translate("VDSL"))
+
+               ds_snr = dsl:option(ListValue, "ds_snr_offset", translate("Downstream SNR offset"))
+               ds_snr:depends("line_mode", "adsl")
+               for i = -100, 100, 5 do
+                       ds_snr:value(i, translatef("%.1f dB", i / 10))
+               end
+       end
+
+       firmware = dsl:option(Value, "firmware", translate("Firmware File"))
+
+       m.pageaction = true
+end
+
 -- Show ATM bridge section if we have the capabilities
 if fs.access("/usr/sbin/br2684ctl") then
        atm = m:section(TypedSection, "atm-bridge", translate("ATM Bridges"),