From: Jo-Philipp Wich Date: Mon, 25 Jan 2016 13:41:31 +0000 (+0100) Subject: Sync with upstream nl80211.h X-Git-Url: http://git.archive.openwrt.org/?p=project%2Fiwinfo.git;a=commitdiff_plain;h=1b471aa33dcc1031a456c3a04f04a0097e5b89a5 Sync with upstream nl80211.h Signed-off-by: Jo-Philipp Wich --- diff --git a/api/nl80211.h b/api/nl80211.h index e9b0907..5b7b5eb 100644 --- a/api/nl80211.h +++ b/api/nl80211.h @@ -10,6 +10,7 @@ * Copyright 2008, 2009 Luis R. Rodriguez * Copyright 2008 Jouni Malinen * Copyright 2008 Colin McCabe + * Copyright 2015 Intel Deutschland GmbH * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -25,10 +26,30 @@ * */ +/* + * This header file defines the userspace API to the wireless stack. Please + * be careful not to break things - i.e. don't move anything around or so + * unless you can demonstrate that it breaks neither API nor ABI. + * + * Additions to the API should be accompanied by actual implementations in + * an upstream driver, so that example implementations exist in case there + * are ever concerns about the precise semantics of the API or changes are + * needed, and to ensure that code for dead (no longer implemented) API + * can actually be identified and removed. + * Nonetheless, semantics should also be documented carefully in this file. + */ + #include #define NL80211_GENL_NAME "nl80211" +#define NL80211_MULTICAST_GROUP_CONFIG "config" +#define NL80211_MULTICAST_GROUP_SCAN "scan" +#define NL80211_MULTICAST_GROUP_REG "regulatory" +#define NL80211_MULTICAST_GROUP_MLME "mlme" +#define NL80211_MULTICAST_GROUP_VENDOR "vendor" +#define NL80211_MULTICAST_GROUP_TESTMODE "testmode" + /** * DOC: Station handling * @@ -173,8 +194,8 @@ * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. * * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; - * either a dump request on a %NL80211_ATTR_WIPHY or a specific get - * on an %NL80211_ATTR_IFINDEX is supported. + * either a dump request for all interfaces or a specific get with a + * single %NL80211_ATTR_IFINDEX is supported. * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response @@ -227,7 +248,11 @@ * the interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC * or, if no MAC address given, all stations, on the interface identified - * by %NL80211_ATTR_IFINDEX. + * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and + * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type + * of disconnection indication should be sent to the station + * (Deauthentication or Disassociation frame and reason code for that + * frame). * * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to * destination %NL80211_ATTR_MAC on the interface identified by @@ -248,7 +273,18 @@ * %NL80211_ATTR_IFINDEX. * * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set - * regulatory domain. + * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device + * has a private regulatory domain, it will be returned. Otherwise, the + * global regdomain will be returned. + * A device will have a private regulatory domain if it uses the + * regulatory_hint() API. Even when a private regdomain is used the channel + * information will still be mended according to further hints from + * the regulatory core to help with compliance. A dump version of this API + * is now available which will returns the global regdomain as well as + * all private regdomains of present wiphys (for those that have it). + * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then + * its private regdomain is the only valid one for it. The regulatory + * core is not used to help with compliance in this case. * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command * after being queried by the kernel. CRDA replies by sending a regulatory * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our @@ -293,7 +329,15 @@ * partial scan results may be available * * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain - * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL. + * intervals and certain number of cycles, as specified by + * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is + * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, + * scheduled scan will run in an infinite loop with the specified interval. + * These attributes are mutually exculsive, + * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if + * NL80211_ATTR_SCHED_SCAN_PLANS is defined. + * If for some reason scheduled scan is aborted by the driver, all scan + * plans are canceled (including scan plans that did not start yet). * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) * are passed, they are used in the probe requests. For * broadcast, a broadcast SSID must be passed (ie. an empty @@ -302,7 +346,9 @@ * if passed, define which channels should be scanned; if not * passed, all channels allowed for the current regulatory domain * are used. Extra IEs can also be passed from the userspace by - * using the %NL80211_ATTR_IE attribute. + * using the %NL80211_ATTR_IE attribute. The first cycle of the + * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY + * is supplied. * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if * scheduled scan is not running. The caller may assume that as soon * as the call returns, it is safe to start a new scheduled scan again. @@ -639,7 +685,18 @@ * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels * independently of the userspace SME, send this event indicating * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the - * attributes determining channel width. + * attributes determining channel width. This indication may also be + * sent when a remotely-initiated switch (e.g., when a STA receives a CSA + * from the remote AP) is completed; + * + * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch + * has been started on an interface, regardless of the initiator + * (ie. whether it was requested from a remote device or + * initiated on our own). It indicates that + * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ + * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may + * decide to react to this indication by requesting other + * interfaces to change channel as well. * * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by * its %NL80211_ATTR_WDEV identifier. It must have been created with @@ -722,6 +779,51 @@ * QoS mapping is relevant for IP packets, it is only valid during an * association. This is cleared on disassociation and AP restart. * + * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given + * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO + * and %NL80211_ATTR_ADMITTED_TIME parameters. + * Note that the action frame handshake with the AP shall be handled by + * userspace via the normal management RX/TX framework, this only sets + * up the TX TS in the driver/device. + * If the admitted time attribute is not added then the request just checks + * if a subsequent setup could be successful, the intent is to use this to + * avoid setting up a session with the AP when local restrictions would + * make that impossible. However, the subsequent "real" setup may still + * fail even if the check was successful. + * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID + * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this + * before removing a station entry entirely, or before disassociating + * or similar, cleanup will happen in the driver/device in this case. + * + * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and + * bandwidth of a channel must be given. + * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the + * network is determined by the network interface. + * + * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer, + * identified by the %NL80211_ATTR_MAC parameter. A target channel is + * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining + * channel width/type. The target operating class is given via + * %NL80211_ATTR_OPER_CLASS. + * The driver is responsible for continually initiating channel-switching + * operations and returning to the base channel for communication with the + * AP. + * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS + * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel + * when this command completes. + * + * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used + * as an event to indicate changes for devices with wiphy-specific regdom + * management. + * + * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is + * not running. The driver indicates the status of the scan through + * cfg80211_scan_done(). + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -893,6 +995,23 @@ enum nl80211_commands { NL80211_CMD_SET_QOS_MAP, + NL80211_CMD_ADD_TX_TS, + NL80211_CMD_DEL_TX_TS, + + NL80211_CMD_GET_MPP, + + NL80211_CMD_JOIN_OCB, + NL80211_CMD_LEAVE_OCB, + + NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, + + NL80211_CMD_TDLS_CHANNEL_SWITCH, + NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, + + NL80211_CMD_WIPHY_REG_CHANGE, + + NL80211_CMD_ABORT_SCAN, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1587,13 +1706,91 @@ enum nl80211_commands { * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. * As specified in the &enum nl80211_tdls_peer_capability. * - * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface + * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface * creation then the new interface will be owned by the netlink socket - * that created it and will be destroyed when the socket is closed - * - * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce - * transmit power to stay within regulatory limits. u32, dBi. - * + * that created it and will be destroyed when the socket is closed. + * If set during scheduled scan start then the new scan req will be + * owned by the netlink socket that created it and the scheduled scan will + * be stopped when the socket is closed. + * If set during configuration of regulatory indoor operation then the + * regulatory indoor configuration would be owned by the netlink socket + * that configured the indoor setting, and the indoor operation would be + * cleared when the socket is closed. + * + * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is + * the TDLS link initiator. + * + * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection + * shall support Radio Resource Measurements (11k). This attribute can be + * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests. + * User space applications are expected to use this flag only if the + * underlying device supports these minimal RRM features: + * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, + * %NL80211_FEATURE_QUIET, + * If this flag is used, driver must add the Power Capabilities IE to the + * association request. In addition, it must also set the RRM capability + * flag in the association request's Capability Info field. + * + * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout + * estimation algorithm (dynack). In order to activate dynack + * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower + * drivers to indicate dynack capability. Dynack is automatically disabled + * setting valid value for coverage class. + * + * @NL80211_ATTR_TSID: a TSID value (u8 attribute) + * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) + * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds + * (per second) (u16 attribute) + * + * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see + * &enum nl80211_smps_mode. + * + * @NL80211_ATTR_OPER_CLASS: operating class + * + * @NL80211_ATTR_MAC_MASK: MAC address mask + * + * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device + * is self-managing its regulatory information and any regulatory domain + * obtained from it is coming from the device's wiphy and not the global + * cfg80211 regdomain. + * + * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte + * array. The feature flags are identified by their bit index (see &enum + * nl80211_ext_feature_index). The bit index is ordered starting at the + * least-significant bit of the first byte in the array, ie. bit index 0 + * is located at bit 0 of byte 0. bit index 25 would be located at bit 1 + * of byte 3 (u8 array). + * + * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be + * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY + * may return a survey entry without a channel indicating global radio + * statistics (only some values are valid and make sense.) + * For devices that don't return such an entry even then, the information + * should be contained in the result as the sum of the respective counters + * over all channels. + * + * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a + * scheduled scan is started. Or the delay before a WoWLAN + * net-detect scan is started, counting from the moment the + * system is suspended. This value is a u32, in seconds. + + * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device + * is operating in an indoor environment. + * + * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for + * scheduled scan supported by the device (u32), a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for + * a scan plan (u32), a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in + * a scan plan (u32), a wiphy attribute. + * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan. + * Each scan plan defines the number of scan iterations and the interval + * between scans. The last scan plan will always run infinitely, + * thus it must not specify the number of iterations, only the interval + * between scans. The scan plans are executed sequentially. + * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. + * + * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1929,22 +2126,55 @@ enum nl80211_attrs { NL80211_ATTR_TDLS_PEER_CAPABILITY, - NL80211_ATTR_IFACE_SOCKET_OWNER, + NL80211_ATTR_SOCKET_OWNER, NL80211_ATTR_CSA_C_OFFSETS_TX, NL80211_ATTR_MAX_CSA_COUNTERS, - NL80211_ATTR_WIPHY_ANTENNA_GAIN, + NL80211_ATTR_TDLS_INITIATOR, + + NL80211_ATTR_USE_RRM, + + NL80211_ATTR_WIPHY_DYN_ACK, + + NL80211_ATTR_TSID, + NL80211_ATTR_USER_PRIO, + NL80211_ATTR_ADMITTED_TIME, + + NL80211_ATTR_SMPS_MODE, + + NL80211_ATTR_OPER_CLASS, + + NL80211_ATTR_MAC_MASK, + + NL80211_ATTR_WIPHY_SELF_MANAGED_REG, + + NL80211_ATTR_EXT_FEATURES, + + NL80211_ATTR_SURVEY_RADIO_STATS, + + NL80211_ATTR_NETNS_FD, + + NL80211_ATTR_SCHED_SCAN_DELAY, + + NL80211_ATTR_REG_INDOOR, + + NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS, + NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL, + NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, + NL80211_ATTR_SCHED_SCAN_PLANS, /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, + NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST, NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 }; /* source-level API compatibility */ #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG +#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER /* * Allow user space programs to use #ifdef on new attributes by defining them @@ -1974,7 +2204,7 @@ enum nl80211_attrs { #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_HT_RATES 77 -#define NL80211_MAX_SUPP_REG_RULES 32 +#define NL80211_MAX_SUPP_REG_RULES 64 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 @@ -2010,6 +2240,8 @@ enum nl80211_attrs { * and therefore can't be created in the normal ways, use the * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE * commands to create and destroy one + * @NL80211_IF_TYPE_OCB: Outside Context of a BSS + * This mode corresponds to the MIB variable dot11OCBActivated=true * @NL80211_IFTYPE_MAX: highest interface type number currently defined * @NUM_NL80211_IFTYPES: number of defined interface types * @@ -2029,6 +2261,7 @@ enum nl80211_iftype { NL80211_IFTYPE_P2P_CLIENT, NL80211_IFTYPE_P2P_GO, NL80211_IFTYPE_P2P_DEVICE, + NL80211_IFTYPE_OCB, /* keep last */ NUM_NL80211_IFTYPES, @@ -2111,8 +2344,15 @@ struct nl80211_sta_flag_update { * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate - * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate + * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the + * same as 160 for purposes of the bitrates * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate + * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is + * a legacy rate and will be reported as the actual bitrate, i.e. + * half the base (20 MHz) rate + * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is + * a legacy rate and will be reported as the actual bitrate, i.e. + * a quarter of the base (20 MHz) rate * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -2127,6 +2367,8 @@ enum nl80211_rate_info { NL80211_RATE_INFO_80_MHZ_WIDTH, NL80211_RATE_INFO_80P80_MHZ_WIDTH, NL80211_RATE_INFO_160_MHZ_WIDTH, + NL80211_RATE_INFO_10_MHZ_WIDTH, + NL80211_RATE_INFO_5_MHZ_WIDTH, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -2171,18 +2413,24 @@ enum nl80211_sta_bss_param { * * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) - * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) - * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) - * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station) - * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station) + * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length) + * (u32, from this station) + * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length) + * (u32, to this station) + * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length) + * (u64, from this station) + * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length) + * (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_rate_info - * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) - * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this - * station) - * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) - * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) + * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) + * (u32, from this station) + * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) + * (u32, to this station) + * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station) + * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs) + * (u32, to this station) * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) * @NL80211_STA_INFO_LLID: the station's mesh LLID * @NL80211_STA_INFO_PLID: the station's mesh PLID @@ -2206,6 +2454,16 @@ enum nl80211_sta_bss_param { * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the * 802.11 header (u32, kbps) + * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons + * (u64) + * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) + * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average + * for beacons only (u8, dBm) + * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats) + * This is a nested attribute where each the inner attribute number is the + * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; + * each one of those is again nested with &enum nl80211_tid_stats + * attributes carrying the actual values. * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -2238,6 +2496,10 @@ enum nl80211_sta_info { NL80211_STA_INFO_CHAIN_SIGNAL, NL80211_STA_INFO_CHAIN_SIGNAL_AVG, NL80211_STA_INFO_EXPECTED_THROUGHPUT, + NL80211_STA_INFO_RX_DROP_MISC, + NL80211_STA_INFO_BEACON_RX, + NL80211_STA_INFO_BEACON_SIGNAL_AVG, + NL80211_STA_INFO_TID_STATS, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2245,6 +2507,31 @@ enum nl80211_sta_info { }; /** + * enum nl80211_tid_stats - per TID statistics attributes + * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved + * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64) + * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or + * attempted to transmit; u64) + * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for + * transmitted MSDUs (not counting the first attempt; u64) + * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted + * MSDUs (u64) + * @NUM_NL80211_TID_STATS: number of attributes here + * @NL80211_TID_STATS_MAX: highest numbered attribute here + */ +enum nl80211_tid_stats { + __NL80211_TID_STATS_INVALID, + NL80211_TID_STATS_RX_MSDU, + NL80211_TID_STATS_TX_MSDU, + NL80211_TID_STATS_TX_MSDU_RETRIES, + NL80211_TID_STATS_TX_MSDU_FAILED, + + /* keep last */ + NUM_NL80211_TID_STATS, + NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 +}; + +/** * enum nl80211_mpath_flags - nl80211 mesh path flags * * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active @@ -2367,16 +2654,17 @@ enum nl80211_band_attr { * an indoor surroundings, i.e., it is connected to AC power (and not * through portable DC inverters) or is under the control of a master * that is acting as an AP and is connected to AC power. - * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this + * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this * channel if it's connected concurrently to a BSS on the same channel on * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz - * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a - * channel that has the GO_CONCURRENT attribute set can be done when there - * is a clear assessment that the device is operating under the guidance of - * an authorized master, i.e., setting up a GO while the device is also - * connected to an AP with DFS and radar detection on the UNII band (it is - * up to user-space, i.e., wpa_supplicant to perform the required - * verifications) + * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS + * off-channel on a channel that has the IR_CONCURRENT attribute set can be + * done when there is a clear assessment that the device is operating under + * the guidance of an authorized master, i.e., setting up a GO or TDLS + * off-channel while the device is also connected to an AP with DFS and + * radar detection on the UNII band (it is up to user-space, i.e., + * wpa_supplicant to perform the required verifications). Using this + * attribute for IR is disallowed for master interfaces (IBSS, AP). * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed @@ -2388,7 +2676,7 @@ enum nl80211_band_attr { * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 * for more information on the FCC description of the relaxations allowed * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and - * NL80211_FREQUENCY_ATTR_GO_CONCURRENT. + * NL80211_FREQUENCY_ATTR_IR_CONCURRENT. */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, @@ -2406,7 +2694,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_160MHZ, NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, NL80211_FREQUENCY_ATTR_INDOOR_ONLY, - NL80211_FREQUENCY_ATTR_GO_CONCURRENT, + NL80211_FREQUENCY_ATTR_IR_CONCURRENT, NL80211_FREQUENCY_ATTR_NO_20MHZ, NL80211_FREQUENCY_ATTR_NO_10MHZ, @@ -2419,6 +2707,8 @@ enum nl80211_frequency_attr { #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR #define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ + NL80211_FREQUENCY_ATTR_IR_CONCURRENT /** * enum nl80211_bitrate_attr - bitrate attributes @@ -2577,6 +2867,11 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated * base on contiguous rules and wider channels will be allowed to cross * multiple contiguous/overlapping frequency ranges. + * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT + * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation + * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation + * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed + * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -2589,11 +2884,19 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_IR = 1<<7, __NL80211_RRF_NO_IBSS = 1<<8, NL80211_RRF_AUTO_BW = 1<<11, + NL80211_RRF_IR_CONCURRENT = 1<<12, + NL80211_RRF_NO_HT40MINUS = 1<<13, + NL80211_RRF_NO_HT40PLUS = 1<<14, + NL80211_RRF_NO_80MHZ = 1<<15, + NL80211_RRF_NO_160MHZ = 1<<16, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR #define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR #define NL80211_RRF_NO_IR NL80211_RRF_NO_IR +#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ + NL80211_RRF_NO_HT40PLUS) +#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT /* For backport compatibility with older userspace */ #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) @@ -2646,16 +2949,18 @@ enum nl80211_user_reg_hint_type { * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used - * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio - * spent on this channel - * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary + * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio + * was turned on (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary * channel was sensed busy (either due to activity or energy detect) - * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension + * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension * channel was sensed busy - * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent - * receiving data - * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent - * transmitting data + * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent + * receiving data (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent + * transmitting data (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan + * (on this channel or globally) * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number * currently defined * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use @@ -2665,17 +2970,25 @@ enum nl80211_survey_info { NL80211_SURVEY_INFO_FREQUENCY, NL80211_SURVEY_INFO_NOISE, NL80211_SURVEY_INFO_IN_USE, - NL80211_SURVEY_INFO_CHANNEL_TIME, - NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, - NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, - NL80211_SURVEY_INFO_CHANNEL_TIME_RX, - NL80211_SURVEY_INFO_CHANNEL_TIME_TX, + NL80211_SURVEY_INFO_TIME, + NL80211_SURVEY_INFO_TIME_BUSY, + NL80211_SURVEY_INFO_TIME_EXT_BUSY, + NL80211_SURVEY_INFO_TIME_RX, + NL80211_SURVEY_INFO_TIME_TX, + NL80211_SURVEY_INFO_TIME_SCAN, /* keep last */ __NL80211_SURVEY_INFO_AFTER_LAST, NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 }; +/* keep old names for compatibility */ +#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME +#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY +#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY +#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX +#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX + /** * enum nl80211_mntr_flags - monitor configuration flags * @@ -2840,7 +3153,8 @@ enum nl80211_mesh_power_mode { * * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've * established peering with for longer than this time (in seconds), then - * remove it from the STA's list of peers. Default is 30 minutes. + * remove it from the STA's list of peers. You may set this to 0 to disable + * the removal of the STA. Default is 30 minutes. * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ @@ -3055,14 +3369,20 @@ enum nl80211_bss_scan_width { * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) + * (if @NL80211_BSS_PRESP_DATA is present then this is known to be + * from a probe response, otherwise it may be from the same beacon + * that the NL80211_BSS_BEACON_TSF will be from) * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the * raw information elements from the probe response/beacon (bin); - * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are - * from a Probe Response frame; otherwise they are from a Beacon frame. + * if the %NL80211_BSS_BEACON_IES attribute is present and the data is + * different then the IEs here are from a Probe Response frame; otherwise + * they are from a Beacon frame. * However, if the driver does not indicate the source of the IEs, these * IEs may be from either frame subtype. + * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the + * data here is known to be from a probe response, without any heuristics. * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon * in mBm (100 * dBm) (s32) * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon @@ -3074,6 +3394,13 @@ enum nl80211_bss_scan_width { * yet been received * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel * (u32, enum nl80211_bss_scan_width) + * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) + * (not present if no beacon frame has been received yet) + * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and + * @NL80211_BSS_TSF is known to be from a probe response (flag attribute) + * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry + * was last updated by a received frame. The value is expected to be + * accurate to about 10ms. (u64, nanoseconds) * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -3091,6 +3418,9 @@ enum nl80211_bss { NL80211_BSS_SEEN_MS_AGO, NL80211_BSS_BEACON_IES, NL80211_BSS_CHAN_WIDTH, + NL80211_BSS_BEACON_TSF, + NL80211_BSS_PRESP_DATA, + NL80211_BSS_LAST_SEEN_BOOTTIME, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -3100,6 +3430,9 @@ enum nl80211_bss { /** * enum nl80211_bss_status - BSS "status" * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. + * Note that this is no longer used since cfg80211 no longer + * keeps track of whether or not authentication was done with + * a given BSS. * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. * @@ -3313,6 +3646,8 @@ enum nl80211_ps_state { * interval in which %NL80211_ATTR_CQM_TXE_PKTS and * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. + * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon + * loss event * @__NL80211_ATTR_CQM_AFTER_LAST: internal * @NL80211_ATTR_CQM_MAX: highest key attribute */ @@ -3325,6 +3660,7 @@ enum nl80211_attr_cqm { NL80211_ATTR_CQM_TXE_RATE, NL80211_ATTR_CQM_TXE_PKTS, NL80211_ATTR_CQM_TXE_INTVL, + NL80211_ATTR_CQM_BEACON_LOSS_EVENT, /* keep last */ __NL80211_ATTR_CQM_AFTER_LAST, @@ -3337,9 +3673,7 @@ enum nl80211_attr_cqm { * configured threshold * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the * configured threshold - * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss. - * (Note that deauth/disassoc will still follow if the AP is not - * available. This event might get used as roaming event, etc.) + * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent) */ enum nl80211_cqm_rssi_threshold_event { NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, @@ -3426,6 +3760,8 @@ struct nl80211_pattern_support { * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put * the chip into a special state -- works best with chips that have * support for low-power operation already (flag) + * Note that this mode is incompatible with all of the others, if + * any others are even supported by the device. * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect * is detected is implementation-specific (flag) * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed @@ -3479,6 +3815,28 @@ struct nl80211_pattern_support { * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, * the TCP connection ran out of tokens to use for data to send to the * service + * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network + * is detected. This is a nested attribute that contains the + * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It + * specifies how the scan is performed (e.g. the interval, the + * channels to scan and the initial delay) as well as the scan + * results that will trigger a wake (i.e. the matchsets). This + * attribute is also sent in a response to + * @NL80211_CMD_GET_WIPHY, indicating the number of match sets + * supported by the driver (u32). + * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute + * containing an array with information about what triggered the + * wake up. If no elements are present in the array, it means + * that the information is not available. If more than one + * element is present, it means that more than one match + * occurred. + * Each element in the array is a nested attribute that contains + * one optional %NL80211_ATTR_SSID attribute and one optional + * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of + * these attributes must be present. If + * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one + * frequency, it means that the match occurred in more than one + * channel. * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number * @@ -3504,6 +3862,8 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, + NL80211_WOWLAN_TRIG_NET_DETECT, + NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, /* keep last */ NUM_NL80211_WOWLAN_TRIG, @@ -3956,6 +4316,47 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the * lifetime of a BSS. + * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter + * Set IE to probe requests. + * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE + * to probe requests. + * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period + * requests sent to it by an AP. + * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the + * current tx power value into the TPC Report IE in the spectrum + * management TPC Report action frame, and in the Radio Measurement Link + * Measurement Report action frame. + * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout + * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used + * to enable dynack. + * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial + * multiplexing powersave, ie. can turn off all but one chain + * even on HT connections that should be using more chains. + * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial + * multiplexing powersave, ie. can turn off all but one chain + * and then wake the rest up as required after, for example, + * rts/cts handshake. + * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM + * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS + * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it + * needs to be able to handle Block-Ack agreements and other things. + * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring + * the vif's MAC address upon creation. + * See 'macaddr' field in the vif_params (cfg80211.h). + * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when + * operating as a TDLS peer. + * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a + * random MAC address during scan (if the device is unassociated); the + * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC + * address mask/value will be used. + * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports + * using a random MAC address for every scan iteration during scheduled + * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may + * be set for scheduled scan and the MAC address mask/value will be used. + * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a + * random MAC address for every scan iteration during "net detect", i.e. + * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may + * be set for scheduled scan and the MAC address mask/value will be used. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3977,6 +4378,34 @@ enum nl80211_feature_flags { NL80211_FEATURE_USERSPACE_MPM = 1 << 16, NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, + NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19, + NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20, + NL80211_FEATURE_QUIET = 1 << 21, + NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22, + NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, + NL80211_FEATURE_STATIC_SMPS = 1 << 24, + NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, + NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26, + NL80211_FEATURE_MAC_ON_CREATE = 1 << 27, + NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, + NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, + NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, + NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31, +}; + +/** + * enum nl80211_ext_feature_index - bit index of extended features. + * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. + * + * @NUM_NL80211_EXT_FEATURES: number of extended features. + * @MAX_NL80211_EXT_FEATURES: highest extended feature index. + */ +enum nl80211_ext_feature_index { + NL80211_EXT_FEATURE_VHT_IBSS, + + /* add new features before the definition below */ + NUM_NL80211_EXT_FEATURES, + MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 }; /** @@ -4025,11 +4454,21 @@ enum nl80211_connect_failed_reason { * dangerous because will destroy stations performance as a lot of frames * will be lost while scanning off-channel, therefore it must be used only * when really needed + * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or + * for scheduled scan: a different one for every scan iteration). When the + * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and + * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only + * the masked bits will be preserved from the MAC address and the remainder + * randomised. If the attributes are not given full randomisation (46 bits, + * locally administered 1, multicast 0) is assumed. + * This flag must not be requested when the feature isn't supported, check + * the nl80211 feature flags for the device. */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, NL80211_SCAN_FLAG_FLUSH = 1<<1, NL80211_SCAN_FLAG_AP = 1<<2, + NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, }; /** @@ -4051,6 +4490,25 @@ enum nl80211_acl_policy { }; /** + * enum nl80211_smps_mode - SMPS mode + * + * Requested SMPS mode (for AP mode) + * + * @NL80211_SMPS_OFF: SMPS off (use all antennas). + * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) + * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and + * turn on other antennas after CTS/RTS). + */ +enum nl80211_smps_mode { + NL80211_SMPS_OFF, + NL80211_SMPS_STATIC, + NL80211_SMPS_DYNAMIC, + + __NL80211_SMPS_AFTER_LAST, + NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1 +}; + +/** * enum nl80211_radar_event - type of radar event for DFS operation * * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace @@ -4169,4 +4627,28 @@ enum nl80211_tdls_peer_capability { NL80211_TDLS_PEER_WMM = 1<<2, }; +/** + * enum nl80211_sched_scan_plan - scanning plan for scheduled scan + * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In + * seconds (u32). + * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this + * scan plan (u32). The last scan plan must not specify this attribute + * because it will run infinitely. A value of zero is invalid as it will + * make the scan plan meaningless. + * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number + * currently defined + * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use + */ +enum nl80211_sched_scan_plan { + __NL80211_SCHED_SCAN_PLAN_INVALID, + NL80211_SCHED_SCAN_PLAN_INTERVAL, + NL80211_SCHED_SCAN_PLAN_ITERATIONS, + + /* keep last */ + __NL80211_SCHED_SCAN_PLAN_AFTER_LAST, + NL80211_SCHED_SCAN_PLAN_MAX = + __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 +}; + #endif /* __LINUX_NL80211_H */