local wa = require "luci.tools.webadmin"
local nw = require "luci.model.network"
+local ut = require "luci.util"
+local nt = require "luci.sys".net
local fs = require "nixio.fs"
arg[1] = arg[1] or ""
m = Map("wireless", "",
translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
- "hardware such as channel, transmit power or antenna selection which is shared among all " ..
+ "hardware such as channel, transmit power or antenna selection which are shared among all " ..
"defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings " ..
"like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
m:chain("network")
+m:chain("firewall")
local ifsection
end
-- wireless toggle was requested, commit and reload page
-if m:formvalue("cbid.wireless.%s.__toggle" % wdev:name()) then
- if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
- wnet:set("disabled", nil)
- else
- wnet:set("disabled", "1")
- end
- wdev:set("disabled", nil)
+function m.parse(map)
+ if m:formvalue("cbid.wireless.%s.__toggle" % wdev:name()) then
+ if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
+ wnet:set("disabled", nil)
+ else
+ wnet:set("disabled", "1")
+ end
+ wdev:set("disabled", nil)
- nw:commit("wireless")
- luci.sys.call("(env -i /sbin/wifi down; env -i /sbin/wifi up) >/dev/null 2>/dev/null")
+ nw:commit("wireless")
+ luci.sys.call("(env -i /bin/ubus call network reload) >/dev/null 2>/dev/null")
- luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
- return
+ luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
+ return
+ end
+ Map.parse(map)
end
m.title = luci.util.pcdata(wnet:get_i18n())
+local function txpower_list(iw)
+ local list = iw.txpwrlist or { }
+ local off = tonumber(iw.txpower_offset) or 0
+ local new = { }
+ local prev = -1
+ local _, val
+ for _, val in ipairs(list) do
+ local dbm = val.dbm + off
+ local mw = math.floor(10 ^ (dbm / 10))
+ if mw ~= prev then
+ prev = mw
+ new[#new+1] = {
+ display_dbm = dbm,
+ display_mw = mw,
+ driver_dbm = val.dbm,
+ driver_mw = val.mw
+ }
+ end
+ end
+ return new
+end
+
+local function txpower_current(pwr, list)
+ pwr = tonumber(pwr)
+ if pwr ~= nil then
+ local _, item
+ for _, item in ipairs(list) do
+ if item.driver_dbm >= pwr then
+ return item.driver_dbm
+ end
+ end
+ end
+ return (list[#list] and list[#list].driver_dbm) or pwr or 0
+end
+
local iw = luci.sys.wifi.getiwinfo(arg[1])
-local hw_modes = iw.hwmodelist or { }
-local tx_powers = iw.txpwrlist or { }
-local tx_power = tostring(
- (iw.txpower and iw.txpower > 0 and iw.txpower) or
- (#tx_powers > 0 and tx_powers[#tx_powers].dbm)
-)
+local hw_modes = iw.hwmodelist or { }
+local tx_power_list = txpower_list(iw)
+local tx_power_cur = txpower_current(wdev:get("txpower"), tx_power_list)
s = m:section(NamedSection, wdev:name(), "wifi-device", translate("Device Configuration"))
s.addremove = false
local hwtype = wdev:get("type")
-local htcaps = wdev:get("ht_capab") and true or false
-- NanoFoo
local nsantenna = wdev:get("antenna")
-ch = s:taboption("general", Value, "channel", translate("Channel"))
-ch:value("auto", translate("auto"))
-for _, f in ipairs(iw and iw.freqlist or luci.sys.wifi.channels()) do
- if not f.restricted then
- ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
+-- Check whether there is a client interface on the same radio,
+-- if yes, lock the channel choice as the station will dicatate the freq
+local has_sta = nil
+local _, net
+for _, net in ipairs(wdev:get_wifinets()) do
+ if net:mode() == "sta" and net:id() ~= wnet:id() then
+ has_sta = net
+ break
end
end
+if has_sta then
+ ch = s:taboption("general", DummyValue, "choice", translate("Channel"))
+ ch.value = translatef("Locked to channel %d used by %s",
+ has_sta:channel(), has_sta:shortname())
+else
+ ch = s:taboption("general", Value, "channel", translate("Channel"))
+ ch:value("auto", translate("auto"))
+ for _, f in ipairs(iw and iw.freqlist or { }) do
+ if not f.restricted then
+ ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
+ end
+ end
+end
------------------- MAC80211 Device ------------------
if hwtype == "mac80211" then
- tp = s:taboption("general",
- (tx_powers and #tx_powers > 0) and ListValue or Value,
- "txpower", translate("Transmit Power"), "dBm")
+ if #tx_power_list > 1 then
+ tp = s:taboption("general", ListValue,
+ "txpower", translate("Transmit Power"), "dBm")
+ tp.rmempty = true
+ tp.default = tx_power_cur
+ function tp.cfgvalue(...)
+ return txpower_current(Value.cfgvalue(...), tx_power_list)
+ end
- tp.rmempty = true
- tp.default = tx_power
- for _, p in ipairs(tx_powers or {}) do
- tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
+ for _, p in ipairs(tx_power_list) do
+ tp:value(p.driver_dbm, "%i dBm (%i mW)"
+ %{ p.display_dbm, p.display_mw })
+ end
end
- mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
- mode:value("", translate("auto"))
- if hw_modes.b then mode:value("11b", "802.11b") end
- if hw_modes.g then mode:value("11g", "802.11g") end
- if hw_modes.a then mode:value("11a", "802.11a") end
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Band"))
+
+ if hw_modes.ac then
+ if hw_modes.ac then mode:value("11a", "5GHz (802.11n+ac)") end
- if htcaps then
- if hw_modes.g and hw_modes.n then mode:value("11ng", "802.11g+n") end
- if hw_modes.a and hw_modes.n then mode:value("11na", "802.11a+n") end
+ htmode = s:taboption("advanced", ListValue, "htmode", translate("VHT mode (802.11ac)"))
+ htmode:value("", translate("disabled"))
+ htmode:value("VHT20", "20MHz")
+ htmode:value("VHT40", "40MHz")
+ htmode:value("VHT80", "80MHz")
- htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode"))
- htmode:depends("hwmode", "11na")
- htmode:depends("hwmode", "11ng")
+ elseif hw_modes.n then
+ if hw_modes.g then mode:value("11g", "2.4GHz (802.11g+n)") end
+ if hw_modes.a then mode:value("11a", "5GHz (802.11a+n)") end
+
+ htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode (802.11n)"))
+ htmode:value("", translate("disabled"))
htmode:value("HT20", "20MHz")
- htmode:value("HT40-", translate("40MHz 2nd channel below"))
- htmode:value("HT40+", translate("40MHz 2nd channel above"))
+ htmode:value("HT40", "40MHz")
+
+ function mode.cfgvalue(...)
+ local v = Value.cfgvalue(...)
+ if v == "11na" then
+ return "11a"
+ elseif v == "11ng" then
+ return "11g"
+ end
+ return v
+ end
- --htcapab = s:taboption("advanced", DynamicList, "ht_capab", translate("HT capabilities"))
- --htcapab:depends("hwmode", "11na")
- --htcapab:depends("hwmode", "11ng")
+ noscan = s:taboption("advanced", Flag, "noscan", translate("Force 40MHz mode"),
+ translate("Always use 40MHz channels even if the secondary channel overlaps. Using this option does not comply with IEEE 802.11n-2009!"))
+ noscan:depends("htmode", "HT40")
+ noscan.default = noscan.disabled
+ else
+ if hw_modes.g then mode:value("11g", "2.4GHz (802.11g)") end
+ if hw_modes.a then mode:value("11a", "5GHz (802.11a)") end
end
local cl = iw and iw.countrylist
s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
translate("Distance to farthest network member in meters."))
+
+ -- external antenna profiles
+ local eal = iw and iw.extant
+ if eal and #eal > 0 then
+ ea = s:taboption("advanced", ListValue, "extant", translate("Antenna Configuration"))
+ for _, eap in ipairs(eal) do
+ ea:value(eap.id, "%s (%s)" %{ eap.name, eap.description })
+ if eap.selected then
+ ea.default = eap.id
+ end
+ end
+ end
+
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
end
if hwtype == "atheros" then
tp = s:taboption("general",
- (#tx_powers > 0) and ListValue or Value,
+ (#tx_power_list > 0) and ListValue or Value,
"txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
- tp.default = tx_power
- for _, p in ipairs(tx_powers or {}) do
- tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
+ tp.default = tx_power_cur
+
+ function tp.cfgvalue(...)
+ return txpower_current(Value.cfgvalue(...), tx_power_list)
+ end
+
+ for _, p in ipairs(tx_power_list) do
+ tp:value(p.driver_dbm, "%i dBm (%i mW)"
+ %{ p.display_dbm, p.display_mw })
end
mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
if hwtype == "broadcom" then
tp = s:taboption("general",
- (#tx_powers > 0) and ListValue or Value,
+ (#tx_power_list > 0) and ListValue or Value,
"txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
- tp.default = tx_power
- for _, p in ipairs(tx_powers or {}) do
- tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
+ tp.default = tx_power_cur
+
+ function tp.cfgvalue(...)
+ return txpower_current(Value.cfgvalue(...), tx_power_list)
+ end
+
+ for _, p in ipairs(tx_power_list) do
+ tp:value(p.driver_dbm, "%i dBm (%i mW)"
+ %{ p.display_dbm, p.display_mw })
end
mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
network = s:taboption("general", Value, "network", translate("Network"),
- translate("Choose the network you want to attach to this wireless interface. " ..
- "Select <em>unspecified</em> to not attach any network or fill out the " ..
- "<em>create</em> field to define a new network."))
+ translate("Choose the network(s) you want to attach to this wireless interface or " ..
+ "fill out the <em>create</em> field to define a new network."))
network.rmempty = true
network.template = "cbi/network_netlist"
-network.widget = "radio"
+network.widget = "checkbox"
+network.novirtual = true
function network.write(self, section, value)
local i = nw:get_interface(section)
if n then n:del_interface(i) end
end
else
- local n = nw:get_network(value)
- if n then
- n:set("type", "bridge")
- n:add_interface(i)
+ local v
+ for _, v in ipairs(i:get_networks()) do
+ v:del_interface(i)
+ end
+ for v in ut.imatch(value) do
+ local n = nw:get_network(v)
+ if n then
+ if not n:is_empty() then
+ n:set("type", "bridge")
+ end
+ n:add_interface(i)
+ end
end
end
end
mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
mode:value("monitor", translate("Monitor"))
bssid:depends({mode="adhoc"})
+ bssid:depends({mode="sta"})
+ bssid:depends({mode="sta-wds"})
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
-
mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
+ mp:depends({mode="ap"})
+ mp:depends({mode="ap-wds"})
mp:value("", translate("disable"))
mp:value("allow", translate("Allow listed only"))
mp:value("deny", translate("Allow all except listed"))
ml.datatype = "macaddr"
ml:depends({macfilter="allow"})
ml:depends({macfilter="deny"})
+ nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
hidden:depends({mode="ap"})
hidden:depends({mode="ap-wds"})
+
+ wmm = s:taboption("general", Flag, "wmm", translate("WMM Mode"))
+ wmm:depends({mode="ap"})
+ wmm:depends({mode="ap-wds"})
+ wmm.default = wmm.enabled
end
ml.datatype = "macaddr"
ml:depends({macpolicy="allow"})
ml:depends({macpolicy="deny"})
+ nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
ml:depends({macpolicy="allow"})
ml:depends({macpolicy="deny"})
+ nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
encr:depends({mode="sta-wds"})
encr:depends({mode="mesh"})
+cipher = s:taboption("encryption", ListValue, "cipher", translate("Cipher"))
+cipher:depends({encryption="wpa"})
+cipher:depends({encryption="wpa2"})
+cipher:depends({encryption="psk"})
+cipher:depends({encryption="psk2"})
+cipher:depends({encryption="wpa-mixed"})
+cipher:depends({encryption="psk-mixed"})
+cipher:value("auto", translate("auto"))
+cipher:value("ccmp", translate("Force CCMP (AES)"))
+cipher:value("tkip", translate("Force TKIP"))
+cipher:value("tkip+ccmp", translate("Force TKIP and CCMP (AES)"))
+
+function encr.cfgvalue(self, section)
+ local v = tostring(ListValue.cfgvalue(self, section))
+ if v == "wep" then
+ return "wep-open"
+ elseif v and v:match("%+") then
+ return (v:gsub("%+.+$", ""))
+ end
+ return v
+end
+
+function encr.write(self, section, value)
+ local e = tostring(encr:formvalue(section))
+ local c = tostring(cipher:formvalue(section))
+ if value == "wpa" or value == "wpa2" then
+ self.map.uci:delete("wireless", section, "key")
+ end
+ if e and (c == "tkip" or c == "ccmp" or c == "tkip+ccmp") then
+ e = e .. "+" .. c
+ end
+ self.map:set(section, "encryption", e)
+end
+
+function cipher.cfgvalue(self, section)
+ local v = tostring(ListValue.cfgvalue(encr, section))
+ if v and v:match("%+") then
+ v = v:gsub("^[^%+]+%+", "")
+ if v == "aes" then v = "ccmp"
+ elseif v == "tkip+aes" then v = "tkip+ccmp"
+ elseif v == "aes+tkip" then v = "tkip+ccmp"
+ elseif v == "ccmp+tkip" then v = "tkip+ccmp"
+ end
+ end
+ return v
+end
+
+function cipher.write(self, section)
+ return encr:write(section)
+end
+
+
encr:value("none", "No Encryption")
-encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
-encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
+encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
local supplicant = fs.access("/usr/sbin/wpa_supplicant")
local hostapd = fs.access("/usr/sbin/hostapd")
+ -- Probe EAP support
+ local has_ap_eap = (os.execute("hostapd -veap >/dev/null 2>/dev/null") == 0)
+ local has_sta_eap = (os.execute("wpa_supplicant -veap >/dev/null 2>/dev/null") == 0)
+
if hostapd and supplicant then
- encr:value("psk", "WPA-PSK")
- encr:value("psk2", "WPA2-PSK")
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
- encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ if has_ap_eap and has_sta_eap then
+ encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ end
elseif hostapd and not supplicant then
- encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
- encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
- encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
+ encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"})
+ encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"})
+ if has_ap_eap then
+ encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
+ end
encr.description = translate(
"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
"and ad-hoc mode) to be installed."
encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
- encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
+ if has_sta_eap then
+ encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
+ end
encr.description = translate(
"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
"and ad-hoc mode) to be installed."
encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
end
-encr:depends("mode", "ap")
-encr:depends("mode", "sta")
-encr:depends("mode", "ap-wds")
-encr:depends("mode", "sta-wds")
-encr:depends("mode", "wds")
-
-server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
-server:depends({mode="ap", encryption="wpa"})
-server:depends({mode="ap", encryption="wpa2"})
-server:depends({mode="ap-wds", encryption="wpa"})
-server:depends({mode="ap-wds", encryption="wpa2"})
-server.rmempty = true
-
-port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
-port:depends({mode="ap", encryption="wpa"})
-port:depends({mode="ap", encryption="wpa2"})
-port:depends({mode="ap-wds", encryption="wpa"})
-port:depends({mode="ap-wds", encryption="wpa2"})
-port.rmempty = true
+auth_server = s:taboption("encryption", Value, "auth_server", translate("Radius-Authentication-Server"))
+auth_server:depends({mode="ap", encryption="wpa"})
+auth_server:depends({mode="ap", encryption="wpa2"})
+auth_server:depends({mode="ap-wds", encryption="wpa"})
+auth_server:depends({mode="ap-wds", encryption="wpa2"})
+auth_server.rmempty = true
+auth_server.datatype = "host"
+
+auth_port = s:taboption("encryption", Value, "auth_port", translate("Radius-Authentication-Port"), translatef("Default %d", 1812))
+auth_port:depends({mode="ap", encryption="wpa"})
+auth_port:depends({mode="ap", encryption="wpa2"})
+auth_port:depends({mode="ap-wds", encryption="wpa"})
+auth_port:depends({mode="ap-wds", encryption="wpa2"})
+auth_port.rmempty = true
+auth_port.datatype = "port"
+
+auth_secret = s:taboption("encryption", Value, "auth_secret", translate("Radius-Authentication-Secret"))
+auth_secret:depends({mode="ap", encryption="wpa"})
+auth_secret:depends({mode="ap", encryption="wpa2"})
+auth_secret:depends({mode="ap-wds", encryption="wpa"})
+auth_secret:depends({mode="ap-wds", encryption="wpa2"})
+auth_secret.rmempty = true
+auth_secret.password = true
+
+acct_server = s:taboption("encryption", Value, "acct_server", translate("Radius-Accounting-Server"))
+acct_server:depends({mode="ap", encryption="wpa"})
+acct_server:depends({mode="ap", encryption="wpa2"})
+acct_server:depends({mode="ap-wds", encryption="wpa"})
+acct_server:depends({mode="ap-wds", encryption="wpa2"})
+acct_server.rmempty = true
+acct_server.datatype = "host"
+
+acct_port = s:taboption("encryption", Value, "acct_port", translate("Radius-Accounting-Port"), translatef("Default %d", 1813))
+acct_port:depends({mode="ap", encryption="wpa"})
+acct_port:depends({mode="ap", encryption="wpa2"})
+acct_port:depends({mode="ap-wds", encryption="wpa"})
+acct_port:depends({mode="ap-wds", encryption="wpa2"})
+acct_port.rmempty = true
+acct_port.datatype = "port"
+
+acct_secret = s:taboption("encryption", Value, "acct_secret", translate("Radius-Accounting-Secret"))
+acct_secret:depends({mode="ap", encryption="wpa"})
+acct_secret:depends({mode="ap", encryption="wpa2"})
+acct_secret:depends({mode="ap-wds", encryption="wpa"})
+acct_secret:depends({mode="ap-wds", encryption="wpa2"})
+acct_secret.rmempty = true
+acct_secret.password = true
wpakey = s:taboption("encryption", Value, "_wpa_key", translate("Key"))
wpakey:depends("encryption", "psk")
wpakey:depends("encryption", "psk2")
wpakey:depends("encryption", "psk+psk2")
wpakey:depends("encryption", "psk-mixed")
-wpakey:depends({mode="ap", encryption="wpa"})
-wpakey:depends({mode="ap", encryption="wpa2"})
-wpakey:depends({mode="ap-wds", encryption="wpa"})
-wpakey:depends({mode="ap-wds", encryption="wpa2"})
wpakey.datatype = "wpakey"
wpakey.rmempty = true
wpakey.password = true
cacert:depends({mode="sta-wds", encryption="wpa"})
cacert:depends({mode="sta-wds", encryption="wpa2"})
+ clientcert = s:taboption("encryption", FileUpload, "client_cert", translate("Path to Client-Certificate"))
+ clientcert:depends({mode="sta", encryption="wpa"})
+ clientcert:depends({mode="sta", encryption="wpa2"})
+ clientcert:depends({mode="sta-wds", encryption="wpa"})
+ clientcert:depends({mode="sta-wds", encryption="wpa2"})
+
privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
projects / project / luci.git / blobdiff