"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Pootle 2.0.4\n"
+msgid "%s is untagged in multiple VLANs!"
+msgstr ""
+
msgid "(%d minute window, %d second interval)"
msgstr "(%d minute window, %d second interval)"
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "1 Minute Load:"
msgid "15 Minute Load:"
msgstr "15 Minute Load:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "5 Minute Load:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
msgstr ""
-msgid "ADSL"
+msgid "A43C + J43 + A43"
+msgstr ""
+
+msgid "A43C + J43 + A43 + V43"
msgstr ""
-msgid "ADSL Status"
+msgid "ADSL"
msgstr ""
msgid "AICCU (SIXXS)"
msgstr ""
+msgid "ANSI T1.413"
+msgstr ""
+
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "AR Support"
-
msgid "ARP retry threshold"
msgstr "ARP retry threshold"
+msgid "ATM (Asynchronous Transfer Mode)"
+msgstr ""
+
msgid "ATM Bridges"
msgstr "ATM Bridges"
msgid "ATM device number"
msgstr "ATM device number"
+msgid "ATU-C System Vendor ID"
+msgstr ""
+
msgid "AYIYA"
msgstr ""
msgid "Advanced Settings"
msgstr "Advanced Settings"
+msgid "Aggregate Transmit Power(ACTATP)"
+msgstr ""
+
msgid "Alert"
msgstr "Alert"
+msgid ""
+"Allocate IP addresses sequentially, starting from the lowest available "
+"address"
+msgstr ""
+
+msgid "Allocate IP sequentially"
+msgstr ""
+
msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
msgstr "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
msgstr ""
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "An additional network will be created if you leave this unchecked."
+msgid "Annex"
+msgstr ""
+
+msgid "Annex A + L + M (all)"
+msgstr ""
+
+msgid "Annex A G.992.1"
+msgstr ""
+
+msgid "Annex A G.992.2"
+msgstr ""
+
+msgid "Annex A G.992.3"
+msgstr ""
+
+msgid "Annex A G.992.5"
+msgstr ""
+
+msgid "Annex B (all)"
+msgstr ""
+
+msgid "Annex B G.992.1"
+msgstr ""
+
+msgid "Annex B G.992.3"
+msgstr ""
+
+msgid "Annex B G.992.5"
+msgstr ""
+
+msgid "Annex J (all)"
+msgstr ""
+
+msgid "Annex L G.992.3 POTS 1"
+msgstr ""
+
+msgid "Annex M (all)"
+msgstr ""
+
+msgid "Annex M G.992.3"
+msgstr ""
+
+msgid "Annex M G.992.5"
+msgstr ""
msgid "Announce as default router even if no public prefix is available."
msgstr ""
msgid "Announced DNS servers"
msgstr ""
+msgid "Anonymous Identity"
+msgstr ""
+
+msgid "Anonymous Mount"
+msgstr ""
+
+msgid "Anonymous Swap"
+msgstr ""
+
msgid "Antenna 1"
msgstr "Antenna 1"
msgid "Associated Stations"
msgstr "Associated Stations"
-msgid "Atheros 802.11%s Wireless Controller"
+msgid "Auth Group"
msgstr ""
msgid "AuthGroup"
msgid "Authentication"
msgstr "Authentication"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Authoritative"
msgid "Automatic Homenet (HNCP)"
msgstr ""
+msgid "Automatically check filesystem for errors before mounting"
+msgstr ""
+
+msgid "Automatically mount filesystems on hotplug"
+msgstr ""
+
+msgid "Automatically mount swap on hotplug"
+msgstr ""
+
+msgid "Automount Filesystem"
+msgstr ""
+
+msgid "Automount Swap"
+msgstr ""
+
msgid "Available"
msgstr "Available"
msgid "Average:"
msgstr "Average:"
+msgid "B43 + B43C"
+msgstr ""
+
+msgid "B43 + B43C + V43"
+msgstr ""
+
msgid "BR / DMR / AFTR"
msgstr ""
msgid "Back to scan results"
msgstr "Back to scan results"
-msgid "Background Scan"
-msgstr "Background Scan"
-
msgid "Backup / Flash Firmware"
msgstr "Backup / Flash Firmware"
"configuration files marked by opkg, essential base files and the user "
"defined backup patterns."
+msgid "Bind interface"
+msgstr ""
+
+msgid "Bind only to specific interfaces rather than wildcard address."
+msgstr ""
+
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Bitrate"
msgid "CA certificate; if empty it will be saved after the first connection."
msgstr ""
-msgid "CPU"
-msgstr "CPU"
-
msgid "CPU usage (%)"
msgstr "CPU usage (%)"
msgid "Check"
msgstr "Check"
+msgid "Check fileystems before mount"
+msgstr ""
+
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Checksum"
msgid "Cipher"
msgstr "Cipher"
+msgid "Cisco UDP encapsulation"
+msgstr ""
+
msgid ""
"Click \"Generate archive\" to download a tar archive of the current "
"configuration files. To reset the firmware to its initial state, click "
msgid "Common Configuration"
msgstr "Common Configuration"
-msgid "Compression"
-msgstr "Compression"
-
msgid "Configuration"
msgstr "Configuration"
msgid "DNS-Label / FQDN"
msgstr ""
+msgid "DNSSEC"
+msgstr ""
+
+msgid "DNSSEC check unsigned"
+msgstr ""
+
+msgid "DPD Idle Timeout"
+msgstr ""
+
msgid "DS-Lite AFTR address"
msgstr ""
+msgid "DSL"
+msgstr ""
+
+msgid "DSL Status"
+msgstr ""
+
+msgid "DSL line mode"
+msgstr ""
+
msgid "DUID"
msgstr ""
+msgid "Data Rate"
+msgstr ""
+
msgid "Debug"
msgstr "Debug"
msgid "Default gateway"
msgstr "Default gateway"
+msgid "Default is stateless + stateful"
+msgstr ""
+
msgid "Default route"
msgstr ""
msgid "Delete"
msgstr "Delete"
-msgid "Delete this interface"
-msgstr "Delete this interface"
-
msgid "Delete this network"
msgstr "Delete this network"
msgid "Disable DNS setup"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Disable HW-Beacon timer"
+msgid "Disable Encryption"
+msgstr ""
msgid "Disabled"
msgstr "Disabled"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr ""
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr "Do not send probe responses"
-
msgid "Domain required"
msgstr "Domain required"
msgid "Domain whitelist"
msgstr ""
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr ""
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
+msgid "Enable IPv6 negotiation on the PPP link"
+msgstr ""
+
msgid "Enable Jumbo Frame passthrough"
msgstr ""
msgid "Enable NTP client"
msgstr ""
+msgid "Enable Single DES"
+msgstr ""
+
msgid "Enable TFTP server"
msgstr ""
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Enabled"
msgstr "Enabled"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Enables the Spanning Tree Protocol on this bridge"
msgid "Encryption"
msgstr "Encryption"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr ""
msgid "Error"
msgstr "Error"
+msgid "Errored seconds (ES)"
+msgstr ""
+
msgid "Ethernet Adapter"
msgstr "Ethernet Adapter"
msgid "Ethernet Switch"
msgstr "Ethernet Switch"
+msgid "Exclude interfaces"
+msgstr ""
+
msgid "Expand hosts"
msgstr ""
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr ""
msgid "External system log server port"
msgstr ""
-msgid "Fast Frames"
-msgstr "Fast Frames"
+msgid "External system log server protocol"
+msgstr ""
+
+msgid "Extra SSH command options"
+msgstr ""
msgid "File"
msgstr ""
msgid "Filter useless"
msgstr "Filter useless"
+msgid ""
+"Find all currently attached filesystems and swap and replace configuration "
+"with defaults based on what was detected"
+msgstr ""
+
msgid "Find and join network"
msgstr ""
msgid "Firewall"
msgstr "Firewall"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Firewall Settings"
msgid "Firewall Status"
msgstr "Firewall Status"
+msgid "Firmware File"
+msgstr ""
+
msgid "Firmware Version"
msgstr ""
msgid "Fixed source port for outbound DNS queries"
msgstr ""
-msgid "Flags"
-msgstr "Flags"
-
msgid "Flash Firmware"
msgstr "Flash Firmware"
msgid "Force TKIP and CCMP (AES)"
msgstr ""
+msgid "Force link"
+msgstr ""
+
+msgid "Force use of NAT-T"
+msgstr ""
+
msgid "Form token mismatch"
msgstr ""
msgid "Forward DHCP traffic"
msgstr ""
+msgid "Forward Error Correction Seconds (FECS)"
+msgstr ""
+
msgid "Forward broadcast traffic"
msgstr ""
msgid "Free space"
msgstr ""
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr ""
msgid "General options for opkg"
msgstr ""
+msgid "Generate Config"
+msgstr ""
+
msgid "Generate archive"
msgstr ""
msgid "Given password confirmation did not match, password not changed!"
msgstr ""
+msgid "Global Settings"
+msgstr ""
+
msgid "Global network options"
msgstr ""
msgid "Go to relevant configuration page"
msgstr "Go to relevant configuration page"
+msgid "Group Password"
+msgstr ""
+
msgid "Guest"
msgstr ""
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Handler"
msgid "Hang Up"
msgstr "Hang Up"
+msgid "Header Error Code Errors (HEC)"
+msgstr ""
+
msgid "Heartbeat"
msgstr ""
msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
msgstr "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
+msgid "Host"
+msgstr ""
+
msgid "Host entries"
msgstr "Host entries"
msgid "Hybrid"
msgstr ""
+msgid "IKE DH Group"
+msgstr ""
+
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "IP address"
msgid "IPv4-Address"
msgstr ""
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr ""
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr ""
msgid "Identity"
msgstr "Identity"
+msgid "If checked, 1DES is enaled"
+msgstr ""
+
+msgid "If checked, encryption is disabled"
+msgstr ""
+
msgid ""
"If specified, mount the device by its UUID instead of a fixed device node"
msgstr ""
msgid "Interface is shutting down..."
msgstr ""
+msgid "Interface name"
+msgstr ""
+
msgid "Interface not present or not connected yet."
msgstr ""
"It appears that you try to flash an image that does not fit into the flash "
"memory, please verify the image file!"
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr ""
msgid "Join Network"
msgstr "Join Network"
-msgid "Join Network: Settings"
+msgid "Join Network: Wireless Scan"
msgstr ""
-msgid "Join Network: Wireless Scan"
+msgid "Joining Network: %q"
msgstr ""
msgid "Keep settings"
msgid "Language and Style"
msgstr ""
+msgid "Latency"
+msgstr ""
+
msgid "Leaf"
msgstr ""
+msgid "Lease time"
+msgstr ""
+
msgid "Lease validity time"
msgstr ""
msgid "Limit"
msgstr "Limit"
-msgid "Line Attenuation"
+msgid "Limit DNS service to subnets interfaces on which we are serving DNS."
+msgstr ""
+
+msgid "Limit listening to these interfaces, and loopback."
+msgstr ""
+
+msgid "Line Attenuation (LATN)"
msgstr ""
-msgid "Line Speed"
+msgid "Line Mode"
msgstr ""
msgid "Line State"
msgstr ""
+msgid "Line Uptime"
+msgstr ""
+
msgid "Link On"
msgstr "Link On"
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
+msgid "List of SSH key files for auth"
+msgstr ""
+
msgid "List of domains to allow RFC1918 responses for"
msgstr ""
msgid "List of hosts that supply bogus NX domain results"
msgstr ""
+msgid "Listen Interfaces"
+msgstr ""
+
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Loading"
msgstr ""
+msgid "Local IP address to assign"
+msgstr ""
+
msgid "Local IPv4 address"
msgstr ""
msgid "Local IPv6 address"
msgstr ""
+msgid "Local Service Only"
+msgstr ""
+
msgid "Local Startup"
msgstr ""
msgid "Localise queries"
msgstr "Localise queries"
-msgid "Locked to channel %d used by: %s"
+msgid "Locked to channel %s used by: %s"
msgstr ""
msgid "Log output level"
msgid "Logout"
msgstr "Logout"
+msgid "Loss of Signal Seconds (LOSS)"
+msgstr ""
+
msgid "Lowest leased address as offset from the network address."
msgstr ""
msgid "MB/s"
msgstr ""
+msgid "MD5"
+msgstr ""
+
msgid "MHz"
msgstr ""
msgid "Manual"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Maximum Rate"
+msgid "Max. Attainable Data Rate (ATTNDR)"
+msgstr ""
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Maximum hold time"
msgstr "Maximum hold time"
+msgid ""
+"Maximum length of the name is 15 characters including the automatic protocol/"
+"bridge prefix (br-, 6in4-, pppoe- etc.)"
+msgstr ""
+
msgid "Maximum number of leased addresses."
msgstr ""
msgid "Metric"
msgstr "Metric"
-msgid "Minimum Rate"
-msgstr "Minimum Rate"
-
msgid "Minimum hold time"
msgstr "Minimum hold time"
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Mode"
"Mount Points define at which point a memory device will be attached to the "
"filesystem"
+msgid "Mount filesystems not specifically configured"
+msgstr ""
+
msgid "Mount options"
msgstr ""
msgid "Mount point"
msgstr ""
+msgid "Mount swap not specifically configured"
+msgstr ""
+
msgid "Mounted file systems"
msgstr "Mounted file systems"
msgid "Move up"
msgstr ""
-msgid "Multicast Rate"
-msgstr "Multicast Rate"
-
msgid "Multicast address"
msgstr ""
msgid "NAS ID"
msgstr "NAS ID"
+msgid "NAT-T Mode"
+msgstr ""
+
msgid "NAT64 Prefix"
msgstr ""
msgid "NDP-Proxy"
msgstr ""
+msgid "NT Domain"
+msgstr ""
+
msgid "NTP server candidates"
msgstr ""
msgid "No DHCP Server configured for this interface"
msgstr ""
+msgid "No NAT-T"
+msgstr ""
+
msgid "No chains in this table"
msgstr "No chains in this table"
msgid "Noise"
msgstr "Noise"
-msgid "Noise Margin"
+msgid "Noise Margin (SNR)"
msgstr ""
msgid "Noise:"
msgstr ""
+msgid "Non Pre-emtive CRC errors (CRC_P)"
+msgstr ""
+
+msgid "Non-wildcard"
+msgstr ""
+
msgid "None"
msgstr ""
msgid "Note: Configuration files will be erased."
msgstr ""
+msgid "Note: interface name length"
+msgstr ""
+
msgid "Notice"
msgstr ""
msgid "OPKG-Configuration"
msgstr "OPKG-Configuration"
-msgid "Off-State Delay"
+msgid "Obfuscated Group Password"
msgstr ""
-msgid ""
+msgid "Obfuscated Password"
+msgstr ""
+
+msgid "Off-State Delay"
+msgstr ""
+
+msgid ""
"On this page you can configure the network interfaces. You can bridge "
"several interfaces by ticking the \"bridge interfaces\" field and enter the "
"names of several network interfaces separated by spaces. You can also use "
msgid "One or more fields contain invalid values!"
msgstr ""
+msgid "One or more invalid/required values on tab"
+msgstr ""
+
msgid "One or more required fields have no value!"
msgstr ""
msgid "Option removed"
msgstr ""
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Options"
msgid "Outbound:"
msgstr ""
-msgid "Outdoor Channels"
-msgstr "Outdoor Channels"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
+msgid "Override default interface name"
+msgstr ""
+
msgid "Override the gateway in DHCP responses"
msgstr ""
msgid "PIN"
msgstr ""
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr ""
msgid "PPPoE"
msgstr ""
+msgid "PPPoSSH"
+msgstr ""
+
msgid "PPtP"
msgstr ""
msgid "PSID-bits length"
msgstr ""
+msgid "PTM/EFM (Packet Transfer Mode)"
+msgstr ""
+
msgid "Package libiwinfo required!"
msgstr ""
msgid "Password of Private Key"
msgstr "Password of Private Key"
+msgid "Password of inner Private Key"
+msgstr ""
+
msgid "Password successfully changed!"
msgstr ""
msgid "Path to executable which handles the button event"
msgstr ""
+msgid "Path to inner CA-Certificate"
+msgstr ""
+
+msgid "Path to inner Client-Certificate"
+msgstr ""
+
+msgid "Path to inner Private Key"
+msgstr ""
+
msgid "Peak:"
msgstr ""
+msgid "Peer IP address to assign"
+msgstr ""
+
+msgid "Peers"
+msgstr ""
+
+msgid "Perfect Forward Secrecy"
+msgstr ""
+
msgid "Perform reboot"
msgstr "Perform reboot"
msgid "Perform reset"
msgstr ""
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Port"
msgstr "Port"
-msgid "Port %d"
+msgid "Port status:"
msgstr ""
-msgid "Port %d is untagged in multiple VLANs!"
+msgid "Power Management Mode"
msgstr ""
-msgid "Port status:"
+msgid "Pre-emtive CRC errors (CRCP_P)"
+msgstr ""
+
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
msgstr ""
msgid ""
"ignore failures"
msgstr ""
+msgid "Prevent listening on these interfaces."
+msgstr ""
+
msgid "Prevents client-to-client communication"
msgstr "Prevents client-to-client communication"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Proceed"
msgid "Processes"
msgstr "Processes"
+msgid "Profile"
+msgstr ""
+
msgid "Prot."
msgstr "Prot."
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr ""
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
+msgid "RFC3947 NAT-T mode"
+msgstr ""
+
msgid "RTS/CTS Threshold"
msgstr "RTS/CTS Threshold"
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr "Receiver Antenna"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr ""
msgid "References"
msgstr "References"
-msgid "Regulatory Domain"
-msgstr "Regulatory Domain"
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr ""
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Remove"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
+msgid ""
+"Requires upstream supports DNSSEC; verify unsigned domain responses really "
+"come from unsigned domains"
+msgstr ""
+
msgid "Reset"
msgstr "Reset"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
"Routes specify over which interface and gateway a certain host or network "
"can be reached."
-msgid "Rule #"
-msgstr "Rule #"
-
msgid "Run a filesystem check before mounting the device"
msgstr ""
msgid "Run filesystem check"
msgstr ""
+msgid "SHA256"
+msgstr ""
+
msgid ""
"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
"use 6in4 instead"
msgid "SIXXS-handle[/Tunnel-ID]"
msgstr ""
+msgid "SNR"
+msgstr ""
+
msgid "SSH Access"
msgstr ""
+msgid "SSH server address"
+msgstr ""
+
+msgid "SSH server port"
+msgstr ""
+
+msgid "SSH username"
+msgstr ""
+
msgid "SSH-Keys"
msgstr ""
msgid "Separate Clients"
msgstr "Separate Clients"
-msgid "Separate WDS"
-msgstr "Separate WDS"
-
msgid "Server Settings"
msgstr ""
msgid "Services"
msgstr "Services"
+msgid ""
+"Set interface properties regardless of the link carrier (If set, carrier "
+"sense events do not invoke hotplug handlers)."
+msgstr ""
+
msgid "Set up Time Synchronization"
msgstr ""
msgid "Setup DHCP Server"
msgstr ""
+msgid "Severely Errored Seconds (SES)"
+msgstr ""
+
+msgid "Short GI"
+msgstr ""
+
msgid "Show current backup file list"
msgstr ""
msgid "Signal"
msgstr "Signal"
+msgid "Signal Attenuation (SATN)"
+msgstr ""
+
msgid "Signal:"
msgstr ""
msgid "Software"
msgstr "Software"
+msgid "Software VLAN"
+msgstr ""
+
msgid "Some fields are invalid, cannot save values!"
msgstr ""
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr ""
msgid "Static Routes"
msgstr "Static Routes"
-msgid "Static WDS"
-msgstr ""
-
msgid "Static address"
msgstr ""
msgid "Submit"
msgstr "Submit"
+msgid "Suppress logging"
+msgstr ""
+
+msgid "Suppress logging of the routine operation of these protocols"
+msgstr ""
+
msgid "Swap"
msgstr ""
msgid "Switch %q (%s)"
msgstr ""
+msgid ""
+"Switch %q has an unknown topology - the VLAN settings might not be accurate."
+msgstr ""
+
+msgid "Switch VLAN"
+msgstr ""
+
msgid "Switch protocol"
msgstr ""
msgid "Target"
msgstr "Target"
+msgid "Target network"
+msgstr ""
+
msgid "Terminate"
msgstr "Terminate"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
"archive here."
msgstr ""
+msgid "Tone"
+msgstr ""
+
msgid "Total Available"
msgstr ""
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Turbo Mode"
-
msgid "Tx-Power"
msgstr ""
msgid "USB Device"
msgstr ""
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr ""
msgid "Unable to dispatch"
msgstr ""
+msgid "Unavailable Seconds (UAS)"
+msgstr ""
+
msgid "Unknown"
msgstr ""
msgid "Unmanaged"
msgstr ""
+msgid "Unmount"
+msgstr ""
+
msgid "Unsaved Changes"
msgstr "Unsaved Changes"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
+"requesting host. The optional <em>Lease time</em> can be used to set non-"
+"standard host-specific lease time, e.g. 12h, 3d or infinite."
msgstr ""
msgid "Used"
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "VC-Mux"
msgstr ""
-msgid "VLAN Interface"
+msgid "VDSL"
msgstr ""
msgid "VLANs on %q"
msgid "VLANs on %q (%s)"
msgstr ""
+msgid "VPN Local address"
+msgstr ""
+
+msgid "VPN Local port"
+msgstr ""
+
msgid "VPN Server"
msgstr ""
msgid "VPN Server's certificate SHA1 hash"
msgstr ""
+msgid "VPNC (CISCO 3000 (and others) VPN)"
+msgstr ""
+
+msgid "Vendor"
+msgstr ""
+
msgid "Vendor Class to send when requesting DHCP"
msgstr ""
msgid "Width"
msgstr ""
-msgid "Wifi"
-msgstr "Wifi"
+msgid "WireGuard VPN"
+msgstr ""
msgid "Wireless"
msgstr ""
msgid "Write received DNS requests to syslog"
msgstr ""
-msgid "XR Support"
-msgstr "XR Support"
+msgid "Write system log to file"
+msgstr ""
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"scripts like \"network\", your device might become inaccessible!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr ""
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr ""
msgid "« Back"
msgstr "« Back"
-#~ msgid "Path"
-#~ msgstr "Path"
-
-#~ msgid "Please wait: Device rebooting..."
-#~ msgstr "Please wait: Device rebooting..."
-
-#~ msgid ""
-#~ "Warning: There are unsaved changes that will be lost while rebooting!"
-#~ msgstr ""
-#~ "Warning: There are unsaved changes that will be lost while rebooting!"
-
-#~ msgid "Cached"
-#~ msgstr "Cached"
-
-#~ msgid "Configures this mount as overlay storage for block-extroot"
-#~ msgstr "Configures this mount as overlay storage for block-extroot"
-
-#~ msgid "Frequency Hopping"
-#~ msgstr "Frequency Hopping"
-
-#~ msgid "40MHz 2nd channel above"
-#~ msgstr "40MHz 2nd channel above"
-
-#~ msgid "40MHz 2nd channel below"
-#~ msgstr "40MHz 2nd channel below"
-
-#~ msgid "Accept router advertisements"
-#~ msgstr "Accept router advertisements"
-
-#~ msgid "Advertise IPv6 on network"
-#~ msgstr "Advertise IPv6 on network"
-
-#~ msgid "Advertised network ID"
-#~ msgstr "Advertised network ID"
-
-#~ msgid "Allowed range is 1 to 65535"
-#~ msgstr "Allowed range is 1 to 65535"
-
-#~ msgid "Active Leases"
-#~ msgstr "Active Leases"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Bit Rate"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Configuration / Apply"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Configuration / Changes"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Configuration / Revert"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encrypted\">Encr.</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-
-#~ msgid "Create Network"
-#~ msgstr "Create Network"
-
-#~ msgid "Link"
-#~ msgstr "Link"
-
-#~ msgid "Networks"
-#~ msgstr "Networks"
-
-#~ msgid "Power"
-#~ msgstr "Power"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Wifi networks in your local environment"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Files to be kept when flashing a new firmware"
-
-#~ msgid "General"
-#~ msgstr "General"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Post-commit actions"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-
-#~ msgid "ARP ping retries"
-#~ msgstr "ARP ping retries"
-
-#~ msgid "ATM Settings"
-#~ msgstr "ATM Settings"
-
-#~ msgid "Accept Router Advertisements"
-#~ msgstr "Accept Router Advertisements"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Access point (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Additional pppd options"
-
-#~ msgid "Allowed range is 1 to FFFF"
-#~ msgstr "Allowed range is 1 to FFFF"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Automatic Disconnect"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Backup Archive"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-
-#~ msgid "Connect script"
-#~ msgstr "Connect script"
-
-#~ msgid "Create backup"
-#~ msgstr "Create backup"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Disconnect script"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Edit package lists and installation targets"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Enable IPv6 on PPP link"
-
-#~ msgid "Firmware image"
-#~ msgstr "Firmware image"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-
-#~ msgid "Installation targets"
-#~ msgstr "Installation targets"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Keep configuration files"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Keep-Alive"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "Let pppd run this script after establishing the PPP link"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "Let pppd run this script before tearing down the PPP link"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr "Number of failed connection tests to initiate automatic reconnect"
-
-#~ msgid "PIN code"
-#~ msgstr "PIN code"
-
-#~ msgid "PPP Settings"
-#~ msgstr "PPP Settings"
-
-#~ msgid "Package lists"
-#~ msgstr "Package lists"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "Proceed reverting all settings and resetting to firmware defaults?"
-
-#~ msgid "Processor"
-#~ msgstr "Processor"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Radius-Port"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Radius-Server"
-
-#~ msgid "Replace default route"
-#~ msgstr "Replace default route"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Reset router to defaults"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-
-#~ msgid "Service type"
-#~ msgstr "Service type"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "Services and daemons perform certain tasks on your device."
-
-#~ msgid "Settings"
-#~ msgstr "Settings"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Setup wait time"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "Specify additional command line arguments for pppd here"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "The device node of your modem, e.g. /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr "Time (in seconds) after which an unused connection will be closed"
-
-#~ msgid "Update package lists"
-#~ msgstr "Update package lists"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "Upload an OpenWrt image file to reflash the device."
-
-#~ msgid "Upload image"
-#~ msgstr "Upload image"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Use peer DNS"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-
-#~ msgid "back"
-#~ msgstr "back"
-
-#~ msgid "buffered"
-#~ msgstr "buffered"
-
-#~ msgid "cached"
-#~ msgstr "cached"
-
-#~ msgid "free"
-#~ msgstr "free"
-
-#~ msgid "static"
-#~ msgstr "static"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "About"
-#~ msgstr "About"
-
-#~ msgid "Active IP Connections"
-#~ msgstr "Active IP Connections"
-
-#~ msgid "Addresses"
-#~ msgstr "Addresses"
-
-#~ msgid "Admin Password"
-#~ msgstr "Admin Password"
-
-#~ msgid "Alias"
-#~ msgstr "Alias"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Authentication Realm"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Bridge Port"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Client + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "Configuration file"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Connection timeout"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Contributing Developers"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP assigned"
-
-#~ msgid "Document root"
-#~ msgstr "Document root"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Enable Keep-Alive"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Ethernet Bridge"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "IP Configuration"
-
-#~ msgid "Interface Status"
-#~ msgstr "Interface Status"
-
-#~ msgid "Lead Development"
-#~ msgstr "Lead Development"
-
-#~ msgid "Master"
-#~ msgstr "Master"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Master + WDS"
-
-#~ msgid "Not configured"
-#~ msgstr "Not configured"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Password successfully changed"
-
-#~ msgid "Plugin path"
-#~ msgstr "Plugin path"
-
-#~ msgid "Ports"
-#~ msgstr "Ports"
-
-#~ msgid "Primary"
-#~ msgstr "Primary"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Project Homepage"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Pseudo Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "Thanks To"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Unknown Error"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "defaults to <code>/etc/httpd.conf</code>"
-
-#~ msgid "OPKG error code %i"
-#~ msgstr "OPKG error code %i"
-
-#~ msgid "Package lists updated"
-#~ msgstr "Package lists updated"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Upgrade installed packages"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-
-#~ msgid "Search file..."
-#~ msgstr "Search file..."
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "And now have fun with your router!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-
-#~ msgid "Hello!"
-#~ msgstr "Hello!"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save & Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save & Apply "
-#~ "before being applied."
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-
-#~ msgid "User Interface"
-#~ msgstr "User Interface"
-
-#~ msgid "enable"
-#~ msgstr "enable"
-
-#~ msgid "(hidden)"
-#~ msgstr "(hidden)"
-
-#~ msgid "(optional)"
-#~ msgstr "(optional)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "AP-Isolation"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Add the Wifi network to physical network"
-
-#~ msgid "Aliases"
-#~ msgstr "Aliases"
-
-#~ msgid "Attach to existing network"
-#~ msgstr "Attach to existing network"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Clamp Segment Size"
+#~ msgid "AR Support"
+#~ msgstr "AR Support"
-#~ msgid "Create Or Attach Network"
-#~ msgstr "Create Or Attach Network"
+#~ msgid "Background Scan"
+#~ msgstr "Background Scan"
-#~ msgid "DHCP"
-#~ msgstr "DHCP"
+#~ msgid "Compression"
+#~ msgstr "Compression"
-#~ msgid "Devices"
-#~ msgstr "Devices"
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Disable HW-Beacon timer"
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "Don't forward reverse lookups for local networks"
+#~ msgid "Do not send probe responses"
+#~ msgstr "Do not send probe responses"
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "Enable TFTP-Server"
+#~ msgid "Fast Frames"
+#~ msgstr "Fast Frames"
-#~ msgid "Errors"
-#~ msgstr "Errors"
+#~ msgid "Maximum Rate"
+#~ msgstr "Maximum Rate"
-#~ msgid "Essentials"
-#~ msgstr "Essentials"
+#~ msgid "Minimum Rate"
+#~ msgstr "Minimum Rate"
-#~ msgid "Expand Hosts"
-#~ msgstr "Expand Hosts"
-
-#~ msgid "First leased address"
-#~ msgstr "First leased address"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Hardware Address"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Here you can configure installed wifi devices."
-
-#~ msgid ""
-#~ "If the interface is attached to an existing network it will be "
-#~ "<em>bridged</em> to the existing interfaces and is covered by the "
-#~ "firewall zone of the choosen network.<br />Uncheck the attach option to "
-#~ "define a new standalone network for this interface."
-#~ msgstr ""
-#~ "If the interface is attached to an existing network it will be "
-#~ "<em>bridged</em> to the existing interfaces and is covered by the "
-#~ "firewall zone of the choosen network.<br />Uncheck the attach option to "
-#~ "define a new standalone network for this interface."
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "Independent (Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "Internet Connection"
-
-#~ msgid "Join (Client)"
-#~ msgstr "Join (Client)"
-
-#~ msgid "Leases"
-#~ msgstr "Leases"
-
-#~ msgid "Local Domain"
-#~ msgstr "Local Domain"
-
-#~ msgid "Local Network"
-#~ msgstr "Local Network"
-
-#~ msgid "Local Server"
-#~ msgstr "Local Server"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "Network Boot Image"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Number of leased addresses"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Perform Actions"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Prevents Client to Client communication"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Provide (Access Point)"
-
-#~ msgid "Resolvfile"
-#~ msgstr "Resolvfile"
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "TFTP-Server Root"
-
-#~ msgid "TX / RX"
-#~ msgstr "TX / RX"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "The following changes have been applied"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-
-#~ msgid "Wireless Scan"
-#~ msgstr "Wireless Scan"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-
-#~ msgid ""
-#~ "You are about to join the wireless network <em><strong>%s</strong></em>. "
-#~ "In order to complete the process, you need to provide some additional "
-#~ "details."
-#~ msgstr ""
-#~ "You are about to join the wireless network <em><strong>%s</strong></em>. "
-#~ "In order to complete the process, you need to provide some additional "
-#~ "details."
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-
-#~ msgid ""
-#~ "You need to install <a href='%s'><em>wpa-supplicant</em></a> to use WPA!"
-#~ msgstr ""
-#~ "You need to install <a href='%s'><em>wpa-supplicant</em></a> to use WPA!"
-
-#~ msgid ""
-#~ "You need to install the <a href='%s'>Broadcom <em>nas</em> supplicant</a> "
-#~ "to use WPA!"
-#~ msgstr ""
-#~ "You need to install the <a href='%s'>Broadcom <em>nas</em> supplicant</a> "
-#~ "to use WPA!"
-
-#~ msgid "Zone"
-#~ msgstr "Zone"
-
-#~ msgid "additional hostfile"
-#~ msgstr "additional hostfile"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "adds domain names to hostentries in the resolv file"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "automatically reconnect"
-
-#~ msgid "concurrent queries"
-#~ msgstr "concurrent queries"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "disconnect when idle for"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "don't cache unknown"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-
-#~ msgid "installed"
-#~ msgstr "installed"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "localises the hostname depending on its subnet"
-
-#~ msgid "manual"
-#~ msgstr "manual"
-
-#~ msgid "not installed"
-#~ msgstr "not installed"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-
-#~ msgid "query port"
-#~ msgstr "query port"
-
-#~ msgid "transmitted / received"
-#~ msgstr "transmitted / received"
-
-#~ msgid "all"
-#~ msgstr "all"
-
-#~ msgid "Code"
-#~ msgstr "Code"
-
-#~ msgid "Distance"
-#~ msgstr "Distance"
+#~ msgid "Multicast Rate"
+#~ msgstr "Multicast Rate"
-#~ msgid "Legend"
-#~ msgstr "Legend"
+#~ msgid "Outdoor Channels"
+#~ msgstr "Outdoor Channels"
-#~ msgid "Library"
-#~ msgstr "Library"
+#~ msgid "Regulatory Domain"
+#~ msgstr "Regulatory Domain"
-#~ msgid "see '%s' manpage"
-#~ msgstr "see '%s' manpage"
+#~ msgid "Separate WDS"
+#~ msgstr "Separate WDS"
-#~ msgid "Package Manager"
-#~ msgstr "Package Manager"
+#~ msgid "Turbo Mode"
+#~ msgstr "Turbo Mode"
-#~ msgid "Service"
-#~ msgstr "Service"
+#~ msgid "XR Support"
+#~ msgstr "XR Support"
-#~ msgid "Statistics"
-#~ msgstr "Statistics"
+#~ msgid "An additional network will be created if you leave this unchecked."
+#~ msgstr "An additional network will be created if you leave this unchecked."
-#~ msgid "zone"
-#~ msgstr "Zone"
+#~ msgid "CPU"
+#~ msgstr "CPU"
projects / project / luci.git / blobdiff