"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-12-21 23:08+0200\n"
-"PO-Revision-Date: 2015-04-23 13:49+0800\n"
+"PO-Revision-Date: 2015-12-20 13:14+0800\n"
"Last-Translator: GuoGuo <gch981213@gmail.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Poedit 1.7.5\n"
+"X-Generator: Poedit 1.8.5\n"
+"Language-Team: \n"
msgid "(%d minute window, %d second interval)"
msgstr "(%d分钟信息，%d秒刷新)"
msgid "Announced DNS servers"
msgstr "广播的DNS服务器"
+msgid "Anonymous Mount"
+msgstr "自动挂载未配置的磁盘分区"
+
+msgid "Anonymous Swap"
+msgstr "自动挂载未配置的Swap分区"
+
msgid "Antenna 1"
msgstr "天线 1"
msgid "Automatic Homenet (HNCP)"
msgstr "自动家庭网络(HNCP)"
+msgid "Automatically check filesystem for errors before mounting"
+msgstr "在挂载前自动检查文件系统错误"
+
+msgid "Automatically mount filesystems on hotplug"
+msgstr "通过hotplug自动挂载磁盘"
+
+msgid "Automatically mount swap on hotplug"
+msgstr "通过hotplug自动挂载Swap分区"
+
+msgid "Automount Filesystem"
+msgstr "自动挂载磁盘"
+
+msgid "Automount Swap"
+msgstr "自动挂载Swap"
+
msgid "Available"
msgstr "可用"
msgid ""
"Build/distribution specific feed definitions. This file will NOT be "
"preserved in any sysupgrade."
-msgstr ""
+msgstr "由固件指定的软件源。此处的设置在任何系统升级中都不会被保留。"
msgid "Buttons"
msgstr "按键"
msgid "Check"
msgstr "检查"
+msgid "Check fileystems before mount"
+msgstr "在挂载前检查文件系统"
+
msgid "Checksum"
msgstr "校验值"
"Custom feed definitions, e.g. private feeds. This file can be preserved in a "
"sysupgrade."
msgstr ""
+"自定义的软件源地址（例如私有的软件源）。此处设定的源地址在系统升级时将被保留"
msgid "Custom feeds"
-msgstr ""
+msgstr "自定义的软件源"
msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
msgid "Delete"
msgstr "删除"
-msgid "Delete this interface"
-msgstr "删除此接口"
-
msgid "Delete this network"
msgstr "删除此网络"
msgstr "设备配置"
msgid "Device is rebooting..."
-msgstr ""
+msgstr "设备正在重启..."
msgid "Device unreachable"
-msgstr ""
+msgstr "无法连接到设备"
msgid "Diagnostics"
msgstr "网络诊断"
msgstr "最远客户端的距离(米)。"
msgid "Distribution feeds"
-msgstr ""
+msgstr "发行版软件源"
msgid "Diversity"
msgstr "分集"
msgid ""
"Edit the raw configuration data above to fix any error and hit \"Save\" to "
"reload the page."
-msgstr ""
+msgstr "编辑上方的原始配置以修复错误并按下“保存”按钮以重新载入此页面。"
msgid "Edit this interface"
msgstr "修改此接口"
msgid "Enable HE.net dynamic endpoint update"
msgstr "启用HE.net动态终端更新"
+msgid "Enable IPv6 negotiation on the PPP link"
+msgstr "在PPP链路上启用IPv6协商"
+
msgid "Enable Jumbo Frame passthrough"
msgstr "启用巨型帧透传"
msgid "External system log server port"
msgstr "远程log服务器端口"
+msgid "Extra SSH command options"
+msgstr "额外的SSH命令选项"
+
msgid "Fast Frames"
msgstr "快速帧"
msgid "Filter useless"
msgstr "过滤无用包"
+msgid ""
+"Find all currently attached filesystems and swap and replace configuration "
+"with defaults based on what was detected"
+msgstr ""
+"查找所有当前系统上的分区和Swap并使用基于所找到的分区生成的配置文件替换默认配"
+"置。"
+
msgid "Find and join network"
msgstr "搜索并加入网络"
msgid "Fixed source port for outbound DNS queries"
msgstr "指定的DNS查询源端口"
-msgid "Flags"
-msgstr "标识"
-
msgid "Flash Firmware"
msgstr "刷新固件"
msgstr "基本设置"
msgid "General options for opkg"
-msgstr ""
+msgstr "opkg基础配置"
+
+msgid "Generate Config"
+msgstr "生成配置"
msgid "Generate archive"
msgstr "生成备份"
msgid "Given password confirmation did not match, password not changed!"
msgstr "由于密码验证不匹配，密码没有更改！"
+msgid "Global Settings"
+msgstr "全局设置"
+
msgid "Global network options"
msgstr "全局网络选项"
msgstr "仅IPv4"
msgid "IPv4 prefix"
-msgstr ""
+msgstr "IPv4地址前缀"
msgid "IPv4 prefix length"
msgstr "IPv4地址前缀长度"
"requests to"
msgstr "将指定的域名DNS解析转发到指定的DNS服务器（按照示例填写）"
+msgid "List of SSH key files for auth"
+msgstr ""
+
msgid "List of domains to allow RFC1918 responses for"
msgstr "允许RFC1918响应的域名列表"
msgid "Loading"
msgstr "加载中"
+msgid "Local IP address to assign"
+msgstr ""
+
msgid "Local IPv4 address"
msgstr "本地IPv4地址"
msgid "Maximum hold time"
msgstr "最大持续时间"
+msgid ""
+"Maximum length of the name is 15 characters including the automatic protocol/"
+"bridge prefix (br-, 6in4-, pppoe- etc.)"
+msgstr ""
+
msgid "Maximum number of leased addresses."
msgstr "最大地址分配数量。"
"filesystem"
msgstr "配置存储设备挂载到文件系统中的位置和参数。"
+msgid "Mount filesystems not specifically configured"
+msgstr "自动挂载未专门配置挂载点的分区"
+
msgid "Mount options"
msgstr "挂载选项"
msgid "Mount point"
msgstr "挂载点"
+msgid "Mount swap not specifically configured"
+msgstr "自动挂载未专门配置的Swap分区"
+
msgid "Mounted file systems"
msgstr "已挂载的文件系统"
msgid "Note: Configuration files will be erased."
msgstr "注意：配置文件将被删除。"
+msgid "Note: interface name length"
+msgstr ""
+
msgid "Notice"
msgstr "注意"
msgid "PPPoE"
msgstr "PPPoE"
+msgid "PPPoSSH"
+msgstr ""
+
msgid "PPtP"
msgstr "PPtP"
msgid "Peak:"
msgstr "峰值:"
+msgid "Peer IP address to assign"
+msgstr ""
+
msgid "Perform reboot"
msgstr "执行重启"
msgstr "重启中..."
msgid "Reboots the operating system of your device"
-msgstr "重启OpenWrt"
+msgstr "重启您设备上的系统"
msgid "Receive"
msgstr "接收"
"can be reached."
msgstr "路由表描述了数据包的可达路径。"
-msgid "Rule #"
-msgstr "规则 #"
-
msgid "Run a filesystem check before mounting the device"
msgstr "挂载设备前运行文件系统检查"
msgid "SSH Access"
msgstr "SSH访问"
+msgid "SSH server address"
+msgstr "SSH服务器地址"
+
+msgid "SSH server port"
+msgstr "SSH服务器端口"
+
+msgid "SSH username"
+msgstr "SSH用户名"
+
msgid "SSH-Keys"
msgstr "SSH-密钥"
msgid "Sorry, the server encountered an unexpected error."
msgstr "对不起，服务器遇到未知错误。"
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
"flashed manually. Please refer to the OpenWrt wiki for device specific "
"install instructions."
msgstr ""
-"抱歉，当前系统不支持sysupgrade升级，需手动刷新固件。请参考OpenWrt Wiki中此设"
-"备特定的安装向导。"
+"抱歉，您的设备暂不支持sysupgrade升级，需手动更新固件。请参考OpenWrt Wiki中关"
+"于此设备的固件更新说明。"
msgid "Sort"
msgstr "排序"
"code>"
msgid "The configuration file could not be loaded due to the following error:"
-msgstr ""
+msgstr "由于以下错误，配置文件无法被加载："
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"when finished."
msgstr "系统正在删除配置分区，完成后会自动重启。"
-#, fuzzy
msgid ""
"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
"few minutes before you try to reconnect. It might be necessary to renew the "
"address of your computer to reach the device again, depending on your "
"settings."
msgstr ""
-"æ£å\9c¨å\88·æ\96°ç³»ç»\9f...<br />å\88\87å\8b¿å\85³é\97ç\94µæº\90! DO NOT POWER OFF THE DEVICE!<br />ç¨\8dç\89数分"
-"é\92\9få\8d³å\8f¯é\87\8dæ\96°è¿\9eæ\8e¥å\88°è·¯ç\94±ã\80\82可能需要更改计算机的IP地址以重新连接。"
+"æ£å\9c¨å\88·æ\96°ç³»ç»\9f...<br />å\88\87å\8b¿å\85³é\97ç\94µæº\90! DO NOT POWER OFF THE DEVICE!<br />ç\89å¾\85数分"
+"é\92\9få\90\8eå\8d³å\8f¯å°\9dè¯\95é\87\8dæ\96°è¿\9eæ\8e¥å\88°è·¯ç\94±ã\80\82æ\82¨可能需要更改计算机的IP地址以重新连接。"
msgid ""
"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
msgid "Unmanaged"
msgstr "不配置协议"
+msgid "Unmount"
+msgstr "卸载分区"
+
msgid "Unsaved Changes"
msgstr "未保存的配置"
msgstr "正在执行命令..."
msgid "Waiting for device..."
-msgstr ""
+msgstr "等待设备..."
msgid "Warning"
msgstr "警告"
msgid "Warning: There are unsaved changes that will get lost on reboot!"
-msgstr ""
+msgstr "警告：有一些未保存的配置将在重启后丢失！"
msgid "Whether to create an IPv6 default route over the tunnel"
msgstr ""
msgid "« Back"
msgstr "« 后退"
-#~ msgid "Enable IPv6 negotiation on the PPP link"
-#~ msgstr "在PPP链路上启用IPv6协商"
+#~ msgid "Delete this interface"
+#~ msgstr "删除此接口"
+
+#~ msgid "Flags"
+#~ msgstr "标识"
+
+#~ msgid "Rule #"
+#~ msgstr "规则 #"
#~ msgid "Ignore Hosts files"
#~ msgstr "忽略HOSTS文件"
projects / project / luci.git / blobdiff