-- Copyright 2014 Nikos Mavrogiannopoulos -- Licensed to the public under the Apache License 2.0. local fs = require "nixio.fs" local has_ipv6 = fs.access("/proc/net/ipv6_route") m = Map("ocserv", translate("OpenConnect VPN")) s = m:section(TypedSection, "ocserv", "OpenConnect") s.anonymous = true s:tab("general", translate("General Settings")) s:tab("ca", translate("CA certificate")) s:tab("template", translate("Edit Template")) local e = s:taboption("general", Flag, "enable", translate("Enable server")) e.rmempty = false e.default = "1" local o_sha = s:taboption("general", DummyValue, "sha_hash", translate("Server's certificate SHA1 hash"), translate("That value should be communicated to the client to verify the server's certificate")) local o_pki = s:taboption("general", DummyValue, "pkid", translate("Server's Public Key ID"), translate("An alternative value to be communicated to the client to verify the server's certificate; this value only depends on the public key")) local fd = io.popen("/usr/bin/certtool -i --infile /etc/ocserv/server-cert.pem", "r") if fd then local ln local found_sha = false local found_pki = false local complete = 0 while complete < 2 do local ln = fd:read("*l") if not ln then break elseif ln:match("SHA%-?1 fingerprint:") then found_sha = true elseif found_sha then local hash = ln:match("([a-f0-9]+)") o_sha.default = hash and hash:upper() complete = complete + 1 found_sha = false elseif ln:match("Public Key I[Dd]:") then found_pki = true elseif found_pki then local hash = ln:match("([a-f0-9]+)") o_pki.default = hash and "sha1:" .. hash:upper() complete = complete + 1 found_pki = false end end fd:close() end function m.on_commit(map) luci.sys.call("/usr/bin/occtl reload >/dev/null 2>&1") end function e.write(self, section, value) if value == "0" then luci.sys.call("/etc/init.d/ocserv stop >/dev/null 2>&1") luci.sys.call("/etc/init.d/ocserv disable >/dev/null 2>&1") else luci.sys.call("/etc/init.d/ocserv enable >/dev/null 2>&1") luci.sys.call("/etc/init.d/ocserv restart >/dev/null 2>&1") end Flag.write(self, section, value) end local o o = s:taboption("general", ListValue, "auth", translate("User Authentication"), translate("The authentication method for the users. The simplest is plain with a single username-password pair. Use PAM modules to authenticate using another server (e.g., LDAP, Radius).")) o.rmempty = false o.default = "plain" o:value("plain") o:value("PAM") s:taboption("general", Value, "port", translate("Port"), translate("The same UDP and TCP ports will be used")) s:taboption("general", Value, "max_clients", translate("Max clients")) s:taboption("general", Value, "max_same", translate("Max same clients")) s:taboption("general", Value, "dpd", translate("Dead peer detection time (secs)")) local pip = s:taboption("general", Flag, "predictable_ips", translate("Predictable IPs"), translate("The assigned IPs will be selected deterministically")) pip.default = "1" local compr = s:taboption("general", Flag, "compression", translate("Enable compression"), translate("Enable compression")) compr.default = "0" local udp = s:taboption("general", Flag, "udp", translate("Enable UDP"), translate("Enable UDP channel support; this must be enabled unless you know what you are doing")) udp.default = "1" local cisco = s:taboption("general", Flag, "cisco_compat", translate("AnyConnect client compatibility"), translate("Enable support for CISCO AnyConnect clients")) cisco.default = "1" tmpl = s:taboption("template", Value, "_tmpl", translate("Edit the template that is used for generating the ocserv configuration.")) tmpl.template = "cbi/tvalue" tmpl.rows = 20 function tmpl.cfgvalue(self, section) return nixio.fs.readfile("/etc/ocserv/ocserv.conf.template") end function tmpl.write(self, section, value) value = value:gsub("\r\n?", "\n") nixio.fs.writefile("/etc/ocserv/ocserv.conf.template", value) end ca = s:taboption("ca", Value, "_ca", translate("View the CA certificate used by this server. You will need to save it as 'ca.pem' and import it into the clients.")) ca.template = "cbi/tvalue" ca.rows = 20 function ca.cfgvalue(self, section) return nixio.fs.readfile("/etc/ocserv/ca.pem") end --[[Networking options]]-- local parp = s:taboption("general", Flag, "proxy_arp", translate("Enable proxy arp"), translate("Provide addresses to clients from a subnet of LAN; if enabled the network below must be a subnet of LAN. Note that the first address of the specified subnet will be reserved by ocserv, so it should not be in use. If you have a network in LAN covering 192.168.1.0/24 use 192.168.1.192/26 to reserve the upper 62 addresses.")) parp.default = "0" ipaddr = s:taboption("general", Value, "ipaddr", translate("VPN IPv4-Network-Address"), translate("The IPv4 subnet address to provide to clients; this should be some private network different than the LAN addresses unless proxy ARP is enabled. Leave empty to attempt auto-configuration.")) ipaddr.datatype = "ip4addr" ipaddr.default = "192.168.100.1" nm = s:taboption("general", Value, "netmask", translate("VPN IPv4-Netmask"), translate("The mask of the subnet above.")) nm.datatype = "ip4addr" nm.default = "255.255.255.0" nm:value("255.255.255.0") nm:value("255.255.0.0") nm:value("255.0.0.0") if has_ipv6 then ip6addr = s:taboption("general", Value, "ip6addr", translate("VPN IPv6-Network-Address"), translate("CIDR-Notation: address/prefix"), translate("The IPv6 subnet address to provide to clients; leave empty to attempt auto-configuration.")) ip6addr.datatype = "ip6addr" end --[[DNS]]-- s = m:section(TypedSection, "dns", translate("DNS servers"), translate("The DNS servers to be provided to clients; can be either IPv6 or IPv4. Typically you should include the address of this device")) s.anonymous = true s.addremove = true s.template = "cbi/tblsection" s:option(Value, "ip", translate("IP Address")).rmempty = true s.datatype = "ipaddr" --[[Routes]]-- s = m:section(TypedSection, "routes", translate("Routing table"), translate("The routing table to be provided to clients; you can mix IPv4 and IPv6 routes, the server will send only the appropriate. Leave empty to set a default route")) s.anonymous = true s.addremove = true s.template = "cbi/tblsection" s:option(Value, "ip", translate("IP Address")).rmempty = true o = s:option(Value, "netmask", translate("Netmask (or IPv6-prefix)")) o.default = "255.255.255.0" o:value("255.255.255.0") o:value("255.255.0.0") o:value("255.0.0.0") return m