modules/luci-mod-admin-full/luasrc/model/cbi/admin_network/wifi.lua

   1 -- Copyright 2008 Steven Barth <steven@midlink.org>
   2 -- Licensed to the public under the Apache License 2.0.
   3
   4 local wa = require "luci.tools.webadmin"
   5 local nw = require "luci.model.network"
   6 local ut = require "luci.util"
   7 local nt = require "luci.sys".net
   8 local fs = require "nixio.fs"
   9
  10 arg[1] = arg[1] or ""
  11
  12 m = Map("wireless", "",
  13         translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
  14                 "hardware such as channel, transmit power or antenna selection which are shared among all " ..
  15                 "defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings " ..
  16                 "like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
  17
  18 m:chain("network")
  19 m:chain("firewall")
  20 m.redirect = luci.dispatcher.build_url("admin/network/wireless")
  21
  22 local ifsection
  23
  24 function m.on_commit(map)
  25         local wnet = nw:get_wifinet(arg[1])
  26         if ifsection and wnet then
  27                 ifsection.section = wnet.sid
  28                 m.title = luci.util.pcdata(wnet:get_i18n())
  29         end
  30 end
  31
  32 nw.init(m.uci)
  33
  34 local wnet = nw:get_wifinet(arg[1])
  35 local wdev = wnet and wnet:get_device()
  36
  37 -- redirect to overview page if network does not exist anymore (e.g. after a revert)
  38 if not wnet or not wdev then
  39         luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless"))
  40         return
  41 end
  42
  43 -- wireless toggle was requested, commit and reload page
  44 function m.parse(map)
  45         local new_cc = m:formvalue("cbid.wireless.%s.country" % wdev:name())
  46         local old_cc = m:get(wdev:name(), "country")
  47
  48         if m:formvalue("cbid.wireless.%s.__toggle" % wdev:name()) then
  49                 if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
  50                         wnet:set("disabled", nil)
  51                 else
  52                         wnet:set("disabled", "1")
  53                 end
  54                 wdev:set("disabled", nil)
  55
  56                 nw:commit("wireless")
  57                 luci.sys.call("(env -i /bin/ubus call network reload) >/dev/null 2>/dev/null")
  58
  59                 luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
  60                 return
  61         end
  62
  63         Map.parse(map)
  64
  65         if m:get(wdev:name(), "type") == "mac80211" and new_cc and new_cc ~= old_cc then
  66                 luci.sys.call("iw reg set %q" % new_cc)
  67                 luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
  68                 return
  69         end
  70 end
  71
  72 m.title = luci.util.pcdata(wnet:get_i18n())
  73
  74
  75 local function txpower_list(iw)
  76         local list = iw.txpwrlist or { }
  77         local off  = tonumber(iw.txpower_offset) or 0
  78         local new  = { }
  79         local prev = -1
  80         local _, val
  81         for _, val in ipairs(list) do
  82                 local dbm = val.dbm + off
  83                 local mw  = math.floor(10 ^ (dbm / 10))
  84                 if mw ~= prev then
  85                         prev = mw
  86                         new[#new+1] = {
  87                                 display_dbm = dbm,
  88                                 display_mw  = mw,
  89                                 driver_dbm  = val.dbm,
  90                                 driver_mw   = val.mw
  91                         }
  92                 end
  93         end
  94         return new
  95 end
  96
  97 local function txpower_current(pwr, list)
  98         pwr = tonumber(pwr)
  99         if pwr ~= nil then
 100                 local _, item
 101                 for _, item in ipairs(list) do
 102                         if item.driver_dbm >= pwr then
 103                                 return item.driver_dbm
 104                         end
 105                 end
 106         end
 107         return pwr or ""
 108 end
 109
 110 local iw = luci.sys.wifi.getiwinfo(arg[1])
 111 local hw_modes      = iw.hwmodelist or { }
 112 local tx_power_list = txpower_list(iw)
 113 local tx_power_cur  = txpower_current(wdev:get("txpower"), tx_power_list)
 114
 115 s = m:section(NamedSection, wdev:name(), "wifi-device", translate("Device Configuration"))
 116 s.addremove = false
 117
 118 s:tab("general", translate("General Setup"))
 119 s:tab("macfilter", translate("MAC-Filter"))
 120 s:tab("advanced", translate("Advanced Settings"))
 121
 122 --[[
 123 back = s:option(DummyValue, "_overview", translate("Overview"))
 124 back.value = ""
 125 back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
 126 ]]
 127
 128 st = s:taboption("general", DummyValue, "__status", translate("Status"))
 129 st.template = "admin_network/wifi_status"
 130 st.ifname   = arg[1]
 131
 132 en = s:taboption("general", Button, "__toggle")
 133
 134 if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
 135         en.title      = translate("Wireless network is disabled")
 136         en.inputtitle = translate("Enable")
 137         en.inputstyle = "apply"
 138 else
 139         en.title      = translate("Wireless network is enabled")
 140         en.inputtitle = translate("Disable")
 141         en.inputstyle = "reset"
 142 end
 143
 144
 145 local hwtype = wdev:get("type")
 146
 147 -- NanoFoo
 148 local nsantenna = wdev:get("antenna")
 149
 150 -- Check whether there are client interfaces on the same radio,
 151 -- if yes, lock the channel choice as these stations will dicatate the freq
 152 local found_sta = nil
 153 local _, net
 154 if wnet:mode() ~= "sta" then
 155         for _, net in ipairs(wdev:get_wifinets()) do
 156                 if net:mode() == "sta" and net:get("disabled") ~= "1" then
 157                         if not found_sta then
 158                                 found_sta = {}
 159                                 found_sta.channel = net:channel()
 160                                 found_sta.names = {}
 161                         end
 162                         found_sta.names[#found_sta.names+1] = net:shortname()
 163                 end
 164         end
 165 end
 166
 167 if found_sta then
 168         ch = s:taboption("general", DummyValue, "choice", translate("Channel"))
 169         ch.value = translatef("Locked to channel %s used by: %s",
 170                 found_sta.channel or "(auto)", table.concat(found_sta.names, ", "))
 171 else
 172         ch = s:taboption("general", Value, "_mode_freq", '<br />'..translate("Operating frequency"))
 173         ch.hwmodes = hw_modes
 174         ch.htmodes = iw.htmodelist
 175         ch.freqlist = iw.freqlist
 176         ch.template = "cbi/wireless_modefreq"
 177
 178         function ch.cfgvalue(self, section)
 179                 return {
 180                         m:get(section, "hwmode") or "",
 181                         m:get(section, "channel") or "auto",
 182                         m:get(section, "htmode") or ""
 183                 }
 184         end
 185
 186         function ch.formvalue(self, section)
 187                 return {
 188                         m:formvalue(self:cbid(section) .. ".band") or (hw_modes.g and "11g" or "11a"),
 189                         m:formvalue(self:cbid(section) .. ".channel") or "auto",
 190                         m:formvalue(self:cbid(section) .. ".htmode") or ""
 191                 }
 192         end
 193
 194         function ch.write(self, section, value)
 195                 m:set(section, "hwmode", value[1])
 196                 m:set(section, "channel", value[2])
 197                 m:set(section, "htmode", value[3])
 198         end
 199 end
 200
 201 ------------------- MAC80211 Device ------------------
 202
 203 if hwtype == "mac80211" then
 204         if #tx_power_list > 0 then
 205                 tp = s:taboption("general", ListValue,
 206                         "txpower", translate("Transmit Power"), "dBm")
 207                 tp.rmempty = true
 208                 tp.default = tx_power_cur
 209                 function tp.cfgvalue(...)
 210                         return txpower_current(Value.cfgvalue(...), tx_power_list)
 211                 end
 212
 213                 tp:value("", translate("auto"))
 214                 for _, p in ipairs(tx_power_list) do
 215                         tp:value(p.driver_dbm, "%i dBm (%i mW)"
 216                                 %{ p.display_dbm, p.display_mw })
 217                 end
 218         end
 219
 220         local cl = iw and iw.countrylist
 221         if cl and #cl > 0 then
 222                 cc = s:taboption("advanced", ListValue, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
 223                 cc.default = tostring(iw and iw.country or "00")
 224                 for _, c in ipairs(cl) do
 225                         cc:value(c.alpha2, "%s - %s" %{ c.alpha2, c.name })
 226                 end
 227         else
 228                 s:taboption("advanced", Value, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
 229         end
 230
 231         s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
 232                 translate("Distance to farthest network member in meters."))
 233
 234         -- external antenna profiles
 235         local eal = iw and iw.extant
 236         if eal and #eal > 0 then
 237                 ea = s:taboption("advanced", ListValue, "extant", translate("Antenna Configuration"))
 238                 for _, eap in ipairs(eal) do
 239                         ea:value(eap.id, "%s (%s)" %{ eap.name, eap.description })
 240                         if eap.selected then
 241                                 ea.default = eap.id
 242                         end
 243                 end
 244         end
 245
 246         s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 247         s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 248 end
 249
 250
 251 ------------------- Madwifi Device ------------------
 252
 253 if hwtype == "atheros" then
 254         tp = s:taboption("general",
 255                 (#tx_power_list > 0) and ListValue or Value,
 256                 "txpower", translate("Transmit Power"), "dBm")
 257
 258         tp.rmempty = true
 259         tp.default = tx_power_cur
 260
 261         function tp.cfgvalue(...)
 262                 return txpower_current(Value.cfgvalue(...), tx_power_list)
 263         end
 264
 265         tp:value("", translate("auto"))
 266         for _, p in ipairs(tx_power_list) do
 267                 tp:value(p.driver_dbm, "%i dBm (%i mW)"
 268                         %{ p.display_dbm, p.display_mw })
 269         end
 270
 271         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 272
 273         if not nsantenna then
 274                 ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 275                 ant1.widget = "radio"
 276                 ant1.orientation = "horizontal"
 277                 ant1:depends("diversity", "")
 278                 ant1:value("0", translate("auto"))
 279                 ant1:value("1", translate("Antenna 1"))
 280                 ant1:value("2", translate("Antenna 2"))
 281
 282                 ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 283                 ant2.widget = "radio"
 284                 ant2.orientation = "horizontal"
 285                 ant2:depends("diversity", "")
 286                 ant2:value("0", translate("auto"))
 287                 ant2:value("1", translate("Antenna 1"))
 288                 ant2:value("2", translate("Antenna 2"))
 289
 290         else -- NanoFoo
 291                 local ant = s:taboption("advanced", ListValue, "antenna", translate("Transmitter Antenna"))
 292                 ant:value("auto")
 293                 ant:value("vertical")
 294                 ant:value("horizontal")
 295                 ant:value("external")
 296         end
 297
 298         s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
 299                 translate("Distance to farthest network member in meters."))
 300         s:taboption("advanced", Value, "regdomain", translate("Regulatory Domain"))
 301         s:taboption("advanced", Value, "country", translate("Country Code"))
 302         s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
 303
 304         --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 305 end
 306
 307
 308
 309 ------------------- Broadcom Device ------------------
 310
 311 if hwtype == "broadcom" then
 312         tp = s:taboption("general",
 313                 (#tx_power_list > 0) and ListValue or Value,
 314                 "txpower", translate("Transmit Power"), "dBm")
 315
 316         tp.rmempty = true
 317         tp.default = tx_power_cur
 318
 319         function tp.cfgvalue(...)
 320                 return txpower_current(Value.cfgvalue(...), tx_power_list)
 321         end
 322
 323         tp:value("", translate("auto"))
 324         for _, p in ipairs(tx_power_list) do
 325                 tp:value(p.driver_dbm, "%i dBm (%i mW)"
 326                         %{ p.display_dbm, p.display_mw })
 327         end
 328
 329         mode = s:taboption("advanced", ListValue, "hwmode", translate("Band"))
 330         if hw_modes.b then
 331                 mode:value("11b", "2.4GHz (802.11b)")
 332                 if hw_modes.g then
 333                         mode:value("11bg", "2.4GHz (802.11b+g)")
 334                 end
 335         end
 336         if hw_modes.g then
 337                 mode:value("11g", "2.4GHz (802.11g)")
 338                 mode:value("11gst", "2.4GHz (802.11g + Turbo)")
 339                 mode:value("11lrs", "2.4GHz (802.11g Limited Rate Support)")
 340         end
 341         if hw_modes.a then mode:value("11a", "5GHz (802.11a)") end
 342         if hw_modes.n then
 343                 if hw_modes.g then
 344                         mode:value("11ng", "2.4GHz (802.11g+n)")
 345                         mode:value("11n", "2.4GHz (802.11n)")
 346                 end
 347                 if hw_modes.a then
 348                         mode:value("11na", "5GHz (802.11a+n)")
 349                         mode:value("11n", "5GHz (802.11n)")
 350                 end
 351                 htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode (802.11n)"))
 352                 htmode:depends("hwmode", "11ng")
 353                 htmode:depends("hwmode", "11na")
 354                 htmode:depends("hwmode", "11n")
 355                 htmode:value("HT20", "20MHz")
 356                 htmode:value("HT40", "40MHz")
 357         end
 358
 359         ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 360         ant1.widget = "radio"
 361         ant1:depends("diversity", "")
 362         ant1:value("3", translate("auto"))
 363         ant1:value("0", translate("Antenna 1"))
 364         ant1:value("1", translate("Antenna 2"))
 365
 366         ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 367         ant2.widget = "radio"
 368         ant2:depends("diversity", "")
 369         ant2:value("3", translate("auto"))
 370         ant2:value("0", translate("Antenna 1"))
 371         ant2:value("1", translate("Antenna 2"))
 372
 373         s:taboption("advanced", Flag, "frameburst", translate("Frame Bursting"))
 374
 375         s:taboption("advanced", Value, "distance", translate("Distance Optimization"))
 376         --s:option(Value, "slottime", translate("Slot time"))
 377
 378         s:taboption("advanced", Value, "country", translate("Country Code"))
 379         s:taboption("advanced", Value, "maxassoc", translate("Connection Limit"))
 380 end
 381
 382
 383 --------------------- HostAP Device ---------------------
 384
 385 if hwtype == "prism2" then
 386         s:taboption("advanced", Value, "txpower", translate("Transmit Power"), "att units").rmempty = true
 387
 388         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 389
 390         s:taboption("advanced", Value, "txantenna", translate("Transmitter Antenna"))
 391         s:taboption("advanced", Value, "rxantenna", translate("Receiver Antenna"))
 392 end
 393
 394
 395 ----------------------- Interface -----------------------
 396
 397 s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
 398 ifsection = s
 399 s.addremove = false
 400 s.anonymous = true
 401 s.defaults.device = wdev:name()
 402
 403 s:tab("general", translate("General Setup"))
 404 s:tab("encryption", translate("Wireless Security"))
 405 s:tab("macfilter", translate("MAC-Filter"))
 406 s:tab("advanced", translate("Advanced Settings"))
 407
 408 ssid = s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 409 ssid.datatype = "maxlength(32)"
 410
 411 mode = s:taboption("general", ListValue, "mode", translate("Mode"))
 412 mode.override_values = true
 413 mode:value("ap", translate("Access Point"))
 414 mode:value("sta", translate("Client"))
 415 mode:value("adhoc", translate("Ad-Hoc"))
 416
 417 bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
 418
 419 network = s:taboption("general", Value, "network", translate("Network"),
 420         translate("Choose the network(s) you want to attach to this wireless interface or " ..
 421                 "fill out the <em>create</em> field to define a new network."))
 422
 423 network.rmempty = true
 424 network.template = "cbi/network_netlist"
 425 network.widget = "checkbox"
 426 network.novirtual = true
 427
 428 function network.write(self, section, value)
 429         local i = nw:get_interface(section)
 430         if i then
 431                 if value == '-' then
 432                         value = m:formvalue(self:cbid(section) .. ".newnet")
 433                         if value and #value > 0 then
 434                                 local n = nw:add_network(value, {proto="none"})
 435                                 if n then n:add_interface(i) end
 436                         else
 437                                 local n = i:get_network()
 438                                 if n then n:del_interface(i) end
 439                         end
 440                 else
 441                         local v
 442                         for _, v in ipairs(i:get_networks()) do
 443                                 v:del_interface(i)
 444                         end
 445                         for v in ut.imatch(value) do
 446                                 local n = nw:get_network(v)
 447                                 if n then
 448                                         if not n:is_empty() then
 449                                                 n:set("type", "bridge")
 450                                         end
 451                                         n:add_interface(i)
 452                                 end
 453                         end
 454                 end
 455         end
 456 end
 457
 458 -------------------- MAC80211 Interface ----------------------
 459
 460 if hwtype == "mac80211" then
 461         if fs.access("/usr/sbin/iw") then
 462                 mode:value("mesh", "802.11s")
 463         end
 464
 465         mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 466         mode:value("monitor", translate("Monitor"))
 467         bssid:depends({mode="adhoc"})
 468         bssid:depends({mode="sta"})
 469         bssid:depends({mode="sta-wds"})
 470
 471         mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
 472         mp:depends({mode="ap"})
 473         mp:depends({mode="ap-wds"})
 474         mp:value("", translate("disable"))
 475         mp:value("allow", translate("Allow listed only"))
 476         mp:value("deny", translate("Allow all except listed"))
 477
 478         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 479         ml.datatype = "macaddr"
 480         ml:depends({macfilter="allow"})
 481         ml:depends({macfilter="deny"})
 482         nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
 483
 484         mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
 485         mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
 486
 487         function mode.write(self, section, value)
 488                 if value == "ap-wds" then
 489                         ListValue.write(self, section, "ap")
 490                         m.uci:set("wireless", section, "wds", 1)
 491                 elseif value == "sta-wds" then
 492                         ListValue.write(self, section, "sta")
 493                         m.uci:set("wireless", section, "wds", 1)
 494                 else
 495                         ListValue.write(self, section, value)
 496                         m.uci:delete("wireless", section, "wds")
 497                 end
 498         end
 499
 500         function mode.cfgvalue(self, section)
 501                 local mode = ListValue.cfgvalue(self, section)
 502                 local wds  = m.uci:get("wireless", section, "wds") == "1"
 503
 504                 if mode == "ap" and wds then
 505                         return "ap-wds"
 506                 elseif mode == "sta" and wds then
 507                         return "sta-wds"
 508                 else
 509                         return mode
 510                 end
 511         end
 512
 513         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 514         hidden:depends({mode="ap"})
 515         hidden:depends({mode="ap-wds"})
 516
 517         wmm = s:taboption("general", Flag, "wmm", translate("WMM Mode"))
 518         wmm:depends({mode="ap"})
 519         wmm:depends({mode="ap-wds"})
 520         wmm.default = wmm.enabled
 521
 522         ifname = s:taboption("advanced", Value, "ifname", translate("Interface name"), translate("Override default interface name"))
 523         ifname.optional = true
 524 end
 525
 526
 527
 528 -------------------- Madwifi Interface ----------------------
 529
 530 if hwtype == "atheros" then
 531         mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 532         mode:value("monitor", translate("Monitor"))
 533         mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
 534         mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
 535         mode:value("wds", translate("Static WDS"))
 536
 537         function mode.write(self, section, value)
 538                 if value == "ap-wds" then
 539                         ListValue.write(self, section, "ap")
 540                         m.uci:set("wireless", section, "wds", 1)
 541                 elseif value == "sta-wds" then
 542                         ListValue.write(self, section, "sta")
 543                         m.uci:set("wireless", section, "wds", 1)
 544                 else
 545                         ListValue.write(self, section, value)
 546                         m.uci:delete("wireless", section, "wds")
 547                 end
 548         end
 549
 550         function mode.cfgvalue(self, section)
 551                 local mode = ListValue.cfgvalue(self, section)
 552                 local wds  = m.uci:get("wireless", section, "wds") == "1"
 553
 554                 if mode == "ap" and wds then
 555                         return "ap-wds"
 556                 elseif mode == "sta" and wds then
 557                         return "sta-wds"
 558                 else
 559                         return mode
 560                 end
 561         end
 562
 563         bssid:depends({mode="adhoc"})
 564         bssid:depends({mode="ahdemo"})
 565         bssid:depends({mode="wds"})
 566
 567         wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
 568         wdssep:depends({mode="ap-wds"})
 569
 570         s:taboption("advanced", Flag, "doth", "802.11h")
 571         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 572         hidden:depends({mode="ap"})
 573         hidden:depends({mode="adhoc"})
 574         hidden:depends({mode="ap-wds"})
 575         hidden:depends({mode="sta-wds"})
 576         isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 577          translate("Prevents client-to-client communication"))
 578         isolate:depends({mode="ap"})
 579         s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
 580
 581         mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 582         mp:value("", translate("disable"))
 583         mp:value("allow", translate("Allow listed only"))
 584         mp:value("deny", translate("Allow all except listed"))
 585
 586         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 587         ml.datatype = "macaddr"
 588         ml:depends({macpolicy="allow"})
 589         ml:depends({macpolicy="deny"})
 590         nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
 591
 592         s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 593         s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
 594         s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 595         s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 596         s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
 597         s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
 598         s:taboption("advanced", Flag, "compression", translate("Compression"))
 599
 600         s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
 601         s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
 602         s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
 603
 604         s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 605         s:taboption("advanced", Flag, "xr", translate("XR Support"))
 606         s:taboption("advanced", Flag, "ar", translate("AR Support"))
 607
 608         local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
 609         swm:depends({mode="adhoc"})
 610
 611         local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 612         nos:depends({mode="sta"})
 613         nos:depends({mode="sta-wds"})
 614
 615         local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
 616         probereq.enabled  = "0"
 617         probereq.disabled = "1"
 618 end
 619
 620
 621 -------------------- Broadcom Interface ----------------------
 622
 623 if hwtype == "broadcom" then
 624         mode:value("wds", translate("WDS"))
 625         mode:value("monitor", translate("Monitor"))
 626
 627         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 628         hidden:depends({mode="ap"})
 629         hidden:depends({mode="adhoc"})
 630         hidden:depends({mode="wds"})
 631
 632         isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 633          translate("Prevents client-to-client communication"))
 634         isolate:depends({mode="ap"})
 635
 636         s:taboption("advanced", Flag, "doth", "802.11h")
 637         s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 638
 639         bssid:depends({mode="wds"})
 640         bssid:depends({mode="adhoc"})
 641 end
 642
 643
 644 ----------------------- HostAP Interface ---------------------
 645
 646 if hwtype == "prism2" then
 647         mode:value("wds", translate("WDS"))
 648         mode:value("monitor", translate("Monitor"))
 649
 650         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 651         hidden:depends({mode="ap"})
 652         hidden:depends({mode="adhoc"})
 653         hidden:depends({mode="wds"})
 654
 655         bssid:depends({mode="sta"})
 656
 657         mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 658         mp:value("", translate("disable"))
 659         mp:value("allow", translate("Allow listed only"))
 660         mp:value("deny", translate("Allow all except listed"))
 661         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 662         ml:depends({macpolicy="allow"})
 663         ml:depends({macpolicy="deny"})
 664         nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
 665
 666         s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 667         s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 668         s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 669 end
 670
 671
 672 ------------------- WiFI-Encryption -------------------
 673
 674 encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
 675 encr.override_values = true
 676 encr.override_depends = true
 677 encr:depends({mode="ap"})
 678 encr:depends({mode="sta"})
 679 encr:depends({mode="adhoc"})
 680 encr:depends({mode="ahdemo"})
 681 encr:depends({mode="ap-wds"})
 682 encr:depends({mode="sta-wds"})
 683 encr:depends({mode="mesh"})
 684
 685 cipher = s:taboption("encryption", ListValue, "cipher", translate("Cipher"))
 686 cipher:depends({encryption="wpa"})
 687 cipher:depends({encryption="wpa2"})
 688 cipher:depends({encryption="psk"})
 689 cipher:depends({encryption="psk2"})
 690 cipher:depends({encryption="wpa-mixed"})
 691 cipher:depends({encryption="psk-mixed"})
 692 cipher:value("auto", translate("auto"))
 693 cipher:value("ccmp", translate("Force CCMP (AES)"))
 694 cipher:value("tkip", translate("Force TKIP"))
 695 cipher:value("tkip+ccmp", translate("Force TKIP and CCMP (AES)"))
 696
 697 function encr.cfgvalue(self, section)
 698         local v = tostring(ListValue.cfgvalue(self, section))
 699         if v == "wep" then
 700                 return "wep-open"
 701         elseif v and v:match("%+") then
 702                 return (v:gsub("%+.+$", ""))
 703         end
 704         return v
 705 end
 706
 707 function encr.write(self, section, value)
 708         local e = tostring(encr:formvalue(section))
 709         local c = tostring(cipher:formvalue(section))
 710         if value == "wpa" or value == "wpa2"  then
 711                 self.map.uci:delete("wireless", section, "key")
 712         end
 713         if e and (c == "tkip" or c == "ccmp" or c == "tkip+ccmp") then
 714                 e = e .. "+" .. c
 715         end
 716         self.map:set(section, "encryption", e)
 717 end
 718
 719 function cipher.cfgvalue(self, section)
 720         local v = tostring(ListValue.cfgvalue(encr, section))
 721         if v and v:match("%+") then
 722                 v = v:gsub("^[^%+]+%+", "")
 723                 if v == "aes" then v = "ccmp"
 724                 elseif v == "tkip+aes" then v = "tkip+ccmp"
 725                 elseif v == "aes+tkip" then v = "tkip+ccmp"
 726                 elseif v == "ccmp+tkip" then v = "tkip+ccmp"
 727                 end
 728         end
 729         return v
 730 end
 731
 732 function cipher.write(self, section)
 733         return encr:write(section)
 734 end
 735
 736
 737 encr:value("none", "No Encryption")
 738 encr:value("wep-open",   translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
 739 encr:value("wep-shared", translate("WEP Shared Key"),  {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
 740
 741 if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 742         local supplicant = fs.access("/usr/sbin/wpa_supplicant")
 743         local hostapd = fs.access("/usr/sbin/hostapd")
 744
 745         -- Probe EAP support
 746         local has_ap_eap  = (os.execute("hostapd -veap >/dev/null 2>/dev/null") == 0)
 747         local has_sta_eap = (os.execute("wpa_supplicant -veap >/dev/null 2>/dev/null") == 0)
 748
 749         if hostapd and supplicant then
 750                 encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 751                 encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 752                 encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 753                 if has_ap_eap and has_sta_eap then
 754                         encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 755                         encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 756                 end
 757         elseif hostapd and not supplicant then
 758                 encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"})
 759                 encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"})
 760                 encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"})
 761                 if has_ap_eap then
 762                         encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
 763                         encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
 764                 end
 765                 encr.description = translate(
 766                         "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 767                         "and ad-hoc mode) to be installed."
 768                 )
 769         elseif not hostapd and supplicant then
 770                 encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
 771                 encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
 772                 encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
 773                 if has_sta_eap then
 774                         encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
 775                         encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
 776                 end
 777                 encr.description = translate(
 778                         "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 779                         "and ad-hoc mode) to be installed."
 780                 )
 781         else
 782                 encr.description = translate(
 783                         "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 784                         "and ad-hoc mode) to be installed."
 785                 )
 786         end
 787 elseif hwtype == "broadcom" then
 788         encr:value("psk", "WPA-PSK")
 789         encr:value("psk2", "WPA2-PSK")
 790         encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
 791 end
 792
 793 auth_server = s:taboption("encryption", Value, "auth_server", translate("Radius-Authentication-Server"))
 794 auth_server:depends({mode="ap", encryption="wpa"})
 795 auth_server:depends({mode="ap", encryption="wpa2"})
 796 auth_server:depends({mode="ap-wds", encryption="wpa"})
 797 auth_server:depends({mode="ap-wds", encryption="wpa2"})
 798 auth_server.rmempty = true
 799 auth_server.datatype = "host(0)"
 800
 801 auth_port = s:taboption("encryption", Value, "auth_port", translate("Radius-Authentication-Port"), translatef("Default %d", 1812))
 802 auth_port:depends({mode="ap", encryption="wpa"})
 803 auth_port:depends({mode="ap", encryption="wpa2"})
 804 auth_port:depends({mode="ap-wds", encryption="wpa"})
 805 auth_port:depends({mode="ap-wds", encryption="wpa2"})
 806 auth_port.rmempty = true
 807 auth_port.datatype = "port"
 808
 809 auth_secret = s:taboption("encryption", Value, "auth_secret", translate("Radius-Authentication-Secret"))
 810 auth_secret:depends({mode="ap", encryption="wpa"})
 811 auth_secret:depends({mode="ap", encryption="wpa2"})
 812 auth_secret:depends({mode="ap-wds", encryption="wpa"})
 813 auth_secret:depends({mode="ap-wds", encryption="wpa2"})
 814 auth_secret.rmempty = true
 815 auth_secret.password = true
 816
 817 acct_server = s:taboption("encryption", Value, "acct_server", translate("Radius-Accounting-Server"))
 818 acct_server:depends({mode="ap", encryption="wpa"})
 819 acct_server:depends({mode="ap", encryption="wpa2"})
 820 acct_server:depends({mode="ap-wds", encryption="wpa"})
 821 acct_server:depends({mode="ap-wds", encryption="wpa2"})
 822 acct_server.rmempty = true
 823 acct_server.datatype = "host(0)"
 824
 825 acct_port = s:taboption("encryption", Value, "acct_port", translate("Radius-Accounting-Port"), translatef("Default %d", 1813))
 826 acct_port:depends({mode="ap", encryption="wpa"})
 827 acct_port:depends({mode="ap", encryption="wpa2"})
 828 acct_port:depends({mode="ap-wds", encryption="wpa"})
 829 acct_port:depends({mode="ap-wds", encryption="wpa2"})
 830 acct_port.rmempty = true
 831 acct_port.datatype = "port"
 832
 833 acct_secret = s:taboption("encryption", Value, "acct_secret", translate("Radius-Accounting-Secret"))
 834 acct_secret:depends({mode="ap", encryption="wpa"})
 835 acct_secret:depends({mode="ap", encryption="wpa2"})
 836 acct_secret:depends({mode="ap-wds", encryption="wpa"})
 837 acct_secret:depends({mode="ap-wds", encryption="wpa2"})
 838 acct_secret.rmempty = true
 839 acct_secret.password = true
 840
 841 wpakey = s:taboption("encryption", Value, "_wpa_key", translate("Key"))
 842 wpakey:depends("encryption", "psk")
 843 wpakey:depends("encryption", "psk2")
 844 wpakey:depends("encryption", "psk+psk2")
 845 wpakey:depends("encryption", "psk-mixed")
 846 wpakey.datatype = "wpakey"
 847 wpakey.rmempty = true
 848 wpakey.password = true
 849
 850 wpakey.cfgvalue = function(self, section, value)
 851         local key = m.uci:get("wireless", section, "key")
 852         if key == "1" or key == "2" or key == "3" or key == "4" then
 853                 return nil
 854         end
 855         return key
 856 end
 857
 858 wpakey.write = function(self, section, value)
 859         self.map.uci:set("wireless", section, "key", value)
 860         self.map.uci:delete("wireless", section, "key1")
 861 end
 862
 863
 864 wepslot = s:taboption("encryption", ListValue, "_wep_key", translate("Used Key Slot"))
 865 wepslot:depends("encryption", "wep-open")
 866 wepslot:depends("encryption", "wep-shared")
 867 wepslot:value("1", translatef("Key #%d", 1))
 868 wepslot:value("2", translatef("Key #%d", 2))
 869 wepslot:value("3", translatef("Key #%d", 3))
 870 wepslot:value("4", translatef("Key #%d", 4))
 871
 872 wepslot.cfgvalue = function(self, section)
 873         local slot = tonumber(m.uci:get("wireless", section, "key"))
 874         if not slot or slot < 1 or slot > 4 then
 875                 return 1
 876         end
 877         return slot
 878 end
 879
 880 wepslot.write = function(self, section, value)
 881         self.map.uci:set("wireless", section, "key", value)
 882 end
 883
 884 local slot
 885 for slot=1,4 do
 886         wepkey = s:taboption("encryption", Value, "key" .. slot, translatef("Key #%d", slot))
 887         wepkey:depends("encryption", "wep-open")
 888         wepkey:depends("encryption", "wep-shared")
 889         wepkey.datatype = "wepkey"
 890         wepkey.rmempty = true
 891         wepkey.password = true
 892
 893         function wepkey.write(self, section, value)
 894                 if value and (#value == 5 or #value == 13) then
 895                         value = "s:" .. value
 896                 end
 897                 return Value.write(self, section, value)
 898         end
 899 end
 900
 901
 902 if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 903
 904         -- Probe EAP support as a proxy for determining if 802.11r support is present
 905         local has_ap_eap  = (os.execute("hostapd -veap >/dev/null 2>/dev/null") == 0)
 906
 907         ieee80211r = s:taboption("encryption", Flag, "ieee80211r",
 908                 translate("802.11r Fast Transition"),
 909                 translate("Enables fast roaming among access points that belong " ..
 910                         "to the same Mobility Domain"))
 911         ieee80211r:depends({mode="ap", encryption="wpa"})
 912         ieee80211r:depends({mode="ap", encryption="wpa2"})
 913         ieee80211r:depends({mode="ap-wds", encryption="wpa"})
 914         ieee80211r:depends({mode="ap-wds", encryption="wpa2"})
 915         if has_ap_eap then
 916                 ieee80211r:depends({mode="ap", encryption="psk"})
 917                 ieee80211r:depends({mode="ap", encryption="psk2"})
 918                 ieee80211r:depends({mode="ap", encryption="psk-mixed"})
 919         end
 920         ieee80211r.rmempty = true
 921
 922         nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"),
 923                 translate("Used for two different purposes: RADIUS NAS ID and " ..
 924                         "802.11r R0KH-ID. Not needed with normal WPA(2)-PSK."))
 925         nasid:depends({mode="ap", encryption="wpa"})
 926         nasid:depends({mode="ap", encryption="wpa2"})
 927         nasid:depends({mode="ap-wds", encryption="wpa"})
 928         nasid:depends({mode="ap-wds", encryption="wpa2"})
 929         nasid:depends({ieee80211r="1"})
 930         nasid.rmempty = true
 931
 932         mobility_domain = s:taboption("encryption", Value, "mobility_domain",
 933                         translate("Mobility Domain"),
 934                         translate("4-character hexadecimal ID"))
 935         mobility_domain:depends({ieee80211r="1"})
 936         mobility_domain.placeholder = "4f57"
 937         mobility_domain.datatype = "and(hexstring,rangelength(4,4))"
 938         mobility_domain.rmempty = true
 939
 940         r0_key_lifetime = s:taboption("encryption", Value, "r0_key_lifetime",
 941                         translate("R0 Key Lifetime"), translate("minutes"))
 942         r0_key_lifetime:depends({ieee80211r="1"})
 943         r0_key_lifetime.placeholder = "10000"
 944         r0_key_lifetime.datatype = "uinteger"
 945         r0_key_lifetime.rmempty = true
 946
 947         r1_key_holder = s:taboption("encryption", Value, "r1_key_holder",
 948                         translate("R1 Key Holder"),
 949                         translate("6-octet identifier as a hex string - no colons"))
 950         r1_key_holder:depends({ieee80211r="1"})
 951         r1_key_holder.placeholder = "00004f577274"
 952         r1_key_holder.datatype = "and(hexstring,rangelength(12,12))"
 953         r1_key_holder.rmempty = true
 954
 955         reassociation_deadline = s:taboption("encryption", Value, "reassociation_deadline",
 956                 translate("Reassociation Deadline"),
 957                 translate("time units (TUs / 1.024 ms) [1000-65535]"))
 958         reassociation_deadline:depends({ieee80211r="1"})
 959         reassociation_deadline.placeholder = "1000"
 960         reassociation_deadline.datatype = "range(1000,65535)"
 961         reassociation_deadline.rmempty = true
 962
 963         pmk_r1_push = s:taboption("encryption", Flag, "pmk_r1_push", translate("PMK R1 Push"))
 964         pmk_r1_push:depends({ieee80211r="1"})
 965         pmk_r1_push.placeholder = "0"
 966         pmk_r1_push.rmempty = true
 967
 968         r0kh = s:taboption("encryption", DynamicList, "r0kh", translate("External R0 Key Holder List"),
 969                 translate("List of R0KHs in the same Mobility Domain. " ..
 970                         "<br>Format: MAC-address,NAS-Identifier,128-bit key as hex string. " ..
 971                         "<br>This list is used to map R0KH-ID (NAS Identifier) to a destination " ..
 972                         "MAC address when requesting PMK-R1 key from the R0KH that the STA " ..
 973                         "used during the Initial Mobility Domain Association."))
 974
 975         r0kh:depends({ieee80211r="1"})
 976         r0kh.rmempty = true
 977
 978         r1kh = s:taboption("encryption", DynamicList, "r1kh", translate("External R1 Key Holder List"),
 979                 translate ("List of R1KHs in the same Mobility Domain. "..
 980                         "<br>Format: MAC-address,R1KH-ID as 6 octets with colons,128-bit key as hex string. "..
 981                         "<br>This list is used to map R1KH-ID to a destination MAC address " ..
 982                         "when sending PMK-R1 key from the R0KH. This is also the " ..
 983                         "list of authorized R1KHs in the MD that can request PMK-R1 keys."))
 984         r1kh:depends({ieee80211r="1"})
 985         r1kh.rmempty = true
 986         -- End of 802.11r options
 987
 988         eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
 989         eaptype:value("tls",  "TLS")
 990         eaptype:value("ttls", "TTLS")
 991         eaptype:value("peap", "PEAP")
 992         eaptype:value("fast", "FAST")
 993         eaptype:depends({mode="sta", encryption="wpa"})
 994         eaptype:depends({mode="sta", encryption="wpa2"})
 995         eaptype:depends({mode="sta-wds", encryption="wpa"})
 996         eaptype:depends({mode="sta-wds", encryption="wpa2"})
 997
 998         cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
 999         cacert:depends({mode="sta", encryption="wpa"})
1000         cacert:depends({mode="sta", encryption="wpa2"})
1001         cacert:depends({mode="sta-wds", encryption="wpa"})
1002         cacert:depends({mode="sta-wds", encryption="wpa2"})
1003         cacert.rmempty = true
1004
1005         clientcert = s:taboption("encryption", FileUpload, "client_cert", translate("Path to Client-Certificate"))
1006         clientcert:depends({mode="sta", eap_type="tls", encryption="wpa"})
1007         clientcert:depends({mode="sta", eap_type="tls", encryption="wpa2"})
1008         clientcert:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
1009         clientcert:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
1010
1011         privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
1012         privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
1013         privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
1014         privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
1015         privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
1016
1017         privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
1018         privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
1019         privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
1020         privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
1021         privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
1022         privkeypwd.rmempty = true
1023         privkeypwd.password = true
1024
1025         auth = s:taboption("encryption", ListValue, "auth", translate("Authentication"))
1026         auth:value("PAP", "PAP", {eap_type="ttls"})
1027         auth:value("CHAP", "CHAP", {eap_type="ttls"})
1028         auth:value("MSCHAP", "MSCHAP", {eap_type="ttls"})
1029         auth:value("MSCHAPV2", "MSCHAPv2", {eap_type="ttls"})
1030         auth:value("EAP-GTC")
1031         auth:value("EAP-MD5")
1032         auth:value("EAP-MSCHAPV2")
1033         auth:value("EAP-TLS")
1034         auth:depends({mode="sta", eap_type="fast", encryption="wpa2"})
1035         auth:depends({mode="sta", eap_type="fast", encryption="wpa"})
1036         auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
1037         auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
1038         auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
1039         auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
1040         auth:depends({mode="sta-wds", eap_type="fast", encryption="wpa2"})
1041         auth:depends({mode="sta-wds", eap_type="fast", encryption="wpa"})
1042         auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
1043         auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
1044         auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
1045         auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
1046
1047         cacert2 = s:taboption("encryption", FileUpload, "ca_cert2", translate("Path to inner CA-Certificate"))
1048         cacert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
1049         cacert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
1050         cacert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
1051         cacert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
1052
1053         clientcert2 = s:taboption("encryption", FileUpload, "client_cert2", translate("Path to inner Client-Certificate"))
1054         clientcert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
1055         clientcert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
1056         clientcert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
1057         clientcert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
1058
1059         privkey2 = s:taboption("encryption", FileUpload, "priv_key2", translate("Path to inner Private Key"))
1060         privkey2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
1061         privkey2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
1062         privkey2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
1063         privkey2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
1064
1065         privkeypwd2 = s:taboption("encryption", Value, "priv_key2_pwd", translate("Password of inner Private Key"))
1066         privkeypwd2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
1067         privkeypwd2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
1068         privkeypwd2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
1069         privkeypwd2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
1070         privkeypwd2.rmempty = true
1071         privkeypwd2.password = true
1072
1073         identity = s:taboption("encryption", Value, "identity", translate("Identity"))
1074         identity:depends({mode="sta", eap_type="fast", encryption="wpa2"})
1075         identity:depends({mode="sta", eap_type="fast", encryption="wpa"})
1076         identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
1077         identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
1078         identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
1079         identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
1080         identity:depends({mode="sta-wds", eap_type="fast", encryption="wpa2"})
1081         identity:depends({mode="sta-wds", eap_type="fast", encryption="wpa"})
1082         identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
1083         identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
1084         identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
1085         identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
1086         identity:depends({mode="sta", eap_type="tls", encryption="wpa2"})
1087         identity:depends({mode="sta", eap_type="tls", encryption="wpa"})
1088         identity:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
1089         identity:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
1090
1091         anonymous_identity = s:taboption("encryption", Value, "anonymous_identity", translate("Anonymous Identity"))
1092         anonymous_identity:depends({mode="sta", eap_type="fast", encryption="wpa2"})
1093         anonymous_identity:depends({mode="sta", eap_type="fast", encryption="wpa"})
1094         anonymous_identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
1095         anonymous_identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
1096         anonymous_identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
1097         anonymous_identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
1098         anonymous_identity:depends({mode="sta-wds", eap_type="fast", encryption="wpa2"})
1099         anonymous_identity:depends({mode="sta-wds", eap_type="fast", encryption="wpa"})
1100         anonymous_identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
1101         anonymous_identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
1102         anonymous_identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
1103         anonymous_identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
1104         anonymous_identity:depends({mode="sta", eap_type="tls", encryption="wpa2"})
1105         anonymous_identity:depends({mode="sta", eap_type="tls", encryption="wpa"})
1106         anonymous_identity:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
1107         anonymous_identity:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
1108
1109         password = s:taboption("encryption", Value, "password", translate("Password"))
1110         password:depends({mode="sta", eap_type="fast", encryption="wpa2"})
1111         password:depends({mode="sta", eap_type="fast", encryption="wpa"})
1112         password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
1113         password:depends({mode="sta", eap_type="peap", encryption="wpa"})
1114         password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
1115         password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
1116         password:depends({mode="sta-wds", eap_type="fast", encryption="wpa2"})
1117         password:depends({mode="sta-wds", eap_type="fast", encryption="wpa"})
1118         password:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
1119         password:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
1120         password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
1121         password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
1122         password.rmempty = true
1123         password.password = true
1124 end
1125
1126 if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
1127         local wpasupplicant = fs.access("/usr/sbin/wpa_supplicant")
1128         local hostcli = fs.access("/usr/sbin/hostapd_cli")
1129         if hostcli and wpasupplicant then
1130                 wps = s:taboption("encryption", Flag, "wps_pushbutton", translate("Enable WPS pushbutton, requires WPA(2)-PSK"))
1131                 wps.enabled = "1"
1132                 wps.disabled = "0"
1133                 wps.rmempty = false
1134                 wps:depends("encryption", "psk")
1135                 wps:depends("encryption", "psk2")
1136                 wps:depends("encryption", "psk-mixed")
1137         end
1138 end
1139
1140 return m