modules/admin-full/luasrc/controller/admin/system.lua

   1 --[[
   2 LuCI - Lua Configuration Interface
   3
   4 Copyright 2008 Steven Barth <steven@midlink.org>
   5 Copyright 2008-2011 Jo-Philipp Wich <xm@subsignal.org>
   6
   7 Licensed under the Apache License, Version 2.0 (the "License");
   8 you may not use this file except in compliance with the License.
   9 You may obtain a copy of the License at
  10
  11         http://www.apache.org/licenses/LICENSE-2.0
  12
  13 $Id$
  14 ]]--
  15
  16 module("luci.controller.admin.system", package.seeall)
  17
  18 function index()
  19         entry({"admin", "system"}, alias("admin", "system", "system"), _("System"), 30).index = true
  20         entry({"admin", "system", "system"}, cbi("admin_system/system"), _("System"), 1)
  21         entry({"admin", "system", "clock_status"}, call("action_clock_status"))
  22
  23         entry({"admin", "system", "admin"}, cbi("admin_system/admin"), _("Administration"), 2)
  24
  25         if nixio.fs.access("/bin/opkg") then
  26                 entry({"admin", "system", "packages"}, call("action_packages"), _("Software"), 10)
  27                 entry({"admin", "system", "packages", "ipkg"}, form("admin_system/ipkg"))
  28         end
  29
  30         entry({"admin", "system", "startup"}, form("admin_system/startup"), _("Startup"), 45)
  31         entry({"admin", "system", "crontab"}, form("admin_system/crontab"), _("Scheduled Tasks"), 46)
  32
  33         if nixio.fs.access("/etc/config/fstab") then
  34                 entry({"admin", "system", "fstab"}, cbi("admin_system/fstab"), _("Mount Points"), 50)
  35                 entry({"admin", "system", "fstab", "mount"}, cbi("admin_system/fstab/mount"), nil).leaf = true
  36                 entry({"admin", "system", "fstab", "swap"},  cbi("admin_system/fstab/swap"),  nil).leaf = true
  37         end
  38
  39         if nixio.fs.access("/sys/class/leds") then
  40                 entry({"admin", "system", "leds"}, cbi("admin_system/leds"), _("<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"), 60)
  41         end
  42
  43         entry({"admin", "system", "flashops"}, call("action_flashops"), _("Backup / Flash Firmware"), 70)
  44         entry({"admin", "system", "flashops", "backupfiles"}, form("admin_system/backupfiles"))
  45
  46         entry({"admin", "system", "reboot"}, call("action_reboot"), _("Reboot"), 90)
  47 end
  48
  49 function action_clock_status()
  50         local set = tonumber(luci.http.formvalue("set"))
  51         if set ~= nil and set > 0 then
  52                 local date = os.date("*t", set)
  53                 if date then
  54                         luci.sys.call("date -s '%04d-%02d-%02d %02d:%02d:%02d'" %{
  55                                 date.year, date.month, date.day, date.hour, date.min, date.sec
  56                         })
  57                 end
  58         end
  59
  60         luci.http.prepare_content("application/json")
  61         luci.http.write_json({ timestring = os.date("%c") })
  62 end
  63
  64 function action_packages()
  65         local ipkg = require("luci.model.ipkg")
  66         local submit = luci.http.formvalue("submit")
  67         local changes = false
  68         local install = { }
  69         local remove  = { }
  70         local stdout  = { "" }
  71         local stderr  = { "" }
  72         local out, err
  73
  74         -- Display
  75         local display = luci.http.formvalue("display") or "installed"
  76
  77         -- Letter
  78         local letter = string.byte(luci.http.formvalue("letter") or "A", 1)
  79         letter = (letter == 35 or (letter >= 65 and letter <= 90)) and letter or 65
  80
  81         -- Search query
  82         local query = luci.http.formvalue("query")
  83         query = (query ~= '') and query or nil
  84
  85
  86         -- Packets to be installed
  87         local ninst = submit and luci.http.formvalue("install")
  88         local uinst = nil
  89
  90         -- Install from URL
  91         local url = luci.http.formvalue("url")
  92         if url and url ~= '' and submit then
  93                 uinst = url
  94         end
  95
  96         -- Do install
  97         if ninst then
  98                 install[ninst], out, err = ipkg.install(ninst)
  99                 stdout[#stdout+1] = out
 100                 stderr[#stderr+1] = err
 101                 changes = true
 102         end
 103
 104         if uinst then
 105                 local pkg
 106                 for pkg in luci.util.imatch(uinst) do
 107                         install[uinst], out, err = ipkg.install(pkg)
 108                         stdout[#stdout+1] = out
 109                         stderr[#stderr+1] = err
 110                         changes = true
 111                 end
 112         end
 113
 114         -- Remove packets
 115         local rem = submit and luci.http.formvalue("remove")
 116         if rem then
 117                 remove[rem], out, err = ipkg.remove(rem)
 118                 stdout[#stdout+1] = out
 119                 stderr[#stderr+1] = err
 120                 changes = true
 121         end
 122
 123
 124         -- Update all packets
 125         local update = luci.http.formvalue("update")
 126         if update then
 127                 update, out, err = ipkg.update()
 128                 stdout[#stdout+1] = out
 129                 stderr[#stderr+1] = err
 130         end
 131
 132
 133         -- Upgrade all packets
 134         local upgrade = luci.http.formvalue("upgrade")
 135         if upgrade then
 136                 upgrade, out, err = ipkg.upgrade()
 137                 stdout[#stdout+1] = out
 138                 stderr[#stderr+1] = err
 139         end
 140
 141
 142         -- List state
 143         local no_lists = true
 144         local old_lists = false
 145         local tmp = nixio.fs.dir("/var/opkg-lists/")
 146         if tmp then
 147                 for tmp in tmp do
 148                         no_lists = false
 149                         tmp = nixio.fs.stat("/var/opkg-lists/"..tmp)
 150                         if tmp and tmp.mtime < (os.time() - (24 * 60 * 60)) then
 151                                 old_lists = true
 152                                 break
 153                         end
 154                 end
 155         end
 156
 157
 158         luci.template.render("admin_system/packages", {
 159                 display   = display,
 160                 letter    = letter,
 161                 query     = query,
 162                 install   = install,
 163                 remove    = remove,
 164                 update    = update,
 165                 upgrade   = upgrade,
 166                 no_lists  = no_lists,
 167                 old_lists = old_lists,
 168                 stdout    = table.concat(stdout, ""),
 169                 stderr    = table.concat(stderr, "")
 170         })
 171
 172         -- Remove index cache
 173         if changes then
 174                 nixio.fs.unlink("/tmp/luci-indexcache")
 175         end
 176 end
 177
 178 function action_flashops()
 179         local sys = require "luci.sys"
 180         local fs  = require "luci.fs"
 181
 182         local upgrade_avail = nixio.fs.access("/lib/upgrade/platform.sh")
 183         local reset_avail   = os.execute([[grep '"rootfs_data"' /proc/mtd >/dev/null 2>&1]]) == 0
 184
 185         local restore_cmd = "tar -xzC/ >/dev/null 2>&1"
 186         local backup_cmd  = "sysupgrade --create-backup - 2>/dev/null"
 187         local image_tmp   = "/tmp/firmware.img"
 188
 189         local function image_supported()
 190                 -- XXX: yay...
 191                 return ( 0 == os.execute(
 192                         ". /etc/functions.sh; " ..
 193                         "include /lib/upgrade; " ..
 194                         "platform_check_image %q >/dev/null"
 195                                 % image_tmp
 196                 ) )
 197         end
 198
 199         local function image_checksum()
 200                 return (luci.sys.exec("md5sum %q" % image_tmp):match("^([^%s]+)"))
 201         end
 202
 203         local function storage_size()
 204                 local size = 0
 205                 if nixio.fs.access("/proc/mtd") then
 206                         for l in io.lines("/proc/mtd") do
 207                                 local d, s, e, n = l:match('^([^%s]+)%s+([^%s]+)%s+([^%s]+)%s+"([^%s]+)"')
 208                                 if n == "linux" or n == "firmware" then
 209                                         size = tonumber(s, 16)
 210                                         break
 211                                 end
 212                         end
 213                 elseif nixio.fs.access("/proc/partitions") then
 214                         for l in io.lines("/proc/partitions") do
 215                                 local x, y, b, n = l:match('^%s*(%d+)%s+(%d+)%s+([^%s]+)%s+([^%s]+)')
 216                                 if b and n and not n:match('[0-9]') then
 217                                         size = tonumber(b) * 1024
 218                                         break
 219                                 end
 220                         end
 221                 end
 222                 return size
 223         end
 224
 225
 226         local fp
 227         luci.http.setfilehandler(
 228                 function(meta, chunk, eof)
 229                         if not fp then
 230                                 if meta and meta.name == "image" then
 231                                         fp = io.open(image_tmp, "w")
 232                                 else
 233                                         fp = io.popen(restore_cmd, "w")
 234                                 end
 235                         end
 236                         if chunk then
 237                                 fp:write(chunk)
 238                         end
 239                         if eof then
 240                                 fp:close()
 241                         end
 242                 end
 243         )
 244
 245         if luci.http.formvalue("backup") then
 246                 --
 247                 -- Assemble file list, generate backup
 248                 --
 249                 local reader = ltn12_popen(backup_cmd)
 250                 luci.http.header('Content-Disposition', 'attachment; filename="backup-%s-%s.tar.gz"' % {
 251                         luci.sys.hostname(), os.date("%Y-%m-%d")})
 252                 luci.http.prepare_content("application/x-targz")
 253                 luci.ltn12.pump.all(reader, luci.http.write)
 254         elseif luci.http.formvalue("restore") then
 255                 --
 256                 -- Unpack received .tar.gz
 257                 --
 258                 local upload = luci.http.formvalue("archive")
 259                 if upload and #upload > 0 then
 260                         luci.template.render("admin_system/applyreboot")
 261                         luci.sys.reboot()
 262                 end
 263         elseif luci.http.formvalue("image") or luci.http.formvalue("step") then
 264                 --
 265                 -- Initiate firmware flash
 266                 --
 267                 local step = tonumber(luci.http.formvalue("step") or 1)
 268                 if step == 1 then
 269                         if image_supported() then
 270                                 luci.template.render("admin_system/upgrade", {
 271                                         checksum = image_checksum(),
 272                                         storage  = storage_size(),
 273                                         size     = nixio.fs.stat(image_tmp).size,
 274                                         keep     = (not not luci.http.formvalue("keep"))
 275                                 })
 276                         else
 277                                 nixio.fs.unlink(image_tmp)
 278                                 luci.template.render("admin_system/flashops", {
 279                                         reset_avail   = reset_avail,
 280                                         upgrade_avail = upgrade_avail,
 281                                         image_invalid = true
 282                                 })
 283                         end
 284                 --
 285                 -- Start sysupgrade flash
 286                 --
 287                 elseif step == 2 then
 288                         local keep = (luci.http.formvalue("keep") == "1") and "" or "-n"
 289                         luci.template.render("admin_system/applyreboot", {
 290                                 title = luci.i18n.translate("Flashing..."),
 291                                 msg   = luci.i18n.translate("The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes until you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
 292                                 addr  = (#keep > 0) and "192.168.1.1" or nil
 293                         })
 294                         fork_exec("killall dropbear uhttpd; sleep 1; /sbin/sysupgrade %s %q" %{ keep, image_tmp })
 295                 end
 296         elseif reset_avail and luci.http.formvalue("reset") then
 297                 --
 298                 -- Reset system
 299                 --
 300                 luci.template.render("admin_system/applyreboot", {
 301                         title = luci.i18n.translate("Erasing..."),
 302                         msg   = luci.i18n.translate("The system is erasing the configuration partition now and will reboot itself when finished."),
 303                         addr  = "192.168.1.1"
 304                 })
 305                 fork_exec("killall dropbear uhttpd; sleep 1; mtd -r erase rootfs_data")
 306         else
 307                 --
 308                 -- Overview
 309                 --
 310                 luci.template.render("admin_system/flashops", {
 311                         reset_avail   = reset_avail,
 312                         upgrade_avail = upgrade_avail
 313                 })
 314         end
 315 end
 316
 317 function action_passwd()
 318         local p1 = luci.http.formvalue("pwd1")
 319         local p2 = luci.http.formvalue("pwd2")
 320         local stat = nil
 321
 322         if p1 or p2 then
 323                 if p1 == p2 then
 324                         stat = luci.sys.user.setpasswd("root", p1)
 325                 else
 326                         stat = 10
 327                 end
 328         end
 329
 330         luci.template.render("admin_system/passwd", {stat=stat})
 331 end
 332
 333 function action_reboot()
 334         local reboot = luci.http.formvalue("reboot")
 335         luci.template.render("admin_system/reboot", {reboot=reboot})
 336         if reboot then
 337                 luci.sys.reboot()
 338         end
 339 end
 340
 341 function fork_exec(command)
 342         local pid = nixio.fork()
 343         if pid > 0 then
 344                 return
 345         elseif pid == 0 then
 346                 -- change to root dir
 347                 nixio.chdir("/")
 348
 349                 -- patch stdin, out, err to /dev/null
 350                 local null = nixio.open("/dev/null", "w+")
 351                 if null then
 352                         nixio.dup(null, nixio.stderr)
 353                         nixio.dup(null, nixio.stdout)
 354                         nixio.dup(null, nixio.stdin)
 355                         if null:fileno() > 2 then
 356                                 null:close()
 357                         end
 358                 end
 359
 360                 -- replace with target command
 361                 nixio.exec("/bin/sh", "-c", command)
 362         end
 363 end
 364
 365 function ltn12_popen(command)
 366
 367         local fdi, fdo = nixio.pipe()
 368         local pid = nixio.fork()
 369
 370         if pid > 0 then
 371                 fdo:close()
 372                 local close
 373                 return function()
 374                         local buffer = fdi:read(2048)
 375                         local wpid, stat = nixio.waitpid(pid, "nohang")
 376                         if not close and wpid and stat == "exited" then
 377                                 close = true
 378                         end
 379
 380                         if buffer and #buffer > 0 then
 381                                 return buffer
 382                         elseif close then
 383                                 fdi:close()
 384                                 return nil
 385                         end
 386                 end
 387         elseif pid == 0 then
 388                 nixio.dup(fdo, nixio.stdout)
 389                 fdi:close()
 390                 fdo:close()
 391                 nixio.exec("/bin/sh", "-c", command)
 392         end
 393 end