modules/luci-mod-admin-full/luasrc/model/cbi/admin_network/wifi.lua

   1 -- Copyright 2008 Steven Barth <steven@midlink.org>
   2 -- Licensed to the public under the Apache License 2.0.
   3
   4 local wa = require "luci.tools.webadmin"
   5 local nw = require "luci.model.network"
   6 local ut = require "luci.util"
   7 local nt = require "luci.sys".net
   8 local fs = require "nixio.fs"
   9
  10 arg[1] = arg[1] or ""
  11
  12 m = Map("wireless", "",
  13         translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
  14                 "hardware such as channel, transmit power or antenna selection which are shared among all " ..
  15                 "defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings " ..
  16                 "like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
  17
  18 m:chain("network")
  19 m:chain("firewall")
  20 m.redirect = luci.dispatcher.build_url("admin/network/wireless")
  21
  22 local ifsection
  23
  24 function m.on_commit(map)
  25         local wnet = nw:get_wifinet(arg[1])
  26         if ifsection and wnet then
  27                 ifsection.section = wnet.sid
  28                 m.title = luci.util.pcdata(wnet:get_i18n())
  29         end
  30 end
  31
  32 nw.init(m.uci)
  33
  34 local wnet = nw:get_wifinet(arg[1])
  35 local wdev = wnet and wnet:get_device()
  36
  37 -- redirect to overview page if network does not exist anymore (e.g. after a revert)
  38 if not wnet or not wdev then
  39         luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless"))
  40         return
  41 end
  42
  43 -- wireless toggle was requested, commit and reload page
  44 function m.parse(map)
  45         if m:formvalue("cbid.wireless.%s.__toggle" % wdev:name()) then
  46                 if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
  47                         wnet:set("disabled", nil)
  48                 else
  49                         wnet:set("disabled", "1")
  50                 end
  51                 wdev:set("disabled", nil)
  52
  53                 nw:commit("wireless")
  54                 luci.sys.call("(env -i /bin/ubus call network reload) >/dev/null 2>/dev/null")
  55
  56                 luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
  57                 return
  58         end
  59         Map.parse(map)
  60 end
  61
  62 m.title = luci.util.pcdata(wnet:get_i18n())
  63
  64
  65 local function txpower_list(iw)
  66         local list = iw.txpwrlist or { }
  67         local off  = tonumber(iw.txpower_offset) or 0
  68         local new  = { }
  69         local prev = -1
  70         local _, val
  71         for _, val in ipairs(list) do
  72                 local dbm = val.dbm + off
  73                 local mw  = math.floor(10 ^ (dbm / 10))
  74                 if mw ~= prev then
  75                         prev = mw
  76                         new[#new+1] = {
  77                                 display_dbm = dbm,
  78                                 display_mw  = mw,
  79                                 driver_dbm  = val.dbm,
  80                                 driver_mw   = val.mw
  81                         }
  82                 end
  83         end
  84         return new
  85 end
  86
  87 local function txpower_current(pwr, list)
  88         pwr = tonumber(pwr)
  89         if pwr ~= nil then
  90                 local _, item
  91                 for _, item in ipairs(list) do
  92                         if item.driver_dbm >= pwr then
  93                                 return item.driver_dbm
  94                         end
  95                 end
  96         end
  97         return (list[#list] and list[#list].driver_dbm) or pwr or 0
  98 end
  99
 100 local iw = luci.sys.wifi.getiwinfo(arg[1])
 101 local hw_modes      = iw.hwmodelist or { }
 102 local tx_power_list = txpower_list(iw)
 103 local tx_power_cur  = txpower_current(wdev:get("txpower"), tx_power_list)
 104
 105 s = m:section(NamedSection, wdev:name(), "wifi-device", translate("Device Configuration"))
 106 s.addremove = false
 107
 108 s:tab("general", translate("General Setup"))
 109 s:tab("macfilter", translate("MAC-Filter"))
 110 s:tab("advanced", translate("Advanced Settings"))
 111
 112 --[[
 113 back = s:option(DummyValue, "_overview", translate("Overview"))
 114 back.value = ""
 115 back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
 116 ]]
 117
 118 st = s:taboption("general", DummyValue, "__status", translate("Status"))
 119 st.template = "admin_network/wifi_status"
 120 st.ifname   = arg[1]
 121
 122 en = s:taboption("general", Button, "__toggle")
 123
 124 if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
 125         en.title      = translate("Wireless network is disabled")
 126         en.inputtitle = translate("Enable")
 127         en.inputstyle = "apply"
 128 else
 129         en.title      = translate("Wireless network is enabled")
 130         en.inputtitle = translate("Disable")
 131         en.inputstyle = "reset"
 132 end
 133
 134
 135 local hwtype = wdev:get("type")
 136
 137 -- NanoFoo
 138 local nsantenna = wdev:get("antenna")
 139
 140 -- Check whether there are client interfaces on the same radio,
 141 -- if yes, lock the channel choice as these stations will dicatate the freq
 142 local found_sta = nil
 143 local _, net
 144 if wnet:mode() ~= "sta" then
 145         for _, net in ipairs(wdev:get_wifinets()) do
 146                 if net:mode() == "sta" and net:get("disabled") ~= "1" then
 147                         if not found_sta then
 148                                 found_sta = {}
 149                                 found_sta.channel = net:channel()
 150                                 found_sta.names = {}
 151                         end
 152                         found_sta.names[#found_sta.names+1] = net:shortname()
 153                 end
 154         end
 155 end
 156
 157 if found_sta then
 158         ch = s:taboption("general", DummyValue, "choice", translate("Channel"))
 159         ch.value = translatef("Locked to channel %s used by: %s",
 160                 found_sta.channel or "(auto)", table.concat(found_sta.names, ", "))
 161 else
 162         ch = s:taboption("general", Value, "_mode_freq", '<br />'..translate("Operating frequency"))
 163         ch.hwmodes = hw_modes
 164         ch.htmodes = iw.htmodelist
 165         ch.freqlist = iw.freqlist
 166         ch.template = "cbi/wireless_modefreq"
 167
 168         function ch.cfgvalue(self, section)
 169                 return {
 170                         m:get(section, "hwmode") or "",
 171                         m:get(section, "channel") or "auto",
 172                         m:get(section, "htmode") or ""
 173                 }
 174         end
 175
 176         function ch.formvalue(self, section)
 177                 return {
 178                         m:formvalue(self:cbid(section) .. ".band") or (hw_modes.g and "11g" or "11a"),
 179                         m:formvalue(self:cbid(section) .. ".channel") or "auto",
 180                         m:formvalue(self:cbid(section) .. ".htmode") or ""
 181                 }
 182         end
 183
 184         function ch.write(self, section, value)
 185                 m:set(section, "hwmode", value[1])
 186                 m:set(section, "channel", value[2])
 187                 m:set(section, "htmode", value[3])
 188         end
 189 end
 190
 191 ------------------- MAC80211 Device ------------------
 192
 193 if hwtype == "mac80211" then
 194         if #tx_power_list > 1 then
 195                 tp = s:taboption("general", ListValue,
 196                         "txpower", translate("Transmit Power"), "dBm")
 197                 tp.rmempty = true
 198                 tp.default = tx_power_cur
 199                 function tp.cfgvalue(...)
 200                         return txpower_current(Value.cfgvalue(...), tx_power_list)
 201                 end
 202
 203                 for _, p in ipairs(tx_power_list) do
 204                         tp:value(p.driver_dbm, "%i dBm (%i mW)"
 205                                 %{ p.display_dbm, p.display_mw })
 206                 end
 207         end
 208
 209         local cl = iw and iw.countrylist
 210         if cl and #cl > 0 then
 211                 cc = s:taboption("advanced", ListValue, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
 212                 cc.default = tostring(iw and iw.country or "00")
 213                 for _, c in ipairs(cl) do
 214                         cc:value(c.alpha2, "%s - %s" %{ c.alpha2, c.name })
 215                 end
 216         else
 217                 s:taboption("advanced", Value, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
 218         end
 219
 220         s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
 221                 translate("Distance to farthest network member in meters."))
 222
 223         -- external antenna profiles
 224         local eal = iw and iw.extant
 225         if eal and #eal > 0 then
 226                 ea = s:taboption("advanced", ListValue, "extant", translate("Antenna Configuration"))
 227                 for _, eap in ipairs(eal) do
 228                         ea:value(eap.id, "%s (%s)" %{ eap.name, eap.description })
 229                         if eap.selected then
 230                                 ea.default = eap.id
 231                         end
 232                 end
 233         end
 234
 235         s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 236         s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 237 end
 238
 239
 240 ------------------- Madwifi Device ------------------
 241
 242 if hwtype == "atheros" then
 243         tp = s:taboption("general",
 244                 (#tx_power_list > 0) and ListValue or Value,
 245                 "txpower", translate("Transmit Power"), "dBm")
 246
 247         tp.rmempty = true
 248         tp.default = tx_power_cur
 249
 250         function tp.cfgvalue(...)
 251                 return txpower_current(Value.cfgvalue(...), tx_power_list)
 252         end
 253
 254         for _, p in ipairs(tx_power_list) do
 255                 tp:value(p.driver_dbm, "%i dBm (%i mW)"
 256                         %{ p.display_dbm, p.display_mw })
 257         end
 258
 259         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 260
 261         if not nsantenna then
 262                 ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 263                 ant1.widget = "radio"
 264                 ant1.orientation = "horizontal"
 265                 ant1:depends("diversity", "")
 266                 ant1:value("0", translate("auto"))
 267                 ant1:value("1", translate("Antenna 1"))
 268                 ant1:value("2", translate("Antenna 2"))
 269
 270                 ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 271                 ant2.widget = "radio"
 272                 ant2.orientation = "horizontal"
 273                 ant2:depends("diversity", "")
 274                 ant2:value("0", translate("auto"))
 275                 ant2:value("1", translate("Antenna 1"))
 276                 ant2:value("2", translate("Antenna 2"))
 277
 278         else -- NanoFoo
 279                 local ant = s:taboption("advanced", ListValue, "antenna", translate("Transmitter Antenna"))
 280                 ant:value("auto")
 281                 ant:value("vertical")
 282                 ant:value("horizontal")
 283                 ant:value("external")
 284         end
 285
 286         s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
 287                 translate("Distance to farthest network member in meters."))
 288         s:taboption("advanced", Value, "regdomain", translate("Regulatory Domain"))
 289         s:taboption("advanced", Value, "country", translate("Country Code"))
 290         s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
 291
 292         --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 293 end
 294
 295
 296
 297 ------------------- Broadcom Device ------------------
 298
 299 if hwtype == "broadcom" then
 300         tp = s:taboption("general",
 301                 (#tx_power_list > 0) and ListValue or Value,
 302                 "txpower", translate("Transmit Power"), "dBm")
 303
 304         tp.rmempty = true
 305         tp.default = tx_power_cur
 306
 307         function tp.cfgvalue(...)
 308                 return txpower_current(Value.cfgvalue(...), tx_power_list)
 309         end
 310
 311         for _, p in ipairs(tx_power_list) do
 312                 tp:value(p.driver_dbm, "%i dBm (%i mW)"
 313                         %{ p.display_dbm, p.display_mw })
 314         end
 315
 316         mode = s:taboption("advanced", ListValue, "hwmode", translate("Band"))
 317         if hw_modes.b then
 318                 mode:value("11b", "2.4GHz (802.11b)")
 319                 if hw_modes.g then
 320                         mode:value("11bg", "2.4GHz (802.11b+g)")
 321                 end
 322         end
 323         if hw_modes.g then
 324                 mode:value("11g", "2.4GHz (802.11g)")
 325                 mode:value("11gst", "2.4GHz (802.11g + Turbo)")
 326                 mode:value("11lrs", "2.4GHz (802.11g Limited Rate Support)")
 327         end
 328         if hw_modes.a then mode:value("11a", "5GHz (802.11a)") end
 329         if hw_modes.n then
 330                 if hw_modes.g then
 331                         mode:value("11ng", "2.4GHz (802.11g+n)")
 332                         mode:value("11n", "2.4GHz (802.11n)")
 333                 end
 334                 if hw_modes.a then
 335                         mode:value("11na", "5GHz (802.11a+n)")
 336                         mode:value("11n", "5GHz (802.11n)")
 337                 end
 338                 htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode (802.11n)"))
 339                 htmode:depends("hwmode", "11ng")
 340                 htmode:depends("hwmode", "11na")
 341                 htmode:depends("hwmode", "11n")
 342                 htmode:value("HT20", "20MHz")
 343                 htmode:value("HT40", "40MHz")
 344         end
 345
 346         ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 347         ant1.widget = "radio"
 348         ant1:depends("diversity", "")
 349         ant1:value("3", translate("auto"))
 350         ant1:value("0", translate("Antenna 1"))
 351         ant1:value("1", translate("Antenna 2"))
 352
 353         ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 354         ant2.widget = "radio"
 355         ant2:depends("diversity", "")
 356         ant2:value("3", translate("auto"))
 357         ant2:value("0", translate("Antenna 1"))
 358         ant2:value("1", translate("Antenna 2"))
 359
 360         s:taboption("advanced", Flag, "frameburst", translate("Frame Bursting"))
 361
 362         s:taboption("advanced", Value, "distance", translate("Distance Optimization"))
 363         --s:option(Value, "slottime", translate("Slot time"))
 364
 365         s:taboption("advanced", Value, "country", translate("Country Code"))
 366         s:taboption("advanced", Value, "maxassoc", translate("Connection Limit"))
 367 end
 368
 369
 370 --------------------- HostAP Device ---------------------
 371
 372 if hwtype == "prism2" then
 373         s:taboption("advanced", Value, "txpower", translate("Transmit Power"), "att units").rmempty = true
 374
 375         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 376
 377         s:taboption("advanced", Value, "txantenna", translate("Transmitter Antenna"))
 378         s:taboption("advanced", Value, "rxantenna", translate("Receiver Antenna"))
 379 end
 380
 381
 382 ----------------------- Interface -----------------------
 383
 384 s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
 385 ifsection = s
 386 s.addremove = false
 387 s.anonymous = true
 388 s.defaults.device = wdev:name()
 389
 390 s:tab("general", translate("General Setup"))
 391 s:tab("encryption", translate("Wireless Security"))
 392 s:tab("macfilter", translate("MAC-Filter"))
 393 s:tab("advanced", translate("Advanced Settings"))
 394
 395 ssid = s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 396 ssid.datatype = "maxlength(32)"
 397
 398 mode = s:taboption("general", ListValue, "mode", translate("Mode"))
 399 mode.override_values = true
 400 mode:value("ap", translate("Access Point"))
 401 mode:value("sta", translate("Client"))
 402 mode:value("adhoc", translate("Ad-Hoc"))
 403
 404 bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
 405
 406 network = s:taboption("general", Value, "network", translate("Network"),
 407         translate("Choose the network(s) you want to attach to this wireless interface or " ..
 408                 "fill out the <em>create</em> field to define a new network."))
 409
 410 network.rmempty = true
 411 network.template = "cbi/network_netlist"
 412 network.widget = "checkbox"
 413 network.novirtual = true
 414
 415 function network.write(self, section, value)
 416         local i = nw:get_interface(section)
 417         if i then
 418                 if value == '-' then
 419                         value = m:formvalue(self:cbid(section) .. ".newnet")
 420                         if value and #value > 0 then
 421                                 local n = nw:add_network(value, {proto="none"})
 422                                 if n then n:add_interface(i) end
 423                         else
 424                                 local n = i:get_network()
 425                                 if n then n:del_interface(i) end
 426                         end
 427                 else
 428                         local v
 429                         for _, v in ipairs(i:get_networks()) do
 430                                 v:del_interface(i)
 431                         end
 432                         for v in ut.imatch(value) do
 433                                 local n = nw:get_network(v)
 434                                 if n then
 435                                         if not n:is_empty() then
 436                                                 n:set("type", "bridge")
 437                                         end
 438                                         n:add_interface(i)
 439                                 end
 440                         end
 441                 end
 442         end
 443 end
 444
 445 -------------------- MAC80211 Interface ----------------------
 446
 447 if hwtype == "mac80211" then
 448         if fs.access("/usr/sbin/iw") then
 449                 mode:value("mesh", "802.11s")
 450         end
 451
 452         mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 453         mode:value("monitor", translate("Monitor"))
 454         bssid:depends({mode="adhoc"})
 455         bssid:depends({mode="sta"})
 456         bssid:depends({mode="sta-wds"})
 457
 458         mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
 459         mp:depends({mode="ap"})
 460         mp:depends({mode="ap-wds"})
 461         mp:value("", translate("disable"))
 462         mp:value("allow", translate("Allow listed only"))
 463         mp:value("deny", translate("Allow all except listed"))
 464
 465         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 466         ml.datatype = "macaddr"
 467         ml:depends({macfilter="allow"})
 468         ml:depends({macfilter="deny"})
 469         nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
 470
 471         mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
 472         mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
 473
 474         function mode.write(self, section, value)
 475                 if value == "ap-wds" then
 476                         ListValue.write(self, section, "ap")
 477                         m.uci:set("wireless", section, "wds", 1)
 478                 elseif value == "sta-wds" then
 479                         ListValue.write(self, section, "sta")
 480                         m.uci:set("wireless", section, "wds", 1)
 481                 else
 482                         ListValue.write(self, section, value)
 483                         m.uci:delete("wireless", section, "wds")
 484                 end
 485         end
 486
 487         function mode.cfgvalue(self, section)
 488                 local mode = ListValue.cfgvalue(self, section)
 489                 local wds  = m.uci:get("wireless", section, "wds") == "1"
 490
 491                 if mode == "ap" and wds then
 492                         return "ap-wds"
 493                 elseif mode == "sta" and wds then
 494                         return "sta-wds"
 495                 else
 496                         return mode
 497                 end
 498         end
 499
 500         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 501         hidden:depends({mode="ap"})
 502         hidden:depends({mode="ap-wds"})
 503
 504         wmm = s:taboption("general", Flag, "wmm", translate("WMM Mode"))
 505         wmm:depends({mode="ap"})
 506         wmm:depends({mode="ap-wds"})
 507         wmm.default = wmm.enabled
 508 end
 509
 510
 511
 512 -------------------- Madwifi Interface ----------------------
 513
 514 if hwtype == "atheros" then
 515         mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 516         mode:value("monitor", translate("Monitor"))
 517         mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
 518         mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
 519         mode:value("wds", translate("Static WDS"))
 520
 521         function mode.write(self, section, value)
 522                 if value == "ap-wds" then
 523                         ListValue.write(self, section, "ap")
 524                         m.uci:set("wireless", section, "wds", 1)
 525                 elseif value == "sta-wds" then
 526                         ListValue.write(self, section, "sta")
 527                         m.uci:set("wireless", section, "wds", 1)
 528                 else
 529                         ListValue.write(self, section, value)
 530                         m.uci:delete("wireless", section, "wds")
 531                 end
 532         end
 533
 534         function mode.cfgvalue(self, section)
 535                 local mode = ListValue.cfgvalue(self, section)
 536                 local wds  = m.uci:get("wireless", section, "wds") == "1"
 537
 538                 if mode == "ap" and wds then
 539                         return "ap-wds"
 540                 elseif mode == "sta" and wds then
 541                         return "sta-wds"
 542                 else
 543                         return mode
 544                 end
 545         end
 546
 547         bssid:depends({mode="adhoc"})
 548         bssid:depends({mode="ahdemo"})
 549         bssid:depends({mode="wds"})
 550
 551         wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
 552         wdssep:depends({mode="ap-wds"})
 553
 554         s:taboption("advanced", Flag, "doth", "802.11h")
 555         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 556         hidden:depends({mode="ap"})
 557         hidden:depends({mode="adhoc"})
 558         hidden:depends({mode="ap-wds"})
 559         hidden:depends({mode="sta-wds"})
 560         isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 561          translate("Prevents client-to-client communication"))
 562         isolate:depends({mode="ap"})
 563         s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
 564
 565         mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 566         mp:value("", translate("disable"))
 567         mp:value("allow", translate("Allow listed only"))
 568         mp:value("deny", translate("Allow all except listed"))
 569
 570         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 571         ml.datatype = "macaddr"
 572         ml:depends({macpolicy="allow"})
 573         ml:depends({macpolicy="deny"})
 574         nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
 575
 576         s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 577         s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
 578         s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 579         s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 580         s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
 581         s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
 582         s:taboption("advanced", Flag, "compression", translate("Compression"))
 583
 584         s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
 585         s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
 586         s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
 587
 588         s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 589         s:taboption("advanced", Flag, "xr", translate("XR Support"))
 590         s:taboption("advanced", Flag, "ar", translate("AR Support"))
 591
 592         local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
 593         swm:depends({mode="adhoc"})
 594
 595         local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 596         nos:depends({mode="sta"})
 597         nos:depends({mode="sta-wds"})
 598
 599         local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
 600         probereq.enabled  = "0"
 601         probereq.disabled = "1"
 602 end
 603
 604
 605 -------------------- Broadcom Interface ----------------------
 606
 607 if hwtype == "broadcom" then
 608         mode:value("wds", translate("WDS"))
 609         mode:value("monitor", translate("Monitor"))
 610
 611         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 612         hidden:depends({mode="ap"})
 613         hidden:depends({mode="adhoc"})
 614         hidden:depends({mode="wds"})
 615
 616         isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 617          translate("Prevents client-to-client communication"))
 618         isolate:depends({mode="ap"})
 619
 620         s:taboption("advanced", Flag, "doth", "802.11h")
 621         s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 622
 623         bssid:depends({mode="wds"})
 624         bssid:depends({mode="adhoc"})
 625 end
 626
 627
 628 ----------------------- HostAP Interface ---------------------
 629
 630 if hwtype == "prism2" then
 631         mode:value("wds", translate("WDS"))
 632         mode:value("monitor", translate("Monitor"))
 633
 634         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 635         hidden:depends({mode="ap"})
 636         hidden:depends({mode="adhoc"})
 637         hidden:depends({mode="wds"})
 638
 639         bssid:depends({mode="sta"})
 640
 641         mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 642         mp:value("", translate("disable"))
 643         mp:value("allow", translate("Allow listed only"))
 644         mp:value("deny", translate("Allow all except listed"))
 645         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 646         ml:depends({macpolicy="allow"})
 647         ml:depends({macpolicy="deny"})
 648         nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
 649
 650         s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 651         s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 652         s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 653 end
 654
 655
 656 ------------------- WiFI-Encryption -------------------
 657
 658 encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
 659 encr.override_values = true
 660 encr.override_depends = true
 661 encr:depends({mode="ap"})
 662 encr:depends({mode="sta"})
 663 encr:depends({mode="adhoc"})
 664 encr:depends({mode="ahdemo"})
 665 encr:depends({mode="ap-wds"})
 666 encr:depends({mode="sta-wds"})
 667 encr:depends({mode="mesh"})
 668
 669 cipher = s:taboption("encryption", ListValue, "cipher", translate("Cipher"))
 670 cipher:depends({encryption="wpa"})
 671 cipher:depends({encryption="wpa2"})
 672 cipher:depends({encryption="psk"})
 673 cipher:depends({encryption="psk2"})
 674 cipher:depends({encryption="wpa-mixed"})
 675 cipher:depends({encryption="psk-mixed"})
 676 cipher:value("auto", translate("auto"))
 677 cipher:value("ccmp", translate("Force CCMP (AES)"))
 678 cipher:value("tkip", translate("Force TKIP"))
 679 cipher:value("tkip+ccmp", translate("Force TKIP and CCMP (AES)"))
 680
 681 function encr.cfgvalue(self, section)
 682         local v = tostring(ListValue.cfgvalue(self, section))
 683         if v == "wep" then
 684                 return "wep-open"
 685         elseif v and v:match("%+") then
 686                 return (v:gsub("%+.+$", ""))
 687         end
 688         return v
 689 end
 690
 691 function encr.write(self, section, value)
 692         local e = tostring(encr:formvalue(section))
 693         local c = tostring(cipher:formvalue(section))
 694         if value == "wpa" or value == "wpa2"  then
 695                 self.map.uci:delete("wireless", section, "key")
 696         end
 697         if e and (c == "tkip" or c == "ccmp" or c == "tkip+ccmp") then
 698                 e = e .. "+" .. c
 699         end
 700         self.map:set(section, "encryption", e)
 701 end
 702
 703 function cipher.cfgvalue(self, section)
 704         local v = tostring(ListValue.cfgvalue(encr, section))
 705         if v and v:match("%+") then
 706                 v = v:gsub("^[^%+]+%+", "")
 707                 if v == "aes" then v = "ccmp"
 708                 elseif v == "tkip+aes" then v = "tkip+ccmp"
 709                 elseif v == "aes+tkip" then v = "tkip+ccmp"
 710                 elseif v == "ccmp+tkip" then v = "tkip+ccmp"
 711                 end
 712         end
 713         return v
 714 end
 715
 716 function cipher.write(self, section)
 717         return encr:write(section)
 718 end
 719
 720
 721 encr:value("none", "No Encryption")
 722 encr:value("wep-open",   translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
 723 encr:value("wep-shared", translate("WEP Shared Key"),  {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
 724
 725 if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 726         local supplicant = fs.access("/usr/sbin/wpa_supplicant")
 727         local hostapd = fs.access("/usr/sbin/hostapd")
 728
 729         -- Probe EAP support
 730         local has_ap_eap  = (os.execute("hostapd -veap >/dev/null 2>/dev/null") == 0)
 731         local has_sta_eap = (os.execute("wpa_supplicant -veap >/dev/null 2>/dev/null") == 0)
 732
 733         if hostapd and supplicant then
 734                 encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 735                 encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 736                 encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 737                 if has_ap_eap and has_sta_eap then
 738                         encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 739                         encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 740                 end
 741         elseif hostapd and not supplicant then
 742                 encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"})
 743                 encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"})
 744                 encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"})
 745                 if has_ap_eap then
 746                         encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
 747                         encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
 748                 end
 749                 encr.description = translate(
 750                         "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 751                         "and ad-hoc mode) to be installed."
 752                 )
 753         elseif not hostapd and supplicant then
 754                 encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
 755                 encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
 756                 encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
 757                 if has_sta_eap then
 758                         encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
 759                         encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
 760                 end
 761                 encr.description = translate(
 762                         "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 763                         "and ad-hoc mode) to be installed."
 764                 )
 765         else
 766                 encr.description = translate(
 767                         "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 768                         "and ad-hoc mode) to be installed."
 769                 )
 770         end
 771 elseif hwtype == "broadcom" then
 772         encr:value("psk", "WPA-PSK")
 773         encr:value("psk2", "WPA2-PSK")
 774         encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
 775 end
 776
 777 auth_server = s:taboption("encryption", Value, "auth_server", translate("Radius-Authentication-Server"))
 778 auth_server:depends({mode="ap", encryption="wpa"})
 779 auth_server:depends({mode="ap", encryption="wpa2"})
 780 auth_server:depends({mode="ap-wds", encryption="wpa"})
 781 auth_server:depends({mode="ap-wds", encryption="wpa2"})
 782 auth_server.rmempty = true
 783 auth_server.datatype = "host(0)"
 784
 785 auth_port = s:taboption("encryption", Value, "auth_port", translate("Radius-Authentication-Port"), translatef("Default %d", 1812))
 786 auth_port:depends({mode="ap", encryption="wpa"})
 787 auth_port:depends({mode="ap", encryption="wpa2"})
 788 auth_port:depends({mode="ap-wds", encryption="wpa"})
 789 auth_port:depends({mode="ap-wds", encryption="wpa2"})
 790 auth_port.rmempty = true
 791 auth_port.datatype = "port"
 792
 793 auth_secret = s:taboption("encryption", Value, "auth_secret", translate("Radius-Authentication-Secret"))
 794 auth_secret:depends({mode="ap", encryption="wpa"})
 795 auth_secret:depends({mode="ap", encryption="wpa2"})
 796 auth_secret:depends({mode="ap-wds", encryption="wpa"})
 797 auth_secret:depends({mode="ap-wds", encryption="wpa2"})
 798 auth_secret.rmempty = true
 799 auth_secret.password = true
 800
 801 acct_server = s:taboption("encryption", Value, "acct_server", translate("Radius-Accounting-Server"))
 802 acct_server:depends({mode="ap", encryption="wpa"})
 803 acct_server:depends({mode="ap", encryption="wpa2"})
 804 acct_server:depends({mode="ap-wds", encryption="wpa"})
 805 acct_server:depends({mode="ap-wds", encryption="wpa2"})
 806 acct_server.rmempty = true
 807 acct_server.datatype = "host(0)"
 808
 809 acct_port = s:taboption("encryption", Value, "acct_port", translate("Radius-Accounting-Port"), translatef("Default %d", 1813))
 810 acct_port:depends({mode="ap", encryption="wpa"})
 811 acct_port:depends({mode="ap", encryption="wpa2"})
 812 acct_port:depends({mode="ap-wds", encryption="wpa"})
 813 acct_port:depends({mode="ap-wds", encryption="wpa2"})
 814 acct_port.rmempty = true
 815 acct_port.datatype = "port"
 816
 817 acct_secret = s:taboption("encryption", Value, "acct_secret", translate("Radius-Accounting-Secret"))
 818 acct_secret:depends({mode="ap", encryption="wpa"})
 819 acct_secret:depends({mode="ap", encryption="wpa2"})
 820 acct_secret:depends({mode="ap-wds", encryption="wpa"})
 821 acct_secret:depends({mode="ap-wds", encryption="wpa2"})
 822 acct_secret.rmempty = true
 823 acct_secret.password = true
 824
 825 wpakey = s:taboption("encryption", Value, "_wpa_key", translate("Key"))
 826 wpakey:depends("encryption", "psk")
 827 wpakey:depends("encryption", "psk2")
 828 wpakey:depends("encryption", "psk+psk2")
 829 wpakey:depends("encryption", "psk-mixed")
 830 wpakey.datatype = "wpakey"
 831 wpakey.rmempty = true
 832 wpakey.password = true
 833
 834 wpakey.cfgvalue = function(self, section, value)
 835         local key = m.uci:get("wireless", section, "key")
 836         if key == "1" or key == "2" or key == "3" or key == "4" then
 837                 return nil
 838         end
 839         return key
 840 end
 841
 842 wpakey.write = function(self, section, value)
 843         self.map.uci:set("wireless", section, "key", value)
 844         self.map.uci:delete("wireless", section, "key1")
 845 end
 846
 847
 848 wepslot = s:taboption("encryption", ListValue, "_wep_key", translate("Used Key Slot"))
 849 wepslot:depends("encryption", "wep-open")
 850 wepslot:depends("encryption", "wep-shared")
 851 wepslot:value("1", translatef("Key #%d", 1))
 852 wepslot:value("2", translatef("Key #%d", 2))
 853 wepslot:value("3", translatef("Key #%d", 3))
 854 wepslot:value("4", translatef("Key #%d", 4))
 855
 856 wepslot.cfgvalue = function(self, section)
 857         local slot = tonumber(m.uci:get("wireless", section, "key"))
 858         if not slot or slot < 1 or slot > 4 then
 859                 return 1
 860         end
 861         return slot
 862 end
 863
 864 wepslot.write = function(self, section, value)
 865         self.map.uci:set("wireless", section, "key", value)
 866 end
 867
 868 local slot
 869 for slot=1,4 do
 870         wepkey = s:taboption("encryption", Value, "key" .. slot, translatef("Key #%d", slot))
 871         wepkey:depends("encryption", "wep-open")
 872         wepkey:depends("encryption", "wep-shared")
 873         wepkey.datatype = "wepkey"
 874         wepkey.rmempty = true
 875         wepkey.password = true
 876
 877         function wepkey.write(self, section, value)
 878                 if value and (#value == 5 or #value == 13) then
 879                         value = "s:" .. value
 880                 end
 881                 return Value.write(self, section, value)
 882         end
 883 end
 884
 885
 886 if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 887         nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
 888         nasid:depends({mode="ap", encryption="wpa"})
 889         nasid:depends({mode="ap", encryption="wpa2"})
 890         nasid:depends({mode="ap-wds", encryption="wpa"})
 891         nasid:depends({mode="ap-wds", encryption="wpa2"})
 892         nasid.rmempty = true
 893
 894         eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
 895         eaptype:value("tls",  "TLS")
 896         eaptype:value("ttls", "TTLS")
 897         eaptype:value("peap", "PEAP")
 898         eaptype:value("fast", "FAST")
 899         eaptype:depends({mode="sta", encryption="wpa"})
 900         eaptype:depends({mode="sta", encryption="wpa2"})
 901         eaptype:depends({mode="sta-wds", encryption="wpa"})
 902         eaptype:depends({mode="sta-wds", encryption="wpa2"})
 903
 904         cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
 905         cacert:depends({mode="sta", encryption="wpa"})
 906         cacert:depends({mode="sta", encryption="wpa2"})
 907         cacert:depends({mode="sta-wds", encryption="wpa"})
 908         cacert:depends({mode="sta-wds", encryption="wpa2"})
 909         cacert.rmempty = true
 910
 911         clientcert = s:taboption("encryption", FileUpload, "client_cert", translate("Path to Client-Certificate"))
 912         clientcert:depends({mode="sta", eap_type="tls", encryption="wpa"})
 913         clientcert:depends({mode="sta", eap_type="tls", encryption="wpa2"})
 914         clientcert:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
 915         clientcert:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
 916
 917         privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
 918         privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
 919         privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
 920         privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
 921         privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
 922
 923         privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
 924         privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
 925         privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
 926         privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
 927         privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
 928         privkeypwd.rmempty = true
 929         privkeypwd.password = true
 930
 931         auth = s:taboption("encryption", ListValue, "auth", translate("Authentication"))
 932         auth:value("PAP", "PAP", {eap_type="ttls"})
 933         auth:value("CHAP", "CHAP", {eap_type="ttls"})
 934         auth:value("MSCHAP", "MSCHAP", {eap_type="ttls"})
 935         auth:value("MSCHAPV2", "MSCHAPv2", {eap_type="ttls"})
 936         auth:value("EAP-GTC")
 937         auth:value("EAP-MD5")
 938         auth:value("EAP-MSCHAPV2")
 939         auth:value("EAP-TLS")
 940         auth:depends({mode="sta", eap_type="fast", encryption="wpa2"})
 941         auth:depends({mode="sta", eap_type="fast", encryption="wpa"})
 942         auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
 943         auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
 944         auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
 945         auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
 946         auth:depends({mode="sta-wds", eap_type="fast", encryption="wpa2"})
 947         auth:depends({mode="sta-wds", eap_type="fast", encryption="wpa"})
 948         auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
 949         auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
 950         auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
 951         auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
 952
 953         cacert2 = s:taboption("encryption", FileUpload, "ca_cert2", translate("Path to inner CA-Certificate"))
 954         cacert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
 955         cacert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
 956         cacert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
 957         cacert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
 958
 959         clientcert2 = s:taboption("encryption", FileUpload, "client_cert2", translate("Path to inner Client-Certificate"))
 960         clientcert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
 961         clientcert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
 962         clientcert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
 963         clientcert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
 964
 965         privkey2 = s:taboption("encryption", FileUpload, "priv_key2", translate("Path to inner Private Key"))
 966         privkey2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
 967         privkey2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
 968         privkey2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
 969         privkey2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
 970
 971         privkeypwd2 = s:taboption("encryption", Value, "priv_key2_pwd", translate("Password of inner Private Key"))
 972         privkeypwd2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
 973         privkeypwd2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
 974         privkeypwd2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
 975         privkeypwd2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
 976         privkeypwd2.rmempty = true
 977         privkeypwd2.password = true
 978
 979         identity = s:taboption("encryption", Value, "identity", translate("Identity"))
 980         identity:depends({mode="sta", eap_type="fast", encryption="wpa2"})
 981         identity:depends({mode="sta", eap_type="fast", encryption="wpa"})
 982         identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
 983         identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
 984         identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
 985         identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
 986         identity:depends({mode="sta-wds", eap_type="fast", encryption="wpa2"})
 987         identity:depends({mode="sta-wds", eap_type="fast", encryption="wpa"})
 988         identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
 989         identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
 990         identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
 991         identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
 992         identity:depends({mode="sta", eap_type="tls", encryption="wpa2"})
 993         identity:depends({mode="sta", eap_type="tls", encryption="wpa"})
 994         identity:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
 995         identity:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
 996
 997         password = s:taboption("encryption", Value, "password", translate("Password"))
 998         password:depends({mode="sta", eap_type="fast", encryption="wpa2"})
 999         password:depends({mode="sta", eap_type="fast", encryption="wpa"})
1000         password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
1001         password:depends({mode="sta", eap_type="peap", encryption="wpa"})
1002         password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
1003         password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
1004         password:depends({mode="sta-wds", eap_type="fast", encryption="wpa2"})
1005         password:depends({mode="sta-wds", eap_type="fast", encryption="wpa"})
1006         password:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
1007         password:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
1008         password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
1009         password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
1010         password.rmempty = true
1011         password.password = true
1012 end
1013
1014 if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
1015         local wpasupplicant = fs.access("/usr/sbin/wpa_supplicant")
1016         local hostcli = fs.access("/usr/sbin/hostapd_cli")
1017         if hostcli and wpasupplicant then
1018                 wps = s:taboption("encryption", Flag, "wps_pushbutton", translate("Enable WPS pushbutton, requires WPA(2)-PSK"))
1019                 wps.enabled = "1"
1020                 wps.disabled = "0"
1021                 wps.rmempty = false
1022                 wps:depends("encryption", "psk")
1023                 wps:depends("encryption", "psk2")
1024                 wps:depends("encryption", "psk-mixed")
1025         end
1026 end
1027
1028 return m