local wa = require "luci.tools.webadmin"
local nw = require "luci.model.network"
-local ww = require "luci.model.wireless"
+local ut = require "luci.util"
+local nt = require "luci.sys".net
local fs = require "nixio.fs"
arg[1] = arg[1] or ""
-arg[2] = arg[2] or ""
m = Map("wireless", "",
translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
"like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
m:chain("network")
+m:chain("firewall")
local ifsection
function m.on_commit(map)
- nw.init(map.uci)
- ww.init(map.uci)
-
- local wnet = ww:get_network(arg[2])
+ local wnet = nw:get_wifinet(arg[1])
if ifsection and wnet then
ifsection.section = wnet.sid
+ m.title = luci.util.pcdata(wnet:get_i18n())
end
end
nw.init(m.uci)
-ww.init(m.uci)
-local wnet = ww:get_network(arg[2])
-m.title = wnet and ww:get_i18n(wnet) or translate("Wireless Network")
+local wnet = nw:get_wifinet(arg[1])
+local wdev = wnet and wnet:get_device()
+
+-- redirect to overview page if network does not exist anymore (e.g. after a revert)
+if not wnet or not wdev then
+ luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless"))
+ return
+end
+
+-- wireless toggle was requested, commit and reload page
+function m.parse(map)
+ if m:formvalue("cbid.wireless.%s.__toggle" % wdev:name()) then
+ if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
+ wnet:set("disabled", nil)
+ else
+ wnet:set("disabled", "1")
+ end
+ wdev:set("disabled", nil)
+
+ nw:commit("wireless")
+ luci.sys.call("(env -i /bin/ubus call network reload) >/dev/null 2>/dev/null")
+ luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
+ return
+ end
+ Map.parse(map)
+end
-local iw = nil
-local tx_powers = nil
+m.title = luci.util.pcdata(wnet:get_i18n())
+
+
+local function txpower_list(iw)
+ local list = iw.txpwrlist or { }
+ local off = tonumber(iw.txpower_offset) or 0
+ local new = { }
+ local prev = -1
+ local _, val
+ for _, val in ipairs(list) do
+ local dbm = val.dbm + off
+ local mw = math.floor(10 ^ (dbm / 10))
+ if mw ~= prev then
+ prev = mw
+ new[#new+1] = {
+ display_dbm = dbm,
+ display_mw = mw,
+ driver_dbm = val.dbm,
+ driver_mw = val.mw
+ }
+ end
+ end
+ return new
+end
-m.uci:foreach("wireless", "wifi-iface",
- function(s)
- if s.device == arg[1] and not iw then
- iw = luci.sys.wifi.getiwinfo(s.ifname or s.device)
- tx_powers = iw.txpwrlist or { }
+local function txpower_current(pwr, list)
+ pwr = tonumber(pwr)
+ if pwr ~= nil then
+ local _, item
+ for _, item in ipairs(list) do
+ if item.driver_dbm >= pwr then
+ return item.driver_dbm
+ end
end
- end)
+ end
+ return (list[#list] and list[#list].driver_dbm) or pwr or 0
+end
-s = m:section(NamedSection, arg[1], "wifi-device", translate("Device Configuration"))
+local iw = luci.sys.wifi.getiwinfo(arg[1])
+local hw_modes = iw.hwmodelist or { }
+local tx_power_list = txpower_list(iw)
+local tx_power_cur = txpower_current(wdev:get("txpower"), tx_power_list)
+
+s = m:section(NamedSection, wdev:name(), "wifi-device", translate("Device Configuration"))
s.addremove = false
s:tab("general", translate("General Setup"))
back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
]]
-en = s:taboption("general", Flag, "disabled", translate("enable"))
-en.enabled = "0"
-en.disabled = "1"
-en.rmempty = false
+st = s:taboption("general", DummyValue, "__status", translate("Status"))
+st.template = "admin_network/wifi_status"
+st.ifname = arg[1]
+
+en = s:taboption("general", Button, "__toggle")
-function en.cfgvalue(self, section)
- return Flag.cfgvalue(self, section) or "0"
+if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
+ en.title = translate("Wireless network is disabled")
+ en.inputtitle = translate("Enable")
+ en.inputstyle = "apply"
+else
+ en.title = translate("Wireless network is enabled")
+ en.inputtitle = translate("Disable")
+ en.inputstyle = "reset"
end
-s:taboption("general", DummyValue, "type", translate("Type"))
-local hwtype = m:get(arg[1], "type")
--- NanoFoo
-local nsantenna = m:get(arg[1], "antenna")
+local hwtype = wdev:get("type")
-ch = s:taboption("general", Value, "channel", translate("Channel"))
-ch:value("auto", translate("auto"))
-for _, f in ipairs(luci.sys.wifi.channels()) do
- ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
+-- NanoFoo
+local nsantenna = wdev:get("antenna")
+
+-- Check whether there is a client interface on the same radio,
+-- if yes, lock the channel choice as the station will dicatate the freq
+local has_sta = nil
+local _, net
+for _, net in ipairs(wdev:get_wifinets()) do
+ if net:mode() == "sta" and net:id() ~= wnet:id() then
+ has_sta = net
+ break
+ end
end
+if has_sta then
+ ch = s:taboption("general", DummyValue, "choice", translate("Channel"))
+ ch.value = translatef("Locked to channel %d used by %s",
+ has_sta:channel(), has_sta:shortname())
+else
+ ch = s:taboption("general", Value, "channel", translate("Channel"))
+ ch:value("auto", translate("auto"))
+ for _, f in ipairs(iw and iw.freqlist or { }) do
+ if not f.restricted then
+ ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
+ end
+ end
+end
------------------- MAC80211 Device ------------------
if hwtype == "mac80211" then
- tp = s:taboption("general",
- (tx_powers and #tx_powers > 0) and ListValue or Value,
- "txpower", translate("Transmit Power"), "dBm")
+ if #tx_power_list > 1 then
+ tp = s:taboption("general", ListValue,
+ "txpower", translate("Transmit Power"), "dBm")
+ tp.rmempty = true
+ tp.default = tx_power_cur
+ function tp.cfgvalue(...)
+ return txpower_current(Value.cfgvalue(...), tx_power_list)
+ end
- tp.rmempty = true
- for _, p in ipairs(iw and iw.txpwrlist or {}) do
- tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
+ for _, p in ipairs(tx_power_list) do
+ tp:value(p.driver_dbm, "%i dBm (%i mW)"
+ %{ p.display_dbm, p.display_mw })
+ end
+ end
+
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Band"))
+
+ if hw_modes.n then
+ if hw_modes.g then mode:value("11g", "2.4GHz (802.11g+n)") end
+ if hw_modes.a then mode:value("11a", "5GHz (802.11a+n)") end
+
+ htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode (802.11n)"))
+ htmode:value("", translate("disabled"))
+ htmode:value("HT20", "20MHz")
+ htmode:value("HT40", "40MHz")
+
+ function mode.cfgvalue(...)
+ local v = Value.cfgvalue(...)
+ if v == "11na" then
+ return "11a"
+ elseif v == "11ng" then
+ return "11g"
+ end
+ return v
+ end
+
+ noscan = s:taboption("advanced", Flag, "noscan", translate("Force 40MHz mode"),
+ translate("Always use 40MHz channels even if the secondary channel overlaps. Using this option does not comply with IEEE 802.11n-2009!"))
+ noscan:depends("htmode", "HT40")
+ noscan.default = noscan.disabled
+ else
+ if hw_modes.g then mode:value("11g", "2.4GHz (802.11g)") end
+ if hw_modes.a then mode:value("11a", "5GHz (802.11a)") end
+ end
+
+ local cl = iw and iw.countrylist
+ if cl and #cl > 0 then
+ cc = s:taboption("advanced", ListValue, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
+ cc.default = tostring(iw and iw.country or "00")
+ for _, c in ipairs(cl) do
+ cc:value(c.alpha2, "%s - %s" %{ c.alpha2, c.name })
+ end
+ else
+ s:taboption("advanced", Value, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
end
+
+ s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
+ translate("Distance to farthest network member in meters."))
+
+ -- external antenna profiles
+ local eal = iw and iw.extant
+ if eal and #eal > 0 then
+ ea = s:taboption("advanced", ListValue, "extant", translate("Antenna Configuration"))
+ for _, eap in ipairs(eal) do
+ ea:value(eap.id, "%s (%s)" %{ eap.name, eap.description })
+ if eap.selected then
+ ea.default = eap.id
+ end
+ end
+ end
+
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
end
if hwtype == "atheros" then
tp = s:taboption("general",
- (#tx_powers > 0) and ListValue or Value,
+ (#tx_power_list > 0) and ListValue or Value,
"txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
- for _, p in ipairs(iw.txpwrlist) do
- tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
+ tp.default = tx_power_cur
+
+ function tp.cfgvalue(...)
+ return txpower_current(Value.cfgvalue(...), tx_power_list)
+ end
+
+ for _, p in ipairs(tx_power_list) do
+ tp:value(p.driver_dbm, "%i dBm (%i mW)"
+ %{ p.display_dbm, p.display_mw })
end
mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
mode:value("", translate("auto"))
- mode:value("11b", "802.11b")
- mode:value("11g", "802.11g")
- mode:value("11a", "802.11a")
- mode:value("11bg", "802.11b+g")
- mode:value("11gst", "802.11g + Turbo")
- mode:value("11ast", "802.11a + Turbo")
+ if hw_modes.b then mode:value("11b", "802.11b") end
+ if hw_modes.g then mode:value("11g", "802.11g") end
+ if hw_modes.a then mode:value("11a", "802.11a") end
+ if hw_modes.g then mode:value("11bg", "802.11b+g") end
+ if hw_modes.g then mode:value("11gst", "802.11g + Turbo") end
+ if hw_modes.a then mode:value("11ast", "802.11a + Turbo") end
mode:value("fh", translate("Frequency Hopping"))
s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
if hwtype == "broadcom" then
tp = s:taboption("general",
- (#tx_powers > 0) and ListValue or Value,
+ (#tx_power_list > 0) and ListValue or Value,
"txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
- for _, p in ipairs(iw.txpwrlist) do
- tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
- end
+ tp.default = tx_power_cur
- mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("allow", translate("Allow listed only"))
- mp:value("deny", translate("Allow all except listed"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml:depends({macfilter="allow"})
- ml:depends({macfilter="deny"})
+ function tp.cfgvalue(...)
+ return txpower_current(Value.cfgvalue(...), tx_power_list)
+ end
+
+ for _, p in ipairs(tx_power_list) do
+ tp:value(p.driver_dbm, "%i dBm (%i mW)"
+ %{ p.display_dbm, p.display_mw })
+ end
+
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+ mode:value("11bg", "802.11b+g")
+ mode:value("11b", "802.11b")
+ mode:value("11g", "802.11g")
+ mode:value("11gst", "802.11g + Turbo")
ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
ant1.widget = "radio"
----------------------- Interface -----------------------
-local wnet = ww:get_network(arg[2])
-
-if wnet then
- s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
- ifsection = s
- s.addremove = false
- s.anonymous = true
- s.defaults.device = arg[1]
-
- s:tab("general", translate("General Setup"))
- s:tab("encryption", translate("Wireless Security"))
- s:tab("macfilter", translate("MAC-Filter"))
- s:tab("advanced", translate("Advanced Settings"))
-
- s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
-
- mode = s:taboption("general", ListValue, "mode", translate("Mode"))
- mode.override_values = true
- mode:value("ap", translate("Access Point"))
- mode:value("sta", translate("Client"))
- mode:value("adhoc", translate("Ad-Hoc"))
-
- bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
-
- network = s:taboption("general", Value, "network", translate("Network"),
- translate("Choose the network you want to attach to this wireless interface. " ..
- "Select <em>unspecified</em> to not attach any network or fill out the " ..
- "<em>create</em> field to define a new network."))
-
- network.rmempty = true
- network.template = "cbi/network_netlist"
- network.widget = "radio"
-
- function network.write(self, section, value)
- local i = nw:get_interface(section)
- if i then
- if value == '-' then
- value = m:formvalue(self:cbid(section) .. ".newnet")
- if value and #value > 0 then
- local n = nw:add_network(value, {type="bridge", proto="none"})
- if n then n:add_interface(i) end
- else
- local n = i:get_network()
- if n then n:del_interface(i) end
- end
+s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
+ifsection = s
+s.addremove = false
+s.anonymous = true
+s.defaults.device = wdev:name()
+
+s:tab("general", translate("General Setup"))
+s:tab("encryption", translate("Wireless Security"))
+s:tab("macfilter", translate("MAC-Filter"))
+s:tab("advanced", translate("Advanced Settings"))
+
+s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+
+mode = s:taboption("general", ListValue, "mode", translate("Mode"))
+mode.override_values = true
+mode:value("ap", translate("Access Point"))
+mode:value("sta", translate("Client"))
+mode:value("adhoc", translate("Ad-Hoc"))
+
+bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
+
+network = s:taboption("general", Value, "network", translate("Network"),
+ translate("Choose the network(s) you want to attach to this wireless interface or " ..
+ "fill out the <em>create</em> field to define a new network."))
+
+network.rmempty = true
+network.template = "cbi/network_netlist"
+network.widget = "checkbox"
+network.novirtual = true
+
+function network.write(self, section, value)
+ local i = nw:get_interface(section)
+ if i then
+ if value == '-' then
+ value = m:formvalue(self:cbid(section) .. ".newnet")
+ if value and #value > 0 then
+ local n = nw:add_network(value, {proto="none"})
+ if n then n:add_interface(i) end
else
- local n = nw:get_network(value)
+ local n = i:get_network()
+ if n then n:del_interface(i) end
+ end
+ else
+ local v
+ for _, v in ipairs(i:get_networks()) do
+ v:del_interface(i)
+ end
+ for v in ut.imatch(value) do
+ local n = nw:get_network(v)
if n then
- n:type("bridge")
+ if not n:is_empty() then
+ n:set("type", "bridge")
+ end
n:add_interface(i)
end
end
end
end
+end
+
+-------------------- MAC80211 Interface ----------------------
+
+if hwtype == "mac80211" then
+ if fs.access("/usr/sbin/iw") then
+ mode:value("mesh", "802.11s")
+ end
+
+ mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+ mode:value("monitor", translate("Monitor"))
+ bssid:depends({mode="adhoc"})
+ bssid:depends({mode="sta"})
+ bssid:depends({mode="sta-wds"})
- -------------------- MAC80211 Interface ----------------------
+ mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
+ mp:depends({mode="ap"})
+ mp:depends({mode="ap-wds"})
+ mp:value("", translate("disable"))
+ mp:value("allow", translate("Allow listed only"))
+ mp:value("deny", translate("Allow all except listed"))
- if hwtype == "mac80211" then
- if fs.access("/usr/sbin/iw") then
- mode:value("mesh", "802.11s")
+ ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
+ ml.datatype = "macaddr"
+ ml:depends({macfilter="allow"})
+ ml:depends({macfilter="deny"})
+ nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
+
+ mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
+ mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
+
+ function mode.write(self, section, value)
+ if value == "ap-wds" then
+ ListValue.write(self, section, "ap")
+ m.uci:set("wireless", section, "wds", 1)
+ elseif value == "sta-wds" then
+ ListValue.write(self, section, "sta")
+ m.uci:set("wireless", section, "wds", 1)
+ else
+ ListValue.write(self, section, value)
+ m.uci:delete("wireless", section, "wds")
end
+ end
- mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
- mode:value("monitor", translate("Monitor"))
- bssid:depends({mode="adhoc"})
+ function mode.cfgvalue(self, section)
+ local mode = ListValue.cfgvalue(self, section)
+ local wds = m.uci:get("wireless", section, "wds") == "1"
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+ if mode == "ap" and wds then
+ return "ap-wds"
+ elseif mode == "sta" and wds then
+ return "sta-wds"
+ else
+ return mode
+ end
end
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="ap-wds"})
+ wmm = s:taboption("general", Flag, "wmm", translate("WMM Mode"))
+ wmm:depends({mode="ap"})
+ wmm:depends({mode="ap-wds"})
+ wmm.default = wmm.enabled
+end
- -------------------- Madwifi Interface ----------------------
- if hwtype == "atheros" then
- mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
- mode:value("monitor", translate("Monitor"))
- mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
- mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
- mode:value("wds", translate("Static WDS"))
- function mode.write(self, section, value)
- if value == "ap-wds" then
- ListValue.write(self, section, "ap")
- m.uci:set("wireless", section, "wds", 1)
- elseif value == "sta-wds" then
- ListValue.write(self, section, "sta")
- m.uci:set("wireless", section, "wds", 1)
- else
- ListValue.write(self, section, value)
- m.uci:delete("wireless", section, "wds")
- end
+-------------------- Madwifi Interface ----------------------
+
+if hwtype == "atheros" then
+ mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+ mode:value("monitor", translate("Monitor"))
+ mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
+ mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
+ mode:value("wds", translate("Static WDS"))
+
+ function mode.write(self, section, value)
+ if value == "ap-wds" then
+ ListValue.write(self, section, "ap")
+ m.uci:set("wireless", section, "wds", 1)
+ elseif value == "sta-wds" then
+ ListValue.write(self, section, "sta")
+ m.uci:set("wireless", section, "wds", 1)
+ else
+ ListValue.write(self, section, value)
+ m.uci:delete("wireless", section, "wds")
end
+ end
- function mode.cfgvalue(self, section)
- local mode = ListValue.cfgvalue(self, section)
- local wds = m.uci:get("wireless", section, "wds") == "1"
+ function mode.cfgvalue(self, section)
+ local mode = ListValue.cfgvalue(self, section)
+ local wds = m.uci:get("wireless", section, "wds") == "1"
- if mode == "ap" and wds then
- return "ap-wds"
- elseif mode == "sta" and wds then
- return "sta-wds"
- else
- return mode
- end
+ if mode == "ap" and wds then
+ return "ap-wds"
+ elseif mode == "sta" and wds then
+ return "sta-wds"
+ else
+ return mode
end
-
- bssid:depends({mode="adhoc"})
- bssid:depends({mode="ahdemo"})
- bssid:depends({mode="wds"})
-
- wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
- wdssep:depends({mode="ap-wds"})
-
- s:taboption("advanced", Flag, "doth", "802.11h")
- hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="ap-wds"})
- hidden:depends({mode="sta-wds"})
- isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
- translate("Prevents client-to-client communication"))
- isolate:depends({mode="ap"})
- s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
-
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("deny", translate("Allow listed only"))
- mp:value("allow", translate("Allow all except listed"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml:depends({macpolicy="allow"})
- ml:depends({macpolicy="deny"})
-
- s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
- s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
- s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
- s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
- s:taboption("advanced", Flag, "compression", translate("Compression"))
-
- s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
- s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
- s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
-
- s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
- s:taboption("advanced", Flag, "xr", translate("XR Support"))
- s:taboption("advanced", Flag, "ar", translate("AR Support"))
-
- local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
- swm:depends({mode="adhoc"})
-
- local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
- nos:depends({mode="sta"})
- nos:depends({mode="sta-wds"})
-
- local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
- probereq.enabled = "0"
- probereq.disabled = "1"
end
+ bssid:depends({mode="adhoc"})
+ bssid:depends({mode="ahdemo"})
+ bssid:depends({mode="wds"})
+
+ wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
+ wdssep:depends({mode="ap-wds"})
+
+ s:taboption("advanced", Flag, "doth", "802.11h")
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="ap-wds"})
+ hidden:depends({mode="sta-wds"})
+ isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
+ translate("Prevents client-to-client communication"))
+ isolate:depends({mode="ap"})
+ s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
+
+ mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
+ mp:value("", translate("disable"))
+ mp:value("allow", translate("Allow listed only"))
+ mp:value("deny", translate("Allow all except listed"))
- -------------------- Broadcom Interface ----------------------
+ ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
+ ml.datatype = "macaddr"
+ ml:depends({macpolicy="allow"})
+ ml:depends({macpolicy="deny"})
+ nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
+
+ s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+ s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+ s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
+ s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
+ s:taboption("advanced", Flag, "compression", translate("Compression"))
+
+ s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
+ s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
+ s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
+
+ s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+ s:taboption("advanced", Flag, "xr", translate("XR Support"))
+ s:taboption("advanced", Flag, "ar", translate("AR Support"))
+
+ local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
+ swm:depends({mode="adhoc"})
+
+ local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
+ nos:depends({mode="sta"})
+ nos:depends({mode="sta-wds"})
+
+ local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
+ probereq.enabled = "0"
+ probereq.disabled = "1"
+end
- if hwtype == "broadcom" then
- mode:value("wds", translate("WDS"))
- mode:value("monitor", translate("Monitor"))
- hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="wds"})
+-------------------- Broadcom Interface ----------------------
- isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
- translate("Prevents client-to-client communication"))
- isolate:depends({mode="ap"})
+if hwtype == "broadcom" then
+ mode:value("wds", translate("WDS"))
+ mode:value("monitor", translate("Monitor"))
- s:taboption("advanced", Flag, "doth", "802.11h")
- s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="wds"})
- bssid:depends({mode="wds"})
- bssid:depends({mode="adhoc"})
- end
+ isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
+ translate("Prevents client-to-client communication"))
+ isolate:depends({mode="ap"})
+
+ s:taboption("advanced", Flag, "doth", "802.11h")
+ s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+
+ bssid:depends({mode="wds"})
+ bssid:depends({mode="adhoc"})
+end
+
+
+----------------------- HostAP Interface ---------------------
+
+if hwtype == "prism2" then
+ mode:value("wds", translate("WDS"))
+ mode:value("monitor", translate("Monitor"))
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="wds"})
- ----------------------- HostAP Interface ---------------------
+ bssid:depends({mode="sta"})
+
+ mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
+ mp:value("", translate("disable"))
+ mp:value("allow", translate("Allow listed only"))
+ mp:value("deny", translate("Allow all except listed"))
+ ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
+ ml:depends({macpolicy="allow"})
+ ml:depends({macpolicy="deny"})
+ nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
- if hwtype == "prism2" then
- mode:value("wds", translate("WDS"))
- mode:value("monitor", translate("Monitor"))
+ s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+end
- hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="wds"})
- bssid:depends({mode="sta"})
+------------------- WiFI-Encryption -------------------
+
+encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
+encr.override_values = true
+encr.override_depends = true
+encr:depends({mode="ap"})
+encr:depends({mode="sta"})
+encr:depends({mode="adhoc"})
+encr:depends({mode="ahdemo"})
+encr:depends({mode="ap-wds"})
+encr:depends({mode="sta-wds"})
+encr:depends({mode="mesh"})
+
+cipher = s:taboption("encryption", ListValue, "cipher", translate("Cipher"))
+cipher:depends({encryption="wpa"})
+cipher:depends({encryption="wpa2"})
+cipher:depends({encryption="psk"})
+cipher:depends({encryption="psk2"})
+cipher:depends({encryption="wpa-mixed"})
+cipher:depends({encryption="psk-mixed"})
+cipher:value("auto", translate("auto"))
+cipher:value("ccmp", translate("Force CCMP (AES)"))
+cipher:value("tkip", translate("Force TKIP"))
+cipher:value("tkip+ccmp", translate("Force TKIP and CCMP (AES)"))
+
+function encr.cfgvalue(self, section)
+ local v = tostring(ListValue.cfgvalue(self, section))
+ if v == "wep" then
+ return "wep-open"
+ elseif v and v:match("%+") then
+ return (v:gsub("%+.+$", ""))
+ end
+ return v
+end
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("deny", translate("Allow listed only"))
- mp:value("allow", translate("Allow all except listed"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml:depends({macpolicy="allow"})
- ml:depends({macpolicy="deny"})
+function encr.write(self, section, value)
+ local e = tostring(encr:formvalue(section))
+ local c = tostring(cipher:formvalue(section))
+ if value == "wpa" or value == "wpa2" then
+ self.map.uci:delete("wireless", section, "key")
+ end
+ if e and (c == "tkip" or c == "ccmp" or c == "tkip+ccmp") then
+ e = e .. "+" .. c
+ end
+ self.map:set(section, "encryption", e)
+end
- s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+function cipher.cfgvalue(self, section)
+ local v = tostring(ListValue.cfgvalue(encr, section))
+ if v and v:match("%+") then
+ v = v:gsub("^[^%+]+%+", "")
+ if v == "aes" then v = "ccmp"
+ elseif v == "tkip+aes" then v = "tkip+ccmp"
+ elseif v == "aes+tkip" then v = "tkip+ccmp"
+ elseif v == "ccmp+tkip" then v = "tkip+ccmp"
+ end
end
+ return v
+end
+function cipher.write(self, section)
+ return encr:write(section)
+end
- ------------------- WiFI-Encryption -------------------
- encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
- encr.override_values = true
- encr.override_depends = true
- encr:depends({mode="ap"})
- encr:depends({mode="sta"})
- encr:depends({mode="adhoc"})
- encr:depends({mode="ahdemo"})
- encr:depends({mode="ap-wds"})
- encr:depends({mode="sta-wds"})
- encr:depends({mode="mesh"})
+encr:value("none", "No Encryption")
+encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
+encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
- encr:value("none", "No Encryption")
- encr:value("wep", "WEP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+ local supplicant = fs.access("/usr/sbin/wpa_supplicant")
+ local hostapd = fs.access("/usr/sbin/hostapd")
- if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- local supplicant = fs.access("/usr/sbin/wpa_supplicant")
- local hostapd = fs.access("/usr/sbin/hostapd")
+ -- Probe EAP support
+ local has_ap_eap = (os.execute("hostapd -veap >/dev/null 2>/dev/null") == 0)
+ local has_sta_eap = (os.execute("wpa_supplicant -veap >/dev/null 2>/dev/null") == 0)
- if hostapd and supplicant then
- encr:value("psk", "WPA-PSK")
- encr:value("psk2", "WPA2-PSK")
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
+ if hostapd and supplicant then
+ encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ if has_ap_eap and has_sta_eap then
encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"})
- elseif hostapd and not supplicant then
- encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
- encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
+ encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ end
+ elseif hostapd and not supplicant then
+ encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"})
+ encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"})
+ if has_ap_eap then
encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
- elseif not hostapd and supplicant then
- encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
- encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
+ end
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
+ elseif not hostapd and supplicant then
+ encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
+ encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
+ if has_sta_eap then
encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
- else
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
end
- elseif hwtype == "broadcom" then
- encr:value("psk", "WPA-PSK")
- encr:value("psk2", "WPA2-PSK")
- encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
+ else
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
+ end
+elseif hwtype == "broadcom" then
+ encr:value("psk", "WPA-PSK")
+ encr:value("psk2", "WPA2-PSK")
+ encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
+end
+
+auth_server = s:taboption("encryption", Value, "auth_server", translate("Radius-Authentication-Server"))
+auth_server:depends({mode="ap", encryption="wpa"})
+auth_server:depends({mode="ap", encryption="wpa2"})
+auth_server:depends({mode="ap-wds", encryption="wpa"})
+auth_server:depends({mode="ap-wds", encryption="wpa2"})
+auth_server.rmempty = true
+auth_server.datatype = "host"
+
+auth_port = s:taboption("encryption", Value, "auth_port", translate("Radius-Authentication-Port"), translatef("Default %d", 1812))
+auth_port:depends({mode="ap", encryption="wpa"})
+auth_port:depends({mode="ap", encryption="wpa2"})
+auth_port:depends({mode="ap-wds", encryption="wpa"})
+auth_port:depends({mode="ap-wds", encryption="wpa2"})
+auth_port.rmempty = true
+auth_port.datatype = "port"
+
+auth_secret = s:taboption("encryption", Value, "auth_secret", translate("Radius-Authentication-Secret"))
+auth_secret:depends({mode="ap", encryption="wpa"})
+auth_secret:depends({mode="ap", encryption="wpa2"})
+auth_secret:depends({mode="ap-wds", encryption="wpa"})
+auth_secret:depends({mode="ap-wds", encryption="wpa2"})
+auth_secret.rmempty = true
+auth_secret.password = true
+
+acct_server = s:taboption("encryption", Value, "acct_server", translate("Radius-Accounting-Server"))
+acct_server:depends({mode="ap", encryption="wpa"})
+acct_server:depends({mode="ap", encryption="wpa2"})
+acct_server:depends({mode="ap-wds", encryption="wpa"})
+acct_server:depends({mode="ap-wds", encryption="wpa2"})
+acct_server.rmempty = true
+acct_server.datatype = "host"
+
+acct_port = s:taboption("encryption", Value, "acct_port", translate("Radius-Accounting-Port"), translatef("Default %d", 1813))
+acct_port:depends({mode="ap", encryption="wpa"})
+acct_port:depends({mode="ap", encryption="wpa2"})
+acct_port:depends({mode="ap-wds", encryption="wpa"})
+acct_port:depends({mode="ap-wds", encryption="wpa2"})
+acct_port.rmempty = true
+acct_port.datatype = "port"
+
+acct_secret = s:taboption("encryption", Value, "acct_secret", translate("Radius-Accounting-Secret"))
+acct_secret:depends({mode="ap", encryption="wpa"})
+acct_secret:depends({mode="ap", encryption="wpa2"})
+acct_secret:depends({mode="ap-wds", encryption="wpa"})
+acct_secret:depends({mode="ap-wds", encryption="wpa2"})
+acct_secret.rmempty = true
+acct_secret.password = true
+
+wpakey = s:taboption("encryption", Value, "_wpa_key", translate("Key"))
+wpakey:depends("encryption", "psk")
+wpakey:depends("encryption", "psk2")
+wpakey:depends("encryption", "psk+psk2")
+wpakey:depends("encryption", "psk-mixed")
+wpakey.datatype = "wpakey"
+wpakey.rmempty = true
+wpakey.password = true
+
+wpakey.cfgvalue = function(self, section, value)
+ local key = m.uci:get("wireless", section, "key")
+ if key == "1" or key == "2" or key == "3" or key == "4" then
+ return nil
end
+ return key
+end
+
+wpakey.write = function(self, section, value)
+ self.map.uci:set("wireless", section, "key", value)
+ self.map.uci:delete("wireless", section, "key1")
+end
+
+
+wepslot = s:taboption("encryption", ListValue, "_wep_key", translate("Used Key Slot"))
+wepslot:depends("encryption", "wep-open")
+wepslot:depends("encryption", "wep-shared")
+wepslot:value("1", translatef("Key #%d", 1))
+wepslot:value("2", translatef("Key #%d", 2))
+wepslot:value("3", translatef("Key #%d", 3))
+wepslot:value("4", translatef("Key #%d", 4))
- encr:depends("mode", "ap")
- encr:depends("mode", "sta")
- encr:depends("mode", "ap-wds")
- encr:depends("mode", "sta-wds")
- encr:depends("mode", "wds")
-
- server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
- server:depends({mode="ap", encryption="wpa"})
- server:depends({mode="ap", encryption="wpa2"})
- server.rmempty = true
-
- port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
- port:depends({mode="ap", encryption="wpa"})
- port:depends({mode="ap", encryption="wpa2"})
- port.rmempty = true
-
- key = s:taboption("encryption", Value, "key", translate("Key"))
- key:depends("encryption", "wep")
- key:depends("encryption", "psk")
- key:depends("encryption", "psk2")
- key:depends("encryption", "psk+psk2")
- key:depends("encryption", "psk-mixed")
- key:depends({mode="ap", encryption="wpa"})
- key:depends({mode="ap", encryption="wpa2"})
- key.rmempty = true
- key.password = true
-
- if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
- nasid:depends({mode="ap", encryption="wpa"})
- nasid:depends({mode="ap", encryption="wpa2"})
- nasid.rmempty = true
-
- eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
- eaptype:value("TLS")
- eaptype:value("TTLS")
- eaptype:value("PEAP")
- eaptype:depends({mode="sta", encryption="wpa"})
- eaptype:depends({mode="sta", encryption="wpa2"})
-
- cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
- cacert:depends({mode="sta", encryption="wpa"})
- cacert:depends({mode="sta", encryption="wpa2"})
-
- privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
- privkey:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
- privkey:depends({mode="sta", eap_type="TLS", encryption="wpa"})
-
- privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
- privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
- privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa"})
-
-
- auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
- auth:value("PAP")
- auth:value("CHAP")
- auth:value("MSCHAP")
- auth:value("MSCHAPV2")
- auth:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
- auth:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
- auth:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
- auth:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
-
-
- identity = s:taboption("encryption", Value, "identity", translate("Identity"))
- identity:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
- identity:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
- identity:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
- identity:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
-
- password = s:taboption("encryption", Value, "password", translate("Password"))
- password:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
- password:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
- password:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
- password:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
+wepslot.cfgvalue = function(self, section)
+ local slot = tonumber(m.uci:get("wireless", section, "key"))
+ if not slot or slot < 1 or slot > 4 then
+ return 1
end
+ return slot
+end
+
+wepslot.write = function(self, section, value)
+ self.map.uci:set("wireless", section, "key", value)
+end
+
+local slot
+for slot=1,4 do
+ wepkey = s:taboption("encryption", Value, "key" .. slot, translatef("Key #%d", slot))
+ wepkey:depends("encryption", "wep-open")
+ wepkey:depends("encryption", "wep-shared")
+ wepkey.datatype = "wepkey"
+ wepkey.rmempty = true
+ wepkey.password = true
+
+ function wepkey.write(self, section, value)
+ if value and (#value == 5 or #value == 13) then
+ value = "s:" .. value
+ end
+ return Value.write(self, section, value)
+ end
+end
+
+
+if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+ nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
+ nasid:depends({mode="ap", encryption="wpa"})
+ nasid:depends({mode="ap", encryption="wpa2"})
+ nasid:depends({mode="ap-wds", encryption="wpa"})
+ nasid:depends({mode="ap-wds", encryption="wpa2"})
+ nasid.rmempty = true
+
+ eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
+ eaptype:value("tls", "TLS")
+ eaptype:value("ttls", "TTLS")
+ eaptype:value("peap", "PEAP")
+ eaptype:depends({mode="sta", encryption="wpa"})
+ eaptype:depends({mode="sta", encryption="wpa2"})
+ eaptype:depends({mode="sta-wds", encryption="wpa"})
+ eaptype:depends({mode="sta-wds", encryption="wpa2"})
+
+ cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
+ cacert:depends({mode="sta", encryption="wpa"})
+ cacert:depends({mode="sta", encryption="wpa2"})
+ cacert:depends({mode="sta-wds", encryption="wpa"})
+ cacert:depends({mode="sta-wds", encryption="wpa2"})
+
+ clientcert = s:taboption("encryption", FileUpload, "client_cert", translate("Path to Client-Certificate"))
+ clientcert:depends({mode="sta", encryption="wpa"})
+ clientcert:depends({mode="sta", encryption="wpa2"})
+ clientcert:depends({mode="sta-wds", encryption="wpa"})
+ clientcert:depends({mode="sta-wds", encryption="wpa2"})
+
+ privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
+ privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
+ privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
+ privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
+
+ privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
+ privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
+ privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
+ privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
+
+
+ auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
+ auth:value("PAP")
+ auth:value("CHAP")
+ auth:value("MSCHAP")
+ auth:value("MSCHAPV2")
+ auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
+ auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
+ auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
+ auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
+
+
+ identity = s:taboption("encryption", Value, "identity", translate("Identity"))
+ identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
+ identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
+ identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
+ identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
+
+ password = s:taboption("encryption", Value, "password", translate("Password"))
+ password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ password:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ password:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
+ password:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
+ password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
+ password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
end
return m
projects / project / luci.git / blobdiff