m = Map("wireless", "",
translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
- "hardware such as channel, transmit power or antenna selection which is shared among all " ..
+ "hardware such as channel, transmit power or antenna selection which are shared among all " ..
"defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings " ..
"like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
-- NanoFoo
local nsantenna = wdev:get("antenna")
--- Check whether there is a client interface on the same radio,
--- if yes, lock the channel choice as the station will dicatate the freq
-local has_sta = nil
+-- Check whether there are client interfaces on the same radio,
+-- if yes, lock the channel choice as these stations will dicatate the freq
+local found_sta = nil
local _, net
-for _, net in ipairs(wdev:get_wifinets()) do
- if net:mode() == "sta" and net:id() ~= wnet:id() then
- has_sta = net
- break
+if wnet:mode() ~= "sta" then
+ for _, net in ipairs(wdev:get_wifinets()) do
+ if net:mode() == "sta" then
+ if not found_sta then
+ found_sta = {}
+ found_sta.channel = net:channel()
+ found_sta.names = {}
+ end
+ found_sta.names[#found_sta.names+1] = net:shortname()
+ end
end
end
-if has_sta then
+if found_sta then
ch = s:taboption("general", DummyValue, "choice", translate("Channel"))
- ch.value = translatef("Locked to channel %d used by %s",
- has_sta:channel(), has_sta:shortname())
+ ch.value = translatef("Locked to channel %d used by: %s",
+ found_sta.channel, table.concat(found_sta.names, ", "))
else
- ch = s:taboption("general", Value, "channel", translate("Channel"))
- ch:value("auto", translate("auto"))
- for _, f in ipairs(iw and iw.freqlist or { }) do
- if not f.restricted then
- ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
- end
+ ch = s:taboption("general", Value, "_mode_freq", '<br />'..translate("Operating frequency"))
+ ch.hwmodes = iw.hwmodelist
+ ch.freqlist = iw.freqlist
+ ch.template = "cbi/wireless_modefreq"
+
+ function ch.cfgvalue(self, section)
+ return {
+ m:get(section, "hwmode") or "",
+ m:get(section, "channel") or "auto",
+ m:get(section, "htmode") or ""
+ }
+ end
+
+ function ch.formvalue(self, section)
+ return {
+ m:formvalue(self:cbid(section) .. ".band") or (iw.hwmodelist.g and "11g" or "11a"),
+ m:formvalue(self:cbid(section) .. ".channel") or "auto",
+ m:formvalue(self:cbid(section) .. ".htmode") or ""
+ }
+ end
+
+ function ch.write(self, section, value)
+ m:set(section, "hwmode", value[1])
+ m:set(section, "channel", value[2])
+ m:set(section, "htmode", value[3])
end
end
end
end
- mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
- if hw_modes.b then mode:value("11b", "802.11b") end
- if hw_modes.g then mode:value("11g", "802.11g") end
- if hw_modes.a then mode:value("11a", "802.11a") end
-
- if hw_modes.n then
- htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode (802.11n)"))
- htmode:depends("hwmode", "11a")
- htmode:depends("hwmode", "11g")
- htmode:value("", translate("disabled"))
- htmode:value("HT20", "20MHz")
- htmode:value("HT40", "40MHz")
-
- function mode.cfgvalue(...)
- local v = Value.cfgvalue(...)
- if v == "11na" then
- return "11a"
- elseif v == "11ng" then
- return "11g"
- end
- return v
- end
-
- noscan = s:taboption("advanced", Flag, "noscan", translate("Force 40MHz mode"),
- translate("Always use 40MHz channels even if the secondary channel overlaps. Using this option does not comply with IEEE 802.11n-2009!"))
- noscan:depends("htmode", "HT40")
- noscan.default = noscan.disabled
-
- --htcapab = s:taboption("advanced", DynamicList, "ht_capab", translate("HT capabilities"))
- --htcapab:depends("hwmode", "11na")
- --htcapab:depends("hwmode", "11ng")
- end
-
local cl = iw and iw.countrylist
if cl and #cl > 0 then
cc = s:taboption("advanced", ListValue, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
%{ p.display_dbm, p.display_mw })
end
- mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
- mode:value("", translate("auto"))
- if hw_modes.b then mode:value("11b", "802.11b") end
- if hw_modes.g then mode:value("11g", "802.11g") end
- if hw_modes.a then mode:value("11a", "802.11a") end
- if hw_modes.g then mode:value("11bg", "802.11b+g") end
- if hw_modes.g then mode:value("11gst", "802.11g + Turbo") end
- if hw_modes.a then mode:value("11ast", "802.11a + Turbo") end
- mode:value("fh", translate("Frequency Hopping"))
-
s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
if not nsantenna then
%{ p.display_dbm, p.display_mw })
end
- mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
- mode:value("11bg", "802.11b+g")
- mode:value("11b", "802.11b")
- mode:value("11g", "802.11g")
- mode:value("11gst", "802.11g + Turbo")
-
ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
ant1.widget = "radio"
ant1:depends("diversity", "")
password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
end
+if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+ local wpasupplicant = fs.access("/usr/sbin/wpa_supplicant")
+ local hostcli = fs.access("/usr/sbin/hostapd_cli")
+ if hostcli and wpasupplicant then
+ wps = s:taboption("encryption", Flag, "wps_pushbutton", translate("Enable WPS pushbutton, requires WPA(2)-PSK"))
+ wps.enabled = "1"
+ wps.disabled = "0"
+ wps.rmempty = false
+ wps:depends("encryption", "psk")
+ wps:depends("encryption", "psk2")
+ wps:depends("encryption", "psk-mixed")
+ end
+end
+
return m
projects / project / luci.git / blobdiff