--[[ Copyright 2011 Iordan Iordanov This file is part of luci-pbx-voicemail. luci-pbx-voicemail is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. luci-pbx-voicemail is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with luci-pbx-voicemail. If not, see . ]]-- if nixio.fs.access("/etc/init.d/asterisk") then server = "asterisk" elseif nixio.fs.access("/etc/init.d/freeswitch") then server = "freeswitch" else server = "" end modulename = "pbx-voicemail" vmlogfile = "/tmp/last_sent_voicemail.log" m = Map (modulename, translate("Voicemail Setup"), translate("Here you can configure a global voicemail for this PBX. Since this system is \ intended to run on embedded systems like routers, there is no local storage of voicemail - \ it must be sent out by email. Therefore you need to configure an outgoing mail (SMTP) server \ (for example your ISP's, Google's, or Yahoo's SMTP server), and provide a list of \ addresses that receive recorded voicemail.")) -- Recreate the config, and restart services after changes are commited to the configuration. function m.on_after_commit(self) luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null") luci.sys.call("/etc/init.d/" .. server .. " restart 1\>/dev/null 2\>/dev/null") end ---------------------------------------------------------------------------------------------------- s = m:section(NamedSection, "global_voicemail", "voicemail", translate("Global Voicemail Setup"), translate("When you enable voicemail, you will have the opportunity to specify \ email addresses that receive recorded voicemail. You must also set up an SMTP server below.")) s.anonymous = true enable = s:option(ListValue, "enabled", translate("Enable Voicemail")) enable:value("yes", translate("Yes")) enable:value("no", translate("No")) enable.default = "no" emails = s:option(DynamicList, "global_email_addresses", translate("Email Addresses that Receive Voicemail")) emails:depends("enabled", "yes") savepath = s:option(Value, "global_save_path", translate("Local Storage Directory"), translate("You can also retain copies of voicemail messages on the device running \ your PBX. The path specified here will be created if it doesn't exist. \ Beware of limited space on embedded devices like routers, and enable this \ option only if you know what you are doing.")) savepath.optional = true if nixio.fs.access("/etc/pbx-voicemail/recordings/greeting.gsm") then m1 = s:option(DummyValue, "_m1") m1:depends("enabled", "yes") m1.default = "NOTE: Found a voicemail greeting. To check or change your voicemail greeting, dial *789 \ and the system will play back your current greeting. After that, a long beep will sound and \ you can press * in order to record a new message. Hang up to avoid recording a message. \ If you press *, a second long beep will sound, and you can record a new greeting. \ Hang up or press # to stop recording. When # is pressed the system will play back the \ new greeting." else m1 = s:option(DummyValue, "_m1") m1:depends("enabled", "yes") m1.default = "WARNING: Could not find voicemail greeting. Callers will hear only a beep before \ recording starts. To record a greeting, dial *789, and press * after the long beep. \ If you press *, a second long beep will sound, and you can record a new greeting. \ Hang up or press # to stop recording. When # is pressed the system will play back the \ new greeting." end ---------------------------------------------------------------------------------------------------- s = m:section(NamedSection, "voicemail_smtp", "voicemail", translate("Outgoing mail (SMTP) Server"), translate("In order for this PBX to send emails containing voicemail recordings, you need to \ set up an SMTP server here. Your ISP usually provides an SMTP server for that purpose. \ You can also set up a third party SMTP server such as the one provided by Google or Yahoo.")) s.anonymous = true serv = s:option(Value, "smtp_server", translate("SMTP Server Hostname or IP Address")) serv.datatype = "host(0)" port = s:option(Value, "smtp_port", translate("SMTP Port Number")) port.datatype = "port" port.default = "25" tls = s:option(ListValue, "smtp_tls", translate("Secure Connection Using TLS")) tls:value("on", translate("Yes")) tls:value("off", translate("No")) tls.default = "on" auth = s:option(ListValue, "smtp_auth", translate("SMTP Server Authentication")) auth:value("on", translate("Yes")) auth:value("off", translate("No")) auth.default = "off" user = s:option(Value, "smtp_user", translate("SMTP User Name")) user:depends("smtp_auth", "on") pwd = s:option(Value, "smtp_password", translate("SMTP Password"), translate("Your real SMTP password is not shown for your protection. It will be changed \ only when you change the value in this box.")) pwd.password = true pwd:depends("smtp_auth", "on") -- We skip reading off the saved value and return nothing. function pwd.cfgvalue(self, section) return "Password Not Displayed" end -- We check the entered value against the saved one, and only write if the entered value is -- something other than the empty string, and it differes from the saved value. function pwd.write(self, section, value) local orig_pwd = m:get(section, self.option) if value == "Password Not Displayed" then value = "" end if value and #value > 0 and orig_pwd ~= value then Value.write(self, section, value) end end ---------------------------------------------------------------------------------------------------- s = m:section(NamedSection, "voicemail_log", "voicemail", translate("Last Sent Voicemail Log")) s.anonymous = true s:option (DummyValue, "vmlog") sts = s:option(DummyValue, "_sts") sts.template = "cbi/tvalue" sts.rows = 5 function sts.cfgvalue(self, section) log = nixio.fs.readfile(vmlogfile) if log == nil or log == "" then log = "No errors or messages reported." end return log end return m