"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Pootle 2.0.6\n"
+msgid "%s is untagged in multiple VLANs!"
+msgstr ""
+
msgid "(%d minute window, %d second interval)"
msgstr "(%d 分鐘訊息, %d 秒更新)"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr "允許127.0.0.0/8範圍內的上游回應，例如：RBL服務"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "取消選取將會另外建立一個新網路，而不會覆蓋目前的網路設定"
+msgid "An additional network will be created if you leave this checked."
+msgstr ""
msgid "Annex"
msgstr ""
"下面是待備份的檔案清單。包含了更改的設定檔案、必要的基本檔案和使用者自訂的備"
"份檔案"
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "傳輸速率"
msgid "CA certificate; if empty it will be saved after the first connection."
msgstr ""
-msgid "CPU"
-msgstr "CPU"
-
msgid "CPU usage (%)"
msgstr "CPU 使用率 (%)"
msgid "Domain whitelist"
msgstr "網域白名單"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "啟用掛載點"
msgid "Encryption"
msgstr "加密"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "刪除中..."
msgid "External system log server port"
msgstr "外部系統日誌伺服器埠號"
+msgid "External system log server protocol"
+msgstr ""
+
msgid "Extra SSH command options"
msgstr ""
msgid "Free space"
msgstr "剩餘空間"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "多執行緒"
msgid "IPv4-Address"
msgstr "IPv4-位址"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6版"
msgid "Join Network"
msgstr "加入網路"
-msgid "Join Network: Settings"
-msgstr "加入網路的設定"
-
msgid "Join Network: Wireless Scan"
msgstr "加入網路:無線網路掃描"
+msgid "Joining Network: %q"
+msgstr ""
+
msgid "Keep settings"
msgstr "保持設定值"
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr "只許在給予的介面上聆聽, 如果未指定, 全都允許"
msgid "MB/s"
msgstr "MB/s"
+msgid "MD5"
+msgstr ""
+
msgid "MHz"
msgstr "MHz"
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. Adds in an additional layer of symmetric-key cryptography for post-"
+"quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "選項"
msgid "Override MTU"
msgstr "覆蓋MTU數值"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "執行重置"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "傳輸率:"
msgid "Port"
msgstr "埠"
-msgid "Port %d"
-msgstr "埠 %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "埠 %d 尚未標記在多個VLANs中!"
-
msgid "Port status:"
msgstr "埠狀態:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgstr "假若在給于多次的 LCP 呼叫失敗後終點將死, 使用0忽略失敗"
-msgid "Prevent listening on thise interfaces."
+msgid "Prevent listening on these interfaces."
msgstr ""
msgid "Prevents client-to-client communication"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Prism2/2.5/3 802.11b 無線控制器"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "前進"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "偽裝Ad-Hoc (ahdemo模式)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
msgid "Remote IPv4 address"
msgstr "遠端IPv4位址"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "移除"
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "對特定的ISP需要,例如.DOCSIS 3 加速有線電視寬頻網路"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid "Required. Public key of peer."
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Run filesystem check"
msgstr "執行系統檢查"
+msgid "SHA256"
+msgstr ""
+
msgid ""
"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
"use 6in4 instead"
msgid "Software"
msgstr "軟體"
+msgid "Software VLAN"
+msgstr ""
+
msgid "Some fields are invalid, cannot save values!"
msgstr "有些欄位失效, 無法儲存數值!"
msgid "Sorry, the server encountered an unexpected error."
msgstr "抱歉, 伺服器遭遇非預期的錯誤."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
-"抱歉, 沒有sysupgrade支援出現, 新版韌體映像檔必須手動更新. 請回歸OpenWrt wiki"
-"找尋特定設備安裝指引."
+"抱歉, 沒有sysupgrade支援出現, 新版韌體映像檔必須手動更新. 請回歸"
+"wiki找尋特定設備安裝指引."
msgid "Sort"
msgstr "分類"
"dead"
msgstr "指定可請求的最大秒數直到駭客主機死亡為止"
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "指定加密金鑰在此."
msgid "Switch %q (%s)"
msgstr "交換器 %q (%s)"
+msgid ""
+"Switch %q has an unknown topology - the VLAN settings might not be accurate."
+msgstr ""
+
+msgid "Switch VLAN"
+msgstr ""
+
msgid "Switch protocol"
msgstr "交換器協定"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr "指定到這供應商的IPv6字首, 通常用 <code>::</code>結尾"
msgid "The length of the IPv6 prefix in bits"
msgstr "這IPv6開頭以位元計的長度"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
-"上傳一個sysupgrade-相容的映像檔在這以便替代正執行中的韌體. 勾選\"保持設定\"以"
-"保留目前設定值(必須要是OpenWrt相容性韌體映像檔)."
+"上傳一個sysupgrade-相容的映像檔在這以便替代正執行中的韌體. 勾選\"保持設定"
+"\"以保留目前設定值(必須要是OpenWrt/LEDE相容性韌體映像檔)."
msgid "Upload archive..."
msgstr "上傳壓縮檔..."
msgid "VDSL"
msgstr ""
-msgid "VLAN Interface"
-msgstr "VLAN介面"
-
msgid "VLANs on %q"
msgstr "VLAN 在 %q"
msgid "Width"
msgstr ""
-msgid "Wifi"
-msgstr "WIFI無線"
+msgid "WireGuard VPN"
+msgstr ""
msgid "Wireless"
msgstr "無線網路"
msgid "Write received DNS requests to syslog"
msgstr "寫入已接收的DNS請求到系統日誌中"
+msgid "Write system log to file"
+msgstr ""
+
msgid "XR Support"
msgstr "支援XR無線陣列"
msgid "« Back"
msgstr "« 倒退"
-#~ msgid "Delete this interface"
-#~ msgstr "刪除這個介面"
-
-#~ msgid "Flags"
-#~ msgstr "旗標"
-
-#~ msgid "Rule #"
-#~ msgstr "規則 #"
-
-#~ msgid "Ignore Hosts files"
-#~ msgstr "被忽視的主機檔案"
-
-#~ msgid "Please wait: Device rebooting..."
-#~ msgstr "請稍等:設備正重開中..."
-
-#~ msgid ""
-#~ "Warning: There are unsaved changes that will be lost while rebooting!"
-#~ msgstr "警告:重開機後某些未存檔的修改將會漏失!"
-
-#~ msgid ""
-#~ "Always use 40MHz channels even if the secondary channel overlaps. Using "
-#~ "this option does not comply with IEEE 802.11n-2009!"
-#~ msgstr ""
-#~ "強制啟用40MHz頻寬並忽略輔助通道重疊。此選項不相容於IEEE 802.11n-2009!"
-
-#~ msgid "Cached"
-#~ msgstr "已快取"
-
-#~ msgid "Configures this mount as overlay storage for block-extroot"
-#~ msgstr "要採用block-extroot功能,設定這個掛載點當作覆蓋儲存"
-
-#~ msgid "Force 40MHz mode"
-#~ msgstr "強制40MHz模式"
-
-#~ msgid "Frequency Hopping"
-#~ msgstr "跳頻"
-
-#~ msgid "Locked to channel %d used by %s"
-#~ msgstr "鎖定通道 由 %s 使用的 %d "
-
-#~ msgid "Use as root filesystem"
-#~ msgstr "當作root檔案系統"
-
-#~ msgid "HE.net user ID"
-#~ msgstr "HE.net用戶識別碼ID"
-
-#~ msgid "This is the 32 byte hex encoded user ID, not the login name"
-#~ msgstr "這是32字元16進制用戶ID編碼,並非登入名稱"
-
-#~ msgid "40MHz 2nd channel above"
-#~ msgstr "40MHz的上述第二通道"
-
-#~ msgid "40MHz 2nd channel below"
-#~ msgstr "40MHz的下述第二通道"
-
-#~ msgid "Accept router advertisements"
-#~ msgstr "接收路由器通告"
-
-#~ msgid "Advertise IPv6 on network"
-#~ msgstr "在網路上通知IPv6"
-
-#~ msgid "Advertised network ID"
-#~ msgstr "通知網路ID"
-
-#~ msgid "Allowed range is 1 to 65535"
-#~ msgstr "允許範圍為1到65535"
-
-#~ msgid "HT capabilities"
-#~ msgstr "HT頻寬能力"
-
-#~ msgid "HT mode"
-#~ msgstr "HT頻寬模式"
-
-#~ msgid "Router Model"
-#~ msgstr "路由器型號Model"
-
-#~ msgid "Router Name"
-#~ msgstr "路由器名稱"
+#~ msgid "An additional network will be created if you leave this unchecked."
+#~ msgstr "取消選取將會另外建立一個新網路，而不會覆蓋目前的網路設定"
-#~ msgid "Send router solicitations"
-#~ msgstr "å\82³é\80\81è·¯ç\94±å\99¨é\82\80è«\8bå°\81å\8c\85"
+#~ msgid "Join Network: Settings"
+#~ msgstr "å\8a å\85¥ç¶²è·¯ç\9a\84è¨å®\9a"
-#~ msgid "Specifies the advertised preferred prefix lifetime in seconds"
-#~ msgstr "指定這個公告較愛字首的生命週期以秒表示"
+#~ msgid "CPU"
+#~ msgstr "CPU"
-#~ msgid "Specifies the advertised valid prefix lifetime in seconds"
-#~ msgstr "指定這個公告有效字首的生命週期以秒表示"
+#~ msgid "Port %d"
+#~ msgstr "埠 %d"
-#~ msgid "Use preferred lifetime"
-#~ msgstr "使用首選的生命週期"
+#~ msgid "Port %d is untagged in multiple VLANs!"
+#~ msgstr "埠 %d 尚未標記在多個VLANs中!"
-#~ msgid "Use valid lifetime"
-#~ msgstr "使用正確的生命週期"
+#~ msgid "VLAN Interface"
+#~ msgstr "VLAN介面"
projects / project / luci.git / blobdiff