"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-12-21 23:08+0200\n"
-"PO-Revision-Date: 2015-04-23 13:49+0800\n"
+"PO-Revision-Date: 2015-12-20 13:14+0800\n"
"Last-Translator: GuoGuo <gch981213@gmail.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Poedit 1.7.5\n"
+"X-Generator: Poedit 1.8.5\n"
+"Language-Team: \n"
+
+msgid "%s is untagged in multiple VLANs!"
+msgstr ""
msgid "(%d minute window, %d second interval)"
msgstr "(%d分钟信息，%d秒刷新)"
msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
msgstr "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
+msgid "A43C + J43 + A43"
+msgstr ""
+
+msgid "A43C + J43 + A43 + V43"
+msgstr ""
+
msgid "ADSL"
msgstr "ADSL"
-msgid "ADSL Status"
-msgstr "ADSL状态"
-
msgid "AICCU (SIXXS)"
msgstr ""
+msgid "ANSI T1.413"
+msgstr ""
+
msgid "APN"
msgstr "APN"
msgid "ARP retry threshold"
msgstr "ARP重试阈值"
+msgid "ATM (Asynchronous Transfer Mode)"
+msgstr ""
+
msgid "ATM Bridges"
msgstr "ATM桥接"
msgid "ATM device number"
msgstr "ATM设备号码"
+msgid "ATU-C System Vendor ID"
+msgstr ""
+
msgid "AYIYA"
msgstr ""
msgid "Advanced Settings"
msgstr "高级设置"
+msgid "Aggregate Transmit Power(ACTATP)"
+msgstr ""
+
msgid "Alert"
msgstr "警戒"
+msgid ""
+"Allocate IP addresses sequentially, starting from the lowest available "
+"address"
+msgstr ""
+
+msgid "Allocate IP sequentially"
+msgstr ""
+
msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
msgstr "允许<abbr title=\"Secure Shell\">SSH</abbr>密码验证"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr "允许127.0.0.0/8回环范围内的上行响应，例如：RBL服务"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr "总是广播默认路由"
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "取消选中将会另外创建一个新网络，而不会覆盖当前网络设置"
+msgid "An additional network will be created if you leave this checked."
+msgstr ""
+
+msgid "Annex"
+msgstr ""
+
+msgid "Annex A + L + M (all)"
+msgstr ""
+
+msgid "Annex A G.992.1"
+msgstr ""
+
+msgid "Annex A G.992.2"
+msgstr ""
+
+msgid "Annex A G.992.3"
+msgstr ""
+
+msgid "Annex A G.992.5"
+msgstr ""
+
+msgid "Annex B (all)"
+msgstr ""
+
+msgid "Annex B G.992.1"
+msgstr ""
+
+msgid "Annex B G.992.3"
+msgstr ""
+
+msgid "Annex B G.992.5"
+msgstr ""
+
+msgid "Annex J (all)"
+msgstr ""
+
+msgid "Annex L G.992.3 POTS 1"
+msgstr ""
+
+msgid "Annex M (all)"
+msgstr ""
+
+msgid "Annex M G.992.3"
+msgstr ""
+
+msgid "Annex M G.992.5"
+msgstr ""
msgid "Announce as default router even if no public prefix is available."
msgstr "即使没有可用的公共前缀也广播默认路由"
msgid "Announced DNS servers"
msgstr "广播的DNS服务器"
+msgid "Anonymous Identity"
+msgstr ""
+
+msgid "Anonymous Mount"
+msgstr "自动挂载未配置的磁盘分区"
+
+msgid "Anonymous Swap"
+msgstr "自动挂载未配置的Swap分区"
+
msgid "Antenna 1"
msgstr "天线 1"
msgid "Atheros 802.11%s Wireless Controller"
msgstr "Qualcomm/Atheros 802.11%s 无线网卡"
+msgid "Auth Group"
+msgstr ""
+
msgid "AuthGroup"
msgstr "认证组"
msgid "Automatic Homenet (HNCP)"
msgstr "自动家庭网络(HNCP)"
+msgid "Automatically check filesystem for errors before mounting"
+msgstr "在挂载前自动检查文件系统错误"
+
+msgid "Automatically mount filesystems on hotplug"
+msgstr "通过hotplug自动挂载磁盘"
+
+msgid "Automatically mount swap on hotplug"
+msgstr "通过hotplug自动挂载Swap分区"
+
+msgid "Automount Filesystem"
+msgstr "自动挂载磁盘"
+
+msgid "Automount Swap"
+msgstr "自动挂载Swap"
+
msgid "Available"
msgstr "可用"
msgid "Average:"
msgstr "平均:"
+msgid "B43 + B43C"
+msgstr ""
+
+msgid "B43 + B43C + V43"
+msgstr ""
+
msgid "BR / DMR / AFTR"
msgstr ""
"下面是待备份的文件清单。包含了更改的配置文件、必要的基础文件和用户自定义的需"
"备份文件。"
+msgid "Bind interface"
+msgstr ""
+
+msgid "Bind only to specific interfaces rather than wildcard address."
+msgstr ""
+
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "传输速率"
msgid ""
"Build/distribution specific feed definitions. This file will NOT be "
"preserved in any sysupgrade."
-msgstr ""
+msgstr "由固件指定的软件源。此处的设置在任何系统升级中都不会被保留。"
msgid "Buttons"
msgstr "按键"
msgid "CA certificate; if empty it will be saved after the first connection."
msgstr "CA证书.如果留空的话证书将在第一次连接时被保存."
-msgid "CPU"
-msgstr "CPU"
-
msgid "CPU usage (%)"
msgstr "CPU使用率(%)"
msgid "Check"
msgstr "检查"
+msgid "Check fileystems before mount"
+msgstr "在挂载前检查文件系统"
+
msgid "Checksum"
msgstr "校验值"
msgid "Cipher"
msgstr "算法"
+msgid "Cisco UDP encapsulation"
+msgstr ""
+
msgid ""
"Click \"Generate archive\" to download a tar archive of the current "
"configuration files. To reset the firmware to its initial state, click "
"Custom feed definitions, e.g. private feeds. This file can be preserved in a "
"sysupgrade."
msgstr ""
+"自定义的软件源地址（例如私有的软件源）。此处设定的源地址在系统升级时将被保留"
msgid "Custom feeds"
-msgstr ""
+msgstr "自定义的软件源"
msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
msgid "DNS-Label / FQDN"
msgstr ""
+msgid "DNSSEC"
+msgstr ""
+
+msgid "DNSSEC check unsigned"
+msgstr ""
+
+msgid "DPD Idle Timeout"
+msgstr ""
+
msgid "DS-Lite AFTR address"
msgstr ""
+msgid "DSL"
+msgstr ""
+
+msgid "DSL Status"
+msgstr ""
+
+msgid "DSL line mode"
+msgstr ""
+
msgid "DUID"
msgstr "DUID（DHCP唯一标识符）"
+msgid "Data Rate"
+msgstr ""
+
msgid "Debug"
msgstr "调试"
msgid "Default gateway"
msgstr "默认网关"
+msgid "Default is stateless + stateful"
+msgstr ""
+
msgid "Default route"
msgstr "默认路由"
msgid "Delete"
msgstr "删除"
-msgid "Delete this interface"
-msgstr "删除此接口"
-
msgid "Delete this network"
msgstr "删除此网络"
msgstr "设备配置"
msgid "Device is rebooting..."
-msgstr ""
+msgstr "设备正在重启..."
msgid "Device unreachable"
-msgstr ""
+msgstr "无法连接到设备"
msgid "Diagnostics"
msgstr "网络诊断"
msgid "Disable DNS setup"
msgstr "停用DNS设定"
+msgid "Disable Encryption"
+msgstr ""
+
msgid "Disable HW-Beacon timer"
msgstr "停用 HW-Beacon 计时器"
msgstr "最远客户端的距离(米)。"
msgid "Distribution feeds"
-msgstr ""
+msgstr "发行版软件源"
msgid "Diversity"
msgstr "分集"
msgid "Domain whitelist"
msgstr "域名白名单"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid ""
"Edit the raw configuration data above to fix any error and hit \"Save\" to "
"reload the page."
-msgstr ""
+msgstr "编辑上方的原始配置以修复错误并按下“保存”按钮以重新载入此页面。"
msgid "Edit this interface"
msgstr "修改此接口"
msgid "Enable HE.net dynamic endpoint update"
msgstr "启用HE.net动态终端更新"
+msgid "Enable IPv6 negotiation on the PPP link"
+msgstr "在PPP链路上启用IPv6协商"
+
msgid "Enable Jumbo Frame passthrough"
msgstr "启用巨型帧透传"
msgid "Enable NTP client"
msgstr "启用NTP客户端"
+msgid "Enable Single DES"
+msgstr ""
+
msgid "Enable TFTP server"
msgstr "启用TFTP服务器"
msgid "Enable mirroring of outgoing packets"
msgstr "启用流出数据包镜像"
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "启用挂载点"
msgid "Encryption"
msgstr "加密"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "擦除中..."
msgid "Error"
msgstr "错误"
+msgid "Errored seconds (ES)"
+msgstr ""
+
msgid "Ethernet Adapter"
msgstr "以太网适配器"
msgid "Ethernet Switch"
msgstr "以太网交换机"
+msgid "Exclude interfaces"
+msgstr ""
+
msgid "Expand hosts"
msgstr "扩展HOSTS文件中的主机后缀"
msgid "External system log server port"
msgstr "远程log服务器端口"
+msgid "External system log server protocol"
+msgstr ""
+
+msgid "Extra SSH command options"
+msgstr "额外的SSH命令选项"
+
msgid "Fast Frames"
msgstr "快速帧"
msgid "Filter useless"
msgstr "过滤无用包"
+msgid ""
+"Find all currently attached filesystems and swap and replace configuration "
+"with defaults based on what was detected"
+msgstr ""
+"查找所有当前系统上的分区和Swap并使用基于所找到的分区生成的配置文件替换默认配"
+"置。"
+
msgid "Find and join network"
msgstr "搜索并加入网络"
msgid "Firewall Status"
msgstr "防火墙状态"
+msgid "Firmware File"
+msgstr ""
+
msgid "Firmware Version"
msgstr "固件版本"
msgid "Fixed source port for outbound DNS queries"
msgstr "指定的DNS查询源端口"
-msgid "Flags"
-msgstr "标识"
-
msgid "Flash Firmware"
msgstr "刷新固件"
msgid "Force TKIP and CCMP (AES)"
msgstr "TKIP和CCMP(AES)混合加密"
+msgid "Force use of NAT-T"
+msgstr ""
+
msgid "Form token mismatch"
msgstr ""
msgid "Forward DHCP traffic"
msgstr "转发DHCP数据包"
+msgid "Forward Error Correction Seconds (FECS)"
+msgstr ""
+
msgid "Forward broadcast traffic"
msgstr "转发广播数据包"
msgid "Free space"
msgstr "空闲空间"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgstr "基本设置"
msgid "General options for opkg"
-msgstr ""
+msgstr "opkg基础配置"
+
+msgid "Generate Config"
+msgstr "生成配置"
msgid "Generate archive"
msgstr "生成备份"
msgid "Given password confirmation did not match, password not changed!"
msgstr "由于密码验证不匹配，密码没有更改！"
+msgid "Global Settings"
+msgstr "全局设置"
+
msgid "Global network options"
msgstr "全局网络选项"
msgid "Go to relevant configuration page"
msgstr "跳转到相关的配置页面"
+msgid "Group Password"
+msgstr ""
+
msgid "Guest"
msgstr "访客"
msgid "HE.net username"
msgstr "HE.net用户名"
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "处理程序"
msgid "Hang Up"
msgstr "挂起"
+msgid "Header Error Code Errors (HEC)"
+msgstr ""
+
msgid "Heartbeat"
msgstr "心跳"
msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
msgstr "隐藏<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
+msgid "Host"
+msgstr ""
+
msgid "Host entries"
msgstr "主机目录"
msgid "Hybrid"
msgstr "混合"
+msgid "IKE DH Group"
+msgstr ""
+
msgid "IP address"
msgstr "IP地址"
msgstr "仅IPv4"
msgid "IPv4 prefix"
-msgstr ""
+msgstr "IPv4地址前缀"
msgid "IPv4 prefix length"
msgstr "IPv4地址前缀长度"
msgid "IPv4-Address"
msgstr "IPv4-地址"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "Identity"
msgstr "鉴权"
+msgid "If checked, 1DES is enaled"
+msgstr ""
+
+msgid "If checked, encryption is disabled"
+msgstr ""
+
msgid ""
"If specified, mount the device by its UUID instead of a fixed device node"
msgstr "用UUID来挂载设备"
msgid "Interface is shutting down..."
msgstr "正在关闭接口..."
+msgid "Interface name"
+msgstr ""
+
msgid "Interface not present or not connected yet."
msgstr "接口不存在或未连接"
msgid "Join Network"
msgstr "加入网络"
-msgid "Join Network: Settings"
-msgstr "加入网络:设置"
-
msgid "Join Network: Wireless Scan"
msgstr "加入网络:搜索无线"
+msgid "Joining Network: %q"
+msgstr ""
+
msgid "Keep settings"
msgstr "保留配置"
msgid "Language and Style"
msgstr "语言和界面"
+msgid "Latency"
+msgstr ""
+
msgid "Leaf"
msgstr "叶子"
+msgid "Lease time"
+msgstr ""
+
msgid "Lease validity time"
msgstr "有效租期"
msgid "Limit"
msgstr "客户数"
-msgid "Line Attenuation"
+msgid "Limit DNS service to subnets interfaces on which we are serving DNS."
+msgstr ""
+
+msgid "Limit listening to these interfaces, and loopback."
+msgstr ""
+
+msgid "Line Attenuation (LATN)"
msgstr ""
-msgid "Line Speed"
-msgstr "线路速率"
+msgid "Line Mode"
+msgstr ""
msgid "Line State"
msgstr "线路状态"
+msgid "Line Uptime"
+msgstr ""
+
msgid "Link On"
msgstr "活动链接"
"requests to"
msgstr "将指定的域名DNS解析转发到指定的DNS服务器（按照示例填写）"
+msgid "List of SSH key files for auth"
+msgstr ""
+
msgid "List of domains to allow RFC1918 responses for"
msgstr "允许RFC1918响应的域名列表"
msgid "List of hosts that supply bogus NX domain results"
msgstr "允许虚假空域名响应的服务器列表"
+msgid "Listen Interfaces"
+msgstr ""
+
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr "监听指定的接口；未指定则监听全部"
msgid "Loading"
msgstr "加载中"
+msgid "Local IP address to assign"
+msgstr ""
+
msgid "Local IPv4 address"
msgstr "本地IPv4地址"
msgid "Local IPv6 address"
msgstr "本地IPv6地址"
+msgid "Local Service Only"
+msgstr ""
+
msgid "Local Startup"
msgstr "本地启动脚本"
msgid "Localise queries"
msgstr "本地化查询"
-msgid "Locked to channel %d used by: %s"
-msgstr "信道道已被锁定为 %d,因为该信道被 %s 使用"
+msgid "Locked to channel %s used by: %s"
+msgstr "信道道已被锁定为 %s,因为该信道被 %s 使用"
msgid "Log output level"
msgstr "日志记录等级"
msgid "Logout"
msgstr "退出"
+msgid "Loss of Signal Seconds (LOSS)"
+msgstr ""
+
msgid "Lowest leased address as offset from the network address."
msgstr "网络地址的起始分配基址。"
msgid "MB/s"
msgstr "MB/s"
+msgid "MD5"
+msgstr ""
+
msgid "MHz"
msgstr "MHz"
msgid "Manual"
msgstr ""
+msgid "Max. Attainable Data Rate (ATTNDR)"
+msgstr ""
+
msgid "Maximum Rate"
msgstr "最高速率"
msgid "Maximum hold time"
msgstr "最大持续时间"
+msgid ""
+"Maximum length of the name is 15 characters including the automatic protocol/"
+"bridge prefix (br-, 6in4-, pppoe- etc.)"
+msgstr ""
+
msgid "Maximum number of leased addresses."
msgstr "最大地址分配数量。"
"filesystem"
msgstr "配置存储设备挂载到文件系统中的位置和参数。"
+msgid "Mount filesystems not specifically configured"
+msgstr "自动挂载未专门配置挂载点的分区"
+
msgid "Mount options"
msgstr "挂载选项"
msgid "Mount point"
msgstr "挂载点"
+msgid "Mount swap not specifically configured"
+msgstr "自动挂载未专门配置的Swap分区"
+
msgid "Mounted file systems"
msgstr "已挂载的文件系统"
msgid "NAS ID"
msgstr "NAS ID"
+msgid "NAT-T Mode"
+msgstr ""
+
msgid "NAT64 Prefix"
msgstr ""
msgid "NDP-Proxy"
msgstr "NDP-代理"
+msgid "NT Domain"
+msgstr ""
+
msgid "NTP server candidates"
msgstr "候选NTP服务器"
msgid "No DHCP Server configured for this interface"
msgstr "本接口未配置DHCP服务器"
+msgid "No NAT-T"
+msgstr ""
+
msgid "No chains in this table"
msgstr "本表中没有链"
msgid "Noise"
msgstr "噪声"
-msgid "Noise Margin"
-msgstr "噪声容限"
+msgid "Noise Margin (SNR)"
+msgstr ""
msgid "Noise:"
msgstr "噪声:"
+msgid "Non Pre-emtive CRC errors (CRC_P)"
+msgstr ""
+
+msgid "Non-wildcard"
+msgstr ""
+
msgid "None"
msgstr "无"
msgid "Note: Configuration files will be erased."
msgstr "注意：配置文件将被删除。"
+msgid "Note: interface name length"
+msgstr ""
+
msgid "Notice"
msgstr "注意"
msgid "OPKG-Configuration"
msgstr "OPKG-配置"
+msgid "Obfuscated Group Password"
+msgstr ""
+
+msgid "Obfuscated Password"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "关闭时间"
msgid "One or more fields contain invalid values!"
msgstr "一个或多个选项值有误！"
+msgid "One or more invalid/required values on tab"
+msgstr ""
+
msgid "One or more required fields have no value!"
msgstr "一个或多个必选项值为空！"
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr "可选,如果你的SIXXS账号拥有一个以上的隧道请设置此项."
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. Adds in an additional layer of symmetric-key cryptography for post-"
+"quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "选项"
msgid "Override MTU"
msgstr "设置MTU"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
+msgid "Override default interface name"
+msgstr ""
+
msgid "Override the gateway in DHCP responses"
msgstr "更新网关"
msgid "PPPoE"
msgstr "PPPoE"
+msgid "PPPoSSH"
+msgstr ""
+
msgid "PPtP"
msgstr "PPtP"
msgid "PSID-bits length"
msgstr ""
+msgid "PTM/EFM (Packet Transfer Mode)"
+msgstr ""
+
msgid "Package libiwinfo required!"
msgstr "需要libiwinfo软件包！"
msgid "Password of Private Key"
msgstr "私有密钥"
+msgid "Password of inner Private Key"
+msgstr ""
+
msgid "Password successfully changed!"
msgstr "密码修改成功！"
msgid "Path to executable which handles the button event"
msgstr "处理按键动作的可执行文件路径"
+msgid "Path to inner CA-Certificate"
+msgstr ""
+
+msgid "Path to inner Client-Certificate"
+msgstr ""
+
+msgid "Path to inner Private Key"
+msgstr ""
+
msgid "Peak:"
msgstr "峰值:"
+msgid "Peer IP address to assign"
+msgstr ""
+
+msgid "Peers"
+msgstr ""
+
+msgid "Perfect Forward Secrecy"
+msgstr ""
+
msgid "Perform reboot"
msgstr "执行重启"
msgid "Perform reset"
msgstr "执行复位"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "物理速率:"
msgid "Port"
msgstr "端口"
-msgid "Port %d"
-msgstr "端口 %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "端口 %d 在多个VLAN中均未关联！"
-
msgid "Port status:"
msgstr "端口状态："
+msgid "Power Management Mode"
+msgstr ""
+
+msgid "Pre-emtive CRC errors (CRCP_P)"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgstr "在指定数量的LCP响应故障后假定链路已断开，0为忽略故障"
+msgid "Prevent listening on these interfaces."
+msgstr ""
+
msgid "Prevents client-to-client communication"
msgstr "禁止客户端间通信"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Prism2/2.5/3 802.11b 无线网卡"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "执行"
msgid "Processes"
msgstr "系统进程"
+msgid "Profile"
+msgstr ""
+
msgid "Prot."
msgstr "协议"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "伪装Ad-Hoc(ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
msgid "Quality"
msgstr "质量"
+msgid "RFC3947 NAT-T mode"
+msgstr ""
+
msgid "RTS/CTS Threshold"
msgstr "RTS/CTS阈值"
msgstr "重启中..."
msgid "Reboots the operating system of your device"
-msgstr "重启OpenWrt"
+msgstr "重启您设备上的系统"
msgid "Receive"
msgstr "接收"
msgid "Remote IPv4 address"
msgstr "远程IPv4地址"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "移除"
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "某些ISP需要，例如:同轴线网络DOCSIS 3"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid "Required. Public key of peer."
+msgstr ""
+
+msgid ""
+"Requires upstream supports DNSSEC; verify unsigned domain responses really "
+"come from unsigned domains"
+msgstr ""
+
msgid "Reset"
msgstr "复位"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
"can be reached."
msgstr "路由表描述了数据包的可达路径。"
-msgid "Rule #"
-msgstr "规则 #"
-
msgid "Run a filesystem check before mounting the device"
msgstr "挂载设备前运行文件系统检查"
msgid "Run filesystem check"
msgstr "文件系统检查"
+msgid "SHA256"
+msgstr ""
+
msgid ""
"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
"use 6in4 instead"
msgid "SIXXS-handle[/Tunnel-ID]"
msgstr ""
+msgid "SNR"
+msgstr ""
+
msgid "SSH Access"
msgstr "SSH访问"
+msgid "SSH server address"
+msgstr "SSH服务器地址"
+
+msgid "SSH server port"
+msgstr "SSH服务器端口"
+
+msgid "SSH username"
+msgstr "SSH用户名"
+
msgid "SSH-Keys"
msgstr "SSH-密钥"
msgid "Setup DHCP Server"
msgstr "配置DHCP服务器"
+msgid "Severely Errored Seconds (SES)"
+msgstr ""
+
+msgid "Short GI"
+msgstr ""
+
msgid "Show current backup file list"
msgstr "显示当前文件备份列表"
msgid "Signal"
msgstr "信号"
+msgid "Signal Attenuation (SATN)"
+msgstr ""
+
msgid "Signal:"
msgstr "信号:"
msgid "Software"
msgstr "软件包"
+msgid "Software VLAN"
+msgstr ""
+
msgid "Some fields are invalid, cannot save values!"
msgstr "一些项目的值无效，无法保存！"
msgid "Sorry, the server encountered an unexpected error."
msgstr "对不起，服务器遇到未知错误。"
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
-"抱歉，当前系统不支持sysupgrade升级，需手动刷新固件。请参考OpenWrt Wiki中此设"
-"备特定的安装向导。"
+"抱歉，您的设备暂不支持sysupgrade升级，需手动更新固件。请参考Wiki中关于此设备"
+"的固件更新说明。"
msgid "Sort"
msgstr "排序"
"dead"
msgstr "指定假设主机已丢失的最大时间(秒)"
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "在此指定密钥。"
msgid "Submit"
msgstr "提交"
+msgid "Suppress logging"
+msgstr ""
+
+msgid "Suppress logging of the routine operation of these protocols"
+msgstr ""
+
msgid "Swap"
msgstr "交换区"
msgid "Switch %q (%s)"
msgstr "交换机%q (%s)"
+msgid ""
+"Switch %q has an unknown topology - the VLAN settings might not be accurate."
+msgstr ""
+
+msgid "Switch VLAN"
+msgstr ""
+
msgid "Switch protocol"
msgstr "切换协议"
msgid "Target"
msgstr "对象"
+msgid "Target network"
+msgstr ""
+
msgid "Terminate"
msgstr "关闭"
msgstr "HE.net客户端更新设置已经被改变,您现在必须使用用户名代替用户ID/"
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr "运营商特定的IPv6前缀，通常以<code>::</code>为结尾"
"code>"
msgid "The configuration file could not be loaded due to the following error:"
-msgstr ""
+msgstr "由于以下错误，配置文件无法被加载："
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
msgid "The length of the IPv6 prefix in bits"
msgstr "bit格式的IPv6前缀长度"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
"when finished."
msgstr "系统正在删除配置分区，完成后会自动重启。"
-#, fuzzy
msgid ""
"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
"few minutes before you try to reconnect. It might be necessary to renew the "
"address of your computer to reach the device again, depending on your "
"settings."
msgstr ""
-"æ£å\9c¨å\88·æ\96°ç³»ç»\9f...<br />å\88\87å\8b¿å\85³é\97ç\94µæº\90! DO NOT POWER OFF THE DEVICE!<br />ç¨\8dç\89数分"
-"é\92\9få\8d³å\8f¯é\87\8dæ\96°è¿\9eæ\8e¥å\88°è·¯ç\94±ã\80\82可能需要更改计算机的IP地址以重新连接。"
+"æ£å\9c¨å\88·æ\96°ç³»ç»\9f...<br />å\88\87å\8b¿å\85³é\97ç\94µæº\90! DO NOT POWER OFF THE DEVICE!<br />ç\89å¾\85数分"
+"é\92\9få\90\8eå\8d³å\8f¯å°\9dè¯\95é\87\8dæ\96°è¿\9eæ\8e¥å\88°è·¯ç\94±ã\80\82æ\82¨可能需要更改计算机的IP地址以重新连接。"
msgid ""
"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
"archive here."
msgstr "上传备份存档以恢复配置。"
+msgid "Tone"
+msgstr ""
+
msgid "Total Available"
msgstr "可用数"
msgid "Unable to dispatch"
msgstr "无法调度"
+msgid "Unavailable Seconds (UAS)"
+msgstr ""
+
msgid "Unknown"
msgstr "未知"
msgid "Unmanaged"
msgstr "不配置协议"
+msgid "Unmount"
+msgstr "卸载分区"
+
msgid "Unsaved Changes"
msgstr "未保存的配置"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr "上传兼容的sysupgrade固件以刷新当前系统。"
msgid "Upload archive..."
"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
+"requesting host. The optional <em>Lease time</em> can be used to set non-"
+"standard host-specific lease time, e.g. 12h, 3d or infinite."
msgstr ""
"使用<em>添加</em>来增加新的租约条目。使用<em>MAC-地址</em>鉴别主机，<em>IPv4-"
"地址</em>分配地址，<em>主机名</em>分配标识。"
msgid "VC-Mux"
msgstr "VC-Mux"
-msgid "VLAN Interface"
-msgstr "VLAN接口"
+msgid "VDSL"
+msgstr ""
msgid "VLANs on %q"
msgstr "%q上的VLAN"
msgid "VLANs on %q (%s)"
msgstr "%q (%s)上的VLAN"
+msgid "VPN Local address"
+msgstr ""
+
+msgid "VPN Local port"
+msgstr ""
+
msgid "VPN Server"
msgstr "VPN服务器"
msgid "VPN Server's certificate SHA1 hash"
msgstr "VPN服务器证书的SHA1哈希值"
+msgid "VPNC (CISCO 3000 (and others) VPN)"
+msgstr ""
+
+msgid "Vendor"
+msgstr ""
+
msgid "Vendor Class to send when requesting DHCP"
msgstr "请求DHCP时发送的Vendor Class"
msgstr "正在执行命令..."
msgid "Waiting for device..."
-msgstr ""
+msgstr "等待设备..."
msgid "Warning"
msgstr "警告"
msgid "Warning: There are unsaved changes that will get lost on reboot!"
-msgstr ""
+msgstr "警告：有一些未保存的配置将在重启后丢失！"
msgid "Whether to create an IPv6 default route over the tunnel"
msgstr ""
msgid "Width"
msgstr "频宽"
-msgid "Wifi"
-msgstr "无线"
+msgid "WireGuard VPN"
+msgstr ""
msgid "Wireless"
msgstr "无线"
msgid "Write received DNS requests to syslog"
msgstr "将收到的DNS请求写入系统日志"
+msgid "Write system log to file"
+msgstr ""
+
msgid "XR Support"
msgstr "XR支持"
msgid "« Back"
msgstr "« 后退"
-#~ msgid "Enable IPv6 negotiation on the PPP link"
-#~ msgstr "在PPP链路上启用IPv6协商"
-
-#~ msgid "Ignore Hosts files"
-#~ msgstr "忽略HOSTS文件"
-
-#~ msgid "Path"
-#~ msgstr "路径"
-
-#~ msgid "Please wait: Device rebooting..."
-#~ msgstr "请稍等：设备重启中..."
-
-#~ msgid ""
-#~ "Warning: There are unsaved changes that will be lost while rebooting!"
-#~ msgstr "警告: 有尚未保存的更改，重启将丢失!"
-
-#~ msgid "CPU frequency"
-#~ msgstr "CPU 频率"
-
-#~ msgid "Chip Model"
-#~ msgstr "芯片型号"
-
-#~ msgid ""
-#~ "Always use 40MHz channels even if the secondary channel overlaps. Using "
-#~ "this option does not comply with IEEE 802.11n-2009!"
-#~ msgstr "强制启用40MHz频宽并忽略辅助信道重叠。此选项不兼容IEEE 802.11n-2009!"
-
-#~ msgid "Cached"
-#~ msgstr "已缓存"
-
-#~ msgid "Configures this mount as overlay storage for block-extroot"
-#~ msgstr "设置挂载为extroot"
-
-#~ msgid "Force 40MHz mode"
-#~ msgstr "强制40MHz频宽"
-
-#~ msgid "Frequency Hopping"
-#~ msgstr "跳频"
-
-#~ msgid "Locked to channel %d used by %s"
-#~ msgstr "信道已锁定为:%d ；源于:%s "
-
-#~ msgid "Use as root filesystem"
-#~ msgstr "设置为根文件系统"
-
-#~ msgid "Ad-hoc mode"
-#~ msgstr "Ad-hoc模式"
-
-#~ msgid "HE.net user ID"
-#~ msgstr "HE.net用户ID"
-
-#~ msgid "This is the 32 byte hex encoded user ID, not the login name"
-#~ msgstr "这是32 byte hex编码的用户ID，不是登录名"
-
-#~ msgid "40MHz 2nd channel above"
-#~ msgstr "40MHz HT40+ (仅1-7频道可用）"
-
-#~ msgid "40MHz 2nd channel below"
-#~ msgstr "40MHz HT40- (仅5-13频道可用）"
-
-#~ msgid "Accept router advertisements"
-#~ msgstr "接收路由通告"
-
-#~ msgid "Advertise IPv6 on network"
-#~ msgstr "在网络上通告IPv6"
-
-#~ msgid "Advertised network ID"
-#~ msgstr "通告的网络ID"
-
-#~ msgid "Allowed range is 1 to 65535"
-#~ msgstr "允许的范围：1 到 65535"
-
-#~ msgid "HT capabilities"
-#~ msgstr "HT功能"
-
-#~ msgid "HT mode"
-#~ msgstr "HT模式"
-
-#~ msgid "Router Model"
-#~ msgstr "主机型号"
-
-#~ msgid "Router Name"
-#~ msgstr "系统名称"
-
-#~ msgid "Send router solicitations"
-#~ msgstr "发送路由请求"
-
-#~ msgid "Specifies the advertised preferred prefix lifetime in seconds"
-#~ msgstr "指定通告的首选前缀生存时间(秒)"
-
-#~ msgid "Specifies the advertised valid prefix lifetime in seconds"
-#~ msgstr "指定通告的有效前缀生存时间(秒)"
-
-#~ msgid "Use preferred lifetime"
-#~ msgstr "使用首选生存时间"
-
-#~ msgid "Use valid lifetime"
-#~ msgstr "使用有效生存时间"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "等待路由器..."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "开启内置NTP服务器"
-
-#~ msgid "Active Leases"
-#~ msgstr "活动的租约"
-
-#~ msgid "Open"
-#~ msgstr "打开"
-
-#~ msgid "KB"
-#~ msgstr "KB"
-
-#~ msgid "Bit Rate"
-#~ msgstr "比特率"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "设置 /应用"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "设置 / 修改"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "设置 / 重置"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "MAC地址"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encrypted\">加密</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "搜索<abbr title=\"Wireless Local Area Network\">WLAN</abbr>"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "请选择你需要链接到无线网络接口的网络. 如果不链接到任何网络请选择 <em>未指"
-#~ "定</em>,如果需要创建新网络请点<em>创建</em>."
-
-#~ msgid "Create Network"
-#~ msgstr "创建一个网络"
-
-#~ msgid "Link"
-#~ msgstr "链接"
-
-#~ msgid "Networks"
-#~ msgstr "网络"
-
-#~ msgid "Power"
-#~ msgstr "Power"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "扫描到的无线热点"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-服务器"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-广播"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-地址"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "IP-Aliases"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "IPv6 设置"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "注意：当你选择一个已经存在与一个网络中的接口时，它将会被移除那个网络。"
-
-#~ msgid ""
-#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
-#~ "lose access to this router if you are connected via this interface."
-#~ msgstr ""
-#~ "Really delete this interface? The deletion cannot be undone!\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "interface."
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "network."
-
-#~ msgid ""
-#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
-#~ "if you are connected via this interface."
-#~ msgstr ""
-#~ "Really shutdown interface \"%s\" ?\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "interface."
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might lose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "Really shutdown network ?\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "interface."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "本设备可以划分为多个<abbr title=\"Virtual Local Area Network\">VLAN</"
-#~ "abbr>，并支持电脑间的直接通讯；<abbr title=\"Virtual Local Area Network"
-#~ "\">VLAN</abbr>也常用于分割不同网段；默认通常是一条上传端口连接ISP，其余端"
-#~ "口为本地子网。"
-
-#~ msgid "Enable buffering"
-#~ msgstr "开启缓冲"
-
-#~ msgid "IPv6-over-IPv4"
-#~ msgstr "IPv6-over-IPv4"
-
-#~ msgid "Custom Files"
-#~ msgstr "自定义文件"
-
-#~ msgid "Custom files"
-#~ msgstr "自定义文件"
-
-#~ msgid "Detected Files"
-#~ msgstr "查询到的文件"
-
-#~ msgid "Detected files"
-#~ msgstr "查询到的文件"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "更新固件时被保存的文件"
-
-#~ msgid "General"
-#~ msgstr "基本信息"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "这里可以自定义<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的组"
-#~ "件和功能。"
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Post-commit操作"
-
-#~ msgid ""
-#~ "The following files are detected by the system and will be kept "
-#~ "automatically during sysupgrade"
-#~ msgstr "更新固件时要保存的文件"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "当<abbr title=\"Unified Configuration Interface\">UCI</abbr>配置提交并生效"
-#~ "后，这些命令将被自动执行。"
-
-#~ msgid ""
-#~ "This is a list of shell glob patterns for matching files and directories "
-#~ "to include during sysupgrade"
-#~ msgstr "系统升级时要保存的配置文件以及目录的串列清单"
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-服务器"
-
-#~ msgid "AHCP Settings"
-#~ msgstr "AHCP设置"
-
-#~ msgid "ARP ping retries"
-#~ msgstr "重试ARP ping"
-
-#~ msgid "ATM Settings"
-#~ msgstr "ATM设置"
-
-#~ msgid "Accept Router Advertisements"
-#~ msgstr "接收路由公告"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "接入点(APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "附加pppd选项"
-
-#~ msgid "Allowed range is 1 to FFFF"
-#~ msgstr "允许范围：1 ~ FFFF"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "自动断开"
-
-#~ msgid "Backup Archive"
-#~ msgstr "备份的存档"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr "本地DNS服务器使用PPP端局提供的域名服务器"
-
-#~ msgid "Connect script"
-#~ msgstr "连接脚本"
-
-#~ msgid "Create backup"
-#~ msgstr "创建备份"
-
-#~ msgid "Default"
-#~ msgstr "默认"
-
-#~ msgid "Disconnect script"
-#~ msgstr "断开脚本"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "修改软件包的同步源和安装地址"
-
-#~ msgid "Enable 4K VLANs"
-#~ msgstr "开启4K VLAN"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "在PPP链路上启用IPv6"
-
-#~ msgid "Firmware image"
-#~ msgstr "固件文件"
-
-#~ msgid "Forward DHCP"
-#~ msgstr "转发DHCP"
-
-#~ msgid "Forward broadcasts"
-#~ msgstr "转发广播"
-
-#~ msgid "HE.net Tunnel ID"
-#~ msgstr "HE.net隧道ID"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr "这里可以备份和恢复路由器的配置，也可以恢复到系统出厂设置。"
-
-#~ msgid "Installation targets"
-#~ msgstr "安装位置"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "保留配置文件"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "保持活动"
-
-#~ msgid "Kernel"
-#~ msgstr "内核"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr "PPP连接成功后替换当前默认路由为pppd"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "PPP连接建立后运行此脚本"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "PPP连接断开前运行此脚本"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr "请确认pin码正确，并且没有锁定sim卡！"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "这些大部分是为设备或网络提供特定服务的，比如shell访问，<abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr> App，网间漫游，发送E-mail等..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr "启动自动重连的失败连接次数"
-
-#~ msgid "Override Gateway"
-#~ msgstr "更新网关"
-
-#~ msgid "PIN code"
-#~ msgstr "PIN码"
-
-#~ msgid "PPP Settings"
-#~ msgstr "PPP设置"
-
-#~ msgid "Package lists"
-#~ msgstr "软件同步源"
-
-#~ msgid ""
-#~ "Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default "
-#~ "VLAN ID added to received untagged frames."
-#~ msgstr ""
-#~ "端口的<abbr title=\"Primary VLAN IDs\">PVID</abbr>指定了添加到所接收的未标"
-#~ "记桢的默认VLAN ID。"
-
-#~ msgid "Port PVIDs on %q"
-#~ msgstr "分配%q的端口PVID"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "放弃所有配置并将路由复位到默认状态？"
-
-#~ msgid "Processor"
-#~ msgstr "处理器"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Radius-端口"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Radius-服务器"
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might loose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "真的要关闭此网络？\n"
-#~ "如果正由此网络管理路由，可能导致无法再管理路由器！"
-
-#~ msgid "Relay Settings"
-#~ msgstr "中继设置"
-
-#~ msgid "Replace default route"
-#~ msgstr "重置默认路由"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "恢复出厂设置"
-
-#~ msgid "Routing table ID"
-#~ msgstr "路由表ID"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr "Modem尝试连接的就绪准备时间"
-
-#~ msgid "Send Router Solicitiations"
-#~ msgstr "发送路由探测"
-
-#~ msgid "Server IPv4-Address"
-#~ msgstr "服务器IPv4-地址"
-
-#~ msgid "Service type"
-#~ msgstr "服务类型"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "路由器上运行的部分任务和服务。"
-
-#~ msgid "Settings"
-#~ msgstr "设置"
-
-#~ msgid "Setup wait time"
-#~ msgstr "设置缓冲时间"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr "抱歉，OpenWrt不支持本平台的系统升级。<br />请手动刷新设备。"
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "指定附加命令行参数到pppd"
-
-#~ msgid "TTL"
-#~ msgstr "TTL"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "modem的设备节点。例如/dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr "自动关闭空闲连接的延迟时间(秒)"
-
-#~ msgid "Time Server (rdate)"
-#~ msgstr "校时服务器(rdate)"
-
-#~ msgid "Tunnel Settings"
-#~ msgstr "隧道设置"
-
-#~ msgid "Update package lists"
-#~ msgstr "更新软件列表"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "上传OpenWrt固件以刷新设备。"
-
-#~ msgid "Upload image"
-#~ msgstr "上传固件"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "使用对等DNS"
-
-#~ msgid "VLAN %d"
-#~ msgstr "VLAN %d"
-
-#~ msgid ""
-#~ "You can specify multiple DNS servers here, press enter to add a new "
-#~ "entry. Servers entered here will override automatically assigned ones."
-#~ msgstr "这里可以指定多路DNS服务器。输入后会自动覆盖已分配的条目。"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "UMTS/GPRS功能需安装\"comgt\",PPPoE需安装\"ppp-mod-pppoe\",PPPoA需安装"
-#~ "\"ppp-mod-pppoa\",PPtP需安装\"pptp\"。"
-
-#~ msgid "back"
-#~ msgstr "后退"
-
-#~ msgid "buffered"
-#~ msgstr "已缓冲"
-
-#~ msgid "cached"
-#~ msgstr "已缓存"
-
-#~ msgid "free"
-#~ msgstr "空闲"
-
-#~ msgid "static"
-#~ msgstr "静态"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一款嵌入式设备使"
-#~ "用的免费Lua软件，包含web框架和web界面。<abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>遵循Apache-License."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-密钥"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr "一个用C语言和Lua实现的服务于LuCI的轻量级 HTTP/1.1 web服务器。"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "一个用于<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的小型web服"
-#~ "务器。"
-
-#~ msgid "About"
-#~ msgstr "关于"
-
-#~ msgid "Active IP Connections"
-#~ msgstr "活动IP连接"
-
-#~ msgid "Addresses"
-#~ msgstr "地址"
-
-#~ msgid "Admin Password"
-#~ msgstr "管理密码"
-
-#~ msgid "Alias"
-#~ msgstr "别名"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "验证范围"
-
-#~ msgid "Bridge Port"
-#~ msgstr "桥接端口"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr "修改管理员密码"
-
-#~ msgid "Client + WDS"
-#~ msgstr "客户端+WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "配置文件"
-
-#~ msgid "Connection timeout"
-#~ msgstr "连接超时"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "特别致谢"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP有效分配"
-
-#~ msgid "Document root"
-#~ msgstr "根文档"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "开启保持活动"
-
-#~ msgid "Enable device"
-#~ msgstr "开启设备"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "以太网桥"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "这里可以粘贴公用<abbr title=\"Secure Shell\">SSH</abbr>密钥以用于<abbr "
-#~ "title=\"Secure Shell\">SSH</abbr>公共密钥认证(每行一个密钥)。"
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "IP设置"
-
-#~ msgid "Interface Status"
-#~ msgstr "接口状态"
-
-#~ msgid "Lead Development"
-#~ msgstr "开发向导"
-
-#~ msgid "Master"
-#~ msgstr "Master"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Master + WDS"
-
-#~ msgid "No address configured on this interface."
-#~ msgstr "本接口未设置地址"
-
-#~ msgid "Not configured"
-#~ msgstr "未设置"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "密码已修改"
-
-#~ msgid "Plugin path"
-#~ msgstr "插件路径"
-
-#~ msgid "Ports"
-#~ msgstr "端口"
-
-#~ msgid "Primary"
-#~ msgstr "主要的"
-
-#~ msgid "Project Homepage"
-#~ msgstr "项目主页"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "伪装Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "感谢"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr "在有提示验证保护的网页时显示验证范围。"
-
-#~ msgid "Unknown Error"
-#~ msgstr "未知错误"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "默认为<code>/etc/httpd.conf</code>"
-
-#~ msgid "Enable this switch"
-#~ msgstr "开启交换机"
-
-#~ msgid "OPKG error code %i"
-#~ msgstr "OPKG 出错代码 %i"
-
-#~ msgid "Package lists updated"
-#~ msgstr "更新软件包列表"
-
-#~ msgid "Reset switch during setup"
-#~ msgstr "设置时复位交换机"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "升级已安装软件"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-端口"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一个免费的，灵活"
-#~ "的，可视化的用户界面，可用来配置OpenWrt。"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "AP隔离"
-
-#~ msgid "Active IPv4-Routes"
-#~ msgstr "活动的IPv4链路"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "添加域名条目到主机解析文件"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "添加无线网络到物理网络"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr "这里显示了系统日志，可以了解系统当前的运行状态。"
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "现在开始体验路由带来的乐趣吧!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr "我们一直在努力提升界面效果，并期待着您的意见与建议。"
-
-#~ msgid "Attach to existing network"
-#~ msgstr "连接现有网络"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "固定段大小"
-
-#~ msgid "Configuration applied"
-#~ msgstr "设置已应用"
-
-#~ msgid "Create Or Attach Network"
-#~ msgstr "创建/连接 网络"
-
-#~ msgid "Devices"
-#~ msgstr "设备"
-
-#~ msgid "enable"
-#~ msgstr "启用"
-
-#~ msgid "Errors"
-#~ msgstr "错误"
-
-#~ msgid "Essentials"
-#~ msgstr "概要"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr "修复某些ISP的不可达网站或其他未知错误"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "过滤无用的<abbr title=\"Domain Name System\">DNS</abbr>Windows-systems查询"
-
-#~ msgid "Hardware Address"
-#~ msgstr "硬件地址"
-
-#~ msgid "Hello!"
-#~ msgstr "Hello!"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "这里可以配置已安装的无线设备。"
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "这里可以查看系统当前的状态信息，比如<abbr title=\"Central Processing Unit"
-#~ "\">CPU</abbr>频率、内存使用率或网络链接数据。"
-
-#~ msgid ""
-#~ "If the interface is attached to an existing network it will be "
-#~ "<em>bridged</em> to the existing interfaces and is covered by the "
-#~ "firewall zone of the choosen network.<br />Uncheck the attach option to "
-#~ "define a new standalone network for this interface."
-#~ msgstr ""
-#~ "如果连接在已有网络，那么它会被<em>桥接</em>到现有接口，并且被所选的防火墙"
-#~ "区域覆盖。取消附加选项可以重定义此接口为新的独立网络。"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "独立(点对点Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "网络连接"
-
-#~ msgid "Join (Client)"
-#~ msgstr "加入(客户端)"
-
-#~ msgid "Leases"
-#~ msgstr "租约"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "根据子网本地化主机名"
-
-#~ msgid "LuCI Components"
-#~ msgstr "LuCI 组件"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save & Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "注意：在<abbr title=\"Lua Configuration Interface\">LuCI</abbr>中，点击 保"
-#~ "存&应用 后设置才会生效。"
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr "本页可以设置路由器的重要参数。"
-
-#~ msgid "Perform Actions"
-#~ msgstr "执行操作"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr "阻止缓存无效的<abbr title=\"Domain Name System\">DNS</abbr>应答"
-
-#~ msgid "Prevents client to client communication"
-#~ msgstr "禁止客户端间的通信"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "添加(接入点)"
-
-#~ msgid "Search file..."
-#~ msgstr "查找文件..."
-
-#~ msgid "Server"
-#~ msgstr "服务器"
-
-#~ msgid "TX / RX"
-#~ msgstr "发送 / 接收"
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>开发团队"
-
-#~ msgid "The following changes have been comitted"
-#~ msgstr "以下更改已提交"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "以下更改已生效"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "这是<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的管理页面。"
-
-#~ msgid "transmitted / received"
-#~ msgstr "已传输 / 已接收"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "当刷写带<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的新固件"
-#~ "时，这些文件将被加入到新的固件中。"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "用户可以通过<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-#~ "abbr>自动接收网络的(<abbr title=\"Internet Protocol\">IP</abbr>地址，子网"
-#~ "掩码，<abbr title=\"Domain Name System\">DNS</abbr>服务器, ...)等配置信"
-#~ "息。"
-
-#~ msgid "Wireless Scan"
-#~ msgstr "搜索无线"
-
-#~ msgid ""
-#~ "You are about to join the wireless network <em><strong>%s</strong></em>. "
-#~ "In order to complete the process, you need to provide some additional "
-#~ "details."
-#~ msgstr ""
-#~ "即将加入无线网络<em><strong>%s</strong></em>，这需要填写一些额外信息。"
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "一台设备可以用虚拟方式同时运行几个无线网络。但注意会有硬件或软件限制。通常"
-#~ "可以运行一个点对点无线网络，或同时运行三个Master模式和一个客户端模式的无线"
-#~ "网络。"
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr "需要安装\"ppp-mod-pppoe\"以支持PPPoe，\"pptp\"以支持PPtP"
-
-#~ msgid ""
-#~ "You need to install <a href='%s'><em>wpa-supplicant</em></a> to use WPA!"
-#~ msgstr "需要安装<a href='%s'><em>wpa-supplicant</em></a>以支持WPA加密!"
-
-#~ msgid ""
-#~ "You need to install the <a href='%s'>Broadcom <em>nas</em> supplicant</a> "
-#~ "to use WPA!"
-#~ msgstr ""
-#~ "需要安装<a href='%s'>Broadcom<em>nas</em> supplicant</a>以支持WPA加密!"
-
-#~ msgid "User Interface"
-#~ msgstr "用户界面"
-
-#~ msgid "(hidden)"
-#~ msgstr "(隐藏)"
-
-#~ msgid "(optional)"
-#~ msgstr "(任意)"
-
-#~ msgid "Aliases"
-#~ msgstr "别名"
-
-#~ msgid "First leased address"
-#~ msgstr "起始分配地址"
-
-#~ msgid "Local Network"
-#~ msgstr "本地网络"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "地址租用数"
-
-#~ msgid "Resolvfile"
-#~ msgstr "解析文件"
-
-#~ msgid "Zone"
-#~ msgstr "区域"
-
-#~ msgid "additional hostfile"
-#~ msgstr "附加的主机文件"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "自动重连"
-
-#~ msgid "concurrent queries"
-#~ msgstr "并发查询"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "空闲自动断开"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "不缓存未知数据"
-
-#~ msgid "installed"
-#~ msgstr "已安装"
-
-#~ msgid "manual"
-#~ msgstr "手册"
-
-#~ msgid "not installed"
-#~ msgstr "未安装"
-
-#~ msgid "query port"
-#~ msgstr "查询端口"
-
-#~ msgid "all"
-#~ msgstr "全部"
-
-#~ msgid "Code"
-#~ msgstr "代码"
-
-#~ msgid "Distance"
-#~ msgstr "距离"
-
-#~ msgid "Legend"
-#~ msgstr "图例"
+#~ msgid "An additional network will be created if you leave this unchecked."
+#~ msgstr "取消选中将会另外创建一个新网络，而不会覆盖当前网络设置"
-#~ msgid "Library"
-#~ msgstr "Library"
+#~ msgid "Join Network: Settings"
+#~ msgstr "加入网络:设置"
-#~ msgid "see '%s' manpage"
-#~ msgstr "详参 '%s' 联机帮助"
+#~ msgid "CPU"
+#~ msgstr "CPU"
-#~ msgid "Package Manager"
-#~ msgstr "软件包管理"
+#~ msgid "Port %d"
+#~ msgstr "端口 %d"
-#~ msgid "Service"
-#~ msgstr "服务"
+#~ msgid "Port %d is untagged in multiple VLANs!"
+#~ msgstr "端口 %d 在多个VLAN中均未关联！"
-#~ msgid "Statistics"
-#~ msgstr "统计信息"
+#~ msgid "VLAN Interface"
+#~ msgstr "VLAN接口"
projects / project / luci.git / blobdiff