-#~ msgid "Enable IPv6 negotiation on the PPP link"
-#~ msgstr "在PPP链路上启用IPv6协商"
-
-#~ msgid "Ignore Hosts files"
-#~ msgstr "忽略HOSTS文件"
-
-#~ msgid "Path"
-#~ msgstr "路径"
-
-#~ msgid "Please wait: Device rebooting..."
-#~ msgstr "请稍等：设备重启中..."
-
-#~ msgid ""
-#~ "Warning: There are unsaved changes that will be lost while rebooting!"
-#~ msgstr "警告: 有尚未保存的更改，重启将丢失!"
-
-#~ msgid "CPU frequency"
-#~ msgstr "CPU 频率"
-
-#~ msgid "Chip Model"
-#~ msgstr "芯片型号"
-
-#~ msgid ""
-#~ "Always use 40MHz channels even if the secondary channel overlaps. Using "
-#~ "this option does not comply with IEEE 802.11n-2009!"
-#~ msgstr "强制启用40MHz频宽并忽略辅助信道重叠。此选项不兼容IEEE 802.11n-2009!"
-
-#~ msgid "Cached"
-#~ msgstr "已缓存"
-
-#~ msgid "Configures this mount as overlay storage for block-extroot"
-#~ msgstr "设置挂载为extroot"
-
-#~ msgid "Force 40MHz mode"
-#~ msgstr "强制40MHz频宽"
-
-#~ msgid "Frequency Hopping"
-#~ msgstr "跳频"
-
-#~ msgid "Locked to channel %d used by %s"
-#~ msgstr "信道已锁定为:%d ；源于:%s "
-
-#~ msgid "Use as root filesystem"
-#~ msgstr "设置为根文件系统"
-
-#~ msgid "Ad-hoc mode"
-#~ msgstr "Ad-hoc模式"
-
-#~ msgid "HE.net user ID"
-#~ msgstr "HE.net用户ID"
-
-#~ msgid "This is the 32 byte hex encoded user ID, not the login name"
-#~ msgstr "这是32 byte hex编码的用户ID，不是登录名"
-
-#~ msgid "40MHz 2nd channel above"
-#~ msgstr "40MHz HT40+ (仅1-7频道可用）"
-
-#~ msgid "40MHz 2nd channel below"
-#~ msgstr "40MHz HT40- (仅5-13频道可用）"
-
-#~ msgid "Accept router advertisements"
-#~ msgstr "接收路由通告"
-
-#~ msgid "Advertise IPv6 on network"
-#~ msgstr "在网络上通告IPv6"
-
-#~ msgid "Advertised network ID"
-#~ msgstr "通告的网络ID"
-
-#~ msgid "Allowed range is 1 to 65535"
-#~ msgstr "允许的范围：1 到 65535"
-
-#~ msgid "HT capabilities"
-#~ msgstr "HT功能"
-
-#~ msgid "HT mode"
-#~ msgstr "HT模式"
-
-#~ msgid "Router Model"
-#~ msgstr "主机型号"
-
-#~ msgid "Router Name"
-#~ msgstr "系统名称"
-
-#~ msgid "Send router solicitations"
-#~ msgstr "发送路由请求"
-
-#~ msgid "Specifies the advertised preferred prefix lifetime in seconds"
-#~ msgstr "指定通告的首选前缀生存时间(秒)"
-
-#~ msgid "Specifies the advertised valid prefix lifetime in seconds"
-#~ msgstr "指定通告的有效前缀生存时间(秒)"
-
-#~ msgid "Use preferred lifetime"
-#~ msgstr "使用首选生存时间"
-
-#~ msgid "Use valid lifetime"
-#~ msgstr "使用有效生存时间"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "等待路由器..."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "开启内置NTP服务器"
-
-#~ msgid "Active Leases"
-#~ msgstr "活动的租约"
-
-#~ msgid "Open"
-#~ msgstr "打开"
-
-#~ msgid "KB"
-#~ msgstr "KB"
-
-#~ msgid "Bit Rate"
-#~ msgstr "比特率"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "设置 /应用"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "设置 / 修改"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "设置 / 重置"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "MAC地址"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encrypted\">加密</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "搜索<abbr title=\"Wireless Local Area Network\">WLAN</abbr>"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "请选择你需要链接到无线网络接口的网络. 如果不链接到任何网络请选择 <em>未指"
-#~ "定</em>,如果需要创建新网络请点<em>创建</em>."
-
-#~ msgid "Create Network"
-#~ msgstr "创建一个网络"
-
-#~ msgid "Link"
-#~ msgstr "链接"
-
-#~ msgid "Networks"
-#~ msgstr "网络"
-
-#~ msgid "Power"
-#~ msgstr "Power"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "扫描到的无线热点"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-服务器"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-广播"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-地址"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "IP-Aliases"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "IPv6 设置"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "注意：当你选择一个已经存在与一个网络中的接口时，它将会被移除那个网络。"
-
-#~ msgid ""
-#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
-#~ "lose access to this router if you are connected via this interface."
-#~ msgstr ""
-#~ "Really delete this interface? The deletion cannot be undone!\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "interface."
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "network."
-
-#~ msgid ""
-#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
-#~ "if you are connected via this interface."
-#~ msgstr ""
-#~ "Really shutdown interface \"%s\" ?\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "interface."
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might lose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "Really shutdown network ?\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "interface."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "本设备可以划分为多个<abbr title=\"Virtual Local Area Network\">VLAN</"
-#~ "abbr>，并支持电脑间的直接通讯；<abbr title=\"Virtual Local Area Network"
-#~ "\">VLAN</abbr>也常用于分割不同网段；默认通常是一条上传端口连接ISP，其余端"
-#~ "口为本地子网。"
-
-#~ msgid "Enable buffering"
-#~ msgstr "开启缓冲"
-
-#~ msgid "IPv6-over-IPv4"
-#~ msgstr "IPv6-over-IPv4"
-
-#~ msgid "Custom Files"
-#~ msgstr "自定义文件"
-
-#~ msgid "Custom files"
-#~ msgstr "自定义文件"
-
-#~ msgid "Detected Files"
-#~ msgstr "查询到的文件"
-
-#~ msgid "Detected files"
-#~ msgstr "查询到的文件"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "更新固件时被保存的文件"
-
-#~ msgid "General"
-#~ msgstr "基本信息"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "这里可以自定义<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的组"
-#~ "件和功能。"
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Post-commit操作"
-
-#~ msgid ""
-#~ "The following files are detected by the system and will be kept "
-#~ "automatically during sysupgrade"
-#~ msgstr "更新固件时要保存的文件"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "当<abbr title=\"Unified Configuration Interface\">UCI</abbr>配置提交并生效"
-#~ "后，这些命令将被自动执行。"
-
-#~ msgid ""
-#~ "This is a list of shell glob patterns for matching files and directories "
-#~ "to include during sysupgrade"
-#~ msgstr "系统升级时要保存的配置文件以及目录的串列清单"
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-服务器"
-
-#~ msgid "AHCP Settings"
-#~ msgstr "AHCP设置"
-
-#~ msgid "ARP ping retries"
-#~ msgstr "重试ARP ping"
-
-#~ msgid "ATM Settings"
-#~ msgstr "ATM设置"
-
-#~ msgid "Accept Router Advertisements"
-#~ msgstr "接收路由公告"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "接入点(APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "附加pppd选项"
-
-#~ msgid "Allowed range is 1 to FFFF"
-#~ msgstr "允许范围：1 ~ FFFF"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "自动断开"
-
-#~ msgid "Backup Archive"
-#~ msgstr "备份的存档"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr "本地DNS服务器使用PPP端局提供的域名服务器"
-
-#~ msgid "Connect script"
-#~ msgstr "连接脚本"
-
-#~ msgid "Create backup"
-#~ msgstr "创建备份"
-
-#~ msgid "Default"
-#~ msgstr "默认"
-
-#~ msgid "Disconnect script"
-#~ msgstr "断开脚本"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "修改软件包的同步源和安装地址"
-
-#~ msgid "Enable 4K VLANs"
-#~ msgstr "开启4K VLAN"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "在PPP链路上启用IPv6"
-
-#~ msgid "Firmware image"
-#~ msgstr "固件文件"
-
-#~ msgid "Forward DHCP"
-#~ msgstr "转发DHCP"
-
-#~ msgid "Forward broadcasts"
-#~ msgstr "转发广播"
-
-#~ msgid "HE.net Tunnel ID"
-#~ msgstr "HE.net隧道ID"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr "这里可以备份和恢复路由器的配置，也可以恢复到系统出厂设置。"
-
-#~ msgid "Installation targets"
-#~ msgstr "安装位置"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "保留配置文件"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "保持活动"
-
-#~ msgid "Kernel"
-#~ msgstr "内核"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr "PPP连接成功后替换当前默认路由为pppd"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "PPP连接建立后运行此脚本"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "PPP连接断开前运行此脚本"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr "请确认pin码正确，并且没有锁定sim卡！"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "这些大部分是为设备或网络提供特定服务的，比如shell访问，<abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr> App，网间漫游，发送E-mail等..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr "启动自动重连的失败连接次数"
-
-#~ msgid "Override Gateway"
-#~ msgstr "更新网关"
-
-#~ msgid "PIN code"
-#~ msgstr "PIN码"
-
-#~ msgid "PPP Settings"
-#~ msgstr "PPP设置"
-
-#~ msgid "Package lists"
-#~ msgstr "软件同步源"
-
-#~ msgid ""
-#~ "Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default "
-#~ "VLAN ID added to received untagged frames."
-#~ msgstr ""
-#~ "端口的<abbr title=\"Primary VLAN IDs\">PVID</abbr>指定了添加到所接收的未标"
-#~ "记桢的默认VLAN ID。"
-
-#~ msgid "Port PVIDs on %q"
-#~ msgstr "分配%q的端口PVID"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "放弃所有配置并将路由复位到默认状态？"
-
-#~ msgid "Processor"
-#~ msgstr "处理器"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Radius-端口"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Radius-服务器"
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might loose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "真的要关闭此网络？\n"
-#~ "如果正由此网络管理路由，可能导致无法再管理路由器！"
-
-#~ msgid "Relay Settings"
-#~ msgstr "中继设置"
-
-#~ msgid "Replace default route"
-#~ msgstr "重置默认路由"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "恢复出厂设置"
-
-#~ msgid "Routing table ID"
-#~ msgstr "路由表ID"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr "Modem尝试连接的就绪准备时间"
-
-#~ msgid "Send Router Solicitiations"
-#~ msgstr "发送路由探测"
-
-#~ msgid "Server IPv4-Address"
-#~ msgstr "服务器IPv4-地址"
-
-#~ msgid "Service type"
-#~ msgstr "服务类型"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "路由器上运行的部分任务和服务。"
-
-#~ msgid "Settings"
-#~ msgstr "设置"
-
-#~ msgid "Setup wait time"
-#~ msgstr "设置缓冲时间"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr "抱歉，OpenWrt不支持本平台的系统升级。<br />请手动刷新设备。"
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "指定附加命令行参数到pppd"
-
-#~ msgid "TTL"
-#~ msgstr "TTL"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "modem的设备节点。例如/dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr "自动关闭空闲连接的延迟时间(秒)"
-
-#~ msgid "Time Server (rdate)"
-#~ msgstr "校时服务器(rdate)"
-
-#~ msgid "Tunnel Settings"
-#~ msgstr "隧道设置"
-
-#~ msgid "Update package lists"
-#~ msgstr "更新软件列表"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "上传OpenWrt固件以刷新设备。"
-
-#~ msgid "Upload image"
-#~ msgstr "上传固件"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "使用对等DNS"
-
-#~ msgid "VLAN %d"
-#~ msgstr "VLAN %d"
-
-#~ msgid ""
-#~ "You can specify multiple DNS servers here, press enter to add a new "
-#~ "entry. Servers entered here will override automatically assigned ones."
-#~ msgstr "这里可以指定多路DNS服务器。输入后会自动覆盖已分配的条目。"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "UMTS/GPRS功能需安装\"comgt\",PPPoE需安装\"ppp-mod-pppoe\",PPPoA需安装"
-#~ "\"ppp-mod-pppoa\",PPtP需安装\"pptp\"。"
-
-#~ msgid "back"
-#~ msgstr "后退"
-
-#~ msgid "buffered"
-#~ msgstr "已缓冲"
-
-#~ msgid "cached"
-#~ msgstr "已缓存"
-
-#~ msgid "free"
-#~ msgstr "空闲"
-
-#~ msgid "static"
-#~ msgstr "静态"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一款嵌入式设备使"
-#~ "用的免费Lua软件，包含web框架和web界面。<abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>遵循Apache-License."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-密钥"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr "一个用C语言和Lua实现的服务于LuCI的轻量级 HTTP/1.1 web服务器。"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "一个用于<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的小型web服"
-#~ "务器。"
-
-#~ msgid "About"
-#~ msgstr "关于"
-
-#~ msgid "Active IP Connections"
-#~ msgstr "活动IP连接"
-
-#~ msgid "Addresses"
-#~ msgstr "地址"
-
-#~ msgid "Admin Password"
-#~ msgstr "管理密码"
-
-#~ msgid "Alias"
-#~ msgstr "别名"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "验证范围"
-
-#~ msgid "Bridge Port"
-#~ msgstr "桥接端口"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr "修改管理员密码"
-
-#~ msgid "Client + WDS"
-#~ msgstr "客户端+WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "配置文件"
-
-#~ msgid "Connection timeout"
-#~ msgstr "连接超时"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "特别致谢"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP有效分配"
-
-#~ msgid "Document root"
-#~ msgstr "根文档"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "开启保持活动"
-
-#~ msgid "Enable device"
-#~ msgstr "开启设备"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "以太网桥"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "这里可以粘贴公用<abbr title=\"Secure Shell\">SSH</abbr>密钥以用于<abbr "
-#~ "title=\"Secure Shell\">SSH</abbr>公共密钥认证(每行一个密钥)。"
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "IP设置"
-
-#~ msgid "Interface Status"
-#~ msgstr "接口状态"
-
-#~ msgid "Lead Development"
-#~ msgstr "开发向导"
-
-#~ msgid "Master"
-#~ msgstr "Master"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Master + WDS"
-
-#~ msgid "No address configured on this interface."
-#~ msgstr "本接口未设置地址"
-
-#~ msgid "Not configured"
-#~ msgstr "未设置"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "密码已修改"
-
-#~ msgid "Plugin path"
-#~ msgstr "插件路径"
-
-#~ msgid "Ports"
-#~ msgstr "端口"
-
-#~ msgid "Primary"
-#~ msgstr "主要的"
-
-#~ msgid "Project Homepage"
-#~ msgstr "项目主页"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "伪装Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "感谢"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr "在有提示验证保护的网页时显示验证范围。"
-
-#~ msgid "Unknown Error"
-#~ msgstr "未知错误"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "默认为<code>/etc/httpd.conf</code>"
-
-#~ msgid "Enable this switch"
-#~ msgstr "开启交换机"
-
-#~ msgid "OPKG error code %i"
-#~ msgstr "OPKG 出错代码 %i"
-
-#~ msgid "Package lists updated"
-#~ msgstr "更新软件包列表"
-
-#~ msgid "Reset switch during setup"
-#~ msgstr "设置时复位交换机"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "升级已安装软件"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-端口"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一个免费的，灵活"
-#~ "的，可视化的用户界面，可用来配置OpenWrt。"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "AP隔离"
-
-#~ msgid "Active IPv4-Routes"
-#~ msgstr "活动的IPv4链路"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "添加域名条目到主机解析文件"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "添加无线网络到物理网络"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr "这里显示了系统日志，可以了解系统当前的运行状态。"
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "现在开始体验路由带来的乐趣吧!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr "我们一直在努力提升界面效果，并期待着您的意见与建议。"
-
-#~ msgid "Attach to existing network"
-#~ msgstr "连接现有网络"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "固定段大小"
-
-#~ msgid "Configuration applied"
-#~ msgstr "设置已应用"
-
-#~ msgid "Create Or Attach Network"
-#~ msgstr "创建/连接 网络"
-
-#~ msgid "Devices"
-#~ msgstr "设备"
-
-#~ msgid "enable"
-#~ msgstr "启用"
-
-#~ msgid "Errors"
-#~ msgstr "错误"
-
-#~ msgid "Essentials"
-#~ msgstr "概要"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr "修复某些ISP的不可达网站或其他未知错误"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "过滤无用的<abbr title=\"Domain Name System\">DNS</abbr>Windows-systems查询"
-
-#~ msgid "Hardware Address"
-#~ msgstr "硬件地址"
-
-#~ msgid "Hello!"
-#~ msgstr "Hello!"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "这里可以配置已安装的无线设备。"
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "这里可以查看系统当前的状态信息，比如<abbr title=\"Central Processing Unit"
-#~ "\">CPU</abbr>频率、内存使用率或网络链接数据。"
-
-#~ msgid ""
-#~ "If the interface is attached to an existing network it will be "
-#~ "<em>bridged</em> to the existing interfaces and is covered by the "
-#~ "firewall zone of the choosen network.<br />Uncheck the attach option to "
-#~ "define a new standalone network for this interface."
-#~ msgstr ""
-#~ "如果连接在已有网络，那么它会被<em>桥接</em>到现有接口，并且被所选的防火墙"
-#~ "区域覆盖。取消附加选项可以重定义此接口为新的独立网络。"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "独立(点对点Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "网络连接"
-
-#~ msgid "Join (Client)"
-#~ msgstr "加入(客户端)"
-
-#~ msgid "Leases"
-#~ msgstr "租约"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "根据子网本地化主机名"
-
-#~ msgid "LuCI Components"
-#~ msgstr "LuCI 组件"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save & Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "注意：在<abbr title=\"Lua Configuration Interface\">LuCI</abbr>中，点击 保"
-#~ "存&应用 后设置才会生效。"
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr "本页可以设置路由器的重要参数。"
-
-#~ msgid "Perform Actions"
-#~ msgstr "执行操作"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr "阻止缓存无效的<abbr title=\"Domain Name System\">DNS</abbr>应答"
-
-#~ msgid "Prevents client to client communication"
-#~ msgstr "禁止客户端间的通信"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "添加(接入点)"
-
-#~ msgid "Search file..."
-#~ msgstr "查找文件..."
-
-#~ msgid "Server"
-#~ msgstr "服务器"
-
-#~ msgid "TX / RX"
-#~ msgstr "发送 / 接收"
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>开发团队"
-
-#~ msgid "The following changes have been comitted"
-#~ msgstr "以下更改已提交"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "以下更改已生效"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "这是<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的管理页面。"
-
-#~ msgid "transmitted / received"
-#~ msgstr "已传输 / 已接收"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "当刷写带<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的新固件"
-#~ "时，这些文件将被加入到新的固件中。"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "用户可以通过<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-#~ "abbr>自动接收网络的(<abbr title=\"Internet Protocol\">IP</abbr>地址，子网"
-#~ "掩码，<abbr title=\"Domain Name System\">DNS</abbr>服务器, ...)等配置信"
-#~ "息。"
-
-#~ msgid "Wireless Scan"
-#~ msgstr "搜索无线"
-
-#~ msgid ""
-#~ "You are about to join the wireless network <em><strong>%s</strong></em>. "
-#~ "In order to complete the process, you need to provide some additional "
-#~ "details."
-#~ msgstr ""
-#~ "即将加入无线网络<em><strong>%s</strong></em>，这需要填写一些额外信息。"
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "一台设备可以用虚拟方式同时运行几个无线网络。但注意会有硬件或软件限制。通常"
-#~ "可以运行一个点对点无线网络，或同时运行三个Master模式和一个客户端模式的无线"
-#~ "网络。"
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr "需要安装\"ppp-mod-pppoe\"以支持PPPoe，\"pptp\"以支持PPtP"
-
-#~ msgid ""
-#~ "You need to install <a href='%s'><em>wpa-supplicant</em></a> to use WPA!"
-#~ msgstr "需要安装<a href='%s'><em>wpa-supplicant</em></a>以支持WPA加密!"
-
-#~ msgid ""
-#~ "You need to install the <a href='%s'>Broadcom <em>nas</em> supplicant</a> "
-#~ "to use WPA!"
-#~ msgstr ""
-#~ "需要安装<a href='%s'>Broadcom<em>nas</em> supplicant</a>以支持WPA加密!"
-
-#~ msgid "User Interface"
-#~ msgstr "用户界面"
-
-#~ msgid "(hidden)"
-#~ msgstr "(隐藏)"
-
-#~ msgid "(optional)"
-#~ msgstr "(任意)"
-
-#~ msgid "Aliases"
-#~ msgstr "别名"
projects / project / luci.git / blobdiff