modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua

   1 --[[
   2 LuCI - Lua Configuration Interface
   3
   4 Copyright 2008 Steven Barth <steven@midlink.org>
   5
   6 Licensed under the Apache License, Version 2.0 (the "License");
   7 you may not use this file except in compliance with the License.
   8 You may obtain a copy of the License at
   9
  10         http://www.apache.org/licenses/LICENSE-2.0
  11
  12 $Id$
  13 ]]--
  14
  15 local wa = require "luci.tools.webadmin"
  16 local nw = require "luci.model.network"
  17 local ww = require "luci.model.wireless"
  18 local fs = require "nixio.fs"
  19
  20 arg[1] = arg[1] or ""
  21 arg[2] = arg[2] or ""
  22
  23 m = Map("wireless", "",
  24         translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
  25                 "hardware such as channel, transmit power or antenna selection which is shared among all " ..
  26                 "defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings " ..
  27                 "like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
  28
  29 m:chain("network")
  30
  31 local ifsection
  32
  33 function m.on_commit(map)
  34         nw.init(map.uci)
  35         ww.init(map.uci)
  36
  37         local wnet = ww:get_network(arg[2])
  38         if ifsection and wnet then
  39                 ifsection.section = wnet.sid
  40         end
  41 end
  42
  43 nw.init(m.uci)
  44 ww.init(m.uci)
  45
  46 local wnet = ww:get_network(arg[2])
  47 m.title = wnet and ww:get_i18n(wnet) or translate("Wireless Network")
  48
  49
  50 local iw = nil
  51 local tx_powers = nil
  52
  53 m.uci:foreach("wireless", "wifi-iface",
  54         function(s)
  55                 if s.device == arg[1] and not iw then
  56                         iw = luci.sys.wifi.getiwinfo(s.ifname or s.device)
  57                         tx_powers = iw.txpwrlist or { }
  58                 end
  59         end)
  60
  61 s = m:section(NamedSection, arg[1], "wifi-device", translate("Device Configuration"))
  62 s.addremove = false
  63
  64 s:tab("general", translate("General Setup"))
  65 s:tab("macfilter", translate("MAC-Filter"))
  66 s:tab("advanced", translate("Advanced Settings"))
  67
  68 --[[
  69 back = s:option(DummyValue, "_overview", translate("Overview"))
  70 back.value = ""
  71 back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
  72 ]]
  73
  74 en = s:taboption("general", Flag, "disabled", translate("enable"))
  75 en.enabled = "0"
  76 en.disabled = "1"
  77 en.rmempty = false
  78
  79 function en.cfgvalue(self, section)
  80         return Flag.cfgvalue(self, section) or "0"
  81 end
  82
  83 s:taboption("general", DummyValue, "type", translate("Type"))
  84
  85 local hwtype = m:get(arg[1], "type")
  86 -- NanoFoo
  87 local nsantenna = m:get(arg[1], "antenna")
  88
  89 ch = s:taboption("general", Value, "channel", translate("Channel"))
  90 ch:value("auto", translate("auto"))
  91 for _, f in ipairs(luci.sys.wifi.channels()) do
  92         ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
  93 end
  94
  95
  96 ------------------- MAC80211 Device ------------------
  97
  98 if hwtype == "mac80211" then
  99         tp = s:taboption("general",
 100                 (tx_powers and #tx_powers > 0) and ListValue or Value,
 101                 "txpower", translate("Transmit Power"), "dBm")
 102
 103         tp.rmempty = true
 104         for _, p in ipairs(iw and iw.txpwrlist or {}) do
 105                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 106         end
 107 end
 108
 109
 110 ------------------- Madwifi Device ------------------
 111
 112 if hwtype == "atheros" then
 113         tp = s:taboption("general",
 114                 (#tx_powers > 0) and ListValue or Value,
 115                 "txpower", translate("Transmit Power"), "dBm")
 116
 117         tp.rmempty = true
 118         for _, p in ipairs(iw.txpwrlist) do
 119                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 120         end
 121
 122         mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
 123         mode:value("", translate("auto"))
 124         mode:value("11b", "802.11b")
 125         mode:value("11g", "802.11g")
 126         mode:value("11a", "802.11a")
 127         mode:value("11bg", "802.11b+g")
 128         mode:value("11gst", "802.11g + Turbo")
 129         mode:value("11ast", "802.11a + Turbo")
 130         mode:value("fh", translate("Frequency Hopping"))
 131
 132         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 133
 134         if not nsantenna then
 135                 ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 136                 ant1.widget = "radio"
 137                 ant1.orientation = "horizontal"
 138                 ant1:depends("diversity", "")
 139                 ant1:value("0", translate("auto"))
 140                 ant1:value("1", translate("Antenna 1"))
 141                 ant1:value("2", translate("Antenna 2"))
 142
 143                 ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 144                 ant2.widget = "radio"
 145                 ant2.orientation = "horizontal"
 146                 ant2:depends("diversity", "")
 147                 ant2:value("0", translate("auto"))
 148                 ant2:value("1", translate("Antenna 1"))
 149                 ant2:value("2", translate("Antenna 2"))
 150
 151         else -- NanoFoo
 152                 local ant = s:taboption("advanced", ListValue, "antenna", translate("Transmitter Antenna"))
 153                 ant:value("auto")
 154                 ant:value("vertical")
 155                 ant:value("horizontal")
 156                 ant:value("external")
 157         end
 158
 159         s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
 160                 translate("Distance to farthest network member in meters."))
 161         s:taboption("advanced", Value, "regdomain", translate("Regulatory Domain"))
 162         s:taboption("advanced", Value, "country", translate("Country Code"))
 163         s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
 164
 165         --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 166 end
 167
 168
 169
 170 ------------------- Broadcom Device ------------------
 171
 172 if hwtype == "broadcom" then
 173         tp = s:taboption("general",
 174                 (#tx_powers > 0) and ListValue or Value,
 175                 "txpower", translate("Transmit Power"), "dBm")
 176
 177         tp.rmempty = true
 178         for _, p in ipairs(iw.txpwrlist) do
 179                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 180         end
 181
 182         mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
 183         mp:value("", translate("disable"))
 184         mp:value("allow", translate("Allow listed only"))
 185         mp:value("deny", translate("Allow all except listed"))
 186         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 187         ml:depends({macfilter="allow"})
 188         ml:depends({macfilter="deny"})
 189
 190         ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 191         ant1.widget = "radio"
 192         ant1:depends("diversity", "")
 193         ant1:value("3", translate("auto"))
 194         ant1:value("0", translate("Antenna 1"))
 195         ant1:value("1", translate("Antenna 2"))
 196
 197         ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 198         ant2.widget = "radio"
 199         ant2:depends("diversity", "")
 200         ant2:value("3", translate("auto"))
 201         ant2:value("0", translate("Antenna 1"))
 202         ant2:value("1", translate("Antenna 2"))
 203
 204         s:taboption("advanced", Flag, "frameburst", translate("Frame Bursting"))
 205
 206         s:taboption("advanced", Value, "distance", translate("Distance Optimization"))
 207         --s:option(Value, "slottime", translate("Slot time"))
 208
 209         s:taboption("advanced", Value, "country", translate("Country Code"))
 210         s:taboption("advanced", Value, "maxassoc", translate("Connection Limit"))
 211 end
 212
 213
 214 --------------------- HostAP Device ---------------------
 215
 216 if hwtype == "prism2" then
 217         s:taboption("advanced", Value, "txpower", translate("Transmit Power"), "att units").rmempty = true
 218
 219         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 220
 221         s:taboption("advanced", Value, "txantenna", translate("Transmitter Antenna"))
 222         s:taboption("advanced", Value, "rxantenna", translate("Receiver Antenna"))
 223 end
 224
 225
 226 ----------------------- Interface -----------------------
 227
 228 local wnet = ww:get_network(arg[2])
 229
 230 if wnet then
 231         s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
 232         ifsection = s
 233         s.addremove = false
 234         s.anonymous = true
 235         s.defaults.device = arg[1]
 236
 237         s:tab("general", translate("General Setup"))
 238         s:tab("encryption", translate("Wireless Security"))
 239         s:tab("macfilter", translate("MAC-Filter"))
 240         s:tab("advanced", translate("Advanced Settings"))
 241
 242         s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 243
 244         mode = s:taboption("general", ListValue, "mode", translate("Mode"))
 245         mode.override_values = true
 246         mode:value("ap", translate("Access Point"))
 247         mode:value("sta", translate("Client"))
 248         mode:value("adhoc", translate("Ad-Hoc"))
 249
 250         bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
 251
 252         network = s:taboption("general", Value, "network", translate("Network"),
 253                 translate("Choose the network you want to attach to this wireless interface. " ..
 254                         "Select <em>unspecified</em> to not attach any network or fill out the " ..
 255                         "<em>create</em> field to define a new network."))
 256
 257         network.rmempty = true
 258         network.template = "cbi/network_netlist"
 259         network.widget = "radio"
 260
 261         function network.write(self, section, value)
 262                 local i = nw:get_interface(section)
 263                 if i then
 264                         if value == '-' then
 265                                 value = m:formvalue(self:cbid(section) .. ".newnet")
 266                                 if value and #value > 0 then
 267                                         local n = nw:add_network(value, {type="bridge", proto="none"})
 268                                         if n then n:add_interface(i) end
 269                                 else
 270                                         local n = i:get_network()
 271                                         if n then n:del_interface(i) end
 272                                 end
 273                         else
 274                                 local n = nw:get_network(value)
 275                                 if n then
 276                                         n:type("bridge")
 277                                         n:add_interface(i)
 278                                 end
 279                         end
 280                 end
 281         end
 282
 283         -------------------- MAC80211 Interface ----------------------
 284
 285         if hwtype == "mac80211" then
 286                 if fs.access("/usr/sbin/iw") then
 287                         mode:value("mesh", "802.11s")
 288                 end
 289
 290                 mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 291                 mode:value("monitor", translate("Monitor"))
 292                 bssid:depends({mode="adhoc"})
 293
 294                 s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 295                 s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 296         end
 297
 298
 299
 300         -------------------- Madwifi Interface ----------------------
 301
 302         if hwtype == "atheros" then
 303                 mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 304                 mode:value("monitor", translate("Monitor"))
 305                 mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
 306                 mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
 307                 mode:value("wds", translate("Static WDS"))
 308
 309                 function mode.write(self, section, value)
 310                         if value == "ap-wds" then
 311                                 ListValue.write(self, section, "ap")
 312                                 m.uci:set("wireless", section, "wds", 1)
 313                         elseif value == "sta-wds" then
 314                                 ListValue.write(self, section, "sta")
 315                                 m.uci:set("wireless", section, "wds", 1)
 316                         else
 317                                 ListValue.write(self, section, value)
 318                                 m.uci:delete("wireless", section, "wds")
 319                         end
 320                 end
 321
 322                 function mode.cfgvalue(self, section)
 323                         local mode = ListValue.cfgvalue(self, section)
 324                         local wds  = m.uci:get("wireless", section, "wds") == "1"
 325
 326                         if mode == "ap" and wds then
 327                                 return "ap-wds"
 328                         elseif mode == "sta" and wds then
 329                                 return "sta-wds"
 330                         else
 331                                 return mode
 332                         end
 333                 end
 334
 335                 bssid:depends({mode="adhoc"})
 336                 bssid:depends({mode="ahdemo"})
 337                 bssid:depends({mode="wds"})
 338
 339                 wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
 340                 wdssep:depends({mode="ap-wds"})
 341
 342                 s:taboption("advanced", Flag, "doth", "802.11h")
 343                 hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 344                 hidden:depends({mode="ap"})
 345                 hidden:depends({mode="adhoc"})
 346                 hidden:depends({mode="ap-wds"})
 347                 hidden:depends({mode="sta-wds"})
 348                 isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 349                  translate("Prevents client-to-client communication"))
 350                 isolate:depends({mode="ap"})
 351                 s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
 352
 353                 mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 354                 mp:value("", translate("disable"))
 355                 mp:value("deny", translate("Allow listed only"))
 356                 mp:value("allow", translate("Allow all except listed"))
 357                 ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 358                 ml:depends({macpolicy="allow"})
 359                 ml:depends({macpolicy="deny"})
 360
 361                 s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 362                 s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
 363                 s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 364                 s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 365                 s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
 366                 s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
 367                 s:taboption("advanced", Flag, "compression", translate("Compression"))
 368
 369                 s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
 370                 s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
 371                 s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
 372
 373                 s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 374                 s:taboption("advanced", Flag, "xr", translate("XR Support"))
 375                 s:taboption("advanced", Flag, "ar", translate("AR Support"))
 376
 377                 local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
 378                 swm:depends({mode="adhoc"})
 379
 380                 local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 381                 nos:depends({mode="sta"})
 382                 nos:depends({mode="sta-wds"})
 383
 384                 local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
 385                 probereq.enabled  = "0"
 386                 probereq.disabled = "1"
 387         end
 388
 389
 390         -------------------- Broadcom Interface ----------------------
 391
 392         if hwtype == "broadcom" then
 393                 mode:value("wds", translate("WDS"))
 394                 mode:value("monitor", translate("Monitor"))
 395
 396                 hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 397                 hidden:depends({mode="ap"})
 398                 hidden:depends({mode="adhoc"})
 399                 hidden:depends({mode="wds"})
 400
 401                 isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 402                  translate("Prevents client-to-client communication"))
 403                 isolate:depends({mode="ap"})
 404
 405                 s:taboption("advanced", Flag, "doth", "802.11h")
 406                 s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 407
 408                 bssid:depends({mode="wds"})
 409                 bssid:depends({mode="adhoc"})
 410         end
 411
 412
 413         ----------------------- HostAP Interface ---------------------
 414
 415         if hwtype == "prism2" then
 416                 mode:value("wds", translate("WDS"))
 417                 mode:value("monitor", translate("Monitor"))
 418
 419                 hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 420                 hidden:depends({mode="ap"})
 421                 hidden:depends({mode="adhoc"})
 422                 hidden:depends({mode="wds"})
 423
 424                 bssid:depends({mode="sta"})
 425
 426                 mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 427                 mp:value("", translate("disable"))
 428                 mp:value("deny", translate("Allow listed only"))
 429                 mp:value("allow", translate("Allow all except listed"))
 430                 ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 431                 ml:depends({macpolicy="allow"})
 432                 ml:depends({macpolicy="deny"})
 433
 434                 s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 435                 s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 436                 s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 437         end
 438
 439
 440         ------------------- WiFI-Encryption -------------------
 441
 442         encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
 443         encr.override_values = true
 444         encr.override_depends = true
 445         encr:depends({mode="ap"})
 446         encr:depends({mode="sta"})
 447         encr:depends({mode="adhoc"})
 448         encr:depends({mode="ahdemo"})
 449         encr:depends({mode="ap-wds"})
 450         encr:depends({mode="sta-wds"})
 451         encr:depends({mode="mesh"})
 452
 453         encr:value("none", "No Encryption")
 454         encr:value("wep", "WEP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 455
 456         if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 457                 local supplicant = fs.access("/usr/sbin/wpa_supplicant")
 458                 local hostapd = fs.access("/usr/sbin/hostapd")
 459
 460                 if hostapd and supplicant then
 461                         encr:value("psk", "WPA-PSK")
 462                         encr:value("psk2", "WPA2-PSK")
 463                         encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
 464                         encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 465                         encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"})
 466                 elseif hostapd and not supplicant then
 467                         encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 468                         encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 469                         encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 470                         encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
 471                         encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
 472                         encr.description = translate(
 473                                 "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 474                                 "and ad-hoc mode) to be installed."
 475                         )
 476                 elseif not hostapd and supplicant then
 477                         encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
 478                         encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
 479                         encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
 480                         encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
 481                         encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
 482                         encr.description = translate(
 483                                 "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 484                                 "and ad-hoc mode) to be installed."
 485                         )
 486                 else
 487                         encr.description = translate(
 488                                 "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 489                                 "and ad-hoc mode) to be installed."
 490                         )
 491                 end
 492         elseif hwtype == "broadcom" then
 493                 encr:value("psk", "WPA-PSK")
 494                 encr:value("psk2", "WPA2-PSK")
 495                 encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
 496         end
 497
 498         encr:depends("mode", "ap")
 499         encr:depends("mode", "sta")
 500         encr:depends("mode", "ap-wds")
 501         encr:depends("mode", "sta-wds")
 502         encr:depends("mode", "wds")
 503
 504         server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
 505         server:depends({mode="ap", encryption="wpa"})
 506         server:depends({mode="ap", encryption="wpa2"})
 507         server:depends({mode="ap-wds", encryption="wpa"})
 508         server:depends({mode="ap-wds", encryption="wpa2"})
 509         server.rmempty = true
 510
 511         port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
 512         port:depends({mode="ap", encryption="wpa"})
 513         port:depends({mode="ap", encryption="wpa2"})
 514         port:depends({mode="ap-wds", encryption="wpa"})
 515         port:depends({mode="ap-wds", encryption="wpa2"})
 516         port.rmempty = true
 517
 518         key = s:taboption("encryption", Value, "key", translate("Key"))
 519         key:depends("encryption", "wep")
 520         key:depends("encryption", "psk")
 521         key:depends("encryption", "psk2")
 522         key:depends("encryption", "psk+psk2")
 523         key:depends("encryption", "psk-mixed")
 524         key:depends({mode="ap", encryption="wpa"})
 525         key:depends({mode="ap", encryption="wpa2"})
 526         key:depends({mode="ap-wds", encryption="wpa"})
 527         key:depends({mode="ap-wds", encryption="wpa2"})
 528         key.rmempty = true
 529         key.password = true
 530
 531         if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 532                 nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
 533                 nasid:depends({mode="ap", encryption="wpa"})
 534                 nasid:depends({mode="ap", encryption="wpa2"})
 535                 nasid:depends({mode="ap-wds", encryption="wpa"})
 536                 nasid:depends({mode="ap-wds", encryption="wpa2"})
 537                 nasid.rmempty = true
 538
 539                 eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
 540                 eaptype:value("TLS")
 541                 eaptype:value("TTLS")
 542                 eaptype:value("PEAP")
 543                 eaptype:depends({mode="sta", encryption="wpa"})
 544                 eaptype:depends({mode="sta", encryption="wpa2"})
 545
 546                 cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
 547                 cacert:depends({mode="sta", encryption="wpa"})
 548                 cacert:depends({mode="sta", encryption="wpa2"})
 549
 550                 privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
 551                 privkey:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
 552                 privkey:depends({mode="sta", eap_type="TLS", encryption="wpa"})
 553
 554                 privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
 555                 privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
 556                 privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa"})
 557
 558
 559                 auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
 560                 auth:value("PAP")
 561                 auth:value("CHAP")
 562                 auth:value("MSCHAP")
 563                 auth:value("MSCHAPV2")
 564                 auth:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
 565                 auth:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
 566                 auth:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
 567                 auth:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
 568
 569
 570                 identity = s:taboption("encryption", Value, "identity", translate("Identity"))
 571                 identity:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
 572                 identity:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
 573                 identity:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
 574                 identity:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
 575
 576                 password = s:taboption("encryption", Value, "password", translate("Password"))
 577                 password:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
 578                 password:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
 579                 password:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
 580                 password:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
 581         end
 582 end
 583
 584 return m