msgid "Hotplug ifup"
msgstr "Hotplug ifup"
+msgid "INFO: MWAN not running"
+msgstr ""
+
msgid "IPset"
msgstr "IPset"
msgid "MWAN Interface Configuration - %s"
msgstr "MWAN 介面配置 - %s"
-msgid "MWAN Interface Live Status"
-msgstr "MWAN 介面實時狀態"
+msgid "MWAN Interfaces"
+msgstr ""
msgid "MWAN Member Configuration - %s"
msgstr "MWAN 成員配置 - %s"
msgid "MWAN Status - Troubleshooting"
msgstr ""
-msgid "MWAN status - Interface Live Status"
-msgstr ""
-
msgid ""
-"MWAN supports up to 250 physical and/or logical interfaces<br />MWAN "
+"MWAN supports up to 252 physical and/or logical interfaces<br />MWAN "
"requires that all interfaces have a unique metric configured in /etc/config/"
"network<br />Names must match the interface name found in /etc/config/"
-"network (see advanced tab)<br />Names may contain characters A-Z, a-z, 0-9, "
-"_ and no spaces<br />Interfaces may not share the same name as configured "
-"members, policies or rules"
+"network<br />Names may contain characters A-Z, a-z, 0-9, _ and no spaces<br /"
+">Interfaces may not share the same name as configured members, policies or "
+"rules"
msgstr ""
-"MWAN 支援最多 250 個物理或邏輯介面。<br />MWAN 要求所有介面必須在 /etc/"
+"MWAN 支援最多 252 個物理或邏輯介面。<br />MWAN 要求所有介面必須在 /etc/"
"config/network 中設定唯一的閘道器躍點。<br />名稱必須與 /etc/config/network "
-"中的介面名稱匹配。（可檢視“高階”選項卡）<br />名稱允許包括 A-Z、a-z、0-9、_ "
-"但是不能有空格。<br />介面不應該與成員、策略、規則中的任意一個設定項使用相同"
-"的名稱"
+"中的介面名稱匹配。<br />名稱允許包括 A-Z、a-z、0-9、_ 但是不能有空格。<br />"
+"介面不應該與成員、策略、規則中的任意一個設定項使用相同的名稱"
msgid ""
"May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or "
msgid "Online"
msgstr "線上"
-msgid "Online (tracking active)"
-msgstr "線上（跟蹤啟用中）"
-
-msgid "Online (tracking off)"
-msgstr "線上（跟蹤已關閉）"
-
msgid "Ping count"
msgstr "Ping 計數"
msgid ""
"Policies are profiles grouping one or more members controlling how MWAN "
"distributes traffic<br />Member interfaces with lower metrics are used "
-"first. Interfaces with the same metric load-balance<br />Load-balanced "
-"member interfaces distribute more traffic out those with higher weights<br /"
-">Names may contain characters A-Z, a-z, 0-9, _ and no spaces. Names must be "
-"15 characters or less<br />Policies may not share the same name as "
-"configured interfaces, members or rules"
+"first<br />Member interfaces with the same metric will be load-balanced<br /"
+">Load-balanced member interfaces distribute more traffic out those with "
+"higher weights<br />Names may contain characters A-Z, a-z, 0-9, _ and no "
+"spaces<br />Names must be 15 characters or less<br />Policies may not share "
+"the same name as configured interfaces, members or rules"
msgstr ""
"“策略”把成員進行分組，告訴 MWAN 如何分配“規則”中使用這一策略的流量<br />擁有"
"較低躍點數的成員將會被優先使用。擁有相同躍點數的成員把流量進行負載均衡。<br /"
msgid "Task"
msgstr ""
-msgid "There are currently %d of 250 supported interfaces configured"
-msgstr "當前已配置 %d 個介面，最大支援 250 個"
+msgid "There are currently %d of %d supported interfaces configured"
+msgstr "當前已配置 %d 個介面，最大支援 %d 個"
msgid ""
"This displays the metric assigned to this interface in /etc/config/network"
"will<br />be executed with each netifd hotplug interface event<br />on "
"interfaces for which mwan3 is enabled.<br /><br />There are three main "
"environment variables that are passed to this script.<br /><br />$ACTION "
-"Either \"ifup\" or \"ifdown\"<br />$INTERFACE Name of the interface which "
-"went up or down (e.g. \"wan\" or \"wwan\")<br />$DEVICE Physical device name "
-"which interface went up or down (e.g. \"eth0\" or \"wwan0\")<br /><br />"
-msgstr ""
-"這裡允許您修改“/etc/mwan3.user”的內容。<br />該檔案在 sysupgrade 期間也會保"
-"留。<br /><br />注意：<br />該檔案會作為 shell 指令碼解釋。<br />指令碼的第一"
-"行必須是"#!/bin/sh"，不帶引號。<br />以#開頭的行是註釋，不會執行。"
-"<br />將您的自定義 mwan3 動作放在這裡，他們將<br />在啟用 mwan3 的介面上<br /"
-">在 netifd hotplug 介面事件時執行。<br /><br />有三個主要的環境變數傳遞給這個"
-"腳本。<br /><br />$ACTION “ifup”或“ifdown”<br />$INTERFACE 啟動或停止的介面名"
-"（例如“wan”或“wwan”）<br />$DEVICE 啟動或停止介面的物理裝置名（例"
-"如“eth0”或“wwan0”）<br /><br />"
+"<br />* \"ifup\" Is called by netifd and mwan3track <br />* \"ifdown\" Is "
+"called by netifd and mwan3track <br />* \"connected\" Is only called by "
+"mwan3track if tracking was successful <br />* \"disconnected\" Is only "
+"called by mwan3track if tracking has failed <br />$INTERFACE Name of the "
+"interface which went up or down (e.g. \"wan\" or \"wwan\")<br />$DEVICE "
+"Physical device name which interface went up or down (e.g. \"eth0\" or "
+"\"wwan0\")<br /><br />"
+msgstr ""
msgid "Tracking hostname or IP address"
msgstr "跟蹤的主機或 IP 位址"
msgid "View the content of /etc/protocols for protocol description"
msgstr ""
-msgid "WARNING: %d interfaces are configured exceeding the maximum of 250!"
-msgstr "警告：已配置 %d 個介面，超過最大值 250！"
+msgid "WARNING: %d interfaces are configured exceeding the maximum of %d!"
+msgstr "警告：已配置 %d 個介面，超過最大值 %d！"
msgid "WARNING: Interface %s are not found in /etc/config/network"
msgstr ""
msgid "WARNING: Interface %s has no default route in the main routing table"
msgstr ""
-msgid "WARNING: Policie %s has exceeding the maximum name of 15 characters"
+msgid "WARNING: Policy %s has exceeding the maximum name of 15 characters"
msgstr ""
msgid ""
msgid "unreachable (reject)"
msgstr "不可達（拒絕）"
+#~ msgid "Online (tracking active)"
+#~ msgstr "線上（跟蹤啟用中）"
+
+#~ msgid "MWAN Interface Live Status"
+#~ msgstr "MWAN 介面實時狀態"
+
+#~ msgid "Online (tracking off)"
+#~ msgstr "線上（跟蹤已關閉）"
+
+#~ msgid ""
+#~ "This section allows you to modify the content of \"/etc/mwan3.user\".<br /"
+#~ ">The file is also preserved during sysupgrade.<br /><br />Notes:<br /"
+#~ ">This file is interpreted as a shell script.<br />The first line of the "
+#~ "script must be "#!/bin/sh" without quotes.<br />Lines beginning "
+#~ "with # are comments and are not executed.<br />Put your custom mwan3 "
+#~ "action here, they will<br />be executed with each netifd hotplug "
+#~ "interface event<br />on interfaces for which mwan3 is enabled.<br /><br /"
+#~ ">There are three main environment variables that are passed to this "
+#~ "script.<br /><br />$ACTION Either \"ifup\" or \"ifdown\"<br />$INTERFACE "
+#~ "Name of the interface which went up or down (e.g. \"wan\" or \"wwan"
+#~ "\")<br />$DEVICE Physical device name which interface went up or down (e."
+#~ "g. \"eth0\" or \"wwan0\")<br /><br />"
+#~ msgstr ""
+#~ "這裡允許您修改“/etc/mwan3.user”的內容。<br />該檔案在 sysupgrade 期間也會"
+#~ "保留。<br /><br />注意：<br />該檔案會作為 shell 指令碼解釋。<br />指令碼"
+#~ "的第一行必須是"#!/bin/sh"，不帶引號。<br />以#開頭的行是註釋，不會"
+#~ "執行。<br />將您的自定義 mwan3 動作放在這裡，他們將<br />在啟用 mwan3 的介"
+#~ "面上<br />在 netifd hotplug 介面事件時執行。<br /><br />有三個主要的環境變"
+#~ "數傳遞給這個腳本。<br /><br />$ACTION “ifup”或“ifdown”<br />$INTERFACE 啟"
+#~ "動或停止的介面名（例如“wan”或“wwan”）<br />$DEVICE 啟動或停止介面的物理裝"
+#~ "置名（例如“eth0”或“wwan0”）<br /><br />"
+
#~ msgid "Currently Configured Interfaces"
#~ msgstr "當前配置的介面"
projects / project / luci.git / blobdiff