+#~ msgid "Online (tracking off)"
+#~ msgstr "在线（跟踪已关闭）"
+
+#~ msgid ""
+#~ "This section allows you to modify the content of \"/etc/mwan3.user\".<br /"
+#~ ">The file is also preserved during sysupgrade.<br /><br />Notes:<br /"
+#~ ">This file is interpreted as a shell script.<br />The first line of the "
+#~ "script must be "#!/bin/sh" without quotes.<br />Lines beginning "
+#~ "with # are comments and are not executed.<br />Put your custom mwan3 "
+#~ "action here, they will<br />be executed with each netifd hotplug "
+#~ "interface event<br />on interfaces for which mwan3 is enabled.<br /><br /"
+#~ ">There are three main environment variables that are passed to this "
+#~ "script.<br /><br />$ACTION Either \"ifup\" or \"ifdown\"<br />$INTERFACE "
+#~ "Name of the interface which went up or down (e.g. \"wan\" or \"wwan"
+#~ "\")<br />$DEVICE Physical device name which interface went up or down (e."
+#~ "g. \"eth0\" or \"wwan0\")<br /><br />"
+#~ msgstr ""
+#~ "这里允许您修改“/etc/mwan3.user”的内容。<br />该文件在 sysupgrade 期间也会"
+#~ "保留。<br /><br />注意：<br />该文件会作为 shell 脚本解释。<br />脚本的第"
+#~ "一行必须是"#!/bin/sh"，不带引号。<br />以#开头的行是注释，不会执"
+#~ "行。<br />将您的自定义 mwan3 动作放在这里，他们将<br />在启用 mwan3 的接口"
+#~ "上<br />在 netifd hotplug 接口事件时执行。<br /><br />有三个主要的环境变量"
+#~ "传递给这个脚本。<br /><br />$ACTION “ifup”或“ifdown”<br />$INTERFACE 启动"
+#~ "或停止的接口名（例如“wan”或“wwan”）<br />$DEVICE 启动或停止接口的物理设备"
+#~ "名（例如“eth0”或“wwan0”）<br /><br />"
+
+#~ msgid "Currently Configured Interfaces"
+#~ msgstr "当前配置的接口"
+
+#~ msgid "Currently Configured Members"
+#~ msgstr "当前配置的成员"
+
+#~ msgid "Currently Configured Policies"
+#~ msgstr "当前配置的策略"
+
+#~ msgid "Detailed Status"
+#~ msgstr "详细状态"
+
+#~ msgid "Diagnostic Results"
+#~ msgstr "诊断结果"
+
+#~ msgid "Error collecting troubleshooting information"
+#~ msgstr "收集故障排除信息时出错"
+
+#~ msgid "Errors"
+#~ msgstr "错误"
+
+#~ msgid "Globals mwan3 options"
+#~ msgstr "全局 mwan3 选项"
+
+#~ msgid "Interface Status"
+#~ msgstr "接口状态"
+
+#~ msgid "Last 50 MWAN systemlog entries. Newest entries sorted at the top :"
+#~ msgstr "最近 50 条 MWAN 系统日志，最新条目排在顶部："
+
+#~ msgid "MWAN Detailed Status"
+#~ msgstr "MWAN 详细状态"
+
+#~ msgid "MWAN Interface Configuration"
+#~ msgstr "MWAN 接口配置"
+
+#~ msgid "MWAN Interface Diagnostics"
+#~ msgstr "MWAN 接口诊断"
+
+#~ msgid "MWAN Interface Systemlog"
+#~ msgstr "MWAN 接口系统日志"
+
+#~ msgid "MWAN Member Configuration"
+#~ msgstr "MWAN 成员配置"
+
+#~ msgid "MWAN Policy Configuration"
+#~ msgstr "MWAN 策略配置"
+
+#~ msgid "MWAN Rule Configuration"
+#~ msgstr "MWAN 规则配置"
+
+#~ msgid "MWAN Service Control"
+#~ msgstr "MWAN 服务控制"
+
+#~ msgid "No MWAN systemlog history found"
+#~ msgstr "没有在系统日志中找到 MWAN 历史信息"
+
+#~ msgid "No detailed status information available"
+#~ msgstr "没有状态详细信息可用"
+
+#~ msgid "No diagnostic results returned"
+#~ msgstr "没有返回诊断结果"
+
+#~ msgid "No protocol specified"
+#~ msgstr "未指定协议"
+
+#~ msgid "Restart MWAN"
+#~ msgstr "重启 MWAN"
+
+#~ msgid ""
+#~ "Rules specify which traffic will use a particular MWAN policy based on IP "
+#~ "address, port or protocol<br />Rules are matched from top to bottom. "
+#~ "Rules below a matching rule are ignored. Traffic not matching any rule is "
+#~ "routed using the main routing table<br />Traffic destined for known "
+#~ "(other than default) networks is handled by the main routing table. "
+#~ "Traffic matching a rule, but all WAN interfaces for that policy are down "
+#~ "will be blackholed<br />Names may contain characters A-Z, a-z, 0-9, _ and "
+#~ "no spaces<br />Rules may not share the same name as configured "
+#~ "interfaces, members or policies"
+#~ msgstr ""
+#~ "“规则”基于 IP 地址、协议、端口把流量划分到指定的“策略”中。<br />规则按照从"
+#~ "上到下的顺序进行匹配。除了第一条能够匹配一次通信的规则以外，其它规则将被忽"
+#~ "略。不匹配任何规则的通信将会由系统默认路由表进行。<br />来自已知的网络的转"
+#~ "发流量由系统默认路由表接手，然后 MWAN 从中匹配出相应的流量并转移到 MWAN 自"
+#~ "己的路由表。但是所有被划分到一个无法使用的策略的流量将会无法正常进行路由。"
+#~ "<br />名称允许包括A-Z、a-z、0-9、_ 但是不能有空格。<br />规则不应该与接"
+#~ "口、成员、策略中的任意一个设置项使用相同的名称"
+
+#~ msgid "Start MWAN"
+#~ msgstr "启动 MWAN"
+
+#~ msgid "Stop MWAN"
+#~ msgstr "停止 MWAN"
+
+#~ msgid "Tracking IP"
+#~ msgstr "跟踪的 IP"
+
+#~ msgid "Traffic Rules"
+#~ msgstr "流量规则"
+
+#~ msgid "Troubleshooting Data"
+#~ msgstr "故障排除数据"
+
+#~ msgid "View the contents of /etc/protocols for protocol descriptions"
+#~ msgstr "请查看 /etc/protocols 获取可选协议详情"
+
+#~ msgid ""
+#~ "WARNING: Some interfaces are configured incorrectly or not at all in /etc/"
+#~ "config/network!"
+#~ msgstr "警告：某些接口配置不正确或未配置到 /etc/config/network！"
+
+#~ msgid ""
+#~ "WARNING: Some interfaces have a higher reliability requirement than there "
+#~ "are tracking IP addresses!"
+#~ msgstr "警告：某些接口的跟踪可靠性要求大于了跟踪 IP 地址总数！"
+
+#~ msgid ""
+#~ "WARNING: Some interfaces have duplicate metrics configured in /etc/config/"
+#~ "network!"
+#~ msgstr "警告：某些接口在 /etc/config/network 中配置了相同的跃点数！"
+
+#~ msgid ""
+#~ "WARNING: Some interfaces have no default route in the main routing table!"
+#~ msgstr "警告：某些接口在主路由表中没有默认路由！"
+
+#~ msgid ""
+#~ "WARNING: Some interfaces have no metric configured in /etc/config/network!"
+#~ msgstr "警告：某些接口没有在 /etc/config/network 中配置跃点数！"
+
+#~ msgid ""
+#~ "WARNING: Some policies have names exceeding the maximum of 15 characters!"
+#~ msgstr "警告：某些策略的名称超过了 15 个字符！"
+
+#~ msgid ""
+#~ "WARNING: Some rules have a port configured with no or improper protocol "
+#~ "specified! Please configure a specific protocol!"
+#~ msgstr ""
+#~ "警告：某些规则指定了端口却没有配置或配置了不正确的协议，请重新指定协议！"
+
+#~ msgid ""
+#~ "WARNING: This and other interfaces have duplicate metrics configured in /"
+#~ "etc/config/network!"
+#~ msgstr "警告：此接口和其他接口在 /etc/config/network 中配置了相同的跃点数！"
+
+#~ msgid ""
+#~ "WARNING: This interface has a higher reliability requirement than there "
+#~ "are tracking IP addresses!"
+#~ msgstr "警告：此接口的跟踪可靠性要求大于了跟踪 IP 地址总数！"
+
+#~ msgid ""
+#~ "WARNING: This interface has no default route in the main routing table!"
+#~ msgstr "警告：此接口在主路由表中没有默认路由！"
+
+#~ msgid ""
+#~ "WARNING: This interface has no metric configured in /etc/config/network!"
+#~ msgstr "警告：此接口没有在 /etc/config/network 中配置跃点数！"
+
+#~ msgid ""
+#~ "WARNING: This interface is configured incorrectly or not at all in /etc/"
+#~ "config/network!"
+#~ msgstr "警告：此接口配置不正确或未配置到 /etc/config/network！"
+
+#~ msgid ""
+#~ "WARNING: This policy's name is %d characters exceeding the maximum of 15!"
+#~ msgstr "警告：此策略的名称具有 %d 个字符，超过了 15 个字符！"
+
+#~ msgid ""
+#~ "WARNING: This rule is incorrectly configured with no or improper protocol "
+#~ "specified! Please configure a specific protocol!"
+#~ msgstr "警告：此规则没有配置或配置了不正确的协议，请重新指定协议！"
+
+#~ msgid "Waiting for MWAN to %s..."
+#~ msgstr "等待 MWAN %s..."
+
+#~ msgid "Waiting for diagnostic results..."
+#~ msgstr "等待诊断结果..."
+
+#~ msgid "restart"
+#~ msgstr "重启"
+
+#~ msgid "start"
+#~ msgstr "启动"
+
+#~ msgid "stop"
+#~ msgstr "停止"
+
+#~ msgid "Advanced"
+#~ msgstr "高级"
+
+#~ msgid "Configuration"
+#~ msgstr "配置"
+
+#~ msgid "Hotplug Script"
+#~ msgstr "Hotplug 脚本"
+
+#~ msgid "MWAN Config"
+#~ msgstr "MWAN 配置文件"
+
+#~ msgid "Network Config"
+#~ msgstr "网络配置文件"
+
+#~ msgid "Overview"
+#~ msgstr "概况"
+
+#~ msgid "This section allows you to modify the contents of /etc/config/mwan3"
+#~ msgstr "这里允许您修改 /etc/config/mwan3 的内容"
+
+#~ msgid ""
+#~ "This section allows you to modify the contents of /etc/config/network"
+#~ msgstr "这里允许您修改 /etc/config/network 的内容"
+
+#~ msgid ""
+#~ "This section allows you to modify the contents of /etc/config/wireless"
+#~ msgstr "这里允许您修改 /etc/config/wireless 的内容"
+
+#~ msgid "Wireless Config"
+#~ msgstr "无线配置"
projects / project / luci.git / blobdiff