ocserv: added proxy arp option

[project/luci.git] / applications / luci-app-ocserv / luasrc / model / cbi / ocserv / main.lua

diff --git a/applications/luci-app-ocserv/luasrc/model/cbi/ocserv/main.lua b/applications/luci-app-ocserv/luasrc/model/cbi/ocserv/main.lua
index d87d126..74edaf4 100644 (file)
--- a/applications/luci-app-ocserv/luasrc/model/cbi/ocserv/main.lua
+++ b/applications/luci-app-ocserv/luasrc/model/cbi/ocserv/main.lua
@@ -96,22 +96,6 @@ local cisco = s:taboption("general", Flag, "cisco_compat", translate("AnyConnect
        translate("Enable support for CISCO AnyConnect clients"))
 cisco.default = "1"
 
-ipaddr = s:taboption("general", Value, "ipaddr", translate("VPN <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Network-Address"))
-ipaddr.datatype = "ip4addr"
-ipaddr.default = "192.168.100.1"
-
-nm = s:taboption("general", Value, "netmask", translate("VPN <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"))
-nm.datatype = "ip4addr"
-nm.default = "255.255.255.0"
-nm:value("255.255.255.0")
-nm:value("255.255.0.0")
-nm:value("255.0.0.0")
-
-if has_ipv6 then
-       ip6addr = s:taboption("general", Value, "ip6addr", translate("VPN <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Network-Address"), translate("<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/prefix"))
-       ip6addr.datatype = "ip6addr"
-end
-
 
 tmpl = s:taboption("template", Value, "_tmpl",
        translate("Edit the template that is used for generating the ocserv configuration."))
@@ -138,10 +122,36 @@ function ca.cfgvalue(self, section)
        return nixio.fs.readfile("/etc/ocserv/ca.pem")
 end
 
+--[[Networking options]]--
+
+local parp = s:taboption("general", Flag, "proxy_arp", translate("Enable proxy arp"),
+       translate("Provide addresses to clients from a subnet of LAN; if enabled the network below must be a subnet of LAN. Note that the first address of the specified subnet will be reserved by ocserv, so it should not be in use. If you have a network in LAN covering 192.168.1.0/24 use 192.168.1.192/26 to reserve the upper 62 addresses."))
+parp.default = "0"
+
+ipaddr = s:taboption("general", Value, "ipaddr", translate("VPN <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Network-Address"),
+        translate("The IPv4 subnet address to provide to clients; this should be some private network different than the LAN addresses unless proxy ARP is enabled. Leave empty to attempt auto-configuration."))
+ipaddr.datatype = "ip4addr"
+ipaddr.default = "192.168.100.1"
+
+nm = s:taboption("general", Value, "netmask", translate("VPN <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"),
+        translate("The mask of the subnet above."))
+nm.datatype = "ip4addr"
+nm.default = "255.255.255.0"
+nm:value("255.255.255.0")
+nm:value("255.255.0.0")
+nm:value("255.0.0.0")
+
+if has_ipv6 then
+       ip6addr = s:taboption("general", Value, "ip6addr", translate("VPN <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Network-Address"), translate("<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/prefix"),
+                             translate("The IPv6 subnet address to provide to clients; leave empty to attempt auto-configuration."))
+       ip6addr.datatype = "ip6addr"
+end
+
+
 --[[DNS]]--
 
 s = m:section(TypedSection, "dns", translate("DNS servers"),
-       translate("The DNS servers to be provided to clients; can be either IPv6 or IPv4"))
+       translate("The DNS servers to be provided to clients; can be either IPv6 or IPv4. Typically you should include the address of this device"))
 s.anonymous = true
 s.addremove = true
 s.template = "cbi/tblsection"