+++ /dev/null
---- /dev/null
-+++ b/mibs/BGP4-MIB.txt
-@@ -0,0 +1,929 @@
-+ BGP4-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
-+ IpAddress, Integer32, Counter32, Gauge32, mib-2
-+ FROM SNMPv2-SMI
-+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
-+ FROM SNMPv2-CONF;
-+
-+ bgp MODULE-IDENTITY
-+ LAST-UPDATED "9902100000Z"
-+ ORGANIZATION "IETF IDR Working Group"
-+ CONTACT-INFO "E-mail: idr@merit.net
-+
-+ Susan Hares (Editor)
-+ Merit Network
-+ 4251 Plymouth Road
-+ Suite C
-+ Ann Arbor, MI 48105-2785
-+ Tel: +1 734 936 2095
-+ Fax: +1 734 647 3185
-+ E-mail: skh@merit.edu
-+
-+ Jeff Johnson (Editor)
-+ RedBack Networks, Inc.
-+ 1389 Moffett Park Drive
-+ Sunnyvale, CA 94089-1134
-+ Tel: +1 408 548 3516
-+ Fax: +1 408 548 3599
-+ E-mail: jeff@redback.com"
-+ DESCRIPTION
-+ "The MIB module for BGP-4."
-+ REVISION "9902100000Z"
-+ DESCRIPTION
-+ "Corrected duplicate OBJECT IDENTIFIER
-+ assignment in the conformance information."
-+ REVISION "9601080000Z"
-+ DESCRIPTION
-+ "1) Fixed the definitions of the traps to
-+ make them equivalent to their initial
-+ definition in RFC 1269.
-+ 2) Added compliance and conformance info."
-+ ::= { mib-2 15 }
-+
-+ bgpVersion OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (1..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Vector of supported BGP protocol version
-+ numbers. Each peer negotiates the version
-+ from this vector. Versions are identified
-+ via the string of bits contained within this
-+ object. The first octet contains bits 0 to
-+ 7, the second octet contains bits 8 to 15,
-+ and so on, with the most significant bit
-+ referring to the lowest bit number in the
-+ octet (e.g., the MSB of the first octet
-+ refers to bit 0). If a bit, i, is present
-+ and set, then the version (i+1) of the BGP
-+ is supported."
-+ ::= { bgp 1 }
-+
-+ bgpLocalAs OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local autonomous system number."
-+ ::= { bgp 2 }
-+
-+
-+
-+ -- BGP Peer table. This table contains, one entry per BGP
-+ -- peer, information about the BGP peer.
-+
-+ bgpPeerTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF BgpPeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "BGP peer table. This table contains,
-+ one entry per BGP peer, information about the
-+ connections with BGP peers."
-+ ::= { bgp 3 }
-+
-+ bgpPeerEntry OBJECT-TYPE
-+ SYNTAX BgpPeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Entry containing information about the
-+ connection with a BGP peer."
-+ INDEX { bgpPeerRemoteAddr }
-+ ::= { bgpPeerTable 1 }
-+
-+ BgpPeerEntry ::= SEQUENCE {
-+ bgpPeerIdentifier
-+ IpAddress,
-+ bgpPeerState
-+ INTEGER,
-+ bgpPeerAdminStatus
-+ INTEGER,
-+ bgpPeerNegotiatedVersion
-+ Integer32,
-+ bgpPeerLocalAddr
-+ IpAddress,
-+ bgpPeerLocalPort
-+ INTEGER,
-+ bgpPeerRemoteAddr
-+ IpAddress,
-+ bgpPeerRemotePort
-+ INTEGER,
-+ bgpPeerRemoteAs
-+ INTEGER,
-+ bgpPeerInUpdates
-+ Counter32,
-+ bgpPeerOutUpdates
-+ Counter32,
-+ bgpPeerInTotalMessages
-+ Counter32,
-+ bgpPeerOutTotalMessages
-+ Counter32,
-+ bgpPeerLastError
-+ OCTET STRING,
-+ bgpPeerFsmEstablishedTransitions
-+ Counter32,
-+ bgpPeerFsmEstablishedTime
-+ Gauge32,
-+ bgpPeerConnectRetryInterval
-+ INTEGER,
-+ bgpPeerHoldTime
-+ INTEGER,
-+ bgpPeerKeepAlive
-+ INTEGER,
-+ bgpPeerHoldTimeConfigured
-+ INTEGER,
-+ bgpPeerKeepAliveConfigured
-+ INTEGER,
-+ bgpPeerMinASOriginationInterval
-+ INTEGER,
-+ bgpPeerMinRouteAdvertisementInterval
-+ INTEGER,
-+ bgpPeerInUpdateElapsedTime
-+ Gauge32
-+ }
-+
-+ bgpPeerIdentifier OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Identifier of this entry's BGP peer."
-+ ::= { bgpPeerEntry 1 }
-+
-+ bgpPeerState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ idle(1),
-+ connect(2),
-+ active(3),
-+ opensent(4),
-+ openconfirm(5),
-+ established(6)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP peer connection state."
-+ ::= { bgpPeerEntry 2 }
-+
-+ bgpPeerAdminStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ stop(1),
-+ start(2)
-+ }
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The desired state of the BGP connection. A
-+ transition from 'stop' to 'start' will cause
-+ the BGP Start Event to be generated. A
-+ transition from 'start' to 'stop' will cause
-+ the BGP Stop Event to be generated. This
-+ parameter can be used to restart BGP peer
-+ connections. Care should be used in providing
-+ write access to this object without adequate
-+ authentication."
-+ ::= { bgpPeerEntry 3 }
-+
-+ bgpPeerNegotiatedVersion OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The negotiated version of BGP running between
-+ the two peers."
-+ ::= { bgpPeerEntry 4 }
-+
-+ bgpPeerLocalAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local IP address of this entry's BGP
-+ connection."
-+ ::= { bgpPeerEntry 5 }
-+
-+ bgpPeerLocalPort OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The local port for the TCP connection between
-+ the BGP peers."
-+ ::= { bgpPeerEntry 6 }
-+
-+ bgpPeerRemoteAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote IP address of this entry's BGP
-+ peer."
-+ ::= { bgpPeerEntry 7 }
-+
-+ bgpPeerRemotePort OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote port for the TCP connection between
-+ the BGP peers. Note that the objects
-+ bgpPeerLocalAddr, bgpPeerLocalPort,
-+ bgpPeerRemoteAddr and bgpPeerRemotePort
-+ provide the appropriate reference to the
-+ standard MIB TCP connection table."
-+ ::= { bgpPeerEntry 8 }
-+
-+ bgpPeerRemoteAs OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The remote autonomous system number."
-+ ::= { bgpPeerEntry 9 }
-+
-+ bgpPeerInUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of BGP UPDATE messages received on
-+ this connection. This object should be
-+ initialized to zero (0) when the connection is
-+ established."
-+ ::= { bgpPeerEntry 10 }
-+
-+ bgpPeerOutUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of BGP UPDATE messages transmitted
-+ on this connection. This object should be
-+ initialized to zero (0) when the connection is
-+ established."
-+ ::= { bgpPeerEntry 11 }
-+
-+ bgpPeerInTotalMessages OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of messages received from the
-+ remote peer on this connection. This object
-+ should be initialized to zero when the
-+ connection is established."
-+ ::= { bgpPeerEntry 12 }
-+
-+ bgpPeerOutTotalMessages OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of messages transmitted to
-+ the remote peer on this connection. This object
-+ should be initialized to zero when the
-+ connection is established."
-+ ::= { bgpPeerEntry 13 }
-+
-+ bgpPeerLastError OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The last error code and subcode seen by this
-+ peer on this connection. If no error has
-+ occurred, this field is zero. Otherwise, the
-+ first byte of this two byte OCTET STRING
-+ contains the error code, and the second byte
-+ contains the subcode."
-+ ::= { bgpPeerEntry 14 }
-+
-+ bgpPeerFsmEstablishedTransitions OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of times the BGP FSM
-+ transitioned into the established state."
-+ ::= { bgpPeerEntry 15 }
-+
-+ bgpPeerFsmEstablishedTime OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This timer indicates how long (in seconds) this
-+ peer has been in the Established state or how long
-+ since this peer was last in the Established state.
-+ It is set to zero when a new peer is configured or
-+ the router is booted."
-+ ::= { bgpPeerEntry 16 }
-+
-+ bgpPeerConnectRetryInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the ConnectRetry
-+ timer. The suggested value for this timer is
-+ 120 seconds."
-+ ::= { bgpPeerEntry 17 }
-+
-+ bgpPeerHoldTime OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 3..65535 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the Hold Timer
-+ established with the peer. The value of this
-+ object is calculated by this BGP speaker by
-+ using the smaller of the value in
-+ bgpPeerHoldTimeConfigured and the Hold Time
-+ received in the OPEN message. This value
-+ must be at lease three seconds if it is not
-+ zero (0) in which case the Hold Timer has
-+ not been established with the peer, or, the
-+ value of bgpPeerHoldTimeConfigured is zero (0)."
-+ ::= { bgpPeerEntry 18 }
-+
-+ bgpPeerKeepAlive OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 1..21845 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the KeepAlive
-+ timer established with the peer. The value of
-+ this object is calculated by this BGP speaker
-+ such that, when compared with bgpPeerHoldTime,
-+ it has the same proportion as what
-+ bgpPeerKeepAliveConfigured has when compared
-+ with bgpPeerHoldTimeConfigured. If the value
-+ of this object is zero (0), it indicates that
-+ the KeepAlive timer has not been established
-+ with the peer, or, the value of
-+ bgpPeerKeepAliveConfigured is zero (0)."
-+ ::= { bgpPeerEntry 19 }
-+
-+ bgpPeerHoldTimeConfigured OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 3..65535 )
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the Hold Time
-+ configured for this BGP speaker with this peer.
-+ This value is placed in an OPEN message sent to
-+ this peer by this BGP speaker, and is compared
-+ with the Hold Time field in an OPEN message
-+ received from the peer when determining the Hold
-+ Time (bgpPeerHoldTime) with the peer. This value
-+ must not be less than three seconds if it is not
-+ zero (0) in which case the Hold Time is NOT to be
-+ established with the peer. The suggested value for
-+ this timer is 90 seconds."
-+ ::= { bgpPeerEntry 20 }
-+
-+ bgpPeerKeepAliveConfigured OBJECT-TYPE
-+ SYNTAX INTEGER ( 0 | 1..21845 )
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the KeepAlive timer
-+ configured for this BGP speaker with this peer.
-+ The value of this object will only determine the
-+ KEEPALIVE messages' frequency relative to the value
-+ specified in bgpPeerHoldTimeConfigured; the actual
-+ time interval for the KEEPALIVE messages is
-+ indicated by bgpPeerKeepAlive. A reasonable
-+ maximum value for this timer would be configured to
-+ be one third of that of bgpPeerHoldTimeConfigured.
-+ If the value of this object is zero (0), no
-+ periodical KEEPALIVE messages are sent to the peer
-+ after the BGP connection has been established. The
-+ suggested value for this timer is 30 seconds."
-+ ::= { bgpPeerEntry 21 }
-+
-+ bgpPeerMinASOriginationInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the
-+ MinASOriginationInterval timer.
-+ The suggested value for this timer is 15 seconds."
-+ ::= { bgpPeerEntry 22 }
-+
-+ bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "Time interval in seconds for the
-+ MinRouteAdvertisementInterval timer.
-+ The suggested value for this timer is 30 seconds."
-+ ::= { bgpPeerEntry 23 }
-+
-+ bgpPeerInUpdateElapsedTime OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Elapsed time in seconds since the last BGP
-+ UPDATE message was received from the peer.
-+ Each time bgpPeerInUpdates is incremented,
-+ the value of this object is set to zero (0)."
-+ ::= { bgpPeerEntry 24 }
-+
-+
-+
-+ bgpIdentifier OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Identifier of local system."
-+ ::= { bgp 4 }
-+
-+
-+
-+ -- Received Path Attribute Table. This table contains,
-+ -- one entry per path to a network, path attributes
-+ -- received from all peers running BGP version 3 or less.
-+ -- This table is obsolete, having been replaced in
-+ -- functionality with the bgp4PathAttrTable.
-+
-+ bgpRcvdPathAttrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF BgpPathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The BGP Received Path Attribute Table contains
-+ information about paths to destination networks
-+ received from all peers running BGP version 3 or
-+ less."
-+ ::= { bgp 5 }
-+
-+ bgpPathAttrEntry OBJECT-TYPE
-+ SYNTAX BgpPathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Information about a path to a network."
-+ INDEX { bgpPathAttrDestNetwork,
-+ bgpPathAttrPeer }
-+ ::= { bgpRcvdPathAttrTable 1 }
-+
-+ BgpPathAttrEntry ::= SEQUENCE {
-+ bgpPathAttrPeer
-+ IpAddress,
-+ bgpPathAttrDestNetwork
-+ IpAddress,
-+ bgpPathAttrOrigin
-+ INTEGER,
-+ bgpPathAttrASPath
-+ OCTET STRING,
-+ bgpPathAttrNextHop
-+ IpAddress,
-+ bgpPathAttrInterASMetric
-+ Integer32
-+ }
-+
-+ bgpPathAttrPeer OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The IP address of the peer where the path
-+ information was learned."
-+ ::= { bgpPathAttrEntry 1 }
-+
-+ bgpPathAttrDestNetwork OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The address of the destination network."
-+ ::= { bgpPathAttrEntry 2 }
-+
-+ bgpPathAttrOrigin OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ igp(1),-- networks are interior
-+ egp(2),-- networks learned via EGP
-+ incomplete(3) -- undetermined
-+ }
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The ultimate origin of the path information."
-+ ::= { bgpPathAttrEntry 3 }
-+
-+ bgpPathAttrASPath OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2..255))
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The set of ASs that must be traversed to reach
-+ the network. This object is probably best
-+ represented as SEQUENCE OF INTEGER. For SMI
-+ compatibility, though, it is represented as
-+ OCTET STRING. Each AS is represented as a pair
-+ of octets according to the following algorithm:
-+
-+ first-byte-of-pair = ASNumber / 256;
-+ second-byte-of-pair = ASNumber & 255;"
-+ ::= { bgpPathAttrEntry 4 }
-+
-+ bgpPathAttrNextHop OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The address of the border router that should
-+ be used for the destination network."
-+ ::= { bgpPathAttrEntry 5 }
-+
-+ bgpPathAttrInterASMetric OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The optional inter-AS metric. If this
-+ attribute has not been provided for this route,
-+ the value for this object is 0."
-+ ::= { bgpPathAttrEntry 6 }
-+
-+
-+
-+ -- BGP-4 Received Path Attribute Table. This table contains,
-+ -- one entry per path to a network, path attributes
-+ -- received from all peers running BGP-4.
-+
-+ bgp4PathAttrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Bgp4PathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP-4 Received Path Attribute Table contains
-+ information about paths to destination networks
-+ received from all BGP4 peers."
-+ ::= { bgp 6 }
-+
-+ bgp4PathAttrEntry OBJECT-TYPE
-+ SYNTAX Bgp4PathAttrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about a path to a network."
-+ INDEX { bgp4PathAttrIpAddrPrefix,
-+ bgp4PathAttrIpAddrPrefixLen,
-+ bgp4PathAttrPeer }
-+ ::= { bgp4PathAttrTable 1 }
-+
-+ Bgp4PathAttrEntry ::= SEQUENCE {
-+ bgp4PathAttrPeer
-+ IpAddress,
-+ bgp4PathAttrIpAddrPrefixLen
-+ INTEGER,
-+ bgp4PathAttrIpAddrPrefix
-+ IpAddress,
-+ bgp4PathAttrOrigin
-+ INTEGER,
-+ bgp4PathAttrASPathSegment
-+ OCTET STRING,
-+ bgp4PathAttrNextHop
-+ IpAddress,
-+ bgp4PathAttrMultiExitDisc
-+ INTEGER,
-+ bgp4PathAttrLocalPref
-+ INTEGER,
-+ bgp4PathAttrAtomicAggregate
-+ INTEGER,
-+ bgp4PathAttrAggregatorAS
-+ INTEGER,
-+ bgp4PathAttrAggregatorAddr
-+ IpAddress,
-+ bgp4PathAttrCalcLocalPref
-+ INTEGER,
-+ bgp4PathAttrBest
-+ INTEGER,
-+ bgp4PathAttrUnknown
-+ OCTET STRING
-+ }
-+
-+ bgp4PathAttrPeer OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of the peer where the path
-+ information was learned."
-+ ::= { bgp4PathAttrEntry 1 }
-+ bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE
-+ SYNTAX INTEGER (0..32)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Length in bits of the IP address prefix in the
-+ Network Layer Reachability Information field."
-+ ::= { bgp4PathAttrEntry 2 }
-+
-+ bgp4PathAttrIpAddrPrefix OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "An IP address prefix in the Network Layer
-+ Reachability Information field. This object
-+ is an IP address containing the prefix with
-+ length specified by bgp4PathAttrIpAddrPrefixLen.
-+ Any bits beyond the length specified by
-+ bgp4PathAttrIpAddrPrefixLen are zeroed."
-+ ::= { bgp4PathAttrEntry 3 }
-+
-+ bgp4PathAttrOrigin OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ igp(1),-- networks are interior
-+ egp(2),-- networks learned via EGP
-+ incomplete(3) -- undetermined
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The ultimate origin of the path information."
-+ ::= { bgp4PathAttrEntry 4 }
-+
-+ bgp4PathAttrASPathSegment OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence of AS path segments. Each AS
-+ path segment is represented by a triple
-+ <type, length, value>.
-+
-+ The type is a 1-octet field which has two
-+ possible values:
-+ 1 AS_SET: unordered set of ASs a
-+ route in the UPDATE message
-+ has traversed
-+ 2 AS_SEQUENCE: ordered set of ASs
-+ a route in the UPDATE message
-+ has traversed.
-+
-+ The length is a 1-octet field containing the
-+ number of ASs in the value field.
-+
-+ The value field contains one or more AS
-+ numbers, each AS is represented in the octet
-+ string as a pair of octets according to the
-+ following algorithm:
-+
-+ first-byte-of-pair = ASNumber / 256;
-+ second-byte-of-pair = ASNumber & 255;"
-+ ::= { bgp4PathAttrEntry 5 }
-+
-+ bgp4PathAttrNextHop OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The address of the border router that should
-+ be used for the destination network."
-+ ::= { bgp4PathAttrEntry 6 }
-+
-+ bgp4PathAttrMultiExitDisc OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This metric is used to discriminate between
-+ multiple exit points to an adjacent autonomous
-+ system. A value of -1 indicates the absence of
-+ this attribute."
-+ ::= { bgp4PathAttrEntry 7 }
-+
-+ bgp4PathAttrLocalPref OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The originating BGP4 speaker's degree of
-+ preference for an advertised route. A value of
-+ -1 indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 8 }
-+
-+ bgp4PathAttrAtomicAggregate OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ lessSpecificRrouteNotSelected(1),
-+ lessSpecificRouteSelected(2)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Whether or not a system has selected
-+ a less specific route without selecting a
-+ more specific route."
-+ ::= { bgp4PathAttrEntry 9 }
-+
-+ bgp4PathAttrAggregatorAS OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The AS number of the last BGP4 speaker that
-+ performed route aggregation. A value of zero (0)
-+ indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 10 }
-+
-+ bgp4PathAttrAggregatorAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of the last BGP4 speaker that
-+ performed route aggregation. A value of
-+ 0.0.0.0 indicates the absence of this attribute."
-+ ::= { bgp4PathAttrEntry 11 }
-+
-+ bgp4PathAttrCalcLocalPref OBJECT-TYPE
-+ SYNTAX INTEGER (-1..2147483647)
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The degree of preference calculated by the
-+ receiving BGP4 speaker for an advertised route.
-+ A value of -1 indicates the absence of this
-+ attribute."
-+ ::= { bgp4PathAttrEntry 12 }
-+
-+ bgp4PathAttrBest OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ false(1),-- not chosen as best route
-+ true(2) -- chosen as best route
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "An indication of whether or not this route
-+ was chosen as the best BGP4 route."
-+ ::= { bgp4PathAttrEntry 13 }
-+
-+ bgp4PathAttrUnknown OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..255))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "One or more path attributes not understood
-+ by this BGP4 speaker. Size zero (0) indicates
-+ the absence of such attribute(s). Octets
-+ beyond the maximum size, if any, are not
-+ recorded by this object."
-+ ::= { bgp4PathAttrEntry 14 }
-+
-+
-+ -- Traps.
-+
-+ -- note that in RFC 1657, bgpTraps was incorrectly
-+ -- assigned a value of { bgp 7 }, and each of the
-+ -- traps had the bgpPeerRemoteAddr object inappropriately
-+ -- removed from their OBJECTS clause. The following
-+ -- definitions restore the semantics of the traps as
-+ -- they were initially defined in RFC 1269.
-+
-+ -- { bgp 7 } is unused
-+
-+ bgpTraps OBJECT IDENTIFIER ::= { bgp 0 }
-+
-+ bgpEstablished NOTIFICATION-TYPE
-+ OBJECTS { bgpPeerRemoteAddr,
-+ bgpPeerLastError,
-+ bgpPeerState }
-+ STATUS current
-+ DESCRIPTION
-+ "The BGP Established event is generated when
-+ the BGP FSM enters the ESTABLISHED state."
-+ ::= { bgpTraps 1 }
-+
-+ bgpBackwardTransition NOTIFICATION-TYPE
-+ OBJECTS { bgpPeerRemoteAddr,
-+ bgpPeerLastError,
-+ bgpPeerState }
-+ STATUS current
-+ DESCRIPTION
-+ "The BGPBackwardTransition Event is generated
-+ when the BGP FSM moves from a higher numbered
-+ state to a lower numbered state."
-+ ::= { bgpTraps 2 }
-+
-+ -- conformance information
-+
-+ bgpMIBConformance OBJECT IDENTIFIER ::= { bgp 8 }
-+ bgpMIBCompliances OBJECT IDENTIFIER ::= { bgpMIBConformance 1 }
-+ bgpMIBGroups OBJECT IDENTIFIER ::= { bgpMIBConformance 2 }
-+
-+ -- compliance statements
-+
-+ bgpMIBCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement for entities which
-+ implement the BGP4 mib."
-+ MODULE -- this module
-+ MANDATORY-GROUPS { bgp4MIBGlobalsGroup,
-+ bgp4MIBPeerGroup,
-+ bgp4MIBPathAttrGroup,
-+ bgp4MIBNotificationGroup }
-+ ::= { bgpMIBCompliances 1 }
-+
-+ -- units of conformance
-+
-+ bgp4MIBGlobalsGroup OBJECT-GROUP
-+ OBJECTS { bgpVersion,
-+ bgpLocalAs,
-+ bgpIdentifier }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects providing information
-+ on global BGP state."
-+ ::= { bgpMIBGroups 1 }
-+
-+ bgp4MIBPeerGroup OBJECT-GROUP
-+ OBJECTS { bgpPeerIdentifier,
-+ bgpPeerState,
-+ bgpPeerAdminStatus,
-+ bgpPeerNegotiatedVersion,
-+ bgpPeerLocalAddr,
-+ bgpPeerLocalPort,
-+ bgpPeerRemoteAddr,
-+ bgpPeerRemotePort,
-+ bgpPeerRemoteAs,
-+ bgpPeerInUpdates,
-+ bgpPeerOutUpdates,
-+ bgpPeerInTotalMessages,
-+ bgpPeerOutTotalMessages,
-+ bgpPeerLastError,
-+ bgpPeerFsmEstablishedTransitions,
-+ bgpPeerFsmEstablishedTime,
-+ bgpPeerConnectRetryInterval,
-+ bgpPeerHoldTime,
-+ bgpPeerKeepAlive,
-+ bgpPeerHoldTimeConfigured,
-+ bgpPeerKeepAliveConfigured,
-+ bgpPeerMinASOriginationInterval,
-+ bgpPeerMinRouteAdvertisementInterval,
-+ bgpPeerInUpdateElapsedTime }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects for managing
-+ BGP peers."
-+ ::= { bgpMIBGroups 2 }
-+
-+ bgp4MIBRcvdPathAttrGroup OBJECT-GROUP
-+ OBJECTS { bgpPathAttrPeer,
-+ bgpPathAttrDestNetwork,
-+ bgpPathAttrOrigin,
-+ bgpPathAttrASPath,
-+ bgpPathAttrNextHop,
-+ bgpPathAttrInterASMetric }
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A collection of objects for managing BGP
-+ path entries.
-+
-+ This conformance group is obsolete,
-+ replaced by bgp4MIBPathAttrGroup."
-+ ::= { bgpMIBGroups 3 }
-+
-+ bgp4MIBPathAttrGroup OBJECT-GROUP
-+ OBJECTS { bgp4PathAttrPeer,
-+ bgp4PathAttrIpAddrPrefixLen,
-+ bgp4PathAttrIpAddrPrefix,
-+ bgp4PathAttrOrigin,
-+ bgp4PathAttrASPathSegment,
-+ bgp4PathAttrNextHop,
-+ bgp4PathAttrMultiExitDisc,
-+ bgp4PathAttrLocalPref,
-+ bgp4PathAttrAtomicAggregate,
-+ bgp4PathAttrAggregatorAS,
-+ bgp4PathAttrAggregatorAddr,
-+ bgp4PathAttrCalcLocalPref,
-+ bgp4PathAttrBest,
-+ bgp4PathAttrUnknown }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of objects for managing
-+ BGP path entries."
-+ ::= { bgpMIBGroups 4 }
-+
-+ bgp4MIBNotificationGroup NOTIFICATION-GROUP
-+ NOTIFICATIONS { bgpEstablished,
-+ bgpBackwardTransition }
-+ STATUS current
-+ DESCRIPTION
-+ "A collection of notifications for signaling
-+ changes in BGP peer relationships."
-+ ::= { bgpMIBGroups 5 }
-+
-+ END
---- /dev/null
-+++ b/mibs/BRIDGE-MIB.txt
-@@ -0,0 +1,1075 @@
-+BRIDGE-MIB DEFINITIONS ::= BEGIN
-+
-+IMPORTS
-+ Counter, TimeTicks
-+ FROM RFC1155-SMI
-+ mib-2
-+ FROM RFC1213-MIB
-+ OBJECT-TYPE
-+ FROM RFC-1212
-+ TRAP-TYPE
-+ FROM RFC-1215;
-+
-+-- All representations of MAC addresses in this MIB Module
-+-- use, as a textual convention (i.e. this convention does
-+-- not affect their encoding), the data type:
-+MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
-+ -- in the
-+ -- "canonical"
-+ -- order
-+-- defined by IEEE 802.1a, i.e., as if it were transmitted
-+-- least significant bit first, even though 802.5 (in
-+-- contrast to other n802.x protocols) requires MAC
-+-- addresses to be transmitted most significant bit first.
-+--
-+-- 16-bit addresses, if needed, are represented by setting
-+-- their upper 4 octets to all 0's, i.e., AAFF would be
-+-- represented as 00000000AAFF.
-+
-+-- Similarly, all representations of Bridge-Id in this MIB
-+-- Module use, as a textual convention (i.e. this
-+-- convention does not affect their encoding), the data
-+-- type:
-+BridgeId ::= OCTET STRING (SIZE (8)) -- the
-+ -- Bridge-Identifier
-+ -- as used in the
-+ -- Spanning Tree
-+-- Protocol to uniquely identify a bridge. Its first two
-+-- octets (in network byte order) contain a priority
-+-- value and its last 6 octets contain the MAC address
-+-- used to refer to a bridge in a unique fashion
-+-- (typically, the numerically smallest MAC address
-+-- of all ports on the bridge).
-+
-+-- Several objects in this MIB module represent values of
-+-- timers used by the Spanning Tree Protocol. In this
-+-- MIB, these timers have values in units of hundreths of
-+-- a second (i.e. 1/100 secs).
-+-- These timers, when stored in a Spanning Tree Protocol's
-+-- BPDU, are in units of 1/256 seconds. Note, however,
-+-- that 802.1D-1990 specifies a settable granularity of
-+-- no more than 1 second for these timers. To avoid
-+-- ambiguity, a data type is defined here as a textual
-+-- convention and all representation of these timers
-+-- in this MIB module are defined using this data type. An
-+-- algorithm is also defined for converting between the
-+-- different units, to ensure a timer's value is not
-+-- distorted by multiple conversions.
-+-- The data type is:
-+
-+Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
-+
-+-- To convert a Timeout value into a value in units of
-+-- 1/256 seconds, the following algorithm should be used:
-+--
-+-- b = floor( (n * 256) / 100)
-+--
-+-- where:
-+-- floor = quotient [ignore remainder]
-+-- n is the value in 1/100 second units
-+-- b is the value in 1/256 second units
-+--
-+-- To convert the value from 1/256 second units back to
-+-- 1/100 seconds, the following algorithm should be used:
-+--
-+-- n = ceiling( (b * 100) / 256)
-+--
-+-- where:
-+-- ceiling = quotient [if remainder is 0], or
-+-- quotient + 1 [if remainder is non-zero]
-+-- n is the value in 1/100 second units
-+-- b is the value in 1/256 second units
-+--
-+-- Note: it is important that the arithmetic operations are
-+-- done in the order specified (i.e., multiply first, divide
-+-- second).
-+
-+ dot1dBridge OBJECT IDENTIFIER ::= { mib-2 17 }
-+
-+-- groups in the Bridge MIB
-+
-+dot1dBase OBJECT IDENTIFIER ::= { dot1dBridge 1 }
-+
-+dot1dStp OBJECT IDENTIFIER ::= { dot1dBridge 2 }
-+
-+dot1dSr OBJECT IDENTIFIER ::= { dot1dBridge 3 }
-+-- separately documented
-+
-+dot1dTp OBJECT IDENTIFIER ::= { dot1dBridge 4 }
-+
-+dot1dStatic OBJECT IDENTIFIER ::= { dot1dBridge 5 }
-+
-+-- the dot1dBase group
-+
-+-- Implementation of the dot1dBase group is mandatory for all
-+-- bridges.
-+
-+dot1dBaseBridgeAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The MAC address used by this bridge when it must
-+ be referred to in a unique fashion. It is
-+ recommended that this be the numerically smallest
-+ MAC address of all ports that belong to this
-+ bridge. However it is only required to be unique.
-+ When concatenated with dot1dStpPriority a unique
-+ BridgeIdentifier is formed which is used in the
-+ Spanning Tree Protocol."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5"
-+ ::= { dot1dBase 1 }
-+
-+dot1dBaseNumPorts OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of ports controlled by this bridging
-+ entity."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.4.1.1.3"
-+ ::= { dot1dBase 2 }
-+
-+dot1dBaseType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ unknown(1),
-+ transparent-only(2),
-+ sourceroute-only(3),
-+ srt(4)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Indicates what type of bridging this bridge can
-+ perform. If a bridge is actually performing a
-+ certain type of bridging this will be indicated by
-+ entries in the port table for the given type."
-+ ::= { dot1dBase 3 }
-+
-+-- The Generic Bridge Port Table
-+
-+dot1dBasePortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dBasePortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains generic information about
-+ every port that is associated with this bridge.
-+ Transparent, source-route, and srt ports are
-+ included."
-+ ::= { dot1dBase 4 }
-+
-+dot1dBasePortEntry OBJECT-TYPE
-+ SYNTAX Dot1dBasePortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of the
-+ bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.4.2, 6.6.1"
-+ INDEX { dot1dBasePort }
-+ ::= { dot1dBasePortTable 1 }
-+
-+Dot1dBasePortEntry ::=
-+ SEQUENCE {
-+ dot1dBasePort
-+ INTEGER,
-+ dot1dBasePortIfIndex
-+ INTEGER,
-+ dot1dBasePortCircuit
-+
-+ OBJECT IDENTIFIER,
-+ dot1dBasePortDelayExceededDiscards
-+ Counter,
-+ dot1dBasePortMtuExceededDiscards
-+ Counter
-+ }
-+
-+dot1dBasePort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains bridge management information."
-+ ::= { dot1dBasePortEntry 1 }
-+
-+dot1dBasePortIfIndex OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the instance of the ifIndex object,
-+ defined in MIB-II, for the interface corresponding
-+ to this port."
-+ ::= { dot1dBasePortEntry 2 }
-+
-+dot1dBasePortCircuit OBJECT-TYPE
-+ SYNTAX OBJECT IDENTIFIER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "For a port which (potentially) has the same value
-+ of dot1dBasePortIfIndex as another port on the
-+ same bridge, this object contains the name of an
-+ object instance unique to this port. For example,
-+ in the case where multiple ports correspond one-
-+ to-one with multiple X.25 virtual circuits, this
-+ value might identify an (e.g., the first) object
-+ instance associated with the X.25 virtual circuit
-+ corresponding to this port.
-+
-+ For a port which has a unique value of
-+ dot1dBasePortIfIndex, this object can have the
-+ value { 0 0 }."
-+ ::= { dot1dBasePortEntry 3 }
-+
-+dot1dBasePortDelayExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames discarded by this port due
-+ to excessive transit delay through the bridge. It
-+ is incremented by both transparent and source
-+ route bridges."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dBasePortEntry 4 }
-+
-+dot1dBasePortMtuExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames discarded by this port due
-+ to an excessive size. It is incremented by both
-+ transparent and source route bridges."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dBasePortEntry 5 }
-+
-+-- the dot1dStp group
-+
-+-- Implementation of the dot1dStp group is optional. It is
-+-- implemented by those bridges that support the Spanning Tree
-+-- Protocol.
-+
-+dot1dStpProtocolSpecification OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ unknown(1),
-+ decLb100(2),
-+ ieee8021d(3)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "An indication of what version of the Spanning
-+ Tree Protocol is being run. The value
-+ 'decLb100(2)' indicates the DEC LANbridge 100
-+ Spanning Tree protocol. IEEE 802.1d
-+ implementations will return 'ieee8021d(3)'. If
-+ future versions of the IEEE Spanning Tree Protocol
-+ are released that are incompatible with the
-+ current version a new value will be defined."
-+
-+ ::= { dot1dStp 1 }
-+
-+dot1dStpPriority OBJECT-TYPE
-+ SYNTAX INTEGER (0..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the write-able portion of the Bridge
-+ ID, i.e., the first two octets of the (8 octet
-+ long) Bridge ID. The other (last) 6 octets of the
-+ Bridge ID are given by the value of
-+ dot1dBaseBridgeAddress."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.7"
-+ ::= { dot1dStp 2 }
-+
-+dot1dStpTimeSinceTopologyChange OBJECT-TYPE
-+ SYNTAX TimeTicks
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The time (in hundredths of a second) since the
-+ last time a topology change was detected by the
-+ bridge entity."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
-+ ::= { dot1dStp 3 }
-+
-+dot1dStpTopChanges OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of topology changes detected by
-+ this bridge since the management entity was last
-+ reset or initialized."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
-+ ::= { dot1dStp 4 }
-+
-+dot1dStpDesignatedRoot OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The bridge identifier of the root of the spanning
-+ tree as determined by the Spanning Tree Protocol
-+ as executed by this node. This value is used as
-+
-+ the Root Identifier parameter in all Configuration
-+ Bridge PDUs originated by this node."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.1"
-+ ::= { dot1dStp 5 }
-+
-+dot1dStpRootCost OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The cost of the path to the root as seen from
-+ this bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.2"
-+ ::= { dot1dStp 6 }
-+
-+dot1dStpRootPort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port which offers the
-+ lowest cost path from this bridge to the root
-+ bridge."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.3"
-+ ::= { dot1dStp 7 }
-+
-+dot1dStpMaxAge OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum age of Spanning Tree Protocol
-+ information learned from the network on any port
-+ before it is discarded, in units of hundredths of
-+ a second. This is the actual value that this
-+ bridge is currently using."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.4"
-+ ::= { dot1dStp 8 }
-+
-+dot1dStpHelloTime OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+
-+ "The amount of time between the transmission of
-+ Configuration bridge PDUs by this node on any port
-+ when it is the root of the spanning tree or trying
-+ to become so, in units of hundredths of a second.
-+ This is the actual value that this bridge is
-+ currently using."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.5"
-+ ::= { dot1dStp 9 }
-+
-+dot1dStpHoldTime OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This time value determines the interval length
-+ during which no more than two Configuration bridge
-+ PDUs shall be transmitted by this node, in units
-+ of hundredths of a second."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.14"
-+ ::= { dot1dStp 10 }
-+
-+dot1dStpForwardDelay OBJECT-TYPE
-+ SYNTAX Timeout
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This time value, measured in units of hundredths
-+ of a second, controls how fast a port changes its
-+ spanning state when moving towards the Forwarding
-+ state. The value determines how long the port
-+ stays in each of the Listening and Learning
-+ states, which precede the Forwarding state. This
-+ value is also used, when a topology change has
-+ been detected and is underway, to age all dynamic
-+ entries in the Forwarding Database. [Note that
-+ this value is the one that this bridge is
-+ currently using, in contrast to
-+ dot1dStpBridgeForwardDelay which is the value that
-+ this bridge and all others would start using
-+ if/when this bridge were to become the root.]"
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.6"
-+ ::= { dot1dStp 11 }
-+
-+dot1dStpBridgeMaxAge OBJECT-TYPE
-+ SYNTAX Timeout (600..4000)
-+
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for MaxAge when
-+ this bridge is acting as the root. Note that
-+ 802.1D-1990 specifies that the range for this
-+ parameter is related to the value of
-+ dot1dStpBridgeHelloTime. The granularity of this
-+ timer is specified by 802.1D-1990 to be 1 second.
-+ An agent may return a badValue error if a set is
-+ attempted to a value which is not a whole number
-+ of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.8"
-+ ::= { dot1dStp 12 }
-+
-+dot1dStpBridgeHelloTime OBJECT-TYPE
-+ SYNTAX Timeout (100..1000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for HelloTime when
-+ this bridge is acting as the root. The
-+ granularity of this timer is specified by 802.1D-
-+ 1990 to be 1 second. An agent may return a
-+ badValue error if a set is attempted to a value
-+ which is not a whole number of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.9"
-+ ::= { dot1dStp 13 }
-+
-+dot1dStpBridgeForwardDelay OBJECT-TYPE
-+ SYNTAX Timeout (400..3000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value that all bridges use for ForwardDelay
-+ when this bridge is acting as the root. Note that
-+ 802.1D-1990 specifies that the range for this
-+ parameter is related to the value of
-+ dot1dStpBridgeMaxAge. The granularity of this
-+ timer is specified by 802.1D-1990 to be 1 second.
-+ An agent may return a badValue error if a set is
-+ attempted to a value which is not a whole number
-+ of seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.3.10"
-+ ::= { dot1dStp 14 }
-+
-+-- The Spanning Tree Port Table
-+
-+dot1dStpPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dStpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains port-specific information
-+ for the Spanning Tree Protocol."
-+ ::= { dot1dStp 15 }
-+
-+dot1dStpPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dStpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information maintained by every port
-+ about the Spanning Tree Protocol state for that
-+ port."
-+ INDEX { dot1dStpPort }
-+ ::= { dot1dStpPortTable 1 }
-+
-+Dot1dStpPortEntry ::=
-+ SEQUENCE {
-+ dot1dStpPort
-+ INTEGER,
-+ dot1dStpPortPriority
-+ INTEGER,
-+ dot1dStpPortState
-+ INTEGER,
-+ dot1dStpPortEnable
-+ INTEGER,
-+ dot1dStpPortPathCost
-+ INTEGER,
-+ dot1dStpPortDesignatedRoot
-+ BridgeId,
-+ dot1dStpPortDesignatedCost
-+ INTEGER,
-+ dot1dStpPortDesignatedBridge
-+ BridgeId,
-+ dot1dStpPortDesignatedPort
-+ OCTET STRING,
-+ dot1dStpPortForwardTransitions
-+ Counter
-+ }
-+
-+dot1dStpPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains Spanning Tree Protocol management
-+ information."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.8.2.1.2"
-+ ::= { dot1dStpPortEntry 1 }
-+
-+dot1dStpPortPriority OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The value of the priority field which is
-+ contained in the first (in network byte order)
-+ octet of the (2 octet long) Port ID. The other
-+ octet of the Port ID is given by the value of
-+ dot1dStpPort."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.1"
-+ ::= { dot1dStpPortEntry 2 }
-+
-+dot1dStpPortState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ disabled(1),
-+ blocking(2),
-+ listening(3),
-+ learning(4),
-+ forwarding(5),
-+ broken(6)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port's current state as defined by
-+ application of the Spanning Tree Protocol. This
-+ state controls what action a port takes on
-+ reception of a frame. If the bridge has detected
-+ a port that is malfunctioning it will place that
-+ port into the broken(6) state. For ports which
-+ are disabled (see dot1dStpPortEnable), this object
-+ will have a value of disabled(1)."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.2"
-+ ::= { dot1dStpPortEntry 3 }
-+
-+dot1dStpPortEnable OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ enabled(1),
-+ disabled(2)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The enabled/disabled status of the port."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.2"
-+ ::= { dot1dStpPortEntry 4 }
-+
-+dot1dStpPortPathCost OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The contribution of this port to the path cost of
-+ paths towards the spanning tree root which include
-+ this port. 802.1D-1990 recommends that the
-+ default value of this parameter be in inverse
-+ proportion to the speed of the attached LAN."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.3"
-+ ::= { dot1dStpPortEntry 5 }
-+
-+dot1dStpPortDesignatedRoot OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The unique Bridge Identifier of the Bridge
-+ recorded as the Root in the Configuration BPDUs
-+ transmitted by the Designated Bridge for the
-+ segment to which the port is attached."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.4"
-+ ::= { dot1dStpPortEntry 6 }
-+
-+dot1dStpPortDesignatedCost OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The path cost of the Designated Port of the
-+ segment connected to this port. This value is
-+ compared to the Root Path Cost field in received
-+
-+ bridge PDUs."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.5"
-+ ::= { dot1dStpPortEntry 7 }
-+
-+dot1dStpPortDesignatedBridge OBJECT-TYPE
-+ SYNTAX BridgeId
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The Bridge Identifier of the bridge which this
-+ port considers to be the Designated Bridge for
-+ this port's segment."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.6"
-+ ::= { dot1dStpPortEntry 8 }
-+
-+dot1dStpPortDesignatedPort OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (2))
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The Port Identifier of the port on the Designated
-+ Bridge for this port's segment."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 4.5.5.7"
-+ ::= { dot1dStpPortEntry 9 }
-+
-+dot1dStpPortForwardTransitions OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of times this port has transitioned
-+ from the Learning state to the Forwarding state."
-+ ::= { dot1dStpPortEntry 10 }
-+
-+-- the dot1dTp group
-+
-+-- Implementation of the dot1dTp group is optional. It is
-+-- implemented by those bridges that support the transparent
-+-- bridging mode. A transparent or SRT bridge will implement
-+-- this group.
-+
-+dot1dTpLearnedEntryDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of Forwarding Database entries,
-+ which have been or would have been learnt, but
-+ have been discarded due to a lack of space to
-+ store them in the Forwarding Database. If this
-+ counter is increasing, it indicates that the
-+ Forwarding Database is regularly becoming full (a
-+ condition which has unpleasant performance effects
-+ on the subnetwork). If this counter has a
-+ significant value but is not presently increasing,
-+ it indicates that the problem has been occurring
-+ but is not persistent."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.1.1.3"
-+ ::= { dot1dTp 1 }
-+
-+dot1dTpAgingTime OBJECT-TYPE
-+ SYNTAX INTEGER (10..1000000)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The timeout period in seconds for aging out
-+ dynamically learned forwarding information.
-+ 802.1D-1990 recommends a default of 300 seconds."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.1.1.3"
-+ ::= { dot1dTp 2 }
-+
-+-- The Forwarding Database for Transparent Bridges
-+
-+dot1dTpFdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dTpFdbEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about unicast
-+ entries for which the bridge has forwarding and/or
-+ filtering information. This information is used
-+ by the transparent bridging function in
-+ determining how to propagate a received frame."
-+ ::= { dot1dTp 3 }
-+
-+dot1dTpFdbEntry OBJECT-TYPE
-+ SYNTAX Dot1dTpFdbEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Information about a specific unicast MAC address
-+ for which the bridge has some forwarding and/or
-+ filtering information."
-+ INDEX { dot1dTpFdbAddress }
-+ ::= { dot1dTpFdbTable 1 }
-+
-+Dot1dTpFdbEntry ::=
-+ SEQUENCE {
-+ dot1dTpFdbAddress
-+ MacAddress,
-+ dot1dTpFdbPort
-+ INTEGER,
-+ dot1dTpFdbStatus
-+ INTEGER
-+ }
-+
-+dot1dTpFdbAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A unicast MAC address for which the bridge has
-+ forwarding and/or filtering information."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
-+ ::= { dot1dTpFdbEntry 1 }
-+
-+dot1dTpFdbPort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Either the value '0', or the port number of the
-+ port on which a frame having a source address
-+ equal to the value of the corresponding instance
-+ of dot1dTpFdbAddress has been seen. A value of
-+ '0' indicates that the port number has not been
-+ learned but that the bridge does have some
-+ forwarding/filtering information about this
-+ address (e.g. in the dot1dStaticTable).
-+ Implementors are encouraged to assign the port
-+ value to this object whenever it is learned even
-+ for addresses for which the corresponding value of
-+ dot1dTpFdbStatus is not learned(3)."
-+ ::= { dot1dTpFdbEntry 2 }
-+
-+dot1dTpFdbStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ other(1),
-+ invalid(2),
-+ learned(3),
-+ self(4),
-+ mgmt(5)
-+ }
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The status of this entry. The meanings of the
-+ values are:
-+ other(1) : none of the following. This would
-+ include the case where some other
-+ MIB object (not the corresponding
-+ instance of dot1dTpFdbPort, nor an
-+ entry in the dot1dStaticTable) is
-+ being used to determine if and how
-+ frames addressed to the value of
-+ the corresponding instance of
-+ dot1dTpFdbAddress are being
-+ forwarded.
-+ invalid(2) : this entry is not longer valid
-+ (e.g., it was learned but has since
-+ aged-out), but has not yet been
-+ flushed from the table.
-+ learned(3) : the value of the corresponding
-+ instance of dot1dTpFdbPort was
-+ learned, and is being used.
-+ self(4) : the value of the corresponding
-+ instance of dot1dTpFdbAddress
-+ represents one of the bridge's
-+ addresses. The corresponding
-+ instance of dot1dTpFdbPort
-+ indicates which of the bridge's
-+ ports has this address.
-+ mgmt(5) : the value of the corresponding
-+ instance of dot1dTpFdbAddress is
-+ also the value of an existing
-+ instance of dot1dStaticAddress."
-+ ::= { dot1dTpFdbEntry 3 }
-+
-+-- Port Table for Transparent Bridges
-+
-+dot1dTpPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dTpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+ port that is associated with this transparent
-+ bridge."
-+ ::= { dot1dTp 4 }
-+
-+dot1dTpPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dTpPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of a
-+ transparent bridge."
-+ INDEX { dot1dTpPort }
-+ ::= { dot1dTpPortTable 1 }
-+
-+Dot1dTpPortEntry ::=
-+ SEQUENCE {
-+ dot1dTpPort
-+ INTEGER,
-+ dot1dTpPortMaxInfo
-+ INTEGER,
-+ dot1dTpPortInFrames
-+ Counter,
-+ dot1dTpPortOutFrames
-+ Counter,
-+ dot1dTpPortInDiscards
-+ Counter
-+ }
-+
-+dot1dTpPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+ contains Transparent bridging management
-+ information."
-+ ::= { dot1dTpPortEntry 1 }
-+
-+-- It would be nice if we could use ifMtu as the size of the
-+-- largest INFO field, but we can't because ifMtu is defined
-+-- to be the size that the (inter-)network layer can use which
-+-- can differ from the MAC layer (especially if several layers
-+-- of encapsulation are used).
-+
-+dot1dTpPortMaxInfo OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum size of the INFO (non-MAC) field that
-+ this port will receive or transmit."
-+ ::= { dot1dTpPortEntry 2 }
-+
-+dot1dTpPortInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been received by
-+ this port from its segment. Note that a frame
-+ received on the interface corresponding to this
-+ port is only counted by this object if and only if
-+ it is for a protocol being processed by the local
-+ bridging function, including bridge management
-+ frames."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 3 }
-+
-+dot1dTpPortOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been transmitted
-+ by this port to its segment. Note that a frame
-+ transmitted on the interface corresponding to this
-+ port is only counted by this object if and only if
-+ it is for a protocol being processed by the local
-+ bridging function, including bridge management
-+ frames."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 4 }
-+
-+dot1dTpPortInDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Count of valid frames received which were
-+ discarded (i.e., filtered) by the Forwarding
-+ Process."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
-+ ::= { dot1dTpPortEntry 5 }
-+-- The Static (Destination-Address Filtering) Database
-+
-+-- Implementation of this group is optional.
-+
-+dot1dStaticTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dStaticEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table containing filtering information
-+ configured into the bridge by (local or network)
-+ management specifying the set of ports to which
-+ frames received from specific ports and containing
-+ specific destination addresses are allowed to be
-+ forwarded. The value of zero in this table as the
-+ port number from which frames with a specific
-+ destination address are received, is used to
-+ specify all ports for which there is no specific
-+ entry in this table for that particular
-+ destination address. Entries are valid for
-+ unicast and for group/broadcast addresses."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.2"
-+ ::= { dot1dStatic 1 }
-+
-+dot1dStaticEntry OBJECT-TYPE
-+ SYNTAX Dot1dStaticEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Filtering information configured into the bridge
-+ by (local or network) management specifying the
-+ set of ports to which frames received from a
-+ specific port and containing a specific
-+ destination address are allowed to be forwarded."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 6.7.2"
-+ INDEX { dot1dStaticAddress, dot1dStaticReceivePort }
-+ ::= { dot1dStaticTable 1 }
-+
-+Dot1dStaticEntry ::=
-+ SEQUENCE {
-+ dot1dStaticAddress
-+ MacAddress,
-+ dot1dStaticReceivePort
-+ INTEGER,
-+ dot1dStaticAllowedToGoTo
-+ OCTET STRING,
-+ dot1dStaticStatus
-+ INTEGER
-+ }
-+
-+dot1dStaticAddress OBJECT-TYPE
-+ SYNTAX MacAddress
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The destination MAC address in a frame to which
-+ this entry's filtering information applies. This
-+ object can take the value of a unicast address, a
-+ group address or the broadcast address."
-+ REFERENCE
-+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
-+ ::= { dot1dStaticEntry 1 }
-+
-+dot1dStaticReceivePort OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Either the value '0', or the port number of the
-+ port from which a frame must be received in order
-+ for this entry's filtering information to apply.
-+ A value of zero indicates that this entry applies
-+ on all ports of the bridge for which there is no
-+ other applicable entry."
-+ ::= { dot1dStaticEntry 2 }
-+
-+dot1dStaticAllowedToGoTo OBJECT-TYPE
-+ SYNTAX OCTET STRING
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The set of ports to which frames received from a
-+ specific port and destined for a specific MAC
-+
-+ address, are allowed to be forwarded. Each octet
-+ within the value of this object specifies a set of
-+ eight ports, with the first octet specifying ports
-+ 1 through 8, the second octet specifying ports 9
-+ through 16, etc. Within each octet, the most
-+ significant bit represents the lowest numbered
-+ port, and the least significant bit represents the
-+ highest numbered port. Thus, each port of the
-+ bridge is represented by a single bit within the
-+ value of this object. If that bit has a value of
-+ '1' then that port is included in the set of
-+ ports; the port is not included if its bit has a
-+ value of '0'. (Note that the setting of the bit
-+ corresponding to the port from which a frame is
-+ received is irrelevant.) The default value of
-+ this object is a string of ones of appropriate
-+ length."
-+ ::= { dot1dStaticEntry 3 }
-+
-+dot1dStaticStatus OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ other(1),
-+ invalid(2),
-+ permanent(3),
-+ deleteOnReset(4),
-+ deleteOnTimeout(5)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "This object indicates the status of this entry.
-+ The default value is permanent(3).
-+ other(1) - this entry is currently in use but
-+ the conditions under which it will
-+ remain so are different from each of the
-+ following values.
-+ invalid(2) - writing this value to the object
-+ removes the corresponding entry.
-+ permanent(3) - this entry is currently in use
-+ and will remain so after the next reset
-+ of the bridge.
-+ deleteOnReset(4) - this entry is currently in
-+ use and will remain so until the next
-+ reset of the bridge.
-+ deleteOnTimeout(5) - this entry is currently
-+ in use and will remain so until it is
-+ aged out."
-+
-+ ::= { dot1dStaticEntry 4 }
-+
-+-- Traps for use by Bridges
-+
-+-- Traps for the Spanning Tree Protocol
-+
-+newRoot TRAP-TYPE
-+ ENTERPRISE dot1dBridge
-+ DESCRIPTION
-+ "The newRoot trap indicates that the sending agent
-+ has become the new root of the Spanning Tree; the
-+ trap is sent by a bridge soon after its election
-+ as the new root, e.g., upon expiration of the
-+ Topology Change Timer immediately subsequent to
-+ its election. Implementation of this trap is
-+ optional."
-+ ::= 1
-+
-+topologyChange TRAP-TYPE
-+ ENTERPRISE dot1dBridge
-+ DESCRIPTION
-+ "A topologyChange trap is sent by a bridge when
-+ any of its configured ports transitions from the
-+ Learning state to the Forwarding state, or from
-+ the Forwarding state to the Blocking state. The
-+ trap is not sent if a newRoot trap is sent for the
-+ same transition. Implementation of this trap is
-+ optional."
-+ ::= 2
-+
-+END
---- /dev/null
-+++ b/mibs/GNOME-SMI.txt
-@@ -0,0 +1,88 @@
-+GNOME-SMI DEFINITIONS ::= BEGIN
-+
-+IMPORTS
-+ MODULE-IDENTITY,
-+ OBJECT-IDENTITY,
-+ enterprises
-+ FROM SNMPv2-SMI;
-+
-+gnome MODULE-IDENTITY
-+ LAST-UPDATED "200709070000Z"
-+ ORGANIZATION "GNOME project"
-+ CONTACT-INFO
-+ "GNU Network Object Model Environment project
-+
-+ see http://www.gnome.org for contact persons of a particular
-+ area or subproject of GNOME.
-+
-+ Administrative contact for MIB module:
-+
-+ Jochen Friedrich
-+ Ramsaystr. 9
-+ 63450 Hanau
-+ Germany
-+
-+ email: jochen@scram.de"
-+ DESCRIPTION
-+ "The Structure of GNOME."
-+
-+ -- revision history
-+
-+ REVISION "200709070000Z" -- Sep 07, 2007
-+ DESCRIPTION
-+ "Fixed wrong enterprise number (how comes this
-+ typo was unnoticed for so long?)."
-+
-+ REVISION "200505070000Z" -- May 07, 2005
-+ DESCRIPTION
-+ "Added gnomeLDAP subtree for LDAP definitions."
-+
-+ REVISION "200312070000Z" -- December 07, 2003
-+ DESCRIPTION
-+ "Added gnomeSysadmin subtree for GNOME project system administration.
-+ Updated contact info."
-+
-+ REVISION "9809010000Z" -- September 01, 1998
-+ DESCRIPTION
-+ "Initial version."
-+
-+ ::= { enterprises 3319 } -- assigned by IANA
-+
-+gnomeProducts OBJECT-IDENTITY
-+ STATUS current
-+ DESCRIPTION
-+ "gnomeProducts is the root OBJECT IDENTIFIER from
-+ which sysObjectID values are assigned."
-+ ::= { gnome 1 }
-+
-+gnomeMgmt OBJECT-IDENTITY
-+ STATUS current
-+ DESCRIPTION
-+ "gnomeMgmt defines the subtree for production GNOME related
-+ MIB registrations."
-+ ::= { gnome 2 }
-+
-+gnomeTest OBJECT-IDENTITY
-+ STATUS current
-+ DESCRIPTION
-+ "gnomeTest defines the subtree for testing GNOME related
-+ MIB registrations."
-+ ::= { gnome 3 }
-+
-+gnomeSysadmin OBJECT-IDENTITY
-+ STATUS current
-+ DESCRIPTION
-+ "gnomeSysadmin defines the subtree for GNOME related Sysadmin
-+ MIB registrations."
-+ ::= { gnome 4 }
-+
-+gnomeLDAP OBJECT-IDENTITY
-+ STATUS current
-+ DESCRIPTION
-+ "gnomeLDAP defines the subtree for GNOME related LDAP
-+ registrations."
-+ ::= { gnome 5 }
-+
-+-- more to come if necessary.
-+
-+END
---- /dev/null
-+++ b/mibs/OSPF-MIB.txt
-@@ -0,0 +1,2723 @@
-+OSPF-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
-+ Integer32, IpAddress
-+ FROM SNMPv2-SMI
-+ TEXTUAL-CONVENTION, TruthValue, RowStatus
-+ FROM SNMPv2-TC
-+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
-+ mib-2 FROM RFC1213-MIB;
-+
-+-- This MIB module uses the extended OBJECT-TYPE macro as
-+-- defined in [9].
-+
-+ospf MODULE-IDENTITY
-+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
-+ ORGANIZATION "IETF OSPF Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fred@cisco.com
-+
-+ Rob Coltun
-+ Postal: RainbowBridge Communications
-+ Tel: (301) 340-9416
-+ E-Mail: rcoltun@rainbow-bridge.com"
-+ DESCRIPTION
-+ "The MIB module to describe the OSPF Version 2
-+ Protocol"
-+ ::= { mib-2 14 }
-+
-+-- The Area ID, in OSPF, has the same format as an IP Address,
-+-- but has the function of defining a summarization point for
-+-- Link State Advertisements
-+
-+AreaID ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "An OSPF Area Identifier."
-+ SYNTAX IpAddress
-+
-+
-+-- The Router ID, in OSPF, has the same format as an IP Address,
-+-- but identifies the router independent of its IP Address.
-+
-+RouterID ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "A OSPF Router Identifier."
-+ SYNTAX IpAddress
-+
-+
-+-- The OSPF Metric is defined as an unsigned value in the range
-+
-+Metric ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Internal Metric."
-+ SYNTAX Integer32 (0..'FFFF'h)
-+
-+BigMetric ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF External Metric."
-+ SYNTAX Integer32 (0..'FFFFFF'h)
-+
-+-- Status Values
-+
-+Status ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The status of an interface: 'enabled' indicates that
-+ it is willing to communicate with other OSPF Routers,
-+ while 'disabled' indicates that it is not."
-+ SYNTAX INTEGER { enabled (1), disabled (2) }
-+
-+-- Time Durations measured in seconds
-+
-+PositiveInteger ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "A positive integer. Values in excess are precluded as
-+ unnecessary and prone to interoperability issues."
-+ SYNTAX Integer32 (0..'7FFFFFFF'h)
-+
-+HelloRange ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The range of intervals on which hello messages are
-+ exchanged."
-+ SYNTAX Integer32 (1..'FFFF'h)
-+
-+UpToMaxAge ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The values that one might find or configure for
-+ variables bounded by the maximum age of an LSA."
-+ SYNTAX Integer32 (0..3600)
-+
-+
-+-- The range of ifIndex
-+
-+InterfaceIndex ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The range of ifIndex."
-+ SYNTAX Integer32
-+
-+
-+-- Potential Priorities for the Designated Router Election
-+
-+DesignatedRouterPriority ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "The values defined for the priority of a system for
-+ becoming the designated router."
-+ SYNTAX Integer32 (0..'FF'h)
-+
-+TOSType ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "Type of Service is defined as a mapping to the IP Type of
-+ Service Flags as defined in the IP Forwarding Table MIB
-+
-+ +-----+-----+-----+-----+-----+-----+-----+-----+
-+ | | | |
-+ | PRECEDENCE | TYPE OF SERVICE | 0 |
-+ | | | |
-+ +-----+-----+-----+-----+-----+-----+-----+-----+
-+
-+ IP TOS IP TOS
-+ Field Policy Field Policy
-+
-+ Contents Code Contents Code
-+ 0 0 0 0 ==> 0 0 0 0 1 ==> 2
-+ 0 0 1 0 ==> 4 0 0 1 1 ==> 6
-+ 0 1 0 0 ==> 8 0 1 0 1 ==> 10
-+ 0 1 1 0 ==> 12 0 1 1 1 ==> 14
-+ 1 0 0 0 ==> 16 1 0 0 1 ==> 18
-+ 1 0 1 0 ==> 20 1 0 1 1 ==> 22
-+ 1 1 0 0 ==> 24 1 1 0 1 ==> 26
-+ 1 1 1 0 ==> 28 1 1 1 1 ==> 30
-+
-+ The remaining values are left for future definition."
-+ SYNTAX Integer32 (0..30)
-+
-+
-+-- OSPF General Variables
-+
-+-- These parameters apply globally to the Router's
-+-- OSPF Process.
-+
-+ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 }
-+
-+
-+ ospfRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the
-+ router in the Autonomous System.
-+
-+ By convention, to ensure uniqueness, this
-+ should default to the value of one of the
-+ router's IP interface addresses."
-+ REFERENCE
-+ "OSPF Version 2, C.1 Global parameters"
-+ ::= { ospfGeneralGroup 1 }
-+
-+
-+ ospfAdminStat OBJECT-TYPE
-+ SYNTAX Status
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The administrative status of OSPF in the
-+ router. The value 'enabled' denotes that the
-+ OSPF Process is active on at least one inter-
-+ face; 'disabled' disables it on all inter-
-+ faces."
-+ ::= { ospfGeneralGroup 2 }
-+
-+ ospfVersionNumber OBJECT-TYPE
-+ SYNTAX INTEGER { version2 (2) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current version number of the OSPF proto-
-+ col is 2."
-+ REFERENCE
-+ "OSPF Version 2, Title"
-+ ::= { ospfGeneralGroup 3 }
-+
-+
-+ ospfAreaBdrRtrStatus OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A flag to note whether this router is an area
-+ border router."
-+ REFERENCE
-+ "OSPF Version 2, Section 3 Splitting the AS into
-+ Areas"
-+ ::= { ospfGeneralGroup 4 }
-+
-+
-+ ospfASBdrRtrStatus OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A flag to note whether this router is config-
-+ ured as an Autonomous System border router."
-+ REFERENCE
-+ "OSPF Version 2, Section 3.3 Classification of
-+ routers"
-+ ::= { ospfGeneralGroup 5 }
-+
-+ ospfExternLsaCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of external (LS type 5) link-state
-+ advertisements in the link-state database."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.5 AS external link
-+ advertisements"
-+ ::= { ospfGeneralGroup 6 }
-+
-+
-+ ospfExternLsaCksumSum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32-bit unsigned sum of the LS checksums of
-+ the external link-state advertisements con-
-+ tained in the link-state database. This sum
-+ can be used to determine if there has been a
-+ change in a router's link state database, and
-+ to compare the link-state database of two
-+ routers."
-+ ::= { ospfGeneralGroup 7 }
-+
-+
-+ ospfTOSSupport OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The router's support for type-of-service rout-
-+ ing."
-+ REFERENCE
-+ "OSPF Version 2, Appendix F.1.2 Optional TOS
-+ support"
-+ ::= { ospfGeneralGroup 8 }
-+
-+ ospfOriginateNewLsas OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of new link-state advertisements
-+ that have been originated. This number is in-
-+ cremented each time the router originates a new
-+ LSA."
-+ ::= { ospfGeneralGroup 9 }
-+
-+
-+ ospfRxNewLsas OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of link-state advertisements re-
-+ ceived determined to be new instantiations.
-+ This number does not include newer instantia-
-+ tions of self-originated link-state advertise-
-+ ments."
-+ ::= { ospfGeneralGroup 10 }
-+
-+ ospfExtLsdbLimit OBJECT-TYPE
-+ SYNTAX Integer32 (-1..'7FFFFFFF'h)
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The maximum number of non-default AS-
-+ external-LSAs entries that can be stored in the
-+ link-state database. If the value is -1, then
-+ there is no limit.
-+
-+ When the number of non-default AS-external-LSAs
-+ in a router's link-state database reaches
-+ ospfExtLsdbLimit, the router enters Overflow-
-+ State. The router never holds more than
-+ ospfExtLsdbLimit non-default AS-external-LSAs
-+ in its database. OspfExtLsdbLimit MUST be set
-+ identically in all routers attached to the OSPF
-+ backbone and/or any regular OSPF area. (i.e.,
-+ OSPF stub areas and NSSAs are excluded)."
-+ DEFVAL { -1 }
-+ ::= { ospfGeneralGroup 11 }
-+
-+ ospfMulticastExtensions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask indicating whether the router is
-+ forwarding IP multicast (Class D) datagrams
-+ based on the algorithms defined in the Multi-
-+ cast Extensions to OSPF.
-+
-+ Bit 0, if set, indicates that the router can
-+ forward IP multicast datagrams in the router's
-+ directly attached areas (called intra-area mul-
-+ ticast routing).
-+
-+ Bit 1, if set, indicates that the router can
-+ forward IP multicast datagrams between OSPF
-+ areas (called inter-area multicast routing).
-+
-+ Bit 2, if set, indicates that the router can
-+ forward IP multicast datagrams between Auto-
-+ nomous Systems (called inter-AS multicast rout-
-+ ing).
-+
-+ Only certain combinations of bit settings are
-+ allowed, namely: 0 (no multicast forwarding is
-+ enabled), 1 (intra-area multicasting only), 3
-+ (intra-area and inter-area multicasting), 5
-+ (intra-area and inter-AS multicasting) and 7
-+ (multicasting everywhere). By default, no mul-
-+ ticast forwarding is enabled."
-+ DEFVAL { 0 }
-+ ::= { ospfGeneralGroup 12 }
-+
-+ ospfExitOverflowInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that, after entering
-+ OverflowState, a router will attempt to leave
-+ OverflowState. This allows the router to again
-+ originate non-default AS-external-LSAs. When
-+ set to 0, the router will not leave Overflow-
-+ State until restarted."
-+ DEFVAL { 0 }
-+ ::= { ospfGeneralGroup 13 }
-+
-+
-+ ospfDemandExtensions OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "The router's support for demand routing."
-+ REFERENCE
-+ "OSPF Version 2, Appendix on Demand Routing"
-+ ::= { ospfGeneralGroup 14 }
-+
-+
-+-- The OSPF Area Data Structure contains information
-+-- regarding the various areas. The interfaces and
-+-- virtual links are configured as part of these areas.
-+-- Area 0.0.0.0, by definition, is the Backbone Area
-+
-+
-+ ospfAreaTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information describing the configured parame-
-+ ters and cumulative statistics of the router's
-+ attached areas."
-+ REFERENCE
-+ "OSPF Version 2, Section 6 The Area Data Struc-
-+ ture"
-+ ::= { ospf 2 }
-+
-+
-+ ospfAreaEntry OBJECT-TYPE
-+ SYNTAX OspfAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information describing the configured parame-
-+ ters and cumulative statistics of one of the
-+ router's attached areas."
-+ INDEX { ospfAreaId }
-+ ::= { ospfAreaTable 1 }
-+
-+OspfAreaEntry ::=
-+ SEQUENCE {
-+ ospfAreaId
-+ AreaID,
-+ ospfAuthType
-+ Integer32,
-+ ospfImportAsExtern
-+ INTEGER,
-+ ospfSpfRuns
-+ Counter32,
-+ ospfAreaBdrRtrCount
-+ Gauge32,
-+ ospfAsBdrRtrCount
-+ Gauge32,
-+ ospfAreaLsaCount
-+ Gauge32,
-+ ospfAreaLsaCksumSum
-+ Integer32,
-+ ospfAreaSummary
-+ INTEGER,
-+ ospfAreaStatus
-+ RowStatus
-+ }
-+
-+ ospfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying an area.
-+ Area ID 0.0.0.0 is used for the OSPF backbone."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaEntry 1 }
-+
-+
-+ ospfAuthType OBJECT-TYPE
-+ SYNTAX Integer32
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The authentication type specified for an area.
-+ Additional authentication types may be assigned
-+ locally on a per Area basis."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfAreaEntry 2 }
-+
-+ ospfImportAsExtern OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ importExternal (1),
-+ importNoExternal (2),
-+ importNssa (3)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The area's support for importing AS external
-+ link- state advertisements."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ DEFVAL { importExternal }
-+ ::= { ospfAreaEntry 3 }
-+
-+
-+ ospfSpfRuns OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times that the intra-area route
-+ table has been calculated using this area's
-+ link-state database. This is typically done
-+ using Dijkstra's algorithm."
-+ ::= { ospfAreaEntry 4 }
-+
-+
-+ ospfAreaBdrRtrCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of area border routers reach-
-+ able within this area. This is initially zero,
-+ and is calculated in each SPF Pass."
-+ ::= { ospfAreaEntry 5 }
-+
-+ ospfAsBdrRtrCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of Autonomous System border
-+ routers reachable within this area. This is
-+ initially zero, and is calculated in each SPF
-+ Pass."
-+ ::= { ospfAreaEntry 6 }
-+
-+
-+ ospfAreaLsaCount OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The total number of link-state advertisements
-+ in this area's link-state database, excluding
-+ AS External LSA's."
-+ ::= { ospfAreaEntry 7 }
-+
-+
-+ ospfAreaLsaCksumSum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32-bit unsigned sum of the link-state ad-
-+ vertisements' LS checksums contained in this
-+ area's link-state database. This sum excludes
-+ external (LS type 5) link-state advertisements.
-+ The sum can be used to determine if there has
-+ been a change in a router's link state data-
-+ base, and to compare the link-state database of
-+ two routers."
-+ DEFVAL { 0 }
-+ ::= { ospfAreaEntry 8 }
-+
-+ ospfAreaSummary OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ noAreaSummary (1),
-+ sendAreaSummary (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The variable ospfAreaSummary controls the im-
-+ port of summary LSAs into stub areas. It has
-+ no effect on other areas.
-+
-+ If it is noAreaSummary, the router will neither
-+ originate nor propagate summary LSAs into the
-+ stub area. It will rely entirely on its de-
-+ fault route.
-+
-+ If it is sendAreaSummary, the router will both
-+ summarize and propagate summary LSAs."
-+ DEFVAL { noAreaSummary }
-+ ::= { ospfAreaEntry 9 }
-+
-+
-+ ospfAreaStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaEntry 10 }
-+
-+
-+-- OSPF Area Default Metric Table
-+
-+-- The OSPF Area Default Metric Table describes the metrics
-+-- that a default Area Border Router will advertise into a
-+-- Stub area.
-+
-+
-+ ospfStubAreaTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfStubAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The set of metrics that will be advertised by
-+ a default Area Border Router into a stub area."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2, Area Parameters"
-+ ::= { ospf 3 }
-+
-+
-+ ospfStubAreaEntry OBJECT-TYPE
-+ SYNTAX OspfStubAreaEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The metric for a given Type of Service that
-+ will be advertised by a default Area Border
-+ Router into a stub area."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2, Area Parameters"
-+ INDEX { ospfStubAreaId, ospfStubTOS }
-+ ::= { ospfStubAreaTable 1 }
-+
-+OspfStubAreaEntry ::=
-+ SEQUENCE {
-+ ospfStubAreaId
-+ AreaID,
-+ ospfStubTOS
-+ TOSType,
-+ ospfStubMetric
-+ BigMetric,
-+ ospfStubStatus
-+ RowStatus,
-+ ospfStubMetricType
-+ INTEGER
-+ }
-+
-+ ospfStubAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit identifier for the Stub Area. On
-+ creation, this can be derived from the in-
-+ stance."
-+ ::= { ospfStubAreaEntry 1 }
-+
-+
-+ ospfStubTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Type of Service associated with the
-+ metric. On creation, this can be derived from
-+ the instance."
-+ ::= { ospfStubAreaEntry 2 }
-+
-+
-+ ospfStubMetric OBJECT-TYPE
-+ SYNTAX BigMetric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The metric value applied at the indicated type
-+ of service. By default, this equals the least
-+ metric at the type of service among the inter-
-+ faces to other areas."
-+ ::= { ospfStubAreaEntry 3 }
-+
-+
-+ ospfStubStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfStubAreaEntry 4 }
-+
-+ ospfStubMetricType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ ospfMetric (1), -- OSPF Metric
-+ comparableCost (2), -- external type 1
-+ nonComparable (3) -- external type 2
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the type of metric ad-
-+ vertised as a default route."
-+ DEFVAL { ospfMetric }
-+ ::= { ospfStubAreaEntry 5 }
-+
-+-- OSPF Link State Database
-+
-+-- The Link State Database contains the Link State
-+-- Advertisements from throughout the areas that the
-+-- device is attached to.
-+
-+
-+ ospfLsdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Process's Link State Database."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospf 4 }
-+
-+
-+ ospfLsdbEntry OBJECT-TYPE
-+ SYNTAX OspfLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A single Link State Advertisement."
-+ INDEX { ospfLsdbAreaId, ospfLsdbType,
-+ ospfLsdbLsid, ospfLsdbRouterId }
-+ ::= { ospfLsdbTable 1 }
-+
-+OspfLsdbEntry ::=
-+ SEQUENCE {
-+ ospfLsdbAreaId
-+ AreaID,
-+ ospfLsdbType
-+ INTEGER,
-+ ospfLsdbLsid
-+ IpAddress,
-+ ospfLsdbRouterId
-+ RouterID,
-+ ospfLsdbSequence
-+ Integer32,
-+ ospfLsdbAge
-+ Integer32,
-+ ospfLsdbChecksum
-+ Integer32,
-+ ospfLsdbAdvertisement
-+ OCTET STRING
-+ }
-+ ospfLsdbAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit identifier of the Area from which
-+ the LSA was received."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfLsdbEntry 1 }
-+
-+-- External Link State Advertisements are permitted
-+-- for backward compatibility, but should be displayed in
-+-- the ospfExtLsdbTable rather than here.
-+
-+ ospfLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ routerLink (1),
-+ networkLink (2),
-+ summaryLink (3),
-+ asSummaryLink (4),
-+ asExternalLink (5), -- but see ospfExtLsdbTable
-+ multicastLink (6),
-+ nssaExternalLink (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the link state advertisement.
-+ Each link state type has a separate advertise-
-+ ment format."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfLsdbEntry 2 }
-+
-+ ospfLsdbLsid OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Link State ID is an LS Type Specific field
-+ containing either a Router ID or an IP Address;
-+ it identifies the piece of the routing domain
-+ that is being described by the advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.4 Link State ID"
-+ ::= { ospfLsdbEntry 3 }
-+ ospfLsdbRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit number that uniquely identifies the
-+ originating router in the Autonomous System."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.1 Global parameters"
-+ ::= { ospfLsdbEntry 4 }
-+
-+-- Note that the OSPF Sequence Number is a 32 bit signed
-+-- integer. It starts with the value '80000001'h,
-+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-+-- Thus, a typical sequence number will be very negative.
-+
-+ ospfLsdbSequence OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence number field is a signed 32-bit
-+ integer. It is used to detect old and dupli-
-+ cate link state advertisements. The space of
-+ sequence numbers is linearly ordered. The
-+ larger the sequence number the more recent the
-+ advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.6 LS sequence
-+ number"
-+ ::= { ospfLsdbEntry 5 }
-+
-+
-+ ospfLsdbAge OBJECT-TYPE
-+ SYNTAX Integer32 -- Should be 0..MaxAge
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the age of the link state adver-
-+ tisement in seconds."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.1 LS age"
-+ ::= { ospfLsdbEntry 6 }
-+
-+ ospfLsdbChecksum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the checksum of the complete
-+ contents of the advertisement, excepting the
-+ age field. The age field is excepted so that
-+ an advertisement's age can be incremented
-+ without updating the checksum. The checksum
-+ used is the same that is used for ISO connec-
-+ tionless datagrams; it is commonly referred to
-+ as the Fletcher checksum."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.7 LS checksum"
-+ ::= { ospfLsdbEntry 7 }
-+
-+
-+ ospfLsdbAdvertisement OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (1..65535))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The entire Link State Advertisement, including
-+ its header."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospfLsdbEntry 8 }
-+
-+
-+-- Address Range Table
-+
-+-- The Address Range Table acts as an adjunct to the Area
-+-- Table; It describes those Address Range Summaries that
-+-- are configured to be propagated from an Area to reduce
-+-- the amount of information about it which is known beyond
-+-- its borders.
-+
-+ ospfAreaRangeTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaRangeEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A range if IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospf 5 }
-+ ospfAreaRangeEntry OBJECT-TYPE
-+ SYNTAX OspfAreaRangeEntry
-+ MAX-ACCESS not-accessible
-+ STATUS obsolete
-+ DESCRIPTION
-+ "A range if IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet }
-+ ::= { ospfAreaRangeTable 1 }
-+
-+OspfAreaRangeEntry ::=
-+ SEQUENCE {
-+ ospfAreaRangeAreaId
-+ AreaID,
-+ ospfAreaRangeNet
-+ IpAddress,
-+ ospfAreaRangeMask
-+ IpAddress,
-+ ospfAreaRangeStatus
-+ RowStatus,
-+ ospfAreaRangeEffect
-+ INTEGER
-+ }
-+
-+ ospfAreaRangeAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The Area the Address Range is to be found
-+ within."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 1 }
-+
-+
-+ ospfAreaRangeNet OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The IP Address of the Net or Subnet indicated
-+ by the range."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 2 }
-+
-+
-+ ospfAreaRangeMask OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "The Subnet Mask that pertains to the Net or
-+ Subnet."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaRangeEntry 3 }
-+
-+ ospfAreaRangeStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaRangeEntry 4 }
-+
-+
-+ ospfAreaRangeEffect OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ advertiseMatching (1),
-+ doNotAdvertiseMatching (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Subnets subsumed by ranges either trigger the
-+ advertisement of the indicated summary (adver-
-+ tiseMatching), or result in the subnet's not
-+ being advertised at all outside the area."
-+ DEFVAL { advertiseMatching }
-+ ::= { ospfAreaRangeEntry 5 }
-+
-+
-+
-+-- OSPF Host Table
-+
-+-- The Host/Metric Table indicates what hosts are directly
-+-- attached to the Router, and what metrics and types of
-+-- service should be advertised for them.
-+
-+ ospfHostTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfHostEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The list of Hosts, and their metrics, that the
-+ router will advertise as host routes."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route param-
-+ eters"
-+ ::= { ospf 6 }
-+
-+
-+ ospfHostEntry OBJECT-TYPE
-+ SYNTAX OspfHostEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A metric to be advertised, for a given type of
-+ service, when a given host is reachable."
-+ INDEX { ospfHostIpAddress, ospfHostTOS }
-+ ::= { ospfHostTable 1 }
-+
-+OspfHostEntry ::=
-+ SEQUENCE {
-+ ospfHostIpAddress
-+ IpAddress,
-+ ospfHostTOS
-+ TOSType,
-+ ospfHostMetric
-+ Metric,
-+ ospfHostStatus
-+ RowStatus,
-+ ospfHostAreaID
-+ AreaID
-+ }
-+
-+ ospfHostIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Host."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 1 }
-+
-+
-+ ospfHostTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Type of Service of the route being config-
-+ ured."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 2 }
-+
-+
-+ ospfHostMetric OBJECT-TYPE
-+ SYNTAX Metric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The Metric to be advertised."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.6 Host route parame-
-+ ters"
-+ ::= { ospfHostEntry 3 }
-+
-+ ospfHostStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfHostEntry 4 }
-+
-+
-+ ospfHostAreaID OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Area the Host Entry is to be found within.
-+ By default, the area that a subsuming OSPF in-
-+ terface is in, or 0.0.0.0"
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfHostEntry 5 }
-+
-+
-+-- OSPF Interface Table
-+
-+-- The OSPF Interface Table augments the ipAddrTable
-+-- with OSPF specific information.
-+
-+ ospfIfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface Table describes the inter-
-+ faces from the viewpoint of OSPF."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ ::= { ospf 7 }
-+
-+
-+ ospfIfEntry OBJECT-TYPE
-+ SYNTAX OspfIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface Entry describes one inter-
-+ face from the viewpoint of OSPF."
-+ INDEX { ospfIfIpAddress, ospfAddressLessIf }
-+ ::= { ospfIfTable 1 }
-+
-+OspfIfEntry ::=
-+ SEQUENCE {
-+ ospfIfIpAddress
-+ IpAddress,
-+ ospfAddressLessIf
-+ Integer32,
-+ ospfIfAreaId
-+ AreaID,
-+ ospfIfType
-+ INTEGER,
-+ ospfIfAdminStat
-+ Status,
-+ ospfIfRtrPriority
-+ DesignatedRouterPriority,
-+ ospfIfTransitDelay
-+ UpToMaxAge,
-+ ospfIfRetransInterval
-+ UpToMaxAge,
-+ ospfIfHelloInterval
-+ HelloRange,
-+ ospfIfRtrDeadInterval
-+ PositiveInteger,
-+ ospfIfPollInterval
-+ PositiveInteger,
-+ ospfIfState
-+ INTEGER,
-+ ospfIfDesignatedRouter
-+ IpAddress,
-+ ospfIfBackupDesignatedRouter
-+ IpAddress,
-+ ospfIfEvents
-+ Counter32,
-+ ospfIfAuthType
-+ INTEGER,
-+ ospfIfAuthKey
-+ OCTET STRING,
-+ ospfIfStatus
-+ RowStatus,
-+ ospfIfMulticastForwarding
-+ INTEGER,
-+ ospfIfDemand
-+ TruthValue
-+ }
-+
-+ ospfIfIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of this OSPF interface."
-+ ::= { ospfIfEntry 1 }
-+
-+ ospfAddressLessIf OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "For the purpose of easing the instancing of
-+ addressed and addressless interfaces; This
-+ variable takes the value 0 on interfaces with
-+ IP Addresses, and the corresponding value of
-+ ifIndex for interfaces having no IP Address."
-+ ::= { ospfIfEntry 2 }
-+ ospfIfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the area
-+ to which the interface connects. Area ID
-+ 0.0.0.0 is used for the OSPF backbone."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 3 }
-+
-+ ospfIfType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ broadcast (1),
-+ nbma (2),
-+ pointToPoint (3),
-+ pointToMultipoint (5)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF interface type.
-+
-+ By way of a default, this field may be intuited
-+ from the corresponding value of ifType. Broad-
-+ cast LANs, such as Ethernet and IEEE 802.5,
-+ take the value 'broadcast', X.25 and similar
-+ technologies take the value 'nbma', and links
-+ that are definitively point to point take the
-+ value 'pointToPoint'."
-+ ::= { ospfIfEntry 4 }
-+
-+
-+ ospfIfAdminStat OBJECT-TYPE
-+ SYNTAX Status
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF interface's administrative status.
-+ The value formed on the interface, and the in-
-+ terface will be advertised as an internal route
-+ to some area. The value 'disabled' denotes
-+ that the interface is external to OSPF."
-+ DEFVAL { enabled }
-+ ::= { ospfIfEntry 5 }
-+
-+ ospfIfRtrPriority OBJECT-TYPE
-+ SYNTAX DesignatedRouterPriority
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The priority of this interface. Used in
-+ multi-access networks, this field is used in
-+ the designated router election algorithm. The
-+ value 0 signifies that the router is not eligi-
-+ ble to become the designated router on this
-+ particular network. In the event of a tie in
-+ this value, routers will use their Router ID as
-+ a tie breaker."
-+ DEFVAL { 1 }
-+ ::= { ospfIfEntry 6 }
-+
-+
-+ ospfIfTransitDelay OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The estimated number of seconds it takes to
-+ transmit a link state update packet over this
-+ interface."
-+ DEFVAL { 1 }
-+ ::= { ospfIfEntry 7 }
-+
-+
-+ ospfIfRetransInterval OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds between link-state ad-
-+ vertisement retransmissions, for adjacencies
-+ belonging to this interface. This value is
-+ also used when retransmitting database descrip-
-+ tion and link-state request packets."
-+ DEFVAL { 5 }
-+ ::= { ospfIfEntry 8 }
-+
-+
-+ ospfIfHelloInterval OBJECT-TYPE
-+ SYNTAX HelloRange
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The length of time, in seconds, between the
-+ Hello packets that the router sends on the in-
-+ terface. This value must be the same for all
-+ routers attached to a common network."
-+ DEFVAL { 10 }
-+ ::= { ospfIfEntry 9 }
-+
-+
-+ ospfIfRtrDeadInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that a router's Hello
-+ packets have not been seen before it's neigh-
-+ bors declare the router down. This should be
-+ some multiple of the Hello interval. This
-+ value must be the same for all routers attached
-+ to a common network."
-+ DEFVAL { 40 }
-+ ::= { ospfIfEntry 10 }
-+
-+
-+ ospfIfPollInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The larger time interval, in seconds, between
-+ the Hello packets sent to an inactive non-
-+ broadcast multi- access neighbor."
-+ DEFVAL { 120 }
-+ ::= { ospfIfEntry 11 }
-+
-+
-+ ospfIfState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ loopback (2),
-+ waiting (3),
-+ pointToPoint (4),
-+ designatedRouter (5),
-+ backupDesignatedRouter (6),
-+ otherDesignatedRouter (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Interface State."
-+ DEFVAL { down }
-+ ::= { ospfIfEntry 12 }
-+
-+
-+ ospfIfDesignatedRouter OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Designated Router."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 13 }
-+
-+
-+ ospfIfBackupDesignatedRouter OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Backup Designated
-+ Router."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfIfEntry 14 }
-+
-+ ospfIfEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this OSPF interface has
-+ changed its state, or an error has occurred."
-+ ::= { ospfIfEntry 15 }
-+
-+
-+ ospfIfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE (0..256))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The Authentication Key. If the Area's Author-
-+ ization Type is simplePassword, and the key
-+ length is shorter than 8 octets, the agent will
-+ left adjust and zero fill to 8 octets.
-+
-+ Note that unauthenticated interfaces need no
-+ authentication key, and simple password authen-
-+ tication cannot use a key of more than 8 oc-
-+ tets. Larger keys are useful only with authen-
-+ tication mechanisms not specified in this docu-
-+ ment.
-+
-+ When read, ospfIfAuthKey always returns an Oc-
-+ tet String of length zero."
-+ REFERENCE
-+ "OSPF Version 2, Section 9 The Interface Data
-+ Structure"
-+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
-+ ::= { ospfIfEntry 16 }
-+
-+ ospfIfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfIfEntry 17 }
-+
-+
-+ ospfIfMulticastForwarding OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ blocked (1), -- no multicast forwarding
-+ multicast (2), -- using multicast address
-+ unicast (3) -- to each OSPF neighbor
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The way multicasts should forwarded on this
-+ interface; not forwarded, forwarded as data
-+ link multicasts, or forwarded as data link uni-
-+ casts. Data link multicasting is not meaning-
-+ ful on point to point and NBMA interfaces, and
-+ setting ospfMulticastForwarding to 0 effective-
-+ ly disables all multicast forwarding."
-+ DEFVAL { blocked }
-+ ::= { ospfIfEntry 18 }
-+
-+
-+ ospfIfDemand OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Demand OSPF procedures (hel-
-+ lo supression to FULL neighbors and setting the
-+ DoNotAge flag on proogated LSAs) should be per-
-+ formed on this interface."
-+ DEFVAL { false }
-+ ::= { ospfIfEntry 19 }
-+
-+
-+ ospfIfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The authentication type specified for an in-
-+ terface. Additional authentication types may
-+ be assigned locally."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfIfEntry 20 }
-+
-+
-+-- OSPF Interface Metric Table
-+
-+-- The Metric Table describes the metrics to be advertised
-+-- for a specified interface at the various types of service.
-+-- As such, this table is an adjunct of the OSPF Interface
-+-- Table.
-+
-+-- Types of service, as defined by RFC 791, have the ability
-+-- to request low delay, high bandwidth, or reliable linkage.
-+
-+-- For the purposes of this specification, the measure of
-+-- bandwidth
-+
-+-- Metric = 10^8 / ifSpeed
-+
-+-- is the default value. For multiple link interfaces, note
-+-- that ifSpeed is the sum of the individual link speeds.
-+-- This yields a number having the following typical values:
-+
-+-- Network Type/bit rate Metric
-+
-+-- >= 100 MBPS 1
-+-- Ethernet/802.3 10
-+-- E1 48
-+-- T1 (ESF) 65
-+-- 64 KBPS 1562
-+-- 56 KBPS 1785
-+-- 19.2 KBPS 5208
-+-- 9.6 KBPS 10416
-+
-+-- Routes that are not specified use the default (TOS 0) metric
-+
-+ ospfIfMetricTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfIfMetricEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The TOS metrics for a non-virtual interface
-+ identified by the interface index."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ ::= { ospf 8 }
-+
-+ ospfIfMetricEntry OBJECT-TYPE
-+ SYNTAX OspfIfMetricEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A particular TOS metric for a non-virtual in-
-+ terface identified by the interface index."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.3 Router interface
-+ parameters"
-+ INDEX { ospfIfMetricIpAddress,
-+ ospfIfMetricAddressLessIf,
-+ ospfIfMetricTOS }
-+ ::= { ospfIfMetricTable 1 }
-+
-+OspfIfMetricEntry ::=
-+ SEQUENCE {
-+ ospfIfMetricIpAddress
-+ IpAddress,
-+ ospfIfMetricAddressLessIf
-+ Integer32,
-+ ospfIfMetricTOS
-+ TOSType,
-+ ospfIfMetricValue
-+ Metric,
-+ ospfIfMetricStatus
-+ RowStatus
-+ }
-+
-+ ospfIfMetricIpAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of this OSPF interface. On row
-+ creation, this can be derived from the in-
-+ stance."
-+ ::= { ospfIfMetricEntry 1 }
-+
-+ ospfIfMetricAddressLessIf OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "For the purpose of easing the instancing of
-+ addressed and addressless interfaces; This
-+ variable takes the value 0 on interfaces with
-+ IP Addresses, and the value of ifIndex for in-
-+ terfaces having no IP Address. On row crea-
-+ tion, this can be derived from the instance."
-+ ::= { ospfIfMetricEntry 2 }
-+
-+
-+ ospfIfMetricTOS OBJECT-TYPE
-+ SYNTAX TOSType
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of service metric being referenced.
-+ On row creation, this can be derived from the
-+ instance."
-+ ::= { ospfIfMetricEntry 3 }
-+
-+
-+ ospfIfMetricValue OBJECT-TYPE
-+ SYNTAX Metric
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The metric of using this type of service on
-+ this interface. The default value of the TOS 0
-+ Metric is 10^8 / ifSpeed."
-+ ::= { ospfIfMetricEntry 4 }
-+
-+ ospfIfMetricStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfIfMetricEntry 5 }
-+
-+
-+-- OSPF Virtual Interface Table
-+
-+-- The Virtual Interface Table describes the virtual
-+-- links that the OSPF Process is configured to
-+-- carry on.
-+
-+ ospfVirtIfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfVirtIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about this router's virtual inter-
-+ faces."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.4 Virtual link
-+ parameters"
-+ ::= { ospf 9 }
-+
-+
-+ ospfVirtIfEntry OBJECT-TYPE
-+ SYNTAX OspfVirtIfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information about a single Virtual Interface."
-+ INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor }
-+ ::= { ospfVirtIfTable 1 }
-+
-+OspfVirtIfEntry ::=
-+ SEQUENCE {
-+ ospfVirtIfAreaId
-+ AreaID,
-+ ospfVirtIfNeighbor
-+ RouterID,
-+ ospfVirtIfTransitDelay
-+ UpToMaxAge,
-+ ospfVirtIfRetransInterval
-+ UpToMaxAge,
-+ ospfVirtIfHelloInterval
-+ HelloRange,
-+ ospfVirtIfRtrDeadInterval
-+ PositiveInteger,
-+ ospfVirtIfState
-+ INTEGER,
-+ ospfVirtIfEvents
-+ Counter32,
-+ ospfVirtIfAuthType
-+ INTEGER,
-+ ospfVirtIfAuthKey
-+ OCTET STRING,
-+ ospfVirtIfStatus
-+ RowStatus
-+ }
-+
-+ ospfVirtIfAreaId OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Transit Area that the Virtual Link
-+ traverses. By definition, this is not 0.0.0.0"
-+ ::= { ospfVirtIfEntry 1 }
-+
-+
-+ ospfVirtIfNeighbor OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Router ID of the Virtual Neighbor."
-+ ::= { ospfVirtIfEntry 2 }
-+
-+
-+ ospfVirtIfTransitDelay OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The estimated number of seconds it takes to
-+ transmit a link- state update packet over this
-+ interface."
-+ DEFVAL { 1 }
-+ ::= { ospfVirtIfEntry 3 }
-+
-+
-+ ospfVirtIfRetransInterval OBJECT-TYPE
-+ SYNTAX UpToMaxAge
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds between link-state ad-
-+ vertisement retransmissions, for adjacencies
-+ belonging to this interface. This value is
-+ also used when retransmitting database descrip-
-+ tion and link-state request packets. This
-+ value should be well over the expected round-
-+ trip time."
-+ DEFVAL { 5 }
-+ ::= { ospfVirtIfEntry 4 }
-+
-+
-+ ospfVirtIfHelloInterval OBJECT-TYPE
-+ SYNTAX HelloRange
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The length of time, in seconds, between the
-+ Hello packets that the router sends on the in-
-+ terface. This value must be the same for the
-+ virtual neighbor."
-+ DEFVAL { 10 }
-+ ::= { ospfVirtIfEntry 5 }
-+
-+
-+ ospfVirtIfRtrDeadInterval OBJECT-TYPE
-+ SYNTAX PositiveInteger
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The number of seconds that a router's Hello
-+ packets have not been seen before it's neigh-
-+ bors declare the router down. This should be
-+ some multiple of the Hello interval. This
-+ value must be the same for the virtual neigh-
-+ bor."
-+ DEFVAL { 60 }
-+ ::= { ospfVirtIfEntry 6 }
-+
-+
-+ ospfVirtIfState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1), -- these use the same encoding
-+ pointToPoint (4) -- as the ospfIfTable
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "OSPF virtual interface states."
-+ DEFVAL { down }
-+ ::= { ospfVirtIfEntry 7 }
-+
-+
-+ ospfVirtIfEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of state changes or error events on
-+ this Virtual Link"
-+ ::= { ospfVirtIfEntry 8 }
-+
-+
-+ ospfVirtIfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..256))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "If Authentication Type is simplePassword, the
-+ device will left adjust and zero fill to 8 oc-
-+ tets.
-+
-+ Note that unauthenticated interfaces need no
-+ authentication key, and simple password authen-
-+ tication cannot use a key of more than 8 oc-
-+ tets. Larger keys are useful only with authen-
-+ tication mechanisms not specified in this docu-
-+ ment.
-+
-+ When read, ospfVifAuthKey always returns a
-+ string of length zero."
-+ REFERENCE
-+ "OSPF Version 2, Section 9 The Interface Data
-+ Structure"
-+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
-+ ::= { ospfVirtIfEntry 9 }
-+
-+
-+ ospfVirtIfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfVirtIfEntry 10 }
-+
-+
-+ ospfVirtIfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER (0..255)
-+ -- none (0),
-+ -- simplePassword (1)
-+ -- md5 (2)
-+ -- reserved for specification by IANA (> 2)
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The authentication type specified for a virtu-
-+ al interface. Additional authentication types
-+ may be assigned locally."
-+ REFERENCE
-+ "OSPF Version 2, Appendix E Authentication"
-+ DEFVAL { 0 } -- no authentication, by default
-+ ::= { ospfVirtIfEntry 11 }
-+
-+
-+-- OSPF Neighbor Table
-+
-+-- The OSPF Neighbor Table describes all neighbors in
-+-- the locality of the subject router.
-+
-+ ospfNbrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A table of non-virtual neighbor information."
-+ REFERENCE
-+ "OSPF Version 2, Section 10 The Neighbor Data
-+ Structure"
-+ ::= { ospf 10 }
-+
-+
-+ ospfNbrEntry OBJECT-TYPE
-+ SYNTAX OspfNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The information regarding a single neighbor."
-+ REFERENCE
-+ "OSPF Version 2, Section 10 The Neighbor Data
-+ Structure"
-+ INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex }
-+ ::= { ospfNbrTable 1 }
-+
-+OspfNbrEntry ::=
-+ SEQUENCE {
-+ ospfNbrIpAddr
-+ IpAddress,
-+ ospfNbrAddressLessIndex
-+ InterfaceIndex,
-+ ospfNbrRtrId
-+ RouterID,
-+ ospfNbrOptions
-+ Integer32,
-+ ospfNbrPriority
-+ DesignatedRouterPriority,
-+ ospfNbrState
-+ INTEGER,
-+ ospfNbrEvents
-+ Counter32,
-+ ospfNbrLsRetransQLen
-+ Gauge32,
-+ ospfNbmaNbrStatus
-+ RowStatus,
-+ ospfNbmaNbrPermanence
-+ INTEGER,
-+ ospfNbrHelloSuppressed
-+ TruthValue
-+ }
-+
-+ ospfNbrIpAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address this neighbor is using in its
-+ IP Source Address. Note that, on addressless
-+ links, this will not be 0.0.0.0, but the ad-
-+ dress of another of the neighbor's interfaces."
-+ ::= { ospfNbrEntry 1 }
-+
-+
-+ ospfNbrAddressLessIndex OBJECT-TYPE
-+ SYNTAX InterfaceIndex
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "On an interface having an IP Address, zero.
-+ On addressless interfaces, the corresponding
-+ value of ifIndex in the Internet Standard MIB.
-+ On row creation, this can be derived from the
-+ instance."
-+ ::= { ospfNbrEntry 2 }
-+
-+
-+ ospfNbrRtrId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer (represented as a type IpAd-
-+ dress) uniquely identifying the neighboring
-+ router in the Autonomous System."
-+ DEFVAL { '00000000'H } -- 0.0.0.0
-+ ::= { ospfNbrEntry 3 }
-+
-+
-+ ospfNbrOptions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask corresponding to the neighbor's op-
-+ tions field.
-+
-+ Bit 0, if set, indicates that the system will
-+ operate on Type of Service metrics other than
-+ TOS 0. If zero, the neighbor will ignore all
-+ metrics except the TOS 0 metric.
-+
-+ Bit 1, if set, indicates that the associated
-+ area accepts and operates on external informa-
-+ tion; if zero, it is a stub area.
-+
-+ Bit 2, if set, indicates that the system is ca-
-+ pable of routing IP Multicast datagrams; i.e.,
-+ that it implements the Multicast Extensions to
-+ OSPF.
-+
-+ Bit 3, if set, indicates that the associated
-+ area is an NSSA. These areas are capable of
-+ carrying type 7 external advertisements, which
-+ are translated into type 5 external advertise-
-+ ments at NSSA borders."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.2 Options"
-+ DEFVAL { 0 }
-+ ::= { ospfNbrEntry 4 }
-+
-+
-+ ospfNbrPriority OBJECT-TYPE
-+ SYNTAX DesignatedRouterPriority
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The priority of this neighbor in the designat-
-+ ed router election algorithm. The value 0 sig-
-+ nifies that the neighbor is not eligible to be-
-+ come the designated router on this particular
-+ network."
-+ DEFVAL { 1 }
-+ ::= { ospfNbrEntry 5 }
-+
-+
-+ ospfNbrState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ attempt (2),
-+ init (3),
-+ twoWay (4),
-+ exchangeStart (5),
-+ exchange (6),
-+ loading (7),
-+ full (8)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The State of the relationship with this Neigh-
-+ bor."
-+ REFERENCE
-+ "OSPF Version 2, Section 10.1 Neighbor States"
-+ DEFVAL { down }
-+ ::= { ospfNbrEntry 6 }
-+
-+
-+ ospfNbrEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this neighbor relationship
-+ has changed state, or an error has occurred."
-+ ::= { ospfNbrEntry 7 }
-+
-+
-+ ospfNbrLsRetransQLen OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current length of the retransmission
-+ queue."
-+ ::= { ospfNbrEntry 8 }
-+
-+
-+ ospfNbmaNbrStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfNbrEntry 9 }
-+
-+
-+ ospfNbmaNbrPermanence OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ dynamic (1), -- learned through protocol
-+ permanent (2) -- configured address
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. 'dynamic' and 'permanent' refer to how
-+ the neighbor became known."
-+ DEFVAL { permanent }
-+ ::= { ospfNbrEntry 10 }
-+
-+
-+ ospfNbrHelloSuppressed OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Hellos are being suppressed
-+ to the neighbor"
-+ ::= { ospfNbrEntry 11 }
-+
-+
-+-- OSPF Virtual Neighbor Table
-+
-+-- This table describes all virtual neighbors.
-+-- Since Virtual Links are configured in the
-+-- virtual interface table, this table is read-only.
-+
-+ ospfVirtNbrTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfVirtNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A table of virtual neighbor information."
-+ REFERENCE
-+ "OSPF Version 2, Section 15 Virtual Links"
-+ ::= { ospf 11 }
-+
-+
-+ ospfVirtNbrEntry OBJECT-TYPE
-+ SYNTAX OspfVirtNbrEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Virtual neighbor information."
-+ INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId }
-+ ::= { ospfVirtNbrTable 1 }
-+
-+OspfVirtNbrEntry ::=
-+ SEQUENCE {
-+ ospfVirtNbrArea
-+ AreaID,
-+ ospfVirtNbrRtrId
-+ RouterID,
-+ ospfVirtNbrIpAddr
-+ IpAddress,
-+ ospfVirtNbrOptions
-+ Integer32,
-+ ospfVirtNbrState
-+ INTEGER,
-+ ospfVirtNbrEvents
-+ Counter32,
-+ ospfVirtNbrLsRetransQLen
-+ Gauge32,
-+ ospfVirtNbrHelloSuppressed
-+ TruthValue
-+ }
-+
-+ ospfVirtNbrArea OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Transit Area Identifier."
-+ ::= { ospfVirtNbrEntry 1 }
-+
-+
-+ ospfVirtNbrRtrId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A 32-bit integer uniquely identifying the
-+ neighboring router in the Autonomous System."
-+ ::= { ospfVirtNbrEntry 2 }
-+
-+
-+ ospfVirtNbrIpAddr OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address this Virtual Neighbor is us-
-+ ing."
-+ ::= { ospfVirtNbrEntry 3 }
-+
-+
-+ ospfVirtNbrOptions OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "A Bit Mask corresponding to the neighbor's op-
-+ tions field.
-+
-+ Bit 1, if set, indicates that the system will
-+ operate on Type of Service metrics other than
-+ TOS 0. If zero, the neighbor will ignore all
-+ metrics except the TOS 0 metric.
-+
-+ Bit 2, if set, indicates that the system is
-+ Network Multicast capable; ie, that it imple-
-+ ments OSPF Multicast Routing."
-+ ::= { ospfVirtNbrEntry 4 }
-+ ospfVirtNbrState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ down (1),
-+ attempt (2),
-+ init (3),
-+ twoWay (4),
-+ exchangeStart (5),
-+ exchange (6),
-+ loading (7),
-+ full (8)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The state of the Virtual Neighbor Relation-
-+ ship."
-+ ::= { ospfVirtNbrEntry 5 }
-+
-+
-+ ospfVirtNbrEvents OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of times this virtual link has
-+ changed its state, or an error has occurred."
-+ ::= { ospfVirtNbrEntry 6 }
-+
-+
-+ ospfVirtNbrLsRetransQLen OBJECT-TYPE
-+ SYNTAX Gauge32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The current length of the retransmission
-+ queue."
-+ ::= { ospfVirtNbrEntry 7 }
-+
-+
-+ ospfVirtNbrHelloSuppressed OBJECT-TYPE
-+ SYNTAX TruthValue
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Indicates whether Hellos are being suppressed
-+ to the neighbor"
-+ ::= { ospfVirtNbrEntry 8 }
-+
-+-- OSPF Link State Database, External
-+
-+-- The Link State Database contains the Link State
-+-- Advertisements from throughout the areas that the
-+-- device is attached to.
-+
-+-- This table is identical to the OSPF LSDB Table in
-+-- format, but contains only External Link State
-+-- Advertisements. The purpose is to allow external
-+-- LSAs to be displayed once for the router rather
-+-- than once in each non-stub area.
-+
-+ ospfExtLsdbTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfExtLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "The OSPF Process's Links State Database."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospf 12 }
-+
-+
-+ ospfExtLsdbEntry OBJECT-TYPE
-+ SYNTAX OspfExtLsdbEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A single Link State Advertisement."
-+ INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId }
-+ ::= { ospfExtLsdbTable 1 }
-+
-+OspfExtLsdbEntry ::=
-+ SEQUENCE {
-+ ospfExtLsdbType
-+ INTEGER,
-+ ospfExtLsdbLsid
-+ IpAddress,
-+ ospfExtLsdbRouterId
-+ RouterID,
-+ ospfExtLsdbSequence
-+ Integer32,
-+ ospfExtLsdbAge
-+ Integer32,
-+ ospfExtLsdbChecksum
-+ Integer32,
-+ ospfExtLsdbAdvertisement
-+ OCTET STRING
-+ }
-+
-+ ospfExtLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ asExternalLink (5)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the link state advertisement.
-+ Each link state type has a separate advertise-
-+ ment format."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfExtLsdbEntry 1 }
-+
-+
-+ ospfExtLsdbLsid OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Link State ID is an LS Type Specific field
-+ containing either a Router ID or an IP Address;
-+ it identifies the piece of the routing domain
-+ that is being described by the advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.4 Link State ID"
-+ ::= { ospfExtLsdbEntry 2 }
-+
-+
-+ ospfExtLsdbRouterId OBJECT-TYPE
-+ SYNTAX RouterID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The 32 bit number that uniquely identifies the
-+ originating router in the Autonomous System."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.1 Global parameters"
-+ ::= { ospfExtLsdbEntry 3 }
-+
-+-- Note that the OSPF Sequence Number is a 32 bit signed
-+-- integer. It starts with the value '80000001'h,
-+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-+-- Thus, a typical sequence number will be very negative.
-+ ospfExtLsdbSequence OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The sequence number field is a signed 32-bit
-+ integer. It is used to detect old and dupli-
-+ cate link state advertisements. The space of
-+ sequence numbers is linearly ordered. The
-+ larger the sequence number the more recent the
-+ advertisement."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.6 LS sequence
-+ number"
-+ ::= { ospfExtLsdbEntry 4 }
-+
-+
-+ ospfExtLsdbAge OBJECT-TYPE
-+ SYNTAX Integer32 -- Should be 0..MaxAge
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the age of the link state adver-
-+ tisement in seconds."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.1 LS age"
-+ ::= { ospfExtLsdbEntry 5 }
-+
-+
-+ ospfExtLsdbChecksum OBJECT-TYPE
-+ SYNTAX Integer32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "This field is the checksum of the complete
-+ contents of the advertisement, excepting the
-+ age field. The age field is excepted so that
-+ an advertisement's age can be incremented
-+ without updating the checksum. The checksum
-+ used is the same that is used for ISO connec-
-+ tionless datagrams; it is commonly referred to
-+ as the Fletcher checksum."
-+ REFERENCE
-+ "OSPF Version 2, Section 12.1.7 LS checksum"
-+ ::= { ospfExtLsdbEntry 6 }
-+
-+
-+ ospfExtLsdbAdvertisement OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(36))
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The entire Link State Advertisement, including
-+ its header."
-+ REFERENCE
-+ "OSPF Version 2, Section 12 Link State Adver-
-+ tisements"
-+ ::= { ospfExtLsdbEntry 7 }
-+
-+
-+-- OSPF Use of the CIDR Route Table
-+
-+ospfRouteGroup OBJECT IDENTIFIER ::= { ospf 13 }
-+
-+-- The IP Forwarding Table defines a number of objects for use by
-+-- the routing protocol to externalize its information. Most of
-+-- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy,
-+-- ipForwardNextHop, ipForwardIfIndex, ipForwardType,
-+-- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are
-+-- defined there.
-+
-+-- Those that leave some discretion are defined here.
-+
-+-- ipCidrRouteProto is, of course, ospf (13).
-+
-+-- ipCidrRouteAge is the time since the route was first calculated,
-+-- as opposed to the time since the last SPF run.
-+
-+-- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing
-+-- protocol. The following values shall be found there depending
-+-- on the way the route was calculated.
-+
-+ospfIntraArea OBJECT IDENTIFIER ::= { ospfRouteGroup 1 }
-+ospfInterArea OBJECT IDENTIFIER ::= { ospfRouteGroup 2 }
-+ospfExternalType1 OBJECT IDENTIFIER ::= { ospfRouteGroup 3 }
-+ospfExternalType2 OBJECT IDENTIFIER ::= { ospfRouteGroup 4 }
-+
-+-- ipCidrRouteMetric1 is, by definition, the primary routing
-+-- metric. Therefore, it should be the metric that route
-+-- selection is based on. For intra-area and inter-area routes,
-+-- it is an OSPF metric. For External Type 1 (comparable value)
-+-- routes, it is an OSPF metric plus the External Metric. For
-+-- external Type 2 (non-comparable value) routes, it is the
-+-- external metric.
-+
-+-- ipCidrRouteMetric2 is, by definition, a secondary routing
-+-- metric. Therefore, it should be the metric that breaks a tie
-+-- among routes having equal metric1 values and the same
-+-- calculation rule. For intra-area, inter-area routes, and
-+-- External Type 1 (comparable value) routes, it is unused. For
-+-- external Type 2 (non-comparable value) routes, it is the metric
-+-- to the AS border router.
-+
-+-- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are
-+-- unused.
-+
-+--
-+-- The OSPF Area Aggregate Table
-+--
-+-- This table replaces the OSPF Area Summary Table, being an
-+-- extension of that for CIDR routers.
-+
-+ ospfAreaAggregateTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF OspfAreaAggregateEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A range of IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255. Note that if
-+ ranges are configured such that one range sub-
-+ sumes another range (e.g., 10.0.0.0 mask
-+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
-+ most specific match is the preferred one."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospf 14 }
-+
-+
-+ ospfAreaAggregateEntry OBJECT-TYPE
-+ SYNTAX OspfAreaAggregateEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A range of IP addresses specified by an IP
-+ address/IP network mask pair. For example,
-+ class B address range of X.X.X.X with a network
-+ mask of 255.255.0.0 includes all IP addresses
-+ from X.X.0.0 to X.X.255.255. Note that if
-+ ranges are range configured such that one range
-+ subsumes another range (e.g., 10.0.0.0 mask
-+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
-+ most specific match is the preferred one."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
-+ ospfAreaAggregateNet, ospfAreaAggregateMask }
-+ ::= { ospfAreaAggregateTable 1 }
-+
-+
-+OspfAreaAggregateEntry ::=
-+ SEQUENCE {
-+ ospfAreaAggregateAreaID
-+ AreaID,
-+ ospfAreaAggregateLsdbType
-+ INTEGER,
-+ ospfAreaAggregateNet
-+ IpAddress,
-+ ospfAreaAggregateMask
-+ IpAddress,
-+ ospfAreaAggregateStatus
-+ RowStatus,
-+ ospfAreaAggregateEffect
-+ INTEGER
-+ }
-+
-+ ospfAreaAggregateAreaID OBJECT-TYPE
-+ SYNTAX AreaID
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Area the Address Aggregate is to be found
-+ within."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 1 }
-+
-+
-+ ospfAreaAggregateLsdbType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ summaryLink (3),
-+ nssaExternalLink (7)
-+ }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The type of the Address Aggregate. This field
-+ specifies the Lsdb type that this Address Ag-
-+ gregate applies to."
-+ REFERENCE
-+ "OSPF Version 2, Appendix A.4.1 The Link State
-+ Advertisement header"
-+ ::= { ospfAreaAggregateEntry 2 }
-+
-+
-+ ospfAreaAggregateNet OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of the Net or Subnet indicated
-+ by the range."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 3 }
-+
-+
-+ ospfAreaAggregateMask OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The Subnet Mask that pertains to the Net or
-+ Subnet."
-+ REFERENCE
-+ "OSPF Version 2, Appendix C.2 Area parameters"
-+ ::= { ospfAreaAggregateEntry 4 }
-+
-+
-+ ospfAreaAggregateStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable displays the status of the en-
-+ try. Setting it to 'invalid' has the effect of
-+ rendering it inoperative. The internal effect
-+ (row removal) is implementation dependent."
-+ ::= { ospfAreaAggregateEntry 5 }
-+
-+
-+ ospfAreaAggregateEffect OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ advertiseMatching (1),
-+ doNotAdvertiseMatching (2)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Subnets subsumed by ranges either trigger the
-+ advertisement of the indicated aggregate (ad-
-+ vertiseMatching), or result in the subnet's not
-+ being advertised at all outside the area."
-+ DEFVAL { advertiseMatching }
-+ ::= { ospfAreaAggregateEntry 6 }
-+
-+
-+-- conformance information
-+
-+ospfConformance OBJECT IDENTIFIER ::= { ospf 15 }
-+
-+ospfGroups OBJECT IDENTIFIER ::= { ospfConformance 1 }
-+ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 }
-+
-+-- compliance statements
-+
-+ ospfCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS {
-+ ospfBasicGroup,
-+ ospfAreaGroup,
-+ ospfStubAreaGroup,
-+ ospfIfGroup,
-+ ospfIfMetricGroup,
-+ ospfVirtIfGroup,
-+ ospfNbrGroup,
-+ ospfVirtNbrGroup,
-+ ospfAreaAggregateGroup
-+ }
-+ ::= { ospfCompliances 1 }
-+
-+
-+-- units of conformance
-+
-+ ospfBasicGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfRouterId,
-+ ospfAdminStat,
-+ ospfVersionNumber,
-+ ospfAreaBdrRtrStatus,
-+ ospfASBdrRtrStatus,
-+ ospfExternLsaCount,
-+ ospfExternLsaCksumSum,
-+ ospfTOSSupport,
-+ ospfOriginateNewLsas,
-+ ospfRxNewLsas,
-+ ospfExtLsdbLimit,
-+ ospfMulticastExtensions,
-+ ospfExitOverflowInterval,
-+ ospfDemandExtensions
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 1 }
-+
-+
-+ ospfAreaGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaId,
-+ ospfImportAsExtern,
-+ ospfSpfRuns,
-+ ospfAreaBdrRtrCount,
-+ ospfAsBdrRtrCount,
-+ ospfAreaLsaCount,
-+ ospfAreaLsaCksumSum,
-+ ospfAreaSummary,
-+ ospfAreaStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ supporting areas."
-+ ::= { ospfGroups 2 }
-+
-+
-+ ospfStubAreaGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfStubAreaId,
-+ ospfStubTOS,
-+ ospfStubMetric,
-+ ospfStubStatus,
-+ ospfStubMetricType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ supporting stub areas."
-+ ::= { ospfGroups 3 }
-+
-+
-+ ospfLsdbGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfLsdbAreaId,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId,
-+ ospfLsdbSequence,
-+ ospfLsdbAge,
-+ ospfLsdbChecksum,
-+ ospfLsdbAdvertisement
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that display their link state database."
-+ ::= { ospfGroups 4 }
-+
-+
-+ ospfAreaRangeGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaRangeAreaId,
-+ ospfAreaRangeNet,
-+ ospfAreaRangeMask,
-+ ospfAreaRangeStatus,
-+ ospfAreaRangeEffect
-+ }
-+ STATUS obsolete
-+ DESCRIPTION
-+ "These objects are required for non-CIDR OSPF
-+ systems that support multiple areas."
-+ ::= { ospfGroups 5 }
-+
-+
-+ ospfHostGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfHostIpAddress,
-+ ospfHostTOS,
-+ ospfHostMetric,
-+ ospfHostStatus,
-+ ospfHostAreaID
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that support attached hosts."
-+ ::= { ospfGroups 6 }
-+
-+
-+ ospfIfGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfIfAreaId,
-+ ospfIfType,
-+ ospfIfAdminStat,
-+ ospfIfRtrPriority,
-+ ospfIfTransitDelay,
-+ ospfIfRetransInterval,
-+ ospfIfHelloInterval,
-+ ospfIfRtrDeadInterval,
-+ ospfIfPollInterval,
-+ ospfIfState,
-+ ospfIfDesignatedRouter,
-+ ospfIfBackupDesignatedRouter,
-+ ospfIfEvents,
-+ ospfIfAuthType,
-+ ospfIfAuthKey,
-+ ospfIfStatus,
-+ ospfIfMulticastForwarding,
-+ ospfIfDemand
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 7 }
-+
-+
-+ ospfIfMetricGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfIfMetricIpAddress,
-+ ospfIfMetricAddressLessIf,
-+ ospfIfMetricTOS,
-+ ospfIfMetricValue,
-+ ospfIfMetricStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 8 }
-+
-+
-+ ospfVirtIfGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfVirtIfTransitDelay,
-+ ospfVirtIfRetransInterval,
-+ ospfVirtIfHelloInterval,
-+ ospfVirtIfRtrDeadInterval,
-+ ospfVirtIfState,
-+ ospfVirtIfEvents,
-+ ospfVirtIfAuthType,
-+ ospfVirtIfAuthKey,
-+ ospfVirtIfStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 9 }
-+
-+
-+ ospfNbrGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfNbrIpAddr,
-+ ospfNbrAddressLessIndex,
-+ ospfNbrRtrId,
-+ ospfNbrOptions,
-+ ospfNbrPriority,
-+ ospfNbrState,
-+ ospfNbrEvents,
-+ ospfNbrLsRetransQLen,
-+ ospfNbmaNbrStatus,
-+ ospfNbmaNbrPermanence,
-+ ospfNbrHelloSuppressed
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 10 }
-+
-+
-+ ospfVirtNbrGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfVirtNbrArea,
-+ ospfVirtNbrRtrId,
-+ ospfVirtNbrIpAddr,
-+ ospfVirtNbrOptions,
-+ ospfVirtNbrState,
-+ ospfVirtNbrEvents,
-+ ospfVirtNbrLsRetransQLen,
-+ ospfVirtNbrHelloSuppressed
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 11 }
-+
-+
-+ ospfExtLsdbGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfExtLsdbType,
-+ ospfExtLsdbLsid,
-+ ospfExtLsdbRouterId,
-+ ospfExtLsdbSequence,
-+ ospfExtLsdbAge,
-+ ospfExtLsdbChecksum,
-+ ospfExtLsdbAdvertisement
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems
-+ that display their link state database."
-+ ::= { ospfGroups 12 }
-+
-+
-+ ospfAreaAggregateGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfAreaAggregateAreaID,
-+ ospfAreaAggregateLsdbType,
-+ ospfAreaAggregateNet,
-+ ospfAreaAggregateMask,
-+ ospfAreaAggregateStatus,
-+ ospfAreaAggregateEffect
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required for OSPF systems."
-+ ::= { ospfGroups 13 }
-+
-+END
---- /dev/null
-+++ b/mibs/OSPF-TRAP-MIB.txt
-@@ -0,0 +1,443 @@
-+OSPF-TRAP-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
-+ FROM SNMPv2-SMI
-+ MODULE-COMPLIANCE, OBJECT-GROUP
-+ FROM SNMPv2-CONF
-+ ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
-+ ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
-+ ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
-+ ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState,
-+ ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId,
-+ ospfExtLsdbLimit, ospf
-+ FROM OSPF-MIB;
-+
-+ ospfTrap MODULE-IDENTITY
-+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
-+ ORGANIZATION "IETF OSPF Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fred@cisco.com
-+
-+ Rob Coltun
-+ Postal: RainbowBridge Communications
-+ Tel: (301) 340-9416
-+ E-Mail: rcoltun@rainbow-bridge.com"
-+ DESCRIPTION
-+ "The MIB module to describe traps for the OSPF
-+ Version 2 Protocol."
-+ ::= { ospf 16 }
-+
-+-- Trap Support Objects
-+
-+-- The following are support objects for the OSPF traps.
-+
-+ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
-+ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }
-+
-+ ospfSetTrap OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(4))
-+ MAX-ACCESS read-write
-+ STATUS current
-+ DESCRIPTION
-+ "A four-octet string serving as a bit map for
-+ the trap events defined by the OSPF traps. This
-+ object is used to enable and disable specific
-+ OSPF traps where a 1 in the bit field
-+ represents enabled. The right-most bit (least
-+ significant) represents trap 0."
-+ ::= { ospfTrapControl 1 }
-+
-+
-+ ospfConfigErrorType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ badVersion (1),
-+ areaMismatch (2),
-+ unknownNbmaNbr (3), -- Router is Dr eligible
-+ unknownVirtualNbr (4),
-+ authTypeMismatch(5),
-+ authFailure (6),
-+ netMaskMismatch (7),
-+ helloIntervalMismatch (8),
-+ deadIntervalMismatch (9),
-+ optionMismatch (10) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "Potential types of configuration conflicts.
-+ Used by the ospfConfigError and ospfConfigVir-
-+ tError traps."
-+ ::= { ospfTrapControl 2 }
-+
-+
-+ ospfPacketType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ hello (1),
-+ dbDescript (2),
-+ lsReq (3),
-+ lsUpdate (4),
-+ lsAck (5) }
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "OSPF packet types."
-+ ::= { ospfTrapControl 3 }
-+
-+
-+ ospfPacketSrc OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP address of an inbound packet that can-
-+ not be identified by a neighbor instance."
-+ ::= { ospfTrapControl 4 }
-+
-+
-+-- Traps
-+
-+
-+ ospfIfStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfIfState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of a non-virtual
-+ OSPF interface. This trap should be generated
-+ when the interface state regresses (e.g., goes
-+ from Dr to Down) or progresses to a terminal
-+ state (i.e., Point-to-Point, DR Other, Dr, or
-+ Backup)."
-+ ::= { ospfTraps 16 }
-+
-+
-+ ospfVirtIfStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfVirtIfState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of an OSPF vir-
-+ tual interface.
-+ This trap should be generated when the inter-
-+ face state regresses (e.g., goes from Point-
-+ to-Point to Down) or progresses to a terminal
-+ state (i.e., Point-to-Point)."
-+ ::= { ospfTraps 1 }
-+
-+
-+ ospfNbrStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfNbrIpAddr,
-+ ospfNbrAddressLessIndex,
-+ ospfNbrRtrId,
-+ ospfNbrState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfNbrStateChange trap signifies that
-+ there has been a change in the state of a non-
-+ virtual OSPF neighbor. This trap should be
-+ generated when the neighbor state regresses
-+ (e.g., goes from Attempt or Full to 1-Way or
-+ Down) or progresses to a terminal state (e.g.,
-+ 2-Way or Full). When an neighbor transitions
-+ from or to Full on non-broadcast multi-access
-+ and broadcast networks, the trap should be gen-
-+ erated by the designated router. A designated
-+ router transitioning to Down will be noted by
-+ ospfIfStateChange."
-+ ::= { ospfTraps 2 }
-+
-+
-+ ospfVirtNbrStateChange NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtNbrArea,
-+ ospfVirtNbrRtrId,
-+ ospfVirtNbrState -- The new state
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfStateChange trap signifies that there
-+ has been a change in the state of an OSPF vir-
-+ tual neighbor. This trap should be generated
-+ when the neighbor state regresses (e.g., goes
-+ from Attempt or Full to 1-Way or Down) or
-+ progresses to a terminal state (e.g., Full)."
-+ ::= { ospfTraps 3 }
-+ ospfIfConfigError NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfConfigErrorType, -- Type of error
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfConfigError trap signifies that a
-+ packet has been received on a non-virtual in-
-+ terface from a router whose configuration
-+ parameters conflict with this router's confi-
-+ guration parameters. Note that the event op-
-+ tionMismatch should cause a trap only if it
-+ prevents an adjacency from forming."
-+ ::= { ospfTraps 4 }
-+
-+
-+ ospfVirtIfConfigError NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfConfigErrorType, -- Type of error
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfConfigError trap signifies that a pack-
-+ et has been received on a virtual interface
-+ from a router whose configuration parameters
-+ conflict with this router's configuration
-+ parameters. Note that the event optionMismatch
-+ should cause a trap only if it prevents an ad-
-+ jacency from forming."
-+ ::= { ospfTraps 5 }
-+
-+
-+ ospfIfAuthFailure NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfConfigErrorType, -- authTypeMismatch or
-+ -- authFailure
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfAuthFailure trap signifies that a
-+ packet has been received on a non-virtual in-
-+ terface from a router whose authentication key
-+ or authentication type conflicts with this
-+ router's authentication key or authentication
-+ type."
-+ ::= { ospfTraps 6 }
-+
-+
-+ ospfVirtIfAuthFailure NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfConfigErrorType, -- authTypeMismatch or
-+ -- authFailure
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfVirtIfAuthFailure trap signifies that a
-+ packet has been received on a virtual interface
-+ from a router whose authentication key or au-
-+ thentication type conflicts with this router's
-+ authentication key or authentication type."
-+ ::= { ospfTraps 7 }
-+
-+
-+ ospfIfRxBadPacket NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfPacketSrc, -- The source IP address
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfIfRxBadPacket trap signifies that an
-+ OSPF packet has been received on a non-virtual
-+ interface that cannot be parsed."
-+ ::= { ospfTraps 8 }
-+
-+ ospfVirtIfRxBadPacket NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfPacketType
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfRxBadPacket trap signifies that an OSPF
-+ packet has been received on a virtual interface
-+ that cannot be parsed."
-+ ::= { ospfTraps 9 }
-+
-+
-+ ospfTxRetransmit NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfIfIpAddress,
-+ ospfAddressLessIf,
-+ ospfNbrRtrId, -- Destination
-+ ospfPacketType,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfTxRetransmit trap signifies than an
-+ OSPF packet has been retransmitted on a non-
-+ virtual interface. All packets that may be re-
-+ transmitted are associated with an LSDB entry.
-+ The LS type, LS ID, and Router ID are used to
-+ identify the LSDB entry."
-+ ::= { ospfTraps 10 }
-+
-+
-+ ospfVirtIfTxRetransmit NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfVirtIfAreaId,
-+ ospfVirtIfNeighbor,
-+ ospfPacketType,
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfTxRetransmit trap signifies than an
-+ OSPF packet has been retransmitted on a virtual
-+ interface. All packets that may be retransmit-
-+ ted are associated with an LSDB entry. The LS
-+ type, LS ID, and Router ID are used to identify
-+ the LSDB entry."
-+ ::= { ospfTraps 11 }
-+
-+
-+ ospfOriginateLsa NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfOriginateLsa trap signifies that a new
-+ LSA has been originated by this router. This
-+ trap should not be invoked for simple refreshes
-+ of LSAs (which happesn every 30 minutes), but
-+ instead will only be invoked when an LSA is
-+ (re)originated due to a topology change. Addi-
-+ tionally, this trap does not include LSAs that
-+ are being flushed because they have reached
-+ MaxAge."
-+ ::= { ospfTraps 12 }
-+
-+
-+ ospfMaxAgeLsa NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
-+ ospfLsdbType,
-+ ospfLsdbLsid,
-+ ospfLsdbRouterId
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfMaxAgeLsa trap signifies that one of
-+ the LSA in the router's link-state database has
-+ aged to MaxAge."
-+ ::= { ospfTraps 13 }
-+
-+
-+ ospfLsdbOverflow NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfExtLsdbLimit
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfLsdbOverflow trap signifies that the
-+ number of LSAs in the router's link-state data-
-+ base has exceeded ospfExtLsdbLimit."
-+ ::= { ospfTraps 14 }
-+
-+
-+ ospfLsdbApproachingOverflow NOTIFICATION-TYPE
-+ OBJECTS {
-+ ospfRouterId, -- The originator of the trap
-+ ospfExtLsdbLimit
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "An ospfLsdbApproachingOverflow trap signifies
-+ that the number of LSAs in the router's link-
-+ state database has exceeded ninety percent of
-+ ospfExtLsdbLimit."
-+ ::= { ospfTraps 15 }
-+
-+
-+-- conformance information
-+
-+ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }
-+
-+ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
-+ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }
-+
-+-- compliance statements
-+
-+ ospfTrapCompliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS { ospfTrapControlGroup }
-+
-+
-+ GROUP ospfTrapControlGroup
-+ DESCRIPTION
-+ "This group is optional but recommended for all
-+ OSPF systems"
-+ ::= { ospfTrapCompliances 1 }
-+
-+
-+-- units of conformance
-+
-+ ospfTrapControlGroup OBJECT-GROUP
-+ OBJECTS {
-+ ospfSetTrap,
-+ ospfConfigErrorType,
-+ ospfPacketType,
-+ ospfPacketSrc
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "These objects are required to control traps
-+ from OSPF systems."
-+ ::= { ospfTrapGroups 1 }
-+
-+
-+END
---- /dev/null
-+++ b/mibs/RIPv2-MIB.txt
-@@ -0,0 +1,530 @@
-+ RIPv2-MIB DEFINITIONS ::= BEGIN
-+
-+ IMPORTS
-+ MODULE-IDENTITY, OBJECT-TYPE, Counter32,
-+ TimeTicks, IpAddress FROM SNMPv2-SMI
-+ TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC
-+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
-+ mib-2 FROM RFC1213-MIB;
-+
-+ -- This MIB module uses the extended OBJECT-TYPE macro as
-+ -- defined in [9].
-+
-+ rip2 MODULE-IDENTITY
-+ LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994
-+ ORGANIZATION "IETF RIP-II Working Group"
-+ CONTACT-INFO
-+ " Fred Baker
-+ Postal: Cisco Systems
-+ 519 Lado Drive
-+ Santa Barbara, California 93111
-+ Tel: +1 805 681 0115
-+ E-Mail: fbaker@cisco.com
-+
-+ Postal: Gary Malkin
-+ Xylogics, Inc.
-+ 53 Third Avenue
-+ Burlington, MA 01803
-+
-+ Phone: (617) 272-8140
-+ EMail: gmalkin@Xylogics.COM"
-+ DESCRIPTION
-+ "The MIB module to describe the RIP2 Version 2 Protocol"
-+ ::= { mib-2 23 }
-+
-+ -- RIP-2 Management Information Base
-+
-+ -- the RouteTag type represents the contents of the
-+ -- Route Domain field in the packet header or route entry.
-+ -- The use of the Route Domain is deprecated.
-+
-+ RouteTag ::= TEXTUAL-CONVENTION
-+ STATUS current
-+ DESCRIPTION
-+ "the RouteTag type represents the contents of the Route Domain
-+ field in the packet header or route entry"
-+ SYNTAX OCTET STRING (SIZE (2))
-+
-+--4.1 Global Counters
-+
-+-- The RIP-2 Globals Group.
-+-- Implementation of this group is mandatory for systems
-+-- which implement RIP-2.
-+
-+-- These counters are intended to facilitate debugging quickly
-+-- changing routes or failing neighbors
-+
-+rip2Globals OBJECT IDENTIFIER ::= { rip2 1 }
-+
-+ rip2GlobalRouteChanges OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of route changes made to the IP Route
-+ Database by RIP. This does not include the refresh
-+ of a route's age."
-+ ::= { rip2Globals 1 }
-+
-+ rip2GlobalQueries OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of responses sent to RIP queries
-+ from other systems."
-+ ::= { rip2Globals 2 }
-+
-+--4.2 RIP Interface Tables
-+
-+-- RIP Interfaces Groups
-+-- Implementation of these Groups is mandatory for systems
-+-- which implement RIP-2.
-+
-+-- The RIP Interface Status Table.
-+
-+ rip2IfStatTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2IfStatEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of subnets which require separate
-+ status monitoring in RIP."
-+ ::= { rip2 2 }
-+
-+ rip2IfStatEntry OBJECT-TYPE
-+ SYNTAX Rip2IfStatEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A Single Routing Domain in a single Subnet."
-+ INDEX { rip2IfStatAddress }
-+ ::= { rip2IfStatTable 1 }
-+
-+ Rip2IfStatEntry ::=
-+ SEQUENCE {
-+ rip2IfStatAddress
-+ IpAddress,
-+ rip2IfStatRcvBadPackets
-+ Counter32,
-+ rip2IfStatRcvBadRoutes
-+ Counter32,
-+ rip2IfStatSentUpdates
-+ Counter32,
-+ rip2IfStatStatus
-+ RowStatus
-+ }
-+
-+ rip2IfStatAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of this system on the indicated
-+ subnet. For unnumbered interfaces, the value 0.0.0.N,
-+ where the least significant 24 bits (N) is the ifIndex
-+ for the IP Interface in network byte order."
-+ ::= { rip2IfStatEntry 1 }
-+
-+ rip2IfStatRcvBadPackets OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of RIP response packets received by
-+ the RIP process which were subsequently discarded
-+ for any reason (e.g. a version 0 packet, or an
-+ unknown command type)."
-+ ::= { rip2IfStatEntry 2 }
-+
-+ rip2IfStatRcvBadRoutes OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of routes, in valid RIP packets,
-+ which were ignored for any reason (e.g. unknown
-+ address family, or invalid metric)."
-+ ::= { rip2IfStatEntry 3 }
-+
-+ rip2IfStatSentUpdates OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of triggered RIP updates actually
-+ sent on this interface. This explicitly does
-+ NOT include full updates sent containing new
-+ information."
-+ ::= { rip2IfStatEntry 4 }
-+
-+ rip2IfStatStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Writing invalid has the effect of deleting
-+ this interface."
-+ ::= { rip2IfStatEntry 5 }
-+
-+-- The RIP Interface Configuration Table.
-+
-+ rip2IfConfTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2IfConfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of subnets which require separate
-+ configuration in RIP."
-+ ::= { rip2 3 }
-+
-+ rip2IfConfEntry OBJECT-TYPE
-+ SYNTAX Rip2IfConfEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A Single Routing Domain in a single Subnet."
-+ INDEX { rip2IfConfAddress }
-+ ::= { rip2IfConfTable 1 }
-+
-+ Rip2IfConfEntry ::=
-+ SEQUENCE {
-+ rip2IfConfAddress
-+ IpAddress,
-+ rip2IfConfDomain
-+ RouteTag,
-+ rip2IfConfAuthType
-+ INTEGER,
-+ rip2IfConfAuthKey
-+ OCTET STRING (SIZE(0..16)),
-+ rip2IfConfSend
-+ INTEGER,
-+ rip2IfConfReceive
-+ INTEGER,
-+ rip2IfConfDefaultMetric
-+ INTEGER,
-+ rip2IfConfStatus
-+ RowStatus,
-+ rip2IfConfSrcAddress
-+ IpAddress
-+ }
-+
-+ rip2IfConfAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address of this system on the indicated
-+ subnet. For unnumbered interfaces, the value 0.0.0.N,
-+ where the least significant 24 bits (N) is the ifIndex
-+ for the IP Interface in network byte order."
-+ ::= { rip2IfConfEntry 1 }
-+
-+ rip2IfConfDomain OBJECT-TYPE
-+ SYNTAX RouteTag
-+ MAX-ACCESS read-create
-+ STATUS obsolete
-+ DESCRIPTION
-+ "Value inserted into the Routing Domain field
-+ of all RIP packets sent on this interface."
-+ DEFVAL { '0000'h }
-+ ::= { rip2IfConfEntry 2 }
-+
-+ rip2IfConfAuthType OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ noAuthentication (1),
-+ simplePassword (2),
-+ md5 (3)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The type of Authentication used on this
-+ interface."
-+ DEFVAL { noAuthentication }
-+ ::= { rip2IfConfEntry 3 }
-+
-+ rip2IfConfAuthKey OBJECT-TYPE
-+ SYNTAX OCTET STRING (SIZE(0..16))
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The value to be used as the Authentication Key
-+ whenever the corresponding instance of
-+ rip2IfConfAuthType has a value other than
-+ noAuthentication. A modification of the corresponding
-+ instance of rip2IfConfAuthType does not modify
-+ the rip2IfConfAuthKey value. If a string shorter
-+ than 16 octets is supplied, it will be left-
-+ justified and padded to 16 octets, on the right,
-+ with nulls (0x00).
-+
-+ Reading this object always results in an OCTET
-+ STRING of length zero; authentication may not
-+ be bypassed by reading the MIB object."
-+ DEFVAL { ''h }
-+ ::= { rip2IfConfEntry 4 }
-+
-+ rip2IfConfSend OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ doNotSend (1),
-+ ripVersion1 (2),
-+ rip1Compatible (3),
-+ ripVersion2 (4),
-+ ripV1Demand (5),
-+ ripV2Demand (6)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "What the router sends on this interface.
-+ ripVersion1 implies sending RIP updates compliant
-+ with RFC 1058. rip1Compatible implies
-+ broadcasting RIP-2 updates using RFC 1058 route
-+ subsumption rules. ripVersion2 implies
-+ multicasting RIP-2 updates. ripV1Demand indicates
-+ the use of Demand RIP on a WAN interface under RIP
-+ Version 1 rules. ripV2Demand indicates the use of
-+ Demand RIP on a WAN interface under Version 2 rules."
-+ DEFVAL { rip1Compatible }
-+ ::= { rip2IfConfEntry 5 }
-+
-+ rip2IfConfReceive OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ rip1 (1),
-+ rip2 (2),
-+ rip1OrRip2 (3),
-+ doNotRecieve (4)
-+ }
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This indicates which version of RIP updates
-+ are to be accepted. Note that rip2 and
-+ rip1OrRip2 implies reception of multicast
-+ packets."
-+ DEFVAL { rip1OrRip2 }
-+ ::= { rip2IfConfEntry 6 }
-+
-+ rip2IfConfDefaultMetric OBJECT-TYPE
-+ SYNTAX INTEGER ( 0..15 )
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "This variable indicates the metric that is to
-+ be used for the default route entry in RIP updates
-+ originated on this interface. A value of zero
-+ indicates that no default route should be
-+ originated; in this case, a default route via
-+ another router may be propagated."
-+ ::= { rip2IfConfEntry 7 }
-+
-+ rip2IfConfStatus OBJECT-TYPE
-+ SYNTAX RowStatus
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "Writing invalid has the effect of deleting
-+ this interface."
-+ ::= { rip2IfConfEntry 8 }
-+
-+ rip2IfConfSrcAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-create
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address this system will use as a source
-+ address on this interface. If it is a numbered
-+ interface, this MUST be the same value as
-+ rip2IfConfAddress. On unnumbered interfaces,
-+ it must be the value of rip2IfConfAddress for
-+ some interface on the system."
-+ ::= { rip2IfConfEntry 9 }
-+
-+--4.3 Peer Table
-+
-+-- Peer Table
-+
-+-- The RIP Peer Group
-+-- Implementation of this Group is Optional
-+
-+-- This group provides information about active peer
-+-- relationships intended to assist in debugging. An
-+-- active peer is a router from which a valid RIP
-+-- updated has been heard in the last 180 seconds.
-+
-+ rip2PeerTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Rip2PeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "A list of RIP Peers."
-+ ::= { rip2 4 }
-+
-+ rip2PeerEntry OBJECT-TYPE
-+ SYNTAX Rip2PeerEntry
-+ MAX-ACCESS not-accessible
-+ STATUS current
-+ DESCRIPTION
-+ "Information regarding a single routing peer."
-+ INDEX { rip2PeerAddress, rip2PeerDomain }
-+ ::= { rip2PeerTable 1 }
-+
-+ Rip2PeerEntry ::=
-+ SEQUENCE {
-+ rip2PeerAddress
-+ IpAddress,
-+ rip2PeerDomain
-+ RouteTag,
-+ rip2PeerLastUpdate
-+ TimeTicks,
-+ rip2PeerVersion
-+ INTEGER,
-+ rip2PeerRcvBadPackets
-+ Counter32,
-+ rip2PeerRcvBadRoutes
-+ Counter32
-+ }
-+
-+ rip2PeerAddress OBJECT-TYPE
-+ SYNTAX IpAddress
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The IP Address that the peer is using as its source
-+ address. Note that on an unnumbered link, this may
-+ not be a member of any subnet on the system."
-+ ::= { rip2PeerEntry 1 }
-+
-+ rip2PeerDomain OBJECT-TYPE
-+ SYNTAX RouteTag
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The value in the Routing Domain field in RIP
-+ packets received from the peer. As domain suuport
-+ is deprecated, this must be zero."
-+ ::= { rip2PeerEntry 2 }
-+
-+ rip2PeerLastUpdate OBJECT-TYPE
-+ SYNTAX TimeTicks
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The value of sysUpTime when the most recent
-+ RIP update was received from this system."
-+ ::= { rip2PeerEntry 3 }
-+
-+ rip2PeerVersion OBJECT-TYPE
-+ SYNTAX INTEGER ( 0..255 )
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The RIP version number in the header of the
-+ last RIP packet received."
-+ ::= { rip2PeerEntry 4 }
-+
-+ rip2PeerRcvBadPackets OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of RIP response packets from this
-+ peer discarded as invalid."
-+ ::= { rip2PeerEntry 5 }
-+
-+
-+ rip2PeerRcvBadRoutes OBJECT-TYPE
-+ SYNTAX Counter32
-+ MAX-ACCESS read-only
-+ STATUS current
-+ DESCRIPTION
-+ "The number of routes from this peer that were
-+ ignored because the entry format was invalid."
-+ ::= { rip2PeerEntry 6 }
-+
-+-- conformance information
-+
-+rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 }
-+
-+rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 }
-+rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 }
-+
-+-- compliance statements
-+rip2Compliance MODULE-COMPLIANCE
-+ STATUS current
-+ DESCRIPTION
-+ "The compliance statement "
-+ MODULE -- this module
-+ MANDATORY-GROUPS {
-+ rip2GlobalGroup,
-+ rip2IfStatGroup,
-+ rip2IfConfGroup,
-+ rip2PeerGroup
-+ }
-+ GROUP rip2GlobalGroup
-+ DESCRIPTION
-+ "This group defines global controls for RIP-II systems."
-+ GROUP rip2IfStatGroup
-+ DESCRIPTION
-+ "This group defines interface statistics for RIP-II systems."
-+ GROUP rip2IfConfGroup
-+ DESCRIPTION
-+ "This group defines interface configuration for RIP-II systems."
-+ GROUP rip2PeerGroup
-+ DESCRIPTION
-+ "This group defines peer information for RIP-II systems."
-+ ::= { rip2Compliances 1 }
-+
-+-- units of conformance
-+
-+rip2GlobalGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2GlobalRouteChanges,
-+ rip2GlobalQueries
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines global controls for RIP-II systems."
-+ ::= { rip2Groups 1 }
-+rip2IfStatGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2IfStatAddress,
-+ rip2IfStatRcvBadPackets,
-+ rip2IfStatRcvBadRoutes,
-+ rip2IfStatSentUpdates,
-+ rip2IfStatStatus
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines interface statistics for RIP-II systems."
-+ ::= { rip2Groups 2 }
-+rip2IfConfGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2IfConfAddress,
-+ rip2IfConfAuthType,
-+ rip2IfConfAuthKey,
-+ rip2IfConfSend,
-+ rip2IfConfReceive,
-+ rip2IfConfDefaultMetric,
-+ rip2IfConfStatus,
-+ rip2IfConfSrcAddress
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines interface configuration for RIP-II systems."
-+ ::= { rip2Groups 3 }
-+rip2PeerGroup OBJECT-GROUP
-+ OBJECTS {
-+ rip2PeerAddress,
-+ rip2PeerDomain,
-+ rip2PeerLastUpdate,
-+ rip2PeerVersion,
-+ rip2PeerRcvBadPackets,
-+ rip2PeerRcvBadRoutes
-+ }
-+ STATUS current
-+ DESCRIPTION
-+ "This group defines peer information for RIP-II systems."
-+ ::= { rip2Groups 4 }
-+END
---- /dev/null
-+++ b/mibs/SOURCE-ROUTING-MIB.txt
-@@ -0,0 +1,452 @@
-+SOURCE-ROUTING-MIB DEFINITIONS ::= BEGIN
-+
-+IMPORTS
-+ Counter, Gauge
-+ FROM RFC1155-SMI
-+ dot1dBridge, dot1dSr
-+ FROM BRIDGE-MIB
-+ OBJECT-TYPE
-+ FROM RFC-1212;
-+
-+-- groups in the SR MIB
-+
-+-- dot1dSr is imported from the Bridge MIB
-+
-+dot1dPortPair OBJECT IDENTIFIER ::= { dot1dBridge 10 }
-+
-+-- the dot1dSr group
-+
-+-- this group is implemented by those bridges that
-+-- support the source route bridging mode, including Source
-+-- Routing and SRT bridges.
-+
-+dot1dSrPortTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dSrPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+ port that is associated with this source route
-+ bridge."
-+ ::= { dot1dSr 1 }
-+
-+dot1dSrPortEntry OBJECT-TYPE
-+ SYNTAX Dot1dSrPortEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port of a source
-+ route bridge."
-+ INDEX { dot1dSrPort }
-+
-+ ::= { dot1dSrPortTable 1 }
-+
-+Dot1dSrPortEntry ::=
-+ SEQUENCE {
-+ dot1dSrPort
-+ INTEGER,
-+ dot1dSrPortHopCount
-+ INTEGER,
-+ dot1dSrPortLocalSegment
-+ INTEGER,
-+ dot1dSrPortBridgeNum
-+ INTEGER,
-+ dot1dSrPortTargetSegment
-+ INTEGER,
-+ dot1dSrPortLargestFrame
-+ INTEGER,
-+ dot1dSrPortSTESpanMode
-+ INTEGER,
-+ dot1dSrPortSpecInFrames
-+ Counter,
-+ dot1dSrPortSpecOutFrames
-+ Counter,
-+ dot1dSrPortApeInFrames
-+ Counter,
-+ dot1dSrPortApeOutFrames
-+ Counter,
-+ dot1dSrPortSteInFrames
-+ Counter,
-+ dot1dSrPortSteOutFrames
-+ Counter,
-+ dot1dSrPortSegmentMismatchDiscards
-+ Counter,
-+ dot1dSrPortDuplicateSegmentDiscards
-+ Counter,
-+ dot1dSrPortHopCountExceededDiscards
-+ Counter,
-+ dot1dSrPortDupLanIdOrTreeErrors
-+ Counter,
-+ dot1dSrPortLanIdMismatches
-+ Counter
-+ }
-+
-+dot1dSrPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the port for which this entry
-+
-+ contains Source Route management information."
-+ ::= { dot1dSrPortEntry 1 }
-+
-+dot1dSrPortHopCount OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum number of routing descriptors allowed
-+ in an All Paths or Spanning Tree Explorer frames."
-+ ::= { dot1dSrPortEntry 2 }
-+
-+dot1dSrPortLocalSegment OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The segment number that uniquely identifies the
-+ segment to which this port is connected. Current
-+ source routing protocols limit this value to the
-+ range: 0 through 4095. (The value 0 is used by
-+ some management applications for special test
-+ cases.) A value of 65535 signifies that no segment
-+ number is assigned to this port."
-+ ::= { dot1dSrPortEntry 3 }
-+
-+dot1dSrPortBridgeNum OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A bridge number uniquely identifies a bridge when
-+ more than one bridge is used to span the same two
-+ segments. Current source routing protocols limit
-+ this value to the range: 0 through 15. A value of
-+ 65535 signifies that no bridge number is assigned
-+ to this bridge."
-+ ::= { dot1dSrPortEntry 4 }
-+
-+dot1dSrPortTargetSegment OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The segment number that corresponds to the target
-+ segment this port is considered to be connected to
-+ by the bridge. Current source routing protocols
-+ limit this value to the range: 0 through 4095.
-+
-+ (The value 0 is used by some management
-+ applications for special test cases.) A value of
-+ 65535 signifies that no target segment is assigned
-+ to this port."
-+ ::= { dot1dSrPortEntry 5 }
-+
-+-- It would be nice if we could use ifMtu as the size of the
-+-- largest frame, but we can't because ifMtu is defined to be
-+-- the size that the (inter-)network layer can use which can
-+-- differ from the MAC layer (especially if several layers of
-+-- encapsulation are used).
-+
-+dot1dSrPortLargestFrame OBJECT-TYPE
-+ SYNTAX INTEGER
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The maximum size of the INFO field (LLC and
-+ above) that this port can send/receive. It does
-+ not include any MAC level (framing) octets. The
-+ value of this object is used by this bridge to
-+ determine whether a modification of the
-+ LargestFrame (LF, see [14]) field of the Routing
-+ Control field of the Routing Information Field is
-+ necessary.
-+
-+ 64 valid values are defined by the IEEE 802.5M SRT
-+ Addendum: 516, 635, 754, 873, 993, 1112, 1231,
-+ 1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906,
-+ 1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812,
-+ 4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197,
-+ 7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587,
-+ 10997, 11407, 12199, 12992, 13785, 14578, 15370,
-+ 16163, 16956, 17749, 20730, 23711, 26693, 29674,
-+ 32655, 35637, 38618, 41600, 44591, 47583, 50575,
-+ 53567, 56559, 59551, and 65535.
-+
-+ An illegal value will not be accepted by the
-+ bridge."
-+ ::= { dot1dSrPortEntry 6 }
-+
-+dot1dSrPortSTESpanMode OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ auto-span(1),
-+ disabled(2),
-+ forced(3)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Determines how this port behaves when presented
-+ with a Spanning Tree Explorer frame. The value
-+ 'disabled(2)' indicates that the port will not
-+ accept or send Spanning Tree Explorer packets; any
-+ STE packets received will be silently discarded.
-+ The value 'forced(3)' indicates the port will
-+ always accept and propagate Spanning Tree Explorer
-+ frames. This allows a manually configured
-+ Spanning Tree for this class of packet to be
-+ configured. Note that unlike transparent
-+ bridging, this is not catastrophic to the network
-+ if there are loops. The value 'auto-span(1)' can
-+ only be returned by a bridge that both implements
-+ the Spanning Tree Protocol and has use of the
-+ protocol enabled on this port. The behavior of the
-+ port for Spanning Tree Explorer frames is
-+ determined by the state of dot1dStpPortState. If
-+ the port is in the 'forwarding' state, the frame
-+ will be accepted or propagated. Otherwise, it
-+ will be silently discarded."
-+ ::= { dot1dSrPortEntry 7 }
-+
-+dot1dSrPortSpecInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of Specifically Routed frames, also
-+ referred to as Source Routed Frames, that have
-+ been received from this port's segment."
-+ ::= { dot1dSrPortEntry 8 }
-+
-+dot1dSrPortSpecOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of Specifically Routed frames, also
-+ referred to as Source Routed Frames, that this
-+ port has transmitted on its segment."
-+ ::= { dot1dSrPortEntry 9 }
-+
-+dot1dSrPortApeInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of All Paths Explorer frames, also
-+ referred to as All Routes Explorer frames, that
-+ have been received by this port from its segment."
-+ ::= { dot1dSrPortEntry 10 }
-+
-+dot1dSrPortApeOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of all Paths Explorer Frames, also
-+ referred to as All Routes Explorer frames, that
-+ have been transmitted by this port on its
-+ segment."
-+ ::= { dot1dSrPortEntry 11 }
-+
-+dot1dSrPortSteInFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of spanning tree explorer frames that
-+ have been received by this port from its segment."
-+ ::= { dot1dSrPortEntry 12 }
-+
-+dot1dSrPortSteOutFrames OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of spanning tree explorer frames that
-+ have been transmitted by this port on its
-+ segment."
-+ ::= { dot1dSrPortEntry 13 }
-+
-+dot1dSrPortSegmentMismatchDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of explorer frames that have been
-+ discarded by this port because the routing
-+ descriptor field contained an invalid adjacent
-+ segment value."
-+ ::= { dot1dSrPortEntry 14 }
-+
-+dot1dSrPortDuplicateSegmentDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of frames that have been discarded by
-+ this port because the routing descriptor field
-+ contained a duplicate segment identifier."
-+ ::= { dot1dSrPortEntry 15 }
-+
-+dot1dSrPortHopCountExceededDiscards OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of explorer frames that have been
-+ discarded by this port because the Routing
-+ Information Field has exceeded the maximum route
-+ descriptor length."
-+ ::= { dot1dSrPortEntry 16 }
-+
-+dot1dSrPortDupLanIdOrTreeErrors OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of duplicate LAN IDs or Tree errors.
-+ This helps in detection of problems in networks
-+ containing older IBM Source Routing Bridges."
-+ ::= { dot1dSrPortEntry 17 }
-+
-+dot1dSrPortLanIdMismatches OBJECT-TYPE
-+ SYNTAX Counter
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The number of ARE and STE frames that were
-+ discarded because the last LAN ID in the routing
-+ information field did not equal the LAN-in ID.
-+ This error can occur in implementations which do
-+ only a LAN-in ID and Bridge Number check instead
-+ of a LAN-in ID, Bridge Number, and LAN-out ID
-+ check before they forward broadcast frames."
-+ ::= { dot1dSrPortEntry 18 }
-+
-+-- scalar object in dot1dSr
-+
-+dot1dSrBridgeLfMode OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ mode3(1),
-+ mode6(2)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "Indicates whether the bridge operates using older
-+ 3 bit length negotiation fields or the newer 6 bit
-+ length field in its RIF."
-+ ::= { dot1dSr 2 }
-+
-+-- The Port-Pair Database
-+
-+-- Implementation of this group is optional.
-+
-+-- This group is implemented by those bridges that support
-+-- the direct multiport model of the source route bridging
-+-- mode as defined in the IEEE 802.5 SRT Addendum to
-+-- 802.1d.
-+
-+-- Bridges implementing this group may report 65535 for
-+-- dot1dSrPortBridgeNumber and dot1dSrPortTargetSegment,
-+-- indicating that those objects are not applicable.
-+
-+dot1dPortPairTableSize OBJECT-TYPE
-+ SYNTAX Gauge
-+ ACCESS read-only
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The total number of entries in the Bridge Port
-+ Pair Database."
-+ ::= { dot1dPortPair 1 }
-+
-+-- the Bridge Port-Pair table
-+
-+-- this table represents port pairs within a bridge forming
-+-- a unique bridge path, as defined in the IEEE 802.5M SRT
-+-- Addendum.
-+
-+dot1dPortPairTable OBJECT-TYPE
-+ SYNTAX SEQUENCE OF Dot1dPortPairEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A table that contains information about every
-+
-+ port pair database entity associated with this
-+ source routing bridge."
-+ ::= { dot1dPortPair 2 }
-+
-+dot1dPortPairEntry OBJECT-TYPE
-+ SYNTAX Dot1dPortPairEntry
-+ ACCESS not-accessible
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A list of information for each port pair entity
-+ of a bridge."
-+ INDEX { dot1dPortPairLowPort, dot1dPortPairHighPort }
-+ ::= { dot1dPortPairTable 1 }
-+
-+Dot1dPortPairEntry ::=
-+ SEQUENCE {
-+ dot1dPortPairLowPort
-+ INTEGER,
-+ dot1dPortPairHighPort
-+ INTEGER,
-+ dot1dPortPairBridgeNum
-+ INTEGER,
-+ dot1dPortPairBridgeState
-+ INTEGER
-+ }
-+
-+dot1dPortPairLowPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the lower numbered port for
-+ which this entry contains port pair database
-+ information."
-+ ::= { dot1dPortPairEntry 1 }
-+
-+dot1dPortPairHighPort OBJECT-TYPE
-+ SYNTAX INTEGER (1..65535)
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The port number of the higher numbered port for
-+ which this entry contains port pair database
-+ information."
-+ ::= { dot1dPortPairEntry 2 }
-+
-+dot1dPortPairBridgeNum OBJECT-TYPE
-+ SYNTAX INTEGER
-+
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "A bridge number that uniquely identifies the path
-+ provided by this source routing bridge between the
-+ segments connected to dot1dPortPairLowPort and
-+ dot1dPortPairHighPort. The purpose of bridge
-+ number is to disambiguate between multiple paths
-+ connecting the same two LANs."
-+ ::= { dot1dPortPairEntry 3 }
-+
-+dot1dPortPairBridgeState OBJECT-TYPE
-+ SYNTAX INTEGER {
-+ enabled(1),
-+ disabled(2),
-+ invalid(3)
-+ }
-+ ACCESS read-write
-+ STATUS mandatory
-+ DESCRIPTION
-+ "The state of dot1dPortPairBridgeNum. Writing
-+ 'invalid(3)' to this object removes the
-+ corresponding entry."
-+ ::= { dot1dPortPairEntry 4 }
-+
-+END
+++ /dev/null
---- /dev/null
-+++ b/agent/mibgroup/ieee802dot11.c
-@@ -0,0 +1,4915 @@
-+/****************************************************************************
-+* *
-+* File Name: ieee802dot11.c *
-+* Used By: *
-+* *
-+* Operating System: *
-+* Purpose: *
-+* *
-+* Comments: *
-+* *
-+* Author: Larry Simmons *
-+* lsimmons@avantcom.com *
-+* www.avantcom.com *
-+* *
-+* Creation Date: 09/02/03 *
-+* *
-+* Ver Date Inits Modification *
-+* ----- -------- ----- ------------ *
-+* 0.0.1 09/02/03 LRS created *
-+* 0.0.2 09/24/03 LRS wouldn't build after fresh ./configure *
-+****************************************************************************/
-+/****************************************************************************
-+* Includes *
-+****************************************************************************/
-+#include <net-snmp/net-snmp-config.h>
-+#include <net-snmp/net-snmp-includes.h>
-+#include <net-snmp/agent/net-snmp-agent-includes.h>
-+#include "ieee802dot11.h"
-+#include "iwlib.h"
-+
-+/****************************************************************************
-+* Defines *
-+****************************************************************************/
-+#define DISPLAYWIEXT // display wireless ext info
-+#define TABLE_SIZE 1
-+//#define MINLOADFREQ 15 // min reload frequency in seconds
-+#define MINLOADFREQ 5 // min reload frequency in seconds // for testing
-+#define PROC_NET_DEV "/proc/net/dev"
-+#define PROC_NET_WIRELESS "/proc/net/wireless"
-+
-+#ifndef UCHAR
-+ typedef unsigned char UCHAR;
-+#endif
-+
-+/****************************************************************************
-+* Private Functions *
-+****************************************************************************/
-+static void loadTables();
-+static void loadWiExt ( int, char *, struct wireless_info * );
-+static void load80211Structs ( int, char *, struct wireless_info * );
-+static void initStructs();
-+
-+// Wireless Extensions Specific Functions
-+static void loadWiExtTo80211Structs ( int, char *, struct wireless_info * );
-+static void displayWiExt ( struct wireless_info );
-+
-+// Linked List Functions
-+static void addList ( char *, char *, int );
-+static void initLists(); // initialize all the linked lists
-+static void flushLists(); // flush all the linked lists
-+static void flushList ( char * ); // flush a single linked list
-+
-+// Utility Functions
-+static int openSocket ( void );
-+static int mWatt2dbm ( int );
-+static char *htob ( char * );
-+static int hasChanged ( char *, int );
-+
-+/****************************************************************************
-+* Private Variables *
-+****************************************************************************/
-+static unsigned long lastLoad = 0; // ET in secs at last table load
-+
-+static struct avNode *lastNode, *newNode, *np;
-+
-+/****************************************************************************
-+* External Functions *
-+****************************************************************************/
-+
-+/****************************************************************************
-+* ieee802dot11_variables_oid: *
-+* this is the top level oid that we want to register under. This *
-+* is essentially a prefix, with the suffix appearing in the *
-+* variable below. *
-+****************************************************************************/
-+oid ieee802dot11_variables_oid[] = { 1,2,840,10036 };
-+
-+/****************************************************************************
-+* variable7 ieee802dot11_variables: *
-+* this variable defines function callbacks and type return information *
-+* for the ieee802dot11 mib section *
-+****************************************************************************/
-+struct variable7 ieee802dot11_variables[] = {
-+/* magic number , variable type , ro/rw , callback fn , L, oidsuffix */
-+#define DOT11STATIONID 3
-+ { DOT11STATIONID , ASN_OCTET_STR , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,1 } },
-+#define DOT11MEDIUMOCCUPANCYLIMIT 4
-+ { DOT11MEDIUMOCCUPANCYLIMIT, ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,2 } },
-+#define DOT11CFPOLLABLE 5
-+ { DOT11CFPOLLABLE , ASN_INTEGER , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,3 } },
-+#define DOT11CFPPERIOD 6
-+ { DOT11CFPPERIOD , ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,4 } },
-+#define DOT11CFPMAXDURATION 7
-+ { DOT11CFPMAXDURATION , ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,5 } },
-+#define DOT11AUTHENTICATIONRESPONSETIMEOUT 8
-+ { DOT11AUTHENTICATIONRESPONSETIMEOUT, ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,6 } },
-+#define DOT11PRIVACYOPTIONIMPLEMENTED 9
-+ { DOT11PRIVACYOPTIONIMPLEMENTED, ASN_INTEGER , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,7 } },
-+#define DOT11POWERMANAGEMENTMODE 10
-+ { DOT11POWERMANAGEMENTMODE, ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,8 } },
-+#define DOT11DESIREDSSID 11
-+ { DOT11DESIREDSSID , ASN_OCTET_STR , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,9 } },
-+#define DOT11DESIREDBSSTYPE 12
-+ { DOT11DESIREDBSSTYPE , ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,10 } },
-+#define DOT11OPERATIONALRATESET 13
-+ { DOT11OPERATIONALRATESET, ASN_OCTET_STR , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,11 } },
-+#define DOT11BEACONPERIOD 14
-+ { DOT11BEACONPERIOD , ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,12 } },
-+#define DOT11DTIMPERIOD 15
-+ { DOT11DTIMPERIOD , ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,13 } },
-+#define DOT11ASSOCIATIONRESPONSETIMEOUT 16
-+ { DOT11ASSOCIATIONRESPONSETIMEOUT, ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,14 } },
-+#define DOT11DISASSOCIATEREASON 17
-+ { DOT11DISASSOCIATEREASON, ASN_INTEGER , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,15 } },
-+#define DOT11DISASSOCIATESTATION 18
-+ { DOT11DISASSOCIATESTATION, ASN_OCTET_STR , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,16 } },
-+#define DOT11DEAUTHENTICATEREASON 19
-+ { DOT11DEAUTHENTICATEREASON, ASN_INTEGER , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,17 } },
-+#define DOT11DEAUTHENTICATESTATION 20
-+ { DOT11DEAUTHENTICATESTATION, ASN_OCTET_STR , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,18 } },
-+#define DOT11AUTHENTICATEFAILSTATUS 21
-+ { DOT11AUTHENTICATEFAILSTATUS, ASN_INTEGER , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,19 } },
-+#define DOT11AUTHENTICATEFAILSTATION 22
-+ { DOT11AUTHENTICATEFAILSTATION, ASN_OCTET_STR , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,20 } },
-+
-+#define DOT11AUTHENTICATIONALGORITHM 26
-+ { DOT11AUTHENTICATIONALGORITHM, ASN_INTEGER , RONLY , var_dot11AuthenticationAlgorithmsTable, 4, { 1,2,1,2 } },
-+#define DOT11AUTHENTICATIONALGORITHMSENABLE 27
-+ { DOT11AUTHENTICATIONALGORITHMSENABLE, ASN_INTEGER , RWRITE, var_dot11AuthenticationAlgorithmsTable, 4, { 1,2,1,3 } },
-+
-+#define DOT11WEPDEFAULTKEYVALUE 31
-+ { DOT11WEPDEFAULTKEYVALUE, ASN_OCTET_STR , RWRITE, var_dot11WEPDefaultKeysTable, 4, { 1,3,1,2 } },
-+
-+#define DOT11WEPKEYMAPPINGADDRESS 35
-+ { DOT11WEPKEYMAPPINGADDRESS, ASN_OCTET_STR , RWRITE, var_dot11WEPKeyMappingsTable, 4, { 1,4,1,2 } },
-+#define DOT11WEPKEYMAPPINGWEPON 36
-+ { DOT11WEPKEYMAPPINGWEPON, ASN_INTEGER , RWRITE, var_dot11WEPKeyMappingsTable, 4, { 1,4,1,3 } },
-+#define DOT11WEPKEYMAPPINGVALUE 37
-+ { DOT11WEPKEYMAPPINGVALUE, ASN_OCTET_STR , RWRITE, var_dot11WEPKeyMappingsTable, 4, { 1,4,1,4 } },
-+#define DOT11WEPKEYMAPPINGSTATUS 38
-+ { DOT11WEPKEYMAPPINGSTATUS, ASN_INTEGER , RWRITE, var_dot11WEPKeyMappingsTable, 4, { 1,4,1,5 } },
-+
-+#define DOT11PRIVACYINVOKED 41
-+ { DOT11PRIVACYINVOKED , ASN_INTEGER , RWRITE, var_dot11PrivacyTable, 4, { 1,5,1,1 } },
-+#define DOT11WEPDEFAULTKEYID 42
-+ { DOT11WEPDEFAULTKEYID, ASN_INTEGER , RWRITE, var_dot11PrivacyTable, 4, { 1,5,1,2 } },
-+#define DOT11WEPKEYMAPPINGLENGTH 43
-+ { DOT11WEPKEYMAPPINGLENGTH, ASN_INTEGER , RWRITE, var_dot11PrivacyTable, 4, { 1,5,1,3 } },
-+#define DOT11EXCLUDEUNENCRYPTED 44
-+ { DOT11EXCLUDEUNENCRYPTED, ASN_INTEGER , RWRITE, var_dot11PrivacyTable, 4, { 1,5,1,4 } },
-+#define DOT11WEPICVERRORCOUNT 45
-+ { DOT11WEPICVERRORCOUNT, ASN_COUNTER , RONLY , var_dot11PrivacyTable, 4, { 1,5,1,5 } },
-+#define DOT11WEPEXCLUDEDCOUNT 46
-+ { DOT11WEPEXCLUDEDCOUNT, ASN_COUNTER , RONLY , var_dot11PrivacyTable, 4, { 1,5,1,6 } },
-+
-+#define DOT11MACADDRESS 49
-+ { DOT11MACADDRESS , ASN_OCTET_STR , RONLY , var_dot11OperationTable, 4, { 2,1,1,1 } },
-+#define DOT11RTSTHRESHOLD 50
-+ { DOT11RTSTHRESHOLD , ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,2 } },
-+#define DOT11SHORTRETRYLIMIT 51
-+ { DOT11SHORTRETRYLIMIT, ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,3 } },
-+#define DOT11LONGRETRYLIMIT 52
-+ { DOT11LONGRETRYLIMIT , ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,4 } },
-+#define DOT11FRAGMENTATIONTHRESHOLD 53
-+ { DOT11FRAGMENTATIONTHRESHOLD, ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,5 } },
-+#define DOT11MAXTRANSMITMSDULIFETIME 54
-+ { DOT11MAXTRANSMITMSDULIFETIME, ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,6 } },
-+#define DOT11MAXRECEIVELIFETIME 55
-+ { DOT11MAXRECEIVELIFETIME, ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,7 } },
-+#define DOT11MANUFACTURERID 56
-+ { DOT11MANUFACTURERID , ASN_OCTET_STR , RONLY , var_dot11OperationTable, 4, { 2,1,1,8 } },
-+#define DOT11PRODUCTID 57
-+ { DOT11PRODUCTID , ASN_OCTET_STR , RONLY , var_dot11OperationTable, 4, { 2,1,1,9 } },
-+
-+#define DOT11TRANSMITTEDFRAGMENTCOUNT 60
-+ { DOT11TRANSMITTEDFRAGMENTCOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,1 } },
-+#define DOT11MULTICASTTRANSMITTEDFRAMECOUNT 61
-+ { DOT11MULTICASTTRANSMITTEDFRAMECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,2 } },
-+#define DOT11FAILEDCOUNT 62
-+ { DOT11FAILEDCOUNT , ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,3 } },
-+#define DOT11RETRYCOUNT 63
-+ { DOT11RETRYCOUNT , ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,4 } },
-+#define DOT11MULTIPLERETRYCOUNT 64
-+ { DOT11MULTIPLERETRYCOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,5 } },
-+#define DOT11FRAMEDUPLICATECOUNT 65
-+ { DOT11FRAMEDUPLICATECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,6 } },
-+#define DOT11RTSSUCCESSCOUNT 66
-+ { DOT11RTSSUCCESSCOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,7 } },
-+#define DOT11RTSFAILURECOUNT 67
-+ { DOT11RTSFAILURECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,8 } },
-+#define DOT11ACKFAILURECOUNT 68
-+ { DOT11ACKFAILURECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,9 } },
-+#define DOT11RECEIVEDFRAGMENTCOUNT 69
-+ { DOT11RECEIVEDFRAGMENTCOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,10 } },
-+#define DOT11MULTICASTRECEIVEDFRAMECOUNT 70
-+ { DOT11MULTICASTRECEIVEDFRAMECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,11 } },
-+#define DOT11FCSERRORCOUNT 71
-+ { DOT11FCSERRORCOUNT , ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,12 } },
-+#define DOT11TRANSMITTEDFRAMECOUNT 72
-+ { DOT11TRANSMITTEDFRAMECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,13 } },
-+#define DOT11WEPUNDECRYPTABLECOUNT 73
-+ { DOT11WEPUNDECRYPTABLECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,14 } },
-+
-+#define DOT11ADDRESS 77
-+ { DOT11ADDRESS , ASN_OCTET_STR , RWRITE, var_dot11GroupAddressesTable, 4, { 2,3,1,2 } },
-+#define DOT11GROUPADDRESSESSTATUS 78
-+ { DOT11GROUPADDRESSESSTATUS, ASN_INTEGER , RWRITE, var_dot11GroupAddressesTable, 4, { 2,3,1,3 } },
-+
-+#define DOT11RESOURCETYPEIDNAME 79
-+ { DOT11RESOURCETYPEIDNAME, ASN_OCTET_STR , RONLY , var_ieee802dot11, 3, { 3,1,1 } },
-+#define DOT11MANUFACTUREROUI 82
-+ { DOT11MANUFACTUREROUI, ASN_OCTET_STR , RONLY , var_dot11ResourceInfoTable, 5, { 3,1,2,1,1 } },
-+#define DOT11MANUFACTURERNAME 83
-+ { DOT11MANUFACTURERNAME, ASN_OCTET_STR , RONLY , var_dot11ResourceInfoTable, 5, { 3,1,2,1,2 } },
-+#define DOT11MANUFACTURERPRODUCTNAME 84
-+ { DOT11MANUFACTURERPRODUCTNAME, ASN_OCTET_STR , RONLY , var_dot11ResourceInfoTable, 5, { 3,1,2,1,3 } },
-+#define DOT11MANUFACTURERPRODUCTVERSION 85
-+ { DOT11MANUFACTURERPRODUCTVERSION, ASN_OCTET_STR , RONLY , var_dot11ResourceInfoTable, 5, { 3,1,2,1,4 } },
-+
-+#define DOT11PHYTYPE 88
-+ { DOT11PHYTYPE , ASN_INTEGER , RONLY , var_dot11PhyOperationTable, 4, { 4,1,1,1 } },
-+#define DOT11CURRENTREGDOMAIN 89
-+ { DOT11CURRENTREGDOMAIN, ASN_INTEGER , RWRITE, var_dot11PhyOperationTable, 4, { 4,1,1,2 } },
-+#define DOT11TEMPTYPE 90
-+ { DOT11TEMPTYPE , ASN_INTEGER , RONLY , var_dot11PhyOperationTable, 4, { 4,1,1,3 } },
-+#define DOT11CURRENTTXANTENNA 93
-+ { DOT11CURRENTTXANTENNA, ASN_INTEGER , RWRITE, var_dot11PhyAntennaTable, 4, { 4,2,1,1 } },
-+#define DOT11DIVERSITYSUPPORT 94
-+ { DOT11DIVERSITYSUPPORT, ASN_INTEGER , RONLY , var_dot11PhyAntennaTable, 4, { 4,2,1,2 } },
-+#define DOT11CURRENTRXANTENNA 95
-+ { DOT11CURRENTRXANTENNA, ASN_INTEGER , RWRITE, var_dot11PhyAntennaTable, 4, { 4,2,1,3 } },
-+#define DOT11NUMBERSUPPORTEDPOWERLEVELS 98
-+ { DOT11NUMBERSUPPORTEDPOWERLEVELS, ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,1 } },
-+#define DOT11TXPOWERLEVEL1 99
-+ { DOT11TXPOWERLEVEL1 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,2 } },
-+#define DOT11TXPOWERLEVEL2 100
-+ { DOT11TXPOWERLEVEL2 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,3 } },
-+#define DOT11TXPOWERLEVEL3 101
-+ { DOT11TXPOWERLEVEL3 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,4 } },
-+#define DOT11TXPOWERLEVEL4 102
-+ { DOT11TXPOWERLEVEL4 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,5 } },
-+#define DOT11TXPOWERLEVEL5 103
-+ { DOT11TXPOWERLEVEL5 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,6 } },
-+#define DOT11TXPOWERLEVEL6 104
-+ { DOT11TXPOWERLEVEL6 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,7 } },
-+#define DOT11TXPOWERLEVEL7 105
-+ { DOT11TXPOWERLEVEL7 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,8 } },
-+#define DOT11TXPOWERLEVEL8 106
-+ { DOT11TXPOWERLEVEL8 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,9 } },
-+#define DOT11CURRENTTXPOWERLEVEL 107
-+ { DOT11CURRENTTXPOWERLEVEL, ASN_INTEGER , RWRITE, var_dot11PhyTxPowerTable, 4, { 4,3,1,10 } },
-+
-+#define DOT11HOPTIME 110
-+ { DOT11HOPTIME , ASN_INTEGER , RONLY , var_dot11PhyFHSSTable, 4, { 4,4,1,1 } },
-+#define DOT11CURRENTCHANNELNUMBER 111
-+ { DOT11CURRENTCHANNELNUMBER, ASN_INTEGER , RWRITE, var_dot11PhyFHSSTable, 4, { 4,4,1,2 } },
-+#define DOT11MAXDWELLTIME 112
-+ { DOT11MAXDWELLTIME , ASN_INTEGER , RONLY , var_dot11PhyFHSSTable, 4, { 4,4,1,3 } },
-+#define DOT11CURRENTDWELLTIME 113
-+ { DOT11CURRENTDWELLTIME, ASN_INTEGER , RWRITE, var_dot11PhyFHSSTable, 4, { 4,4,1,4 } },
-+#define DOT11CURRENTSET 114
-+ { DOT11CURRENTSET , ASN_INTEGER , RWRITE, var_dot11PhyFHSSTable, 4, { 4,4,1,5 } },
-+#define DOT11CURRENTPATTERN 115
-+ { DOT11CURRENTPATTERN , ASN_INTEGER , RWRITE, var_dot11PhyFHSSTable, 4, { 4,4,1,6 } },
-+#define DOT11CURRENTINDEX 116
-+ { DOT11CURRENTINDEX , ASN_INTEGER , RWRITE, var_dot11PhyFHSSTable, 4, { 4,4,1,7 } },
-+
-+#define DOT11CURRENTCHANNEL 119
-+ { DOT11CURRENTCHANNEL , ASN_INTEGER , RWRITE, var_dot11PhyDSSSTable, 4, { 4,5,1,1 } },
-+#define DOT11CCAMODESUPPORTED 120
-+ { DOT11CCAMODESUPPORTED, ASN_INTEGER , RONLY , var_dot11PhyDSSSTable, 4, { 4,5,1,2 } },
-+#define DOT11CURRENTCCAMODE 121
-+ { DOT11CURRENTCCAMODE , ASN_INTEGER , RWRITE, var_dot11PhyDSSSTable, 4, { 4,5,1,3 } },
-+#define DOT11EDTHRESHOLD 122
-+ { DOT11EDTHRESHOLD , ASN_INTEGER , RWRITE, var_dot11PhyDSSSTable, 4, { 4,5,1,4 } },
-+
-+#define DOT11CCAWATCHDOGTIMERMAX 125
-+ { DOT11CCAWATCHDOGTIMERMAX, ASN_INTEGER , RWRITE, var_dot11PhyIRTable, 4, { 4,6,1,1 } },
-+#define DOT11CCAWATCHDOGCOUNTMAX 126
-+ { DOT11CCAWATCHDOGCOUNTMAX, ASN_INTEGER , RWRITE, var_dot11PhyIRTable, 4, { 4,6,1,2 } },
-+#define DOT11CCAWATCHDOGTIMERMIN 127
-+ { DOT11CCAWATCHDOGTIMERMIN, ASN_INTEGER , RWRITE, var_dot11PhyIRTable, 4, { 4,6,1,3 } },
-+#define DOT11CCAWATCHDOGCOUNTMIN 128
-+ { DOT11CCAWATCHDOGCOUNTMIN, ASN_INTEGER , RWRITE, var_dot11PhyIRTable, 4, { 4,6,1,4 } },
-+
-+#define DOT11REGDOMAINSSUPPORTVALUE 132
-+ { DOT11REGDOMAINSSUPPORTVALUE, ASN_INTEGER , RONLY , var_dot11RegDomainsSupportedTable, 4, { 4,7,1,2 } },
-+
-+#define DOT11SUPPORTEDTXANTENNA 136
-+ { DOT11SUPPORTEDTXANTENNA, ASN_INTEGER , RWRITE, var_dot11AntennasListTable, 4, { 4,8,1,2 } },
-+#define DOT11SUPPORTEDRXANTENNA 137
-+ { DOT11SUPPORTEDRXANTENNA, ASN_INTEGER , RWRITE, var_dot11AntennasListTable, 4, { 4,8,1,3 } },
-+#define DOT11DIVERSITYSELECTIONRX 138
-+ { DOT11DIVERSITYSELECTIONRX, ASN_INTEGER , RWRITE, var_dot11AntennasListTable, 4, { 4,8,1,4 } },
-+
-+#define DOT11SUPPORTEDDATARATESTXVALUE 142
-+ { DOT11SUPPORTEDDATARATESTXVALUE, ASN_INTEGER , RONLY , var_dot11SupportedDataRatesTxTable, 4, { 4,9,1,2 } },
-+
-+#define DOT11SUPPORTEDDATARATESRXVALUE 146
-+ { DOT11SUPPORTEDDATARATESRXVALUE, ASN_INTEGER , RONLY , var_dot11SupportedDataRatesRxTable, 4, { 4,10,1,2 } },
-+};
-+// ( L = length of the oidsuffix )
-+
-+/****************************************************************************
-+* *
-+* init_ieee802dot11() - perform any required initialization *
-+* *
-+****************************************************************************/
-+void init_ieee802dot11 ( void ) {
-+
-+ /* register ourselves with the agent to handle our mib tree */
-+ REGISTER_MIB("ieee802dot11", ieee802dot11_variables, variable7,
-+ ieee802dot11_variables_oid);
-+
-+ initLists();
-+}
-+
-+/****************************************************************************
-+* *
-+* shutdown_ieee802dot11() - perform any required cleanup @ shutdown *
-+* *
-+****************************************************************************/
-+void shutdown_ieee802dot11 ( void )
-+{
-+ flushLists();
-+}
-+
-+/****************************************************************************
-+* *
-+* var_ieee802dot11() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_ieee802dot11 ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method)
-+{
-+ loadTables();
-+
-+ if ( header_generic ( vp, name, length, exact,var_len,write_method )
-+ == MATCH_FAILED )
-+ return NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11RESOURCETYPEIDNAME:
-+ if ( !haveResourceTypeIDName )
-+ return NULL;
-+ *var_len = strlen ( resourceTypeIDName );
-+ return ( UCHAR * ) resourceTypeIDName;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11StationConfigTable() - return a variable value from the table *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11StationConfigTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+ static char MACWork[17];
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &scList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ sc = ( struct scTbl_data * ) np->data;
-+ rName[vp->namelen] = sc->ifIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) {
-+
-+ switch ( vp->magic ) { // found requested OID, now check for requested variable
-+ case DOT11STATIONID:
-+ if ( sc->haveStationID ) found = TRUE; break;
-+ case DOT11MEDIUMOCCUPANCYLIMIT:
-+ if ( sc->haveMediumOccupancyLimit ) found = TRUE; break;
-+ case DOT11CFPOLLABLE:
-+ if ( sc->haveCFPPollable ) found = TRUE; break;
-+ case DOT11CFPPERIOD:
-+ if ( sc->haveCFPPeriod ) found = TRUE; break;
-+ case DOT11CFPMAXDURATION:
-+ if ( sc->haveMaxDuration ) found = TRUE; break;
-+ case DOT11AUTHENTICATIONRESPONSETIMEOUT:
-+ if ( sc->haveAuthenticationResponseTimeOut ) found = TRUE; break;
-+ case DOT11PRIVACYOPTIONIMPLEMENTED:
-+ if ( sc->havePrivacyOptionImplemented ) found = TRUE; break;
-+ case DOT11POWERMANAGEMENTMODE:
-+ if ( sc->havePowerManagementMode ) found = TRUE; break;
-+ case DOT11DESIREDSSID:
-+ if ( sc->haveDesiredSSID ) found = TRUE; break;
-+ case DOT11DESIREDBSSTYPE:
-+ if ( sc->haveDesiredBSSType ) found = TRUE; break;
-+ case DOT11OPERATIONALRATESET:
-+ if ( sc->haveOperationalRateSet ) found = TRUE; break;
-+ case DOT11BEACONPERIOD:
-+ if ( sc->haveBeaconPeriod ) found = TRUE; break;
-+ case DOT11DTIMPERIOD:
-+ if ( sc->haveDTIMPeriod ) found = TRUE; break;
-+ case DOT11ASSOCIATIONRESPONSETIMEOUT:
-+ if ( sc->haveAssociationResponseTimeOut ) found = TRUE; break;
-+ case DOT11DISASSOCIATEREASON:
-+ if ( sc->disAssociationReason ) found = TRUE; break;
-+ case DOT11DISASSOCIATESTATION:
-+ if ( sc->haveDisAssociationStation ) found = TRUE; break;
-+ case DOT11DEAUTHENTICATEREASON:
-+ if ( sc->deAuthenticationReason ) found = TRUE; break;
-+ case DOT11DEAUTHENTICATESTATION:
-+ if ( sc->haveDeAuthenticationStation ) found = TRUE; break;
-+ case DOT11AUTHENTICATEFAILSTATUS:
-+ if ( sc->authenticateFailStatus ) found = TRUE; break;
-+ case DOT11AUTHENTICATEFAILSTATION:
-+ if ( sc->haveAuthenticateFailStation ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid ));
-+ *length = vp->namelen + 1;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11STATIONID:
-+// *write_method = write_dot11StationID;
-+ MACWork[ 0] = sc->stationID [ 0];
-+ MACWork[ 1] = sc->stationID [ 1];
-+ MACWork[ 2] = sc->stationID [ 3];
-+ MACWork[ 3] = sc->stationID [ 4];
-+ MACWork[ 4] = sc->stationID [ 6];
-+ MACWork[ 5] = sc->stationID [ 7];
-+ MACWork[ 6] = sc->stationID [ 9];
-+ MACWork[ 7] = sc->stationID [10];
-+ MACWork[ 8] = sc->stationID [12];
-+ MACWork[ 9] = sc->stationID [13];
-+ MACWork[10] = sc->stationID [15];
-+ MACWork[11] = sc->stationID [16];
-+ MACWork[12] = '\0';
-+ *var_len = 6;
-+ return ( UCHAR * ) htob ( MACWork );
-+
-+ case DOT11MEDIUMOCCUPANCYLIMIT:
-+// *write_method = write_dot11MediumOccupancyLimit;
-+ sc->mediumOccupancyLimit = 5;
-+ return ( UCHAR * ) &sc->mediumOccupancyLimit;
-+
-+ case DOT11CFPOLLABLE:
-+ return ( UCHAR * ) &sc->CFPPollable;
-+
-+ case DOT11CFPPERIOD:
-+// *write_method = write_dot11CFPPeriod;
-+ return ( UCHAR * ) &sc->CFPPeriod;
-+
-+ case DOT11CFPMAXDURATION:
-+// *write_method = write_dot11CFPMaxDuration;
-+ return ( UCHAR * ) &sc->maxDuration;
-+
-+ case DOT11AUTHENTICATIONRESPONSETIMEOUT:
-+// *write_method = write_dot11AuthenticationResponseTimeOut;
-+ return ( UCHAR * ) &sc->authenticationResponseTimeOut;
-+
-+ case DOT11PRIVACYOPTIONIMPLEMENTED:
-+ return ( UCHAR * ) &sc->privacyOptionImplemented;
-+
-+ case DOT11POWERMANAGEMENTMODE:
-+// *write_method = write_dot11PowerManagementMode;
-+ return ( UCHAR * ) &sc->powerManagementMode;
-+
-+ case DOT11DESIREDSSID:
-+// *write_method = write_dot11DesiredSSID;
-+ *var_len = strlen ( sc->desiredSSID );
-+ return ( UCHAR * ) sc->desiredSSID;
-+
-+ case DOT11DESIREDBSSTYPE:
-+// *write_method = write_dot11DesiredBSSType;
-+ return ( UCHAR * ) &sc->desiredBSSType;
-+
-+ case DOT11OPERATIONALRATESET:
-+// *write_method = write_dot11OperationalRateSet;
-+ *var_len = strlen ( sc->operationalRateSet );
-+ return ( UCHAR * ) sc->operationalRateSet;
-+
-+ case DOT11BEACONPERIOD:
-+// *write_method = write_dot11BeaconPeriod;
-+ return ( UCHAR * ) &sc->beaconPeriod;
-+
-+ case DOT11DTIMPERIOD:
-+// *write_method = write_dot11DTIMPeriod;
-+ return ( UCHAR * ) &sc->DTIMPeriod;
-+
-+ case DOT11ASSOCIATIONRESPONSETIMEOUT:
-+// *write_method = write_dot11AssociationResponseTimeOut;
-+ return ( UCHAR * ) &sc->associationResponseTimeOut;
-+
-+ case DOT11DISASSOCIATEREASON:
-+ return ( UCHAR * ) &sc->disAssociationReason;
-+
-+ case DOT11DISASSOCIATESTATION:
-+ MACWork[ 0] = sc->disAssociationStation[ 0];
-+ MACWork[ 1] = sc->disAssociationStation[ 1];
-+ MACWork[ 2] = sc->disAssociationStation[ 3];
-+ MACWork[ 3] = sc->disAssociationStation[ 4];
-+ MACWork[ 4] = sc->disAssociationStation[ 6];
-+ MACWork[ 5] = sc->disAssociationStation[ 7];
-+ MACWork[ 6] = sc->disAssociationStation[ 9];
-+ MACWork[ 7] = sc->disAssociationStation[10];
-+ MACWork[ 8] = sc->disAssociationStation[12];
-+ MACWork[ 9] = sc->disAssociationStation[13];
-+ MACWork[10] = sc->disAssociationStation[15];
-+ MACWork[11] = sc->disAssociationStation[16];
-+ MACWork[12] = '\0';
-+ *var_len = 6;
-+ return ( UCHAR * ) htob ( MACWork );
-+
-+ case DOT11DEAUTHENTICATEREASON:
-+ return ( UCHAR * ) &sc->deAuthenticationReason;
-+
-+ case DOT11DEAUTHENTICATESTATION:
-+ MACWork[ 0] = sc->deAuthenticationStation[ 0];
-+ MACWork[ 1] = sc->deAuthenticationStation[ 1];
-+ MACWork[ 2] = sc->deAuthenticationStation[ 3];
-+ MACWork[ 3] = sc->deAuthenticationStation[ 4];
-+ MACWork[ 4] = sc->deAuthenticationStation[ 6];
-+ MACWork[ 5] = sc->deAuthenticationStation[ 7];
-+ MACWork[ 6] = sc->deAuthenticationStation[ 9];
-+ MACWork[ 7] = sc->deAuthenticationStation[10];
-+ MACWork[ 8] = sc->deAuthenticationStation[12];
-+ MACWork[ 9] = sc->deAuthenticationStation[13];
-+ MACWork[10] = sc->deAuthenticationStation[15];
-+ MACWork[11] = sc->deAuthenticationStation[16];
-+ MACWork[12] = '\0';
-+ *var_len = 6;
-+ return ( UCHAR * ) htob ( MACWork );
-+
-+ case DOT11AUTHENTICATEFAILSTATUS:
-+ return ( UCHAR * ) &sc->authenticateFailStatus;
-+
-+ case DOT11AUTHENTICATEFAILSTATION:
-+ MACWork[ 0] = sc->authenticateFailStation[ 0];
-+ MACWork[ 1] = sc->authenticateFailStation[ 1];
-+ MACWork[ 2] = sc->authenticateFailStation[ 3];
-+ MACWork[ 3] = sc->authenticateFailStation[ 4];
-+ MACWork[ 4] = sc->authenticateFailStation[ 6];
-+ MACWork[ 5] = sc->authenticateFailStation[ 7];
-+ MACWork[ 6] = sc->authenticateFailStation[ 9];
-+ MACWork[ 7] = sc->authenticateFailStation[10];
-+ MACWork[ 8] = sc->authenticateFailStation[12];
-+ MACWork[ 9] = sc->authenticateFailStation[13];
-+ MACWork[10] = sc->authenticateFailStation[15];
-+ MACWork[11] = sc->authenticateFailStation[16];
-+ MACWork[12] = '\0';
-+ *var_len = 6;
-+ return ( UCHAR * ) htob ( MACWork );
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11AuthenticationAlgorithmsTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11AuthenticationAlgorithmsTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &aaList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ aa = ( struct aaTbl_data * ) np->data;
-+ rName[vp->namelen + 0] = aa->ifIndex;
-+ rName[vp->namelen + 1] = aa->authenticationAlgorithmsIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11AUTHENTICATIONALGORITHM:
-+ if ( aa->haveAuthenticationAlgorithm ) found = TRUE; break;
-+ case DOT11AUTHENTICATIONALGORITHMSENABLE:
-+ if ( aa->authenticationAlgorithmsEnable ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid ));
-+ *length = vp->namelen + 2;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11AUTHENTICATIONALGORITHM:
-+ return ( UCHAR * ) &aa->authenticationAlgorithm;
-+
-+ case DOT11AUTHENTICATIONALGORITHMSENABLE:
-+// *write_method = write_dot11AuthenticationAlgorithmsEnable;
-+ return ( UCHAR * ) &aa->authenticationAlgorithmsEnable;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11WEPDefaultKeysTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11WEPDefaultKeysTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &dfList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ df = ( struct dfTbl_data * ) np->data;
-+ rName[vp->namelen + 0] = df->ifIndex;
-+ rName[vp->namelen + 1] = df->WEPDefaultKeyIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11WEPDEFAULTKEYVALUE:
-+ if ( df->haveWEPDefaultKeyValue ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid ));
-+ *length = vp->namelen + 2;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11WEPDEFAULTKEYVALUE:
-+// *write_method = write_dot11WEPDefaultKeyValue;
-+ *var_len = strlen ( df->WEPDefaultKeyValue );
-+ return ( UCHAR * ) df->WEPDefaultKeyValue;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11WEPKeyMappingsTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11WEPKeyMappingsTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method)
-+{
-+ static char MACWork[17];
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &kmList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ km = ( struct kmTbl_data * ) np->data;
-+ rName[vp->namelen + 0] = km->ifIndex;
-+ rName[vp->namelen + 1] = km->WEPKeyMappingIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11WEPKEYMAPPINGADDRESS:
-+ if ( km->haveWEPKeyMappingAddress ) found = TRUE; break;
-+ case DOT11WEPKEYMAPPINGWEPON:
-+ if ( km->haveWEPKeyMappingWEPOn ) found = TRUE; break;
-+ case DOT11WEPKEYMAPPINGVALUE:
-+ if ( km->haveWEPKeyMappingValue ) found = TRUE; break;
-+ case DOT11WEPKEYMAPPINGSTATUS:
-+ if ( km->haveWEPKeyMappingStatus ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid ));
-+ *length = vp->namelen + 2;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11WEPKEYMAPPINGADDRESS:
-+// *write_method = write_dot11WEPKeyMappingAddress;
-+ MACWork[ 0] = km->WEPKeyMappingAddress[ 0];
-+ MACWork[ 1] = km->WEPKeyMappingAddress[ 1];
-+ MACWork[ 2] = km->WEPKeyMappingAddress[ 3];
-+ MACWork[ 3] = km->WEPKeyMappingAddress[ 4];
-+ MACWork[ 4] = km->WEPKeyMappingAddress[ 6];
-+ MACWork[ 5] = km->WEPKeyMappingAddress[ 7];
-+ MACWork[ 6] = km->WEPKeyMappingAddress[ 9];
-+ MACWork[ 7] = km->WEPKeyMappingAddress[10];
-+ MACWork[ 8] = km->WEPKeyMappingAddress[12];
-+ MACWork[ 9] = km->WEPKeyMappingAddress[13];
-+ MACWork[10] = km->WEPKeyMappingAddress[15];
-+ MACWork[11] = km->WEPKeyMappingAddress[16];
-+ MACWork[12] = '\0';
-+ *var_len = 6;
-+ return ( UCHAR * ) htob ( MACWork );
-+
-+ case DOT11WEPKEYMAPPINGWEPON:
-+// *write_method = write_dot11WEPKeyMappingWEPOn;
-+ return ( UCHAR * ) &km->WEPKeyMappingWEPOn;
-+
-+ case DOT11WEPKEYMAPPINGVALUE:
-+// *write_method = write_dot11WEPKeyMappingValue;
-+ *var_len = strlen ( km->WEPKeyMappingValue );
-+ return ( UCHAR * ) km->WEPKeyMappingValue;
-+
-+ case DOT11WEPKEYMAPPINGSTATUS:
-+// *write_method = write_dot11WEPKeyMappingStatus;
-+ return ( UCHAR * ) &km->WEPKeyMappingStatus;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11PrivacyTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11PrivacyTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &prList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ pr = ( struct prTbl_data * ) np->data;
-+ rName[vp->namelen] = pr->ifIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11PRIVACYINVOKED:
-+ if ( pr->havePrivacyInvoked ) found = TRUE; break;
-+ case DOT11WEPDEFAULTKEYID:
-+ if ( pr->haveWEPDefaultKeyID ) found = TRUE; break;
-+ case DOT11WEPKEYMAPPINGLENGTH:
-+ if ( pr->haveWEPKeyMappingLength ) found = TRUE; break;
-+ case DOT11EXCLUDEUNENCRYPTED:
-+ if ( pr->haveExcludeUnencrypted ) found = TRUE; break;
-+ case DOT11WEPICVERRORCOUNT:
-+ if ( pr->haveWEPICVErrorCount ) found = TRUE; break;
-+ case DOT11WEPEXCLUDEDCOUNT:
-+ if ( pr->haveWEPExcludedCount ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid ));
-+ *length = vp->namelen + 1;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11PRIVACYINVOKED:
-+// *write_method = write_dot11PrivacyInvoked;
-+ return ( UCHAR * ) &pr->privacyInvoked;
-+
-+ case DOT11WEPDEFAULTKEYID:
-+// *write_method = write_dot11WEPDefaultKeyID;
-+ return ( UCHAR * ) &pr->WEPDefaultKeyID;
-+
-+ case DOT11WEPKEYMAPPINGLENGTH:
-+// *write_method = write_dot11WEPKeyMappingLength;
-+ return ( UCHAR * ) &pr->WEPKeyMappingLength;
-+
-+ case DOT11EXCLUDEUNENCRYPTED:
-+// *write_method = write_dot11ExcludeUnencrypted;
-+ return ( UCHAR * ) &pr->excludeUnencrypted;
-+
-+ case DOT11WEPICVERRORCOUNT:
-+ return ( UCHAR * ) &pr->WEPICVErrorCount;
-+
-+ case DOT11WEPEXCLUDEDCOUNT:
-+ return ( UCHAR * ) &pr->WEPExcludedCount;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11OperationTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11OperationTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+ static char MACWork[17];
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &opList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ op = ( struct opTbl_data * ) np->data;
-+ rName[vp->namelen] = op->ifIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) {
-+
-+ switch ( vp->magic ) { // found requested OID, now check for requested variable
-+ case DOT11MACADDRESS:
-+ if ( op->haveMACAddress ) found = TRUE; break;
-+ case DOT11RTSTHRESHOLD:
-+ if ( op->haveRTSThreshold ) found = TRUE; break;
-+ case DOT11SHORTRETRYLIMIT:
-+ if ( op->haveShortRetryLimit ) found = TRUE; break;
-+ case DOT11LONGRETRYLIMIT:
-+ if ( op->haveLongRetryLimit ) found = TRUE; break;
-+ case DOT11FRAGMENTATIONTHRESHOLD:
-+ if ( op->haveFragmentationThreshold ) found = TRUE; break;
-+ case DOT11MAXTRANSMITMSDULIFETIME:
-+ if ( op->haveMaxTransmitMSDULifetime ) found = TRUE; break;
-+ case DOT11MAXRECEIVELIFETIME:
-+ if ( op->haveMaxReceiveLifetime ) found = TRUE; break;
-+ case DOT11MANUFACTURERID:
-+ if ( op->haveManufacturerID ) found = TRUE; break;
-+ case DOT11PRODUCTID:
-+ if ( op->haveProductID ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid ));
-+ *length = vp->namelen + 1;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11MACADDRESS:
-+ MACWork[ 0] = op->MACAddress[ 0];
-+ MACWork[ 1] = op->MACAddress[ 1];
-+ MACWork[ 2] = op->MACAddress[ 3];
-+ MACWork[ 3] = op->MACAddress[ 4];
-+ MACWork[ 4] = op->MACAddress[ 6];
-+ MACWork[ 5] = op->MACAddress[ 7];
-+ MACWork[ 6] = op->MACAddress[ 9];
-+ MACWork[ 7] = op->MACAddress[10];
-+ MACWork[ 8] = op->MACAddress[12];
-+ MACWork[ 9] = op->MACAddress[13];
-+ MACWork[10] = op->MACAddress[15];
-+ MACWork[11] = op->MACAddress[16];
-+ MACWork[12] = '\0';
-+ *var_len = 6;
-+ return ( UCHAR * ) htob ( MACWork );
-+
-+ case DOT11RTSTHRESHOLD:
-+// *write_method = write_dot11RTSThreshold;
-+ return ( UCHAR * ) &op->RTSThreshold;
-+
-+ case DOT11SHORTRETRYLIMIT:
-+// *write_method = write_dot11ShortRetryLimit;
-+ return ( UCHAR * ) &op->shortRetryLimit;
-+
-+ case DOT11LONGRETRYLIMIT:
-+// *write_method = write_dot11LongRetryLimit;
-+ return ( UCHAR * ) &op->longRetryLimit;
-+
-+ case DOT11FRAGMENTATIONTHRESHOLD:
-+// *write_method = write_dot11FragmentationThreshold;
-+ return ( UCHAR * ) &op->fragmentationThreshold;
-+
-+ case DOT11MAXTRANSMITMSDULIFETIME:
-+// *write_method = write_dot11MaxTransmitMSDULifetime;
-+ return ( UCHAR * ) &op->maxTransmitMSDULifetime;
-+
-+ case DOT11MAXRECEIVELIFETIME:
-+// *write_method = write_dot11MaxReceiveLifetime;
-+ return ( UCHAR * ) &op->maxReceiveLifetime;
-+
-+ case DOT11MANUFACTURERID:
-+ *var_len = strlen ( op->manufacturerID );
-+ return ( UCHAR * ) op->manufacturerID;
-+
-+ case DOT11PRODUCTID:
-+ *var_len = strlen ( op->productID );
-+ return ( UCHAR * ) op->productID;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11CountersTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11CountersTable(struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method)
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &coList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ co = ( struct coTbl_data * ) np->data;
-+ rName[vp->namelen] = co->ifIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11TRANSMITTEDFRAGMENTCOUNT:
-+ if ( co->haveTransmittedFragmentCount ) found = TRUE; break;
-+ case DOT11MULTICASTTRANSMITTEDFRAMECOUNT:
-+ if ( co->haveTransmittedFrameCount ) found = TRUE; break;
-+ case DOT11FAILEDCOUNT:
-+ if ( co->haveFailedCount ) found = TRUE; break;
-+ case DOT11RETRYCOUNT:
-+ if ( co->haveRetryCount ) found = TRUE; break;
-+ case DOT11MULTIPLERETRYCOUNT:
-+ if ( co->haveMultipleRetryCount ) found = TRUE; break;
-+ case DOT11FRAMEDUPLICATECOUNT:
-+ if ( co->haveFrameDuplicateCount ) found = TRUE; break;
-+ case DOT11RTSSUCCESSCOUNT:
-+ if ( co->haveRTSSuccessCount ) found = TRUE; break;
-+ case DOT11RTSFAILURECOUNT:
-+ if ( co->haveRTSFailureCount ) found = TRUE; break;
-+ case DOT11ACKFAILURECOUNT:
-+ if ( co->haveACKFailureCount ) found = TRUE; break;
-+ case DOT11RECEIVEDFRAGMENTCOUNT:
-+ if ( co->haveReceivedFragmentCount ) found = TRUE; break;
-+ case DOT11MULTICASTRECEIVEDFRAMECOUNT:
-+ if ( co->haveMulticastReceivedFrameCount ) found = TRUE; break;
-+ case DOT11FCSERRORCOUNT:
-+ if ( co->haveFCSErrorCount ) found = TRUE; break;
-+ case DOT11TRANSMITTEDFRAMECOUNT:
-+ if ( co->haveTransmittedFrameCount ) found = TRUE; break;
-+ case DOT11WEPUNDECRYPTABLECOUNT:
-+ if ( co->haveWEPUndecryptableCount ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid ));
-+ *length = vp->namelen + 1;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11TRANSMITTEDFRAGMENTCOUNT: return ( UCHAR * ) &co->transmittedFragmentCount;
-+ case DOT11MULTICASTTRANSMITTEDFRAMECOUNT: return ( UCHAR * ) &co->transmittedFrameCount;
-+ case DOT11FAILEDCOUNT: return ( UCHAR * ) &co->failedCount;
-+ case DOT11RETRYCOUNT: return ( UCHAR * ) &co->retryCount;
-+ case DOT11MULTIPLERETRYCOUNT: return ( UCHAR * ) &co->multipleRetryCount;
-+ case DOT11FRAMEDUPLICATECOUNT: return ( UCHAR * ) &co->frameDuplicateCount;
-+ case DOT11RTSSUCCESSCOUNT: return ( UCHAR * ) &co->RTSSuccessCount;
-+ case DOT11RTSFAILURECOUNT: return ( UCHAR * ) &co->RTSFailureCount;
-+ case DOT11ACKFAILURECOUNT: return ( UCHAR * ) &co->ACKFailureCount;
-+ case DOT11RECEIVEDFRAGMENTCOUNT: return ( UCHAR * ) &co->receivedFragmentCount;
-+ case DOT11MULTICASTRECEIVEDFRAMECOUNT: return ( UCHAR * ) &co->multicastReceivedFrameCount;
-+ case DOT11FCSERRORCOUNT: return ( UCHAR * ) &co->FCSErrorCount;
-+ case DOT11TRANSMITTEDFRAMECOUNT: return ( UCHAR * ) &co->transmittedFrameCount;
-+ case DOT11WEPUNDECRYPTABLECOUNT: return ( UCHAR * ) &co->WEPUndecryptableCount;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11GroupAddressesTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11GroupAddressesTable(struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method)
-+{
-+ static char MACWork[17];
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &gaList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ ga = ( struct gaTbl_data * ) np->data;
-+ rName[vp->namelen + 0] = ga->ifIndex;
-+ rName[vp->namelen + 1] = ga->groupAddressesIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11ADDRESS:
-+ if ( ga->haveAddress ) found = TRUE; break;
-+ case DOT11GROUPADDRESSESSTATUS:
-+ if ( ga->haveGroupAddressesStatus ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid ));
-+ *length = vp->namelen + 2;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11ADDRESS:
-+// *write_method = write_dot11Address;
-+ MACWork[ 0] = ga->address[ 0];
-+ MACWork[ 1] = ga->address[ 1];
-+ MACWork[ 2] = ga->address[ 3];
-+ MACWork[ 3] = ga->address[ 4];
-+ MACWork[ 4] = ga->address[ 6];
-+ MACWork[ 5] = ga->address[ 7];
-+ MACWork[ 6] = ga->address[ 9];
-+ MACWork[ 7] = ga->address[10];
-+ MACWork[ 8] = ga->address[12];
-+ MACWork[ 9] = ga->address[13];
-+ MACWork[10] = ga->address[15];
-+ MACWork[11] = ga->address[16];
-+ MACWork[12] = '\0';
-+ *var_len = 6;
-+ return ( UCHAR * ) htob ( MACWork );
-+
-+ case DOT11GROUPADDRESSESSTATUS:
-+// *write_method = write_dot11GroupAddressesStatus;
-+ return ( UCHAR * ) &ga->groupAddressesStatus;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11ResourceInfoTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11ResourceInfoTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &riList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ ri = ( struct riTbl_data * ) np->data;
-+ rName[vp->namelen] = ri->ifIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11MANUFACTUREROUI:
-+ if ( ri->haveManufacturerOUI ) found = TRUE; break;
-+ case DOT11MANUFACTURERNAME:
-+ if ( ri->haveManufacturerName ) found = TRUE; break;
-+ case DOT11MANUFACTURERPRODUCTNAME:
-+ if ( ri->haveManufacturerProductName ) found = TRUE; break;
-+ case DOT11MANUFACTURERPRODUCTVERSION:
-+ if ( ri->haveManufacturerProductVersion ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid ));
-+ *length = vp->namelen + 1;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11MANUFACTUREROUI:
-+ *var_len = strlen ( ri->manufacturerOUI );
-+ return ( UCHAR * ) ri->manufacturerOUI;
-+
-+ case DOT11MANUFACTURERNAME:
-+ *var_len = strlen ( ri->manufacturerName );
-+ return ( UCHAR * ) ri->manufacturerName;
-+
-+ case DOT11MANUFACTURERPRODUCTNAME:
-+ *var_len = strlen ( ri->manufacturerProductName );
-+ return ( UCHAR * ) ri->manufacturerProductName;
-+
-+ case DOT11MANUFACTURERPRODUCTVERSION:
-+ *var_len = strlen ( ri->manufacturerProductVersion );
-+ return ( UCHAR * ) ri->manufacturerProductVersion;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11PhyOperationTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11PhyOperationTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &poList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ po = ( struct poTbl_data * ) np->data;
-+ rName[vp->namelen] = po->ifIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11PHYTYPE:
-+ if ( po->havePHYType ) found = TRUE; break;
-+ case DOT11CURRENTREGDOMAIN:
-+ if ( po->haveCurrentRegDomain ) found = TRUE; break;
-+ case DOT11TEMPTYPE:
-+ if ( po->haveTempType ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid ));
-+ *length = vp->namelen + 1;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11PHYTYPE:
-+ return ( UCHAR * ) &po->PHYType;
-+
-+ case DOT11CURRENTREGDOMAIN:
-+// *write_method = write_dot11CurrentRegDomain;
-+ return ( UCHAR * ) &po->currentRegDomain;
-+
-+ case DOT11TEMPTYPE:
-+ return ( UCHAR * ) &po->tempType;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11PhyAntennaTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11PhyAntennaTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &paList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ pa = ( struct paTbl_data * ) np->data;
-+ rName[vp->namelen] = pa->ifIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11CURRENTTXANTENNA:
-+ if ( pa->haveCurrentTxAntenna ) found = TRUE; break;
-+ case DOT11DIVERSITYSUPPORT:
-+ if ( pa->haveDiversitySupport ) found = TRUE; break;
-+ case DOT11CURRENTRXANTENNA:
-+ if ( pa->haveCurrentRxAntenna ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid ));
-+ *length = vp->namelen + 1;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11CURRENTTXANTENNA:
-+// *write_method = write_dot11CurrentTxAntenna;
-+ return ( UCHAR * ) &pa->currentTxAntenna;
-+
-+ case DOT11DIVERSITYSUPPORT:
-+ return ( UCHAR * ) &pa->diversitySupport;
-+
-+ case DOT11CURRENTRXANTENNA:
-+// *write_method = write_dot11CurrentRxAntenna;
-+ return ( UCHAR * ) &pa->currentRxAntenna;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11PhyTxPowerTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11PhyTxPowerTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &ptList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ pt = ( struct ptTbl_data * ) np->data;
-+ rName[vp->namelen] = pt->ifIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11NUMBERSUPPORTEDPOWERLEVELS:
-+ if ( pt->haveNumberSupportedPowerLevels ) found = TRUE; break;
-+ case DOT11TXPOWERLEVEL1:
-+ if ( pt->haveTxPowerLevel1 ) found = TRUE; break;
-+ case DOT11TXPOWERLEVEL2:
-+ if ( pt->haveTxPowerLevel2 ) found = TRUE; break;
-+ case DOT11TXPOWERLEVEL3:
-+ if ( pt->haveTxPowerLevel3 ) found = TRUE; break;
-+ case DOT11TXPOWERLEVEL4:
-+ if ( pt->haveTxPowerLevel4 ) found = TRUE; break;
-+ case DOT11TXPOWERLEVEL5:
-+ if ( pt->haveTxPowerLevel5 ) found = TRUE; break;
-+ case DOT11TXPOWERLEVEL6:
-+ if ( pt->haveTxPowerLevel6 ) found = TRUE; break;
-+ case DOT11TXPOWERLEVEL7:
-+ if ( pt->haveTxPowerLevel7 ) found = TRUE; break;
-+ case DOT11TXPOWERLEVEL8:
-+ if ( pt->haveTxPowerLevel8 ) found = TRUE; break;
-+ case DOT11CURRENTTXPOWERLEVEL:
-+ if ( pt->currentTxPowerLevel ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid ));
-+ *length = vp->namelen + 1;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11NUMBERSUPPORTEDPOWERLEVELS:
-+ return ( UCHAR * ) &pt->numberSupportedPowerLevels;
-+
-+ case DOT11TXPOWERLEVEL1: return ( UCHAR * ) &pt->TxPowerLevel1;
-+ case DOT11TXPOWERLEVEL2: return ( UCHAR * ) &pt->TxPowerLevel2;
-+ case DOT11TXPOWERLEVEL3: return ( UCHAR * ) &pt->TxPowerLevel3;
-+ case DOT11TXPOWERLEVEL4: return ( UCHAR * ) &pt->TxPowerLevel4;
-+ case DOT11TXPOWERLEVEL5: return ( UCHAR * ) &pt->TxPowerLevel5;
-+ case DOT11TXPOWERLEVEL6: return ( UCHAR * ) &pt->TxPowerLevel6;
-+ case DOT11TXPOWERLEVEL7: return ( UCHAR * ) &pt->TxPowerLevel7;
-+ case DOT11TXPOWERLEVEL8: return ( UCHAR * ) &pt->TxPowerLevel8;
-+
-+ case DOT11CURRENTTXPOWERLEVEL:
-+// *write_method = write_dot11CurrentTxPowerLevel;
-+ return ( UCHAR * ) &pt->currentTxPowerLevel;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11PhyFHSSTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11PhyFHSSTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &pfList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ pf = ( struct pfTbl_data * ) np->data;
-+ rName[vp->namelen] = pf->ifIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11HOPTIME:
-+ if ( pf->haveHopTime ) found = TRUE; break;
-+ case DOT11CURRENTCHANNELNUMBER:
-+ if ( pf->haveCurrentChannelNumber ) found = TRUE; break;
-+ case DOT11MAXDWELLTIME:
-+ if ( pf->haveMaxDwellTime ) found = TRUE; break;
-+ case DOT11CURRENTDWELLTIME:
-+ if ( pf->haveCurrentDwellTime ) found = TRUE; break;
-+ case DOT11CURRENTSET:
-+ if ( pf->haveCurrentSet ) found = TRUE; break;
-+ case DOT11CURRENTPATTERN:
-+ if ( pf->haveCurrentPattern ) found = TRUE; break;
-+ case DOT11CURRENTINDEX:
-+ if ( pf->haveCurrentIndex ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid ));
-+ *length = vp->namelen + 1;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11HOPTIME:
-+ return ( UCHAR * ) &pf->hopTime;
-+
-+ case DOT11CURRENTCHANNELNUMBER:
-+// *write_method = write_dot11CurrentChannelNumber;
-+ return ( UCHAR * ) &pf->currentChannelNumber;
-+
-+ case DOT11MAXDWELLTIME:
-+ return ( UCHAR * ) &pf->maxDwellTime;
-+
-+ case DOT11CURRENTDWELLTIME:
-+// *write_method = write_dot11CurrentDwellTime;
-+ return ( UCHAR * ) &pf->currentDwellTime;
-+
-+ case DOT11CURRENTSET:
-+// *write_method = write_dot11CurrentSet;
-+ return ( UCHAR * ) &pf->currentSet;
-+
-+ case DOT11CURRENTPATTERN:
-+// *write_method = write_dot11CurrentPattern;
-+ return ( UCHAR * ) &pf->currentPattern;
-+
-+ case DOT11CURRENTINDEX:
-+// *write_method = write_dot11CurrentIndex;
-+ return ( UCHAR * ) &pf->currentIndex;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11PhyDSSSTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11PhyDSSSTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &pdList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ pd = ( struct pdTbl_data * ) np->data;
-+ rName[vp->namelen] = pd->ifIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11CURRENTCHANNEL:
-+ if ( pd->haveCurrentChannel ) found = TRUE; break;
-+ case DOT11CCAMODESUPPORTED:
-+ if ( pd->haveCCAModeSupported ) found = TRUE; break;
-+ case DOT11CURRENTCCAMODE:
-+ if ( pd->haveCurrentCCAMode ) found = TRUE; break;
-+ case DOT11EDTHRESHOLD:
-+ if ( pd->haveEDThreshold ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid ));
-+ *length = vp->namelen + 1;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11CURRENTCHANNEL:
-+// *write_method = write_dot11CurrentChannel;
-+ return ( UCHAR * ) &pd->currentChannel;
-+
-+ case DOT11CCAMODESUPPORTED:
-+ return ( UCHAR * ) &pd->CCAModeSupported;
-+
-+ case DOT11CURRENTCCAMODE:
-+// *write_method = write_dot11CurrentCCAMode;
-+ return ( UCHAR * ) &pd->currentCCAMode;
-+
-+ case DOT11EDTHRESHOLD:
-+// *write_method = write_dot11EDThreshold;
-+ return ( UCHAR * ) &pd->EDThreshold;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11PhyIRTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11PhyIRTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method)
-+{
-+
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &piList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ pi = ( struct piTbl_data * ) np->data;
-+ rName[vp->namelen] = pi->ifIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11CCAWATCHDOGTIMERMAX:
-+ if ( pi->CCAWatchdogTimerMax ) found = TRUE; break;
-+ case DOT11CCAWATCHDOGCOUNTMAX:
-+ if ( pi->CCAWatchdogCountMax ) found = TRUE; break;
-+ case DOT11CCAWATCHDOGTIMERMIN:
-+ if ( pi->CCAWatchdogTimerMin ) found = TRUE; break;
-+ case DOT11CCAWATCHDOGCOUNTMIN:
-+ if ( pi->CCAWatchdogCountMin ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid ));
-+ *length = vp->namelen + 1;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11CCAWATCHDOGTIMERMAX:
-+// *write_method = write_dot11CCAWatchdogTimerMax;
-+ return ( UCHAR * ) &pi->CCAWatchdogTimerMax;
-+
-+ case DOT11CCAWATCHDOGCOUNTMAX:
-+// *write_method = write_dot11CCAWatchdogCountMax;
-+ return ( UCHAR * ) &pi->CCAWatchdogCountMax;
-+
-+ case DOT11CCAWATCHDOGTIMERMIN:
-+// *write_method = write_dot11CCAWatchdogTimerMin;
-+ return ( UCHAR * ) &pi->CCAWatchdogTimerMin;
-+
-+ case DOT11CCAWATCHDOGCOUNTMIN:
-+// *write_method = write_dot11CCAWatchdogCountMin;
-+ return ( UCHAR * ) &pi->CCAWatchdogCountMin;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11RegDomainsSupportedTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11RegDomainsSupportedTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method)
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &rdList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ rd = ( struct rdTbl_data * ) np->data;
-+ rName[vp->namelen + 0] = rd->ifIndex;
-+ rName[vp->namelen + 1] = rd->regDomainsSupportIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11REGDOMAINSSUPPORTVALUE:
-+ if ( rd->haveRegDomainsSupportValue ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid ));
-+ *length = vp->namelen + 2;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11REGDOMAINSSUPPORTVALUE:
-+ return ( UCHAR * ) &rd->regDomainsSupportValue;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11AntennasListTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11AntennasListTable(struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method)
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &alList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ al = ( struct alTbl_data * ) np->data;
-+ rName[vp->namelen + 0] = al->ifIndex;
-+ rName[vp->namelen + 1] = al->antennaListIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11SUPPORTEDTXANTENNA:
-+ if ( al->haveSupportedTxAntenna ) found = TRUE; break;
-+ case DOT11SUPPORTEDRXANTENNA:
-+ if ( al->haveSupportedRxAntenna ) found = TRUE; break;
-+ case DOT11DIVERSITYSELECTIONRX:
-+ if ( al->haveDiversitySelectionRx ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid ));
-+ *length = vp->namelen + 2;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11SUPPORTEDTXANTENNA:
-+// *write_method = write_dot11SupportedTxAntenna;
-+ return ( UCHAR * ) &al->supportedTxAntenna;
-+
-+ case DOT11SUPPORTEDRXANTENNA:
-+// *write_method = write_dot11SupportedRxAntenna;
-+ return ( UCHAR * ) &al->supportedRxAntenna;
-+
-+ case DOT11DIVERSITYSELECTIONRX:
-+// *write_method = write_dot11DiversitySelectionRx;
-+ return ( UCHAR * ) &al->diversitySelectionRx;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11SupportedDataRatesTxTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11SupportedDataRatesTxTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &rtList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ rt = ( struct rtTbl_data * ) np->data;
-+ rName[vp->namelen + 0] = rt->ifIndex;
-+ rName[vp->namelen + 1] = rt->supportedDataRatesTxIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11SUPPORTEDDATARATESTXVALUE:
-+ if ( rt->haveSupportedDataRatesTxValue ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid ));
-+ *length = vp->namelen + 2;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11SUPPORTEDDATARATESTXVALUE:
-+ return ( UCHAR * ) &rt->supportedDataRatesTxValue;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+* var_dot11SupportedDataRatesRxTable() - *
-+* *
-+****************************************************************************/
-+unsigned char *
-+var_dot11SupportedDataRatesRxTable ( struct variable *vp,
-+ oid *name,
-+ size_t *length,
-+ int exact,
-+ size_t *var_len,
-+ WriteMethod **write_method )
-+{
-+ int found = FALSE;
-+ oid rName [ MAX_OID_LEN ]; // OID to be returned
-+
-+ loadTables();
-+ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid ));
-+ for ( np = LIST_FIRST ( &rrList ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ rr = ( struct rrTbl_data * ) np->data;
-+ rName[vp->namelen + 0] = rr->ifIndex;
-+ rName[vp->namelen + 1] = rr->supportedDataRatesRxIndex;
-+ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) ||
-+ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) {
-+ switch ( vp->magic ) {
-+ case DOT11SUPPORTEDDATARATESRXVALUE:
-+ if ( rr->haveSupportedDataRatesRxValue ) found = TRUE; break;
-+ }
-+ }
-+ if ( found )
-+ break;
-+ }
-+
-+ if ( !found )
-+ return NULL;
-+
-+ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid ));
-+ *length = vp->namelen + 2;
-+ *var_len = sizeof ( long );
-+ *write_method = NULL;
-+
-+ switch ( vp->magic ) {
-+
-+ case DOT11SUPPORTEDDATARATESRXVALUE:
-+ return ( UCHAR * ) &rr->supportedDataRatesRxValue;
-+
-+ default:
-+ ERROR_MSG ( "" );
-+ }
-+
-+ return NULL;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11StationID(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static unsigned char string[SPRINT_MAX_LEN];
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_OCTET_STR ) {
-+ fprintf ( stderr, "write to dot11StationID not ASN_OCTET_STR\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( string )) {
-+ fprintf ( stderr,"write to dot11StationID: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11MediumOccupancyLimit(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11MediumOccupancyLimit not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11MediumOccupancyLimit: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CFPPeriod(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CFPPeriod not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CFPPeriod: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CFPMaxDuration(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CFPMaxDuration not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CFPMaxDuration: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11AuthenticationResponseTimeOut(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11AuthenticationResponseTimeOut not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11AuthenticationResponseTimeOut: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11PowerManagementMode(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11PowerManagementMode not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )) {
-+ fprintf ( stderr, "write to dot11PowerManagementMode: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11DesiredSSID(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static unsigned char string[SPRINT_MAX_LEN];
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_OCTET_STR ) {
-+ fprintf ( stderr, "write to dot11DesiredSSID not ASN_OCTET_STR\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( string )){
-+ fprintf ( stderr, "write to dot11DesiredSSID: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11DesiredBSSType(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11DesiredBSSType not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11DesiredBSSType: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11OperationalRateSet(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static unsigned char string[SPRINT_MAX_LEN];
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_OCTET_STR ) {
-+ fprintf ( stderr, "write to dot11OperationalRateSet not ASN_OCTET_STR\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( string )){
-+ fprintf ( stderr, "write to dot11OperationalRateSet: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11BeaconPeriod(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11BeaconPeriod not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11BeaconPeriod: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11DTIMPeriod(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11DTIMPeriod not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11DTIMPeriod: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11AssociationResponseTimeOut(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11AssociationResponseTimeOut not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )) {
-+ fprintf ( stderr,"write to dot11AssociationResponseTimeOut: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11AuthenticationAlgorithmsEnable(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11AuthenticationAlgorithmsEnable not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11AuthenticationAlgorithmsEnable: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11WEPDefaultKeyValue(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static unsigned char string[SPRINT_MAX_LEN];
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_OCTET_STR ) {
-+ fprintf ( stderr, "write to dot11WEPDefaultKeyValue not ASN_OCTET_STR\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( string )){
-+ fprintf ( stderr,"write to dot11WEPDefaultKeyValue: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11WEPKeyMappingAddress(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static unsigned char string[SPRINT_MAX_LEN];
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_OCTET_STR ) {
-+ fprintf ( stderr, "write to dot11WEPKeyMappingAddress not ASN_OCTET_STR\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( string )) {
-+ fprintf ( stderr,"write to dot11WEPKeyMappingAddress: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11WEPKeyMappingWEPOn(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11WEPKeyMappingWEPOn not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11WEPKeyMappingWEPOn: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11WEPKeyMappingValue(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static unsigned char string[SPRINT_MAX_LEN];
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_OCTET_STR ) {
-+ fprintf ( stderr, "write to dot11WEPKeyMappingValue not ASN_OCTET_STR\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( string )) {
-+ fprintf ( stderr, "write to dot11WEPKeyMappingValue: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11WEPKeyMappingStatus(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11WEPKeyMappingStatus not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11WEPKeyMappingStatus: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11PrivacyInvoked(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11PrivacyInvoked not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11PrivacyInvoked: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11WEPDefaultKeyID(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11WEPDefaultKeyID not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11WEPDefaultKeyID: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11WEPKeyMappingLength(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11WEPKeyMappingLength not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11WEPKeyMappingLength: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11ExcludeUnencrypted(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11ExcludeUnencrypted not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11ExcludeUnencrypted: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11RTSThreshold(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ){
-+ fprintf ( stderr, "write to dot11RTSThreshold not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11RTSThreshold: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11ShortRetryLimit(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11ShortRetryLimit not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11ShortRetryLimit: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11LongRetryLimit(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11LongRetryLimit not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11LongRetryLimit: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11FragmentationThreshold(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11FragmentationThreshold not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11FragmentationThreshold: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11MaxTransmitMSDULifetime(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11MaxTransmitMSDULifetime not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11MaxTransmitMSDULifetime: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11MaxReceiveLifetime(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11MaxReceiveLifetime not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11MaxReceiveLifetime: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11Address(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static unsigned char string[SPRINT_MAX_LEN];
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_OCTET_STR ) {
-+ fprintf ( stderr, "write to dot11Address not ASN_OCTET_STR\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( string )){
-+ fprintf ( stderr, "write to dot11Address: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11GroupAddressesStatus(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11GroupAddressesStatus not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11GroupAddressesStatus: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CurrentRegDomain(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CurrentRegDomain not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CurrentRegDomain: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CurrentTxAntenna(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CurrentTxAntenna not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CurrentTxAntenna: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CurrentRxAntenna(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CurrentRxAntenna not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11CurrentRxAntenna: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CurrentTxPowerLevel(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CurrentTxPowerLevel not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CurrentTxPowerLevel: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CurrentChannelNumber(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CurrentChannelNumber not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11CurrentChannelNumber: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CurrentDwellTime(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CurrentDwellTime not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CurrentDwellTime: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CurrentSet(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CurrentSet not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CurrentSet: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CurrentPattern(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CurrentPattern not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CurrentPattern: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CurrentIndex(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CurrentIndex not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CurrentIndex: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CurrentChannel(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CurrentChannel not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CurrentChannel: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CurrentCCAMode(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CurrentCCAMode not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11CurrentCCAMode: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11EDThreshold(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11EDThreshold not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11EDThreshold: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CCAWatchdogTimerMax(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CCAWatchdogTimerMax not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CCAWatchdogTimerMax: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CCAWatchdogCountMax(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CCAWatchdogCountMax not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CCAWatchdogCountMax: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CCAWatchdogTimerMin(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CCAWatchdogTimerMin not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CCAWatchdogTimerMin: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11CCAWatchdogCountMin(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11CCAWatchdogCountMin not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11CCAWatchdogCountMin: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11SupportedTxAntenna(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11SupportedTxAntenna not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11SupportedTxAntenna: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11SupportedRxAntenna(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11SupportedRxAntenna not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr,"write to dot11SupportedRxAntenna: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+int
-+write_dot11DiversitySelectionRx(int action,
-+ u_char *var_val,
-+ u_char var_val_type,
-+ size_t var_val_len,
-+ u_char *statP,
-+ oid *name,
-+ size_t name_len)
-+{
-+ static long *long_ret;
-+ int size;
-+
-+ switch ( action ) {
-+
-+ case RESERVE1:
-+ if ( var_val_type != ASN_INTEGER ) {
-+ fprintf ( stderr, "write to dot11DiversitySelectionRx not ASN_INTEGER\n" );
-+ return SNMP_ERR_WRONGTYPE;
-+ }
-+ if ( var_val_len > sizeof ( long_ret )){
-+ fprintf ( stderr, "write to dot11DiversitySelectionRx: bad length\n" );
-+ return SNMP_ERR_WRONGLENGTH;
-+ }
-+ break;
-+
-+ case RESERVE2:
-+ case FREE:
-+ case ACTION:
-+ case UNDO:
-+ break;
-+
-+ case COMMIT:
-+ break;
-+ }
-+
-+ return SNMP_ERR_NOERROR;
-+}
-+
-+/****************************************************************************
-+* *
-+* loadTables() - Load the Tables *
-+* *
-+****************************************************************************/
-+static void loadTables()
-+{
-+ int skfd; // generic raw socket desc
-+ struct iwreq wrq; // ioctl request structure
-+ struct ifreq ifr;
-+ struct timeval et; // elapsed time
-+ struct wireless_info info; // workarea for wireless ioctl information
-+ FILE *fp;
-+ char bfr[1024], ifName[1024];
-+ char *s, *t;
-+
-+ gettimeofday ( &et, ( struct timezone * ) 0 ); // get time-of-day
-+ if ( et.tv_sec < lastLoad + MINLOADFREQ ) // only reload so often
-+ return;
-+ lastLoad = et.tv_sec;
-+
-+ skfd = openSocket(); // open socket
-+ if ( skfd < 0 ) {
-+ syslog ( LOG_ERR, "SNMP ieee802dot11.loadTables() - %s\n", "socket open failure" );
-+ return;
-+ }
-+
-+ flushLists();
-+
-+ // find interfaces in /proc/net/dev and find the wireless interfaces
-+ fp = fopen ( PROC_NET_DEV, "r" );
-+ if ( fp ) {
-+ while ( fgets ( bfr, sizeof ( bfr ), fp )) {
-+ if ( strstr ( bfr, ":" )) {
-+ s = bfr; t = ifName;
-+ while ( isspace ( *s )) // discard white space
-+ *s++;
-+ while ( *s != ':' ) // get interface name
-+ *t++ = *s++;
-+ *t = '\0';
-+
-+ // verify as a wireless device
-+ memset (( char * ) &info, 0, sizeof ( struct wireless_info ));
-+ strncpy ( wrq.ifr_name, ifName, IFNAMSIZ );
-+ if ( ioctl ( skfd, SIOCGIWNAME, &wrq ) >= 0 ) {
-+ printf ( "%s ifName: %s\n", "loadTables() -", ifName );
-+ initStructs();
-+ loadWiExt( skfd, ifName, &info );
-+ displayWiExt ( info );
-+ load80211Structs ( skfd, ifName, &info );
-+ }
-+ }
-+ }
-+ fclose ( fp );
-+ }
-+
-+ close ( skfd );
-+}
-+
-+/****************************************************************************
-+* *
-+* load80211Structs() - load the 802.11 structures *
-+* *
-+****************************************************************************/
-+static void
-+load80211Structs ( int skfd, char *ifName, struct wireless_info *wi )
-+{
-+ int rc, ifIndex = 0;
-+ struct ifreq ifr;
-+ char MACAddress [ MACADDR_LEN + 1 ];
-+
-+ strcpy ( ifr.ifr_name, ifName );
-+ rc = ioctl ( skfd, SIOCGIFHWADDR, &ifr );
-+ if ( rc >= 0 ) {
-+
-+ sprintf ( MACAddress, "%02X:%02X:%02X:%02X:%02X:%02X\0",
-+ ( UCHAR ) ifr.ifr_hwaddr.sa_data[0], ( UCHAR ) ifr.ifr_hwaddr.sa_data[1],
-+ ( UCHAR ) ifr.ifr_hwaddr.sa_data[2], ( UCHAR ) ifr.ifr_hwaddr.sa_data[3],
-+ ( UCHAR ) ifr.ifr_hwaddr.sa_data[4], ( UCHAR ) ifr.ifr_hwaddr.sa_data[5] );
-+
-+ nSc.haveStationID = TRUE;
-+ strcpy ( nSc.stationID, MACAddress );
-+ nOp.haveMACAddress = TRUE;
-+ strcpy ( nOp.MACAddress, MACAddress );
-+ nRi.haveManufacturerOUI = TRUE;
-+ strncpy ( nRi.manufacturerOUI, MACAddress, MAN_OUI_LEN );
-+
-+ ifIndex = if_nametoindex ( ifName );
-+ if ( !ifIndex ) {
-+ syslog ( LOG_ERR, "SNMP %s - %s %s\n",
-+ "ieee802dot11.load80211Structs()", ifName, "has no ifIndex" );
-+ return;
-+ }
-+
-+ loadWiExtTo80211Structs ( ifIndex, ifName, wi );
-+
-+ if ( hasChanged (( char * ) &nSc, sizeof ( nSc ))) {
-+ nSc.ifIndex = ifIndex;
-+ sprintf ( nSc.UID, "%04d\0", nSc.ifIndex );
-+ strcpy ( nSc.ifName, ifName );
-+ addList (( char * ) &scList, ( char * ) &nSc, sizeof ( nSc ));
-+ }
-+
-+ if ( hasChanged (( char * ) &nPr, sizeof ( nPr ))) {
-+ nPr.ifIndex = ifIndex;
-+ sprintf ( nPr.UID, "%04d\0", nPr.ifIndex );
-+ strcpy ( nPr.ifName, ifName );
-+ addList (( char * ) &prList, ( char * ) &nPr, sizeof ( nPr ));
-+ }
-+
-+ if ( hasChanged (( char * ) &nOp, sizeof ( nOp ))) {
-+ nOp.ifIndex = ifIndex;
-+ sprintf ( nOp.UID, "%04d\0", nOp.ifIndex );
-+ strcpy ( nOp.ifName, ifName );
-+ addList (( char * ) &opList, ( char * ) &nOp, sizeof ( nOp ));
-+ }
-+
-+ if ( hasChanged (( char * ) &nCo, sizeof ( nCo ))) {
-+ nCo.ifIndex = ifIndex;
-+ sprintf ( nCo.UID, "%04d\0", nCo.ifIndex );
-+ strcpy ( nCo.ifName, ifName );
-+ addList (( char * ) &coList, ( char * ) &nCo, sizeof ( nCo ));
-+ }
-+
-+ if ( hasChanged (( char * ) &nRi, sizeof ( nRi ))) {
-+ nRi.ifIndex = ifIndex;
-+ sprintf ( nRi.UID, "%04d\0", nRi.ifIndex );
-+ strcpy ( nRi.ifName, ifName );
-+ addList (( char * ) &riList, ( char * ) &nRi, sizeof ( nRi ));
-+ }
-+
-+ if ( hasChanged (( char * ) &nPo, sizeof ( nPo ))) {
-+ nPo.ifIndex = ifIndex;
-+ sprintf ( nPo.UID, "%04d\0", nPo.ifIndex );
-+ strcpy ( nPo.ifName, ifName );
-+ addList (( char * ) &poList, ( char * ) &nPo, sizeof ( nPo ));
-+ }
-+
-+ if ( hasChanged (( char * ) &nPa, sizeof ( nPa ))) {
-+ nPa.ifIndex = ifIndex;
-+ sprintf ( nPa.UID, "%04d\0", nPa.ifIndex );
-+ strcpy ( nPa.ifName, ifName );
-+ addList (( char * ) &paList, ( char * ) &nPa, sizeof ( nPa ));
-+ }
-+
-+ if ( hasChanged (( char * ) &nPt, sizeof ( nPt ))) {
-+ nPt.ifIndex = ifIndex;
-+ sprintf ( nPt.UID, "%04d\0", nPt.ifIndex );
-+ strcpy ( nPt.ifName, ifName );
-+ addList (( char * ) &ptList, ( char * ) &nPt, sizeof ( nPt ));
-+ }
-+
-+ if ( hasChanged (( char * ) &nPf, sizeof ( nPf ))) {
-+ nPf.ifIndex = ifIndex;
-+ sprintf ( nPf.UID, "%04d\0", nPf.ifIndex );
-+ strcpy ( nPf.ifName, ifName );
-+ addList (( char * ) &pfList, ( char * ) &nPf, sizeof ( nPf ));
-+ }
-+
-+ if ( hasChanged (( char * ) &nPd, sizeof ( nPd ))) {
-+ nPd.ifIndex = ifIndex;
-+ sprintf ( nPd.UID, "%04d\0", nPd.ifIndex );
-+ strcpy ( nPd.ifName, ifName );
-+ addList (( char * ) &pdList, ( char * ) &nPd, sizeof ( nPd ));
-+ }
-+
-+ if ( hasChanged (( char * ) &nPi, sizeof ( nPi ))) {
-+ nPi.ifIndex = ifIndex;
-+ sprintf ( nPi.UID, "%04d\0", nPi.ifIndex );
-+ strcpy ( nPi.ifName, ifName );
-+ addList (( char * ) &piList, ( char * ) &nPi, sizeof ( nPi ));
-+ }
-+ }
-+
-+//printf ( "%s - ifIndex: %d ifName: %s UID: %s\n",
-+// "load80211Structs() - HASCHANGED", ifIndex, ifName, nSc.UID );
-+}
-+
-+/****************************************************************************
-+* *
-+* initStructs() - initialize structures *
-+* *
-+****************************************************************************/
-+static void initStructs()
-+{
-+ int i;
-+
-+ // 802.11 MIB Stuctures
-+ memset (( char * ) &nSc, 0, sizeof ( nSc )); memset (( char * ) &nAa, 0, sizeof ( nAa ));
-+ memset (( char * ) &nDf, 0, sizeof ( nDf )); memset (( char * ) &nKm, 0, sizeof ( nKm ));
-+ memset (( char * ) &nPr, 0, sizeof ( nPr )); memset (( char * ) &nOp, 0, sizeof ( nOp ));
-+ memset (( char * ) &nCo, 0, sizeof ( nCo )); memset (( char * ) &nGa, 0, sizeof ( nGa ));
-+ memset (( char * ) &nRi, 0, sizeof ( nRi )); memset (( char * ) &nPo, 0, sizeof ( nPo ));
-+ memset (( char * ) &nPa, 0, sizeof ( nPa )); memset (( char * ) &nPt, 0, sizeof ( nPt ));
-+ memset (( char * ) &nPf, 0, sizeof ( nPf )); memset (( char * ) &nPd, 0, sizeof ( nPd ));
-+ memset (( char * ) &nPi, 0, sizeof ( nPi )); memset (( char * ) &nRd, 0, sizeof ( nRd ));
-+ memset (( char * ) &nAl, 0, sizeof ( nAl )); memset (( char * ) &nRt, 0, sizeof ( nRt ));
-+ memset (( char * ) &nRr, 0, sizeof ( nRr ));
-+
-+ // Wireless Extensions
-+ wepCurrentKey = 0;
-+ haveWepCurrentKey = FALSE;
-+ for ( i = 0; i < MAX_WEP_KEYS; i++ ) {
-+ wep[i].len = 0;
-+ wep[i].key[0] = '\0';
-+ wep[i].haveKey = FALSE;
-+ }
-+}
-+
-+/****************************************************************************
-+* *
-+* Wireless Extensions Specific Functions *
-+* *
-+****************************************************************************/
-+/****************************************************************************
-+* *
-+* loadWiExtTo80211Structs() - load wireless extensions to 802.11 structures *
-+* *
-+****************************************************************************/
-+static void
-+loadWiExtTo80211Structs ( int ifIndex, char *ifName, struct wireless_info *wi )
-+{
-+ int i, j = 0;
-+
-+ // dot11Smt Group
-+ // dot11StationConfigTable
-+ nSc.havePrivacyOptionImplemented = TRUE;
-+ nSc.privacyOptionImplemented = 1; // assume we support WEP
-+
-+ if ( wi->has_power ) {
-+ nSc.havePowerManagementMode = TRUE;
-+ nSc.powerManagementMode = 1; // assume power is active
-+ if ( !wi->power.disabled &&
-+ wi->power.flags & IW_POWER_MIN )
-+ nSc.powerManagementMode = 2; // power save mode
-+ }
-+
-+ if ( wi->has_essid && strlen ( wi->essid )) {
-+ nSc.haveDesiredSSID = TRUE;
-+ strcpy ( nSc.desiredSSID, wi->essid );
-+ }
-+
-+ if ( wi->has_mode ) {
-+ nSc.haveDesiredBSSType = TRUE;
-+ if ( wi->mode == IW_MODE_ADHOC )
-+ nSc.desiredBSSType = 2; // independent
-+ else if ( wi->has_ap_addr )
-+ nSc.desiredBSSType = 1; // infrastructure
-+ else
-+ nSc.desiredBSSType = 3; // any
-+ }
-+
-+ if ( wi->has_range ) {
-+ for ( i = 0; i < wi->range.num_bitrates && j < 126; i++ ) {
-+ nSc.haveOperationalRateSet = TRUE;
-+ nSc.operationalRateSet[j++] = ( char ) ( wi->range.bitrate[i] / 500000L );
-+ }
-+ }
-+
-+ // dot11AuthenticationAlgorithmsTable
-+ nAa.haveAuthenticationAlgorithm = TRUE; // it's a rule to always have
-+ nAa.haveAuthenticationAlgorithmsEnable = TRUE; // 'open' supported
-+ nAa.ifIndex = ifIndex;
-+ nAa.authenticationAlgorithmsIndex = 1; // index number one
-+ nAa.authenticationAlgorithm = 1; // 1 => open key
-+ sprintf ( nAa.UID, "%04d%04d\0", nAa.ifIndex, nAa.authenticationAlgorithmsIndex );
-+ nAa.authenticationAlgorithmsEnable = 1; // enabled by default
-+ if ( ( wi->has_key ) &&
-+ ( wi->key_size != 0 ) &&
-+ !( wi->key_flags & IW_ENCODE_DISABLED ))
-+ nAa.authenticationAlgorithmsEnable = 2;
-+ addList (( char * ) &aaList, ( char * ) &nAa, sizeof ( nAa ));
-+
-+ nAa.haveAuthenticationAlgorithm = TRUE; // I'm gonna assume we always support WEP
-+ nAa.haveAuthenticationAlgorithmsEnable = TRUE;
-+ nAa.ifIndex = ifIndex;
-+ nAa.authenticationAlgorithmsIndex = 2; // index number 2
-+ nAa.authenticationAlgorithm = 2; // 2 => shared key
-+ sprintf ( nAa.UID, "%04d%04d\0", nAa.ifIndex, nAa.authenticationAlgorithmsIndex );
-+ nAa.authenticationAlgorithmsEnable = 2;
-+ if ( ( wi->has_key ) &&
-+ ( wi->key_size != 0 ) &&
-+ !( wi->key_flags & IW_ENCODE_DISABLED ))
-+ nAa.authenticationAlgorithmsEnable = 1; // disabled by default
-+ addList (( char * ) &aaList, ( char * ) &nAa, sizeof ( nAa ));
-+
-+ //dot11WEPDefaultKeysTable
-+ if ( wi->has_range ) {
-+ for ( i = 0; i < MAX_WEP_KEYS; i++ ) {
-+ nDf.haveWEPDefaultKeyValue = TRUE;
-+ nDf.ifIndex = ifIndex;
-+ nDf.WEPDefaultKeyIndex = i + 1; // index number
-+ sprintf ( nDf.UID, "%04d%04d\0", nDf.ifIndex, nDf.WEPDefaultKeyIndex );
-+ if ( wep[i].haveKey )
-+ strcpy ( nDf.WEPDefaultKeyValue, "*****" );
-+ else
-+ nDf.WEPDefaultKeyValue[0] = '\0';
-+ addList (( char * ) &dfList, ( char * ) &nDf, sizeof ( nDf ));
-+ }
-+ }
-+
-+ // dot11PrivacyTable
-+ nPr.havePrivacyInvoked = TRUE;
-+ nPr.privacyInvoked = 2; // 2 => FALSE
-+ nPr.haveWEPDefaultKeyID = TRUE;
-+ nPr.WEPDefaultKeyID = 0;
-+ nPr.haveExcludeUnencrypted = TRUE;
-+ nPr.excludeUnencrypted = 2; // 2 => FALSE
-+ if ( wi->has_range ) {
-+ if ( ( wi->key_size != 0 ) &&
-+ !( wi->key_flags & IW_ENCODE_DISABLED )) {
-+ nPr.privacyInvoked = 1;
-+ if ( wi->key_flags & IW_ENCODE_RESTRICTED )
-+ nPr.excludeUnencrypted = 1;
-+ nPr.WEPDefaultKeyID = wepCurrentKey;
-+ }
-+ }
-+
-+ // dot11Mac Group
-+ // dot11OperationTable
-+ if ( wi->has_range ) {
-+ nOp.haveRTSThreshold = TRUE;
-+ nOp.RTSThreshold = wi->range.max_rts;
-+ }
-+
-+ if ( wi->has_frag && wi->frag.value ) {
-+ nOp.haveFragmentationThreshold = TRUE;
-+ nOp.fragmentationThreshold = wi->frag.value;
-+ }
-+
-+ // dot11Phy Group
-+ // dot11PhyOperationTable
-+ if ( strstr ( wi->name, "IEEE 802.11-FS" )) nPo.PHYType = 1; // So what if I
-+ if ( strstr ( wi->name, "IEEE 802.11-DS" )) nPo.PHYType = 2; // made up a couple?
-+ if ( strstr ( wi->name, "IEEE 802.11-IR" )) nPo.PHYType = 3;
-+ if ( strstr ( wi->name, "IEEE 802.11-OFDM" )) nPo.PHYType = 4; // 802.11a
-+ if ( strstr ( wi->name, "IEEE 802.11-OFDM/DS" )) nPo.PHYType = 5; // 802.11g
-+ if ( strstr ( wi->name, "IEEE 802.11-TURBO" )) nPo.PHYType = 6; // Atheros TURBO mode
-+ if ( nPo.PHYType ) nPo.havePHYType = TRUE;
-+
-+ // dot11PhyDSSSTable
-+ if ( wi->has_range ) { // && wi->freq <= ( double ) 2483000000 ) { // DSSS frequencies only
-+ for ( i = 0; i < wi->range.num_frequency; i++ ) {
-+ if ((( double ) ( wi->range.freq[i].e * 10 ) * ( double ) wi->range.freq[i].m ) == wi->freq ) {
-+ nPd.haveCurrentChannel = TRUE;
-+ nPd.currentChannel = wi->range.freq[i].i;
-+ }
-+ }
-+ }
-+
-+ // dot11SupportedDataRatesTxTable
-+ if ( wi->has_range ) {
-+ for ( i = 0; i < wi->range.num_bitrates; i++ ) {
-+ nRt.ifIndex = ifIndex;
-+ nRt.supportedDataRatesTxIndex = i + 1;
-+ nRt.supportedDataRatesTxValue = wi->range.bitrate[i] / 500000L;
-+ nRt.haveSupportedDataRatesTxValue = TRUE;
-+ sprintf ( nRt.UID, "%04d%04d\0", nRt.ifIndex, nRt.supportedDataRatesTxIndex );
-+ strcpy ( nRt.ifName, ifName );
-+ addList (( char * ) &rtList, ( char * ) &nRt, sizeof ( nRt ));
-+ }
-+ }
-+
-+ // dot11SupportedDataRatesRxTable
-+ if ( wi->has_range ) {
-+ for ( i = 0; i < wi->range.num_bitrates; i++ ) {
-+ nRr.ifIndex = ifIndex;
-+ nRr.supportedDataRatesRxIndex = i + 1;
-+ nRr.supportedDataRatesRxValue = wi->range.bitrate[i] / 500000L;
-+ nRr.haveSupportedDataRatesRxValue = TRUE;
-+ sprintf ( nRr.UID, "%04d%04d\0", nRr.ifIndex, nRr.supportedDataRatesRxIndex );
-+ strcpy ( nRr.ifName, ifName );
-+ addList (( char * ) &rrList, ( char * ) &nRr, sizeof ( nRr ));
-+ }
-+ }
-+
-+//printf ( "%s max_encoding_tokens: %d\n",
-+// "loadWiExtTo80211Structs() - ", wi->range.max_encoding_tokens );
-+}
-+
-+/****************************************************************************
-+* *
-+* loadWiExt() - load wireless extensions structures; *
-+* use ioctl calls and read /proc/net/wireless *
-+* *
-+****************************************************************************/
-+static void loadWiExt ( int skfd, char *ifname, struct wireless_info *wi )
-+{
-+ struct iwreq wrq; // ioctl request structure
-+ FILE *fp;
-+ char bfr[1024];
-+ char buffer[sizeof ( iwrange ) * 2]; /* Large enough */
-+ char *s, *t;
-+ int i, j;
-+
-+ strncpy ( wrq.ifr_name, ifname, IFNAMSIZ );
-+
-+ /* Get wireless name */
-+ if ( ioctl ( skfd, SIOCGIWNAME, &wrq ) >= 0 ) {
-+ strncpy ( wi->name, wrq.u.name, IFNAMSIZ );
-+ wi->name[IFNAMSIZ] = '\0';
-+ }
-+
-+ /* Get ranges */ // NOTE: some version checking in iwlib.c
-+ memset ( buffer, 0, sizeof ( buffer ));
-+ wrq.u.data.pointer = ( caddr_t ) &buffer;
-+ wrq.u.data.length = sizeof ( buffer );
-+ wrq.u.data.flags = 0;
-+ if ( ioctl ( skfd, SIOCGIWRANGE, &wrq ) >= 0 ) {
-+ memcpy (( char * ) &wi->range, buffer, sizeof ( iwrange ));
-+ wi->has_range = 1;
-+ }
-+
-+ /* Get network ID */
-+ if ( ioctl ( skfd, SIOCGIWNWID, &wrq ) >= 0 ) {
-+ memcpy ( &wi->nwid, &wrq.u.nwid, sizeof ( iwparam ));
-+ wi->has_nwid = 1;
-+ }
-+
-+ /* Get frequency / channel */ // THIS NUMBER LOOKS FUNNY
-+ if ( ioctl ( skfd, SIOCGIWFREQ, &wrq ) >= 0 ) {
-+ wi->has_freq = 1;
-+ wi->freq = (( double ) wrq.u.freq.m ) * pow ( 10, wrq.u.freq.e );
-+ }
-+
-+ /* Get sensitivity */
-+ if ( ioctl ( skfd, SIOCGIWSENS, &wrq ) >= 0 ) {
-+ wi->has_sens = 1;
-+ memcpy ( &wi->sens, &wrq.u.sens, sizeof ( iwparam ));
-+ }
-+
-+ /* Get encryption information */
-+ wrq.u.data.pointer = ( caddr_t ) &wi->key;
-+ wrq.u.data.length = IW_ENCODING_TOKEN_MAX;
-+ wrq.u.data.flags = 0;
-+ if ( ioctl ( skfd, SIOCGIWENCODE, &wrq ) >= 0 ) {
-+ wi->has_key = 1;
-+ wi->key_size = wrq.u.data.length;
-+ wi->key_flags = wrq.u.data.flags;
-+ wepCurrentKey = wrq.u.data.flags & IW_ENCODE_INDEX;
-+ }
-+
-+ for ( i = 0; i < wi->range.max_encoding_tokens; i++ ) {
-+ wrq.u.data.pointer = ( caddr_t ) &wi->key;
-+ wrq.u.data.length = IW_ENCODING_TOKEN_MAX;
-+ wrq.u.data.flags = i;
-+ if ( ioctl ( skfd, SIOCGIWENCODE, &wrq ) >= 0 ) {
-+ if ( ( wrq.u.data.length != 0 ) &&
-+ !( wrq.u.data.flags & IW_ENCODE_DISABLED )) {
-+ wep[i].len = wrq.u.data.length;
-+ wep[i].haveKey = TRUE;
-+ t = wep[i].key;
-+ for ( j = 0; j < wrq.u.data.length; j++ ) {
-+ if (( j & 0x1 ) == 0 && j != 0 )
-+ strcpy ( t++, "-");
-+ sprintf ( t, "%.2X", wi->key[j] );
-+ t += 2;
-+ }
-+ t = '\0';
-+ }
-+ }
-+ }
-+
-+ /* Get ESSID */
-+ wrq.u.essid.pointer = ( caddr_t ) &wi->essid;
-+ wrq.u.essid.length = IW_ESSID_MAX_SIZE + 1;
-+ wrq.u.essid.flags = 0;
-+ if ( ioctl ( skfd, SIOCGIWESSID, &wrq ) >= 0 ) {
-+ wi->has_essid = 1;
-+ wi->essid_on = wrq.u.data.flags;
-+ }
-+
-+ /* Get AP address */
-+ if ( ioctl ( skfd, SIOCGIWAP, &wrq ) >= 0 ) {
-+ wi->has_ap_addr = 1;
-+ memcpy ( &wi->ap_addr, &wrq.u.ap_addr, sizeof ( sockaddr ));
-+ }
-+
-+ /* Get NickName */
-+ wrq.u.essid.pointer = ( caddr_t ) &wi->nickname;
-+ wrq.u.essid.length = IW_ESSID_MAX_SIZE + 1;
-+ wrq.u.essid.flags = 0;
-+ if ( ioctl ( skfd, SIOCGIWNICKN, &wrq ) >= 0 ) {
-+ if ( wrq.u.data.length > 1 )
-+ wi->has_nickname = 1;
-+ }
-+
-+ /* Get bit rate */
-+ if ( ioctl ( skfd, SIOCGIWRATE, &wrq ) >= 0 ) {
-+ wi->has_bitrate = 1;
-+ memcpy ( &wi->bitrate, &wrq.u.bitrate, sizeof ( iwparam ));
-+ }
-+
-+ /* Get RTS threshold */
-+ if ( ioctl ( skfd, SIOCGIWRTS, &wrq ) >= 0 ) {
-+ wi->has_rts = 1;
-+ memcpy ( &wi->rts, &wrq.u.rts, sizeof ( iwparam ));
-+ }
-+
-+ /* Get fragmentation threshold */
-+ if ( ioctl ( skfd, SIOCGIWFRAG, &wrq ) >= 0 ) {
-+ wi->has_frag = 1;
-+ memcpy ( &wi->frag, &wrq.u.frag, sizeof ( iwparam ));
-+ }
-+
-+ /* Get operation mode */
-+ if ( ioctl ( skfd, SIOCGIWMODE, &wrq ) >= 0 ) {
-+ wi->mode = wrq.u.mode;
-+ if ( wi->mode < IW_NUM_OPER_MODE && wi->mode >= 0 )
-+ wi->has_mode = 1;
-+ }
-+
-+ /* Get Power Management settings */ // #if WIRELESS_EXT > 9
-+ wrq.u.power.flags = 0;
-+ if ( ioctl ( skfd, SIOCGIWPOWER, &wrq ) >= 0 ) {
-+ wi->has_power = 1;
-+ memcpy ( &wi->power, &wrq.u.power, sizeof ( iwparam ));
-+ }
-+
-+ /* Get retry limit/lifetime */ // #if WIRELESS_EXT > 10
-+ if ( ioctl ( skfd, SIOCGIWRETRY, &wrq ) >= 0 ) {
-+ wi->has_retry = 1;
-+ memcpy ( &wi->retry, &wrq.u.retry, sizeof ( iwparam ));
-+ }
-+
-+ /* Get stats */ // #if WIRELESS_EXT > 11
-+ wrq.u.data.pointer = ( caddr_t ) &wi->stats;
-+ wrq.u.data.length = 0;
-+ wrq.u.data.flags = 1; /* Clear updated flag */
-+ if ( ioctl ( skfd, SIOCGIWSTATS, &wrq ) < 0 )
-+ wi->has_stats = 1;
-+
-+ if ( !wi->has_stats ) { // no ioctl support, go to file
-+ fp = fopen ( PROC_NET_WIRELESS, "r" );
-+ if ( fp ) {
-+ while ( fgets ( bfr, sizeof ( bfr ), fp )) {
-+ bfr [ sizeof ( bfr ) - 1 ] = '\0'; // no buffer overruns here!
-+ strtok (( char * ) &bfr, "\n" ); // '\n' => '\0'
-+ if ( strstr ( bfr, ifname ) && strstr ( bfr, ":" )) {
-+ wi->has_stats = 1;
-+ s = bfr;
-+ s = strchr ( s, ':' ); s++; /* Skip ethX: */
-+ s = strtok ( s, " " ); /* ' ' => '\0' */
-+ sscanf ( s, "%X", &wi->stats.status ); // status
-+
-+ s = strtok ( NULL, " " ); // link quality
-+ if ( strchr ( s, '.' ) != NULL )
-+ wi->stats.qual.updated |= 1;
-+ sscanf ( s, "%d", &wi->stats.qual.qual );
-+
-+ s = strtok ( NULL, " " ); // signal level
-+ if ( strchr ( s,'.' ) != NULL )
-+ wi->stats.qual.updated |= 2;
-+ sscanf ( s, "%d", &wi->stats.qual.level );
-+
-+ s = strtok ( NULL, " " ); // noise level
-+ if ( strchr ( s, '.' ) != NULL )
-+ wi->stats.qual.updated += 4;
-+ sscanf ( s, "%d", &wi->stats.qual.noise );
-+
-+ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.discard.nwid );
-+ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.discard.code );
-+ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.discard.fragment );
-+ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.discard.retries );
-+ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.discard.misc );
-+ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.miss.beacon );
-+ }
-+ }
-+ fclose ( fp );
-+ }
-+ }
-+
-+// printf ( "%s bfr: %s\n", "loadTables()", bfr );
-+}
-+
-+/****************************************************************************
-+* *
-+* displayWiExt() - show what I got from Wireless Extensions *
-+* *
-+****************************************************************************/
-+static void displayWiExt ( struct wireless_info info )
-+{
-+#ifdef DISPLAYWIEXT
-+ int i;
-+ char title[] = "displayWiExt() -";
-+
-+ printf ( "========================================\n" );
-+ printf ( "===> Wireless Extension IOCTL calls <===\n" );
-+ printf ( "========================================\n" );
-+
-+ if ( strlen ( info.name ))
-+ printf ( "%s name: %s\n", "SIOCGIWNAME", info.name );
-+ else
-+ printf ( "%s\n", "no info.name support" );
-+
-+ if ( info.has_nickname = 1 )
-+ printf ( "%s nickname: %s\n", "SIOCGIWNICKN", info.nickname );
-+ else
-+ printf ( "%s %s\n", "SIOCGIWNICKN", " ===> no info.nickname support" );
-+
-+ if ( info.has_essid )
-+ printf ( "%s essid_on: %d essid: %s\n", "SIOCGIWESSID", info.essid_on, info.essid );
-+ else
-+ printf ( "%s %s\n", "SIOCGIWESSID", " ===> no info.essid support" );
-+
-+ if ( info.has_range ) {
-+ printf ( "%s throughput: %d\n", "SIOCGIWRANGE", info.range.throughput );
-+ printf ( "%s min_nwid: %d\n", "SIOCGIWRANGE", info.range.min_nwid );
-+ printf ( "%s max_nwid: %d\n", "SIOCGIWRANGE", info.range.max_nwid );
-+ printf ( "%s sensitivity: %d\n", "SIOCGIWRANGE", info.range.sensitivity );
-+ printf ( "%s num_bitrates: %d\n", "SIOCGIWRANGE", info.range.num_bitrates );
-+ for ( i = 0; i < info.range.num_bitrates; i++ )
-+ printf ( "%s bitrate[%d]: %d\n", "SIOCGIWRANGE", i, info.range.bitrate[i] );
-+ printf ( "%s min_rts: %d\n", "SIOCGIWRANGE", info.range.min_rts );
-+ printf ( "%s max_rts: %d\n", "SIOCGIWRANGE", info.range.max_rts );
-+ printf ( "%s min_frag: %d\n", "SIOCGIWRANGE", info.range.min_frag );
-+ printf ( "%s max_frag: %d\n", "SIOCGIWRANGE", info.range.max_frag );
-+ printf ( "%s min_pmp: %d\n", "SIOCGIWRANGE", info.range.min_pmp );
-+ printf ( "%s max_pmp: %d\n", "SIOCGIWRANGE", info.range.max_pmp );
-+ printf ( "%s min_pmt: %d\n", "SIOCGIWRANGE", info.range.min_pmt );
-+ printf ( "%s max_pmt: %d\n", "SIOCGIWRANGE", info.range.max_pmt );
-+ printf ( "%s pmp_flags: %d\n", "SIOCGIWRANGE", info.range.pmp_flags );
-+ printf ( "%s pmt_flags: %d\n", "SIOCGIWRANGE", info.range.pmt_flags );
-+ printf ( "%s pm_capa: %d\n", "SIOCGIWRANGE", info.range.pm_capa );
-+ printf ( "%s num_encoding_sizes: %d\n", "SIOCGIWRANGE", info.range.num_encoding_sizes );
-+ for ( i = 0; i < info.range.num_encoding_sizes; i++ )
-+ printf ( "%s encoding_size[%d]: %d\n", "SIOCGIWRANGE", i, info.range.encoding_size[i] );
-+ printf ( "%s max_encoding_tokens: %d\n", "SIOCGIWRANGE", info.range.max_encoding_tokens );
-+// printf ( "%s encoding_login_index: %d\n", "SIOCGIWRANGE", info.range.encoding_login_index );
-+ printf ( "%s txpower_capa: %d\n", "SIOCGIWRANGE", info.range.txpower_capa );
-+ printf ( "%s num_txpower: %d dBm\n", "SIOCGIWRANGE", info.range.num_txpower );
-+ for ( i = 0; i < info.range.num_txpower; i++ )
-+ printf ( "%s txpower[%d]: %d\n", "SIOCGIWRANGE", i, info.range.txpower[i] );
-+ printf ( "%s we_version_compiled: %d\n", "SIOCGIWRANGE", info.range.we_version_compiled );
-+ printf ( "%s we_version_source: %d\n", "SIOCGIWRANGE", info.range.we_version_source );
-+ printf ( "%s retry_capa: %d\n", "SIOCGIWRANGE", info.range.retry_capa );
-+ printf ( "%s retry_flags: %d\n", "SIOCGIWRANGE", info.range.retry_flags );
-+ printf ( "%s r_time_flags: %d\n", "SIOCGIWRANGE", info.range.r_time_flags );
-+ printf ( "%s min_retry: %d\n", "SIOCGIWRANGE", info.range.min_retry );
-+ printf ( "%s max_retry: %d\n", "SIOCGIWRANGE", info.range.max_retry );
-+ printf ( "%s min_r_time: %d\n", "SIOCGIWRANGE", info.range.min_r_time );
-+ printf ( "%s max_r_time: %d\n", "SIOCGIWRANGE", info.range.max_r_time );
-+ printf ( "%s num_channels: %d\n", "SIOCGIWRANGE", info.range.num_channels );
-+ printf ( "%s num_frequency: %d\n", "SIOCGIWRANGE", info.range.num_frequency );
-+ for ( i = 0; i < info.range.num_frequency; i++ )
-+ printf ( "%s freq[%d].i: %d freq[%d].e: %d freq[%d].m: %d\n", "SIOCGIWRANGE",
-+ i, info.range.freq[i].i, i, info.range.freq[i].e, i, info.range.freq[i].m );
-+ }
-+ else
-+ printf ( "%s %s\n", "SIOCGIWRANGE", " ===> no info.range support" );
-+
-+ if ( info.has_nwid )
-+ printf ( "%s nwid - disabled: %d value: %X\n", "SIOCGIWNWID", info.nwid.disabled, info.nwid.value );
-+ else
-+ printf ( "%s %s\n", "SIOCGIWNWID", " ===> no info.nwid support" );
-+
-+ if ( info.has_freq ) {
-+// printf ( "%s freq: %g\n", "SIOCGIWFREQ", info.freq / GIGA );
-+ printf ( "%s freq: %g\n", "SIOCGIWFREQ", info.freq );
-+ }
-+ else
-+ printf ( "%s %s\n", "SIOCGIWFREQ", " ===> no info.freq support" );
-+
-+ if ( info.has_sens )
-+ printf ( "%s sens: %d\n", "SIOCGIWSENS", info.sens );
-+ else
-+ printf ( "%s %s\n", "SIOCGIWSENS", " ===> no info.sens support" );
-+
-+ if ( info.has_key ) {
-+ printf ( "%s key_size: %d key_flags: %d wepCurrentKey: %d\n",
-+ "SIOCGIWENCODE", info.key_size, info.key_flags, wepCurrentKey );
-+ printf ( "%s MODE: %d DISABLED: %d INDEX: %d OPEN: %d RESTRICTED: %d NOKEY: %d TEMP: %d\n",
-+ "SIOCGIWENCODE", info.key_flags & IW_ENCODE_MODE,
-+ info.key_flags & IW_ENCODE_DISABLED ? 1:0, info.key_flags & IW_ENCODE_INDEX,
-+ info.key_flags & IW_ENCODE_OPEN ? 1:0, info.key_flags & IW_ENCODE_RESTRICTED ? 1:0,
-+ info.key_flags & IW_ENCODE_NOKEY ? 1:0, info.key_flags & IW_ENCODE_TEMP ? 1:0 );
-+ }
-+ else
-+ printf ( "%s %s\n", "SIOCGIWENCODE", " ===> no info.key support" );
-+
-+ for ( i = 0; i < MAX_WEP_KEYS; i++ ) {
-+ if ( wep[i].haveKey )
-+ printf ( "%s wep[%d].len: %d wep[%d].key: %s\n",
-+ "SIOCGIWENCODE", i, wep[i].len, i, wep[i].key );
-+ }
-+
-+ if ( info.has_ap_addr )
-+ printf ( "%s ap_addr.sa_data: %02X:%02X:%02X:%02X:%02X:%02X ap_addr.sa_family: %d\n",
-+ "SIOCGIWAP", ( UCHAR ) info.ap_addr.sa_data[0], ( UCHAR ) info.ap_addr.sa_data[1],
-+ ( UCHAR ) info.ap_addr.sa_data[2], ( UCHAR ) info.ap_addr.sa_data[3],
-+ ( UCHAR ) info.ap_addr.sa_data[4], ( UCHAR ) info.ap_addr.sa_data[5],
-+ info.ap_addr.sa_family );
-+ else
-+ printf ( "%s %s\n", "SIOCGIWAP", " ===> no ap_addr information" );
-+
-+ if ( info.has_bitrate )
-+ printf ( "%s bitrate: %d value: %d fixed: %d disabled: %d flags: %d\n",
-+ "SIOCGIWRATE", info.bitrate, info.bitrate.value, info.bitrate.fixed,
-+ info.bitrate.disabled, info.bitrate.flags );
-+ else
-+ printf ( "%s %s\n", "SIOCGIWRATE", " ===> no info.bitrate support" );
-+
-+ if ( info.has_rts )
-+ printf ( "%s rts: %d\n", "SIOCGIWRTS", info.rts );
-+ else
-+ printf ( "%s %s\n", "SIOCGIWRTS", " ===> no info.rts support" );
-+
-+ if ( info.has_frag )
-+ printf ( "%s frag: %d\n", "SIOCGIWFRAG", info.frag );
-+ else
-+ printf ( "%s %s\n", "SIOCGIWFRAG", " ===> no info.frag support" );
-+
-+ if ( info.has_mode )
-+ printf ( "%s mode: %d\n", "SIOCGIWMODE", info.mode );
-+ else
-+ printf ( "%s %s\n", "SIOCGIWMODE", " ===> no info.mode support" );
-+
-+ if ( info.has_power ) {
-+ printf ( "%s power: %d\n", "SIOCGIWPOWER", info.power );
-+ printf ( "%s disabled: %d MIN: %d MAX: %d TIMEOUT: %d RELATIVE: %d\n",
-+ "SIOCGIWPOWER",
-+ info.power.disabled ? 1:0,
-+ info.power.flags & IW_POWER_MIN ? 1:0,
-+ info.power.flags & IW_POWER_MAX ? 1:0,
-+ info.power.flags & IW_POWER_TIMEOUT ? 1:0,
-+ info.power.flags & IW_POWER_RELATIVE ? 1:0 );
-+ printf ( "%s UNICAST: %d MULTICAST: %d ALL: %d FORCE: %d REPEATER: %d\n",
-+ "SIOCGIWPOWER",
-+ info.power.flags & IW_POWER_UNICAST_R ? 1:0,
-+ info.power.flags & IW_POWER_MULTICAST_R ? 1:0,
-+ info.power.flags & IW_POWER_ALL_R ? 1:0,
-+ info.power.flags & IW_POWER_FORCE_S ? 1:0,
-+ info.power.flags & IW_POWER_REPEATER ? 1:0 );
-+ }
-+ else
-+ printf ( "%s %s\n", "SIOCGIWPOWER", " ===> no info.power support" );
-+
-+ if ( info.has_retry )
-+ printf ( "%s retry: %d\n", "SIOCGIWRETRY", info.retry );
-+ else
-+ printf ( "%s %s\n", "SIOCGIWRETRY", " ===> no info.retry support" );
-+
-+ if ( info.has_stats ) {
-+ printf ( "%s status: %d\n", "SIOCGIWSTATS", info.stats.status );
-+ printf ( "%s qual.level: %d\n", "SIOCGIWSTATS", info.stats.qual.level );
-+ printf ( "%s qual.noise: %d\n", "SIOCGIWSTATS", info.stats.qual.noise );
-+ printf ( "%s qual.qual: %d\n", "SIOCGIWSTATS", info.stats.qual.qual );
-+ printf ( "%s qual.updated: %d\n", "SIOCGIWSTATS", info.stats.qual.updated );
-+ printf ( "%s discard.code: %d\n", "SIOCGIWSTATS", info.stats.discard.code );
-+ printf ( "%s discard.fragment: %d\n", "SIOCGIWSTATS", info.stats.discard.fragment );
-+ printf ( "%s discard.misc: %d\n", "SIOCGIWSTATS", info.stats.discard.misc );
-+ printf ( "%s discard.nwid: %d\n", "SIOCGIWSTATS", info.stats.discard.nwid );
-+ printf ( "%s discard.retries: %d\n", "SIOCGIWSTATS", info.stats.discard.retries );
-+ printf ( "%s miss.beacon: %d\n", "SIOCGIWSTATS", info.stats.miss.beacon );
-+ }
-+ else
-+ printf ( "%s %s\n", "SIOCGIWSTATS", " ===> no info.stats support" );
-+
-+ if ( info.txpower.flags & IW_TXPOW_MWATT )
-+ printf ( "%s txpower1: %d dBm disabled: %d fixed: %d flags: %d\n", "SIOCGIWRANGE",
-+ mWatt2dbm ( info.txpower.value ), info.txpower.disabled, info.txpower.fixed, info.txpower.flags);
-+ else
-+ printf ( "%s txpower2: %d dBm disabled: %d fixed: %d flags: %d\n", "SIOCGIWRANGE", info.txpower.value, info.txpower.disabled, info.txpower.fixed, info.txpower.flags );
-+
-+ if ( info.has_range )
-+ if ( info.sens.value < 0 )
-+ printf ( "%s sens: %d dBm\n", "SIOCGIWRANGE", info.sens.value );
-+ else
-+ printf ( "%s sens: %d/%d\n", "SIOCGIWRANGE", info.sens.value, info.range.sensitivity );
-+
-+ if ( info.has_range && ( info.stats.qual.level != 0 ))
-+ if ( info.stats.qual.level > info.range.max_qual.level )
-+ /* Statistics are in dBm (absolute power measurement) */
-+ printf ( "%s Quality: %d/%d Signal level: %d dBm Noise level: %d dBm\n",
-+ "SIOCGIWRANGE",
-+ info.stats.qual.qual, info.range.max_qual.qual,
-+ info.stats.qual.level - 0x100,
-+ info.stats.qual.noise - 0x100 );
-+ else
-+ printf ( "%s Quality: %d/%d Signal level: %d/%d Noise level: %d/%d",
-+ "SIOCGIWRANGE",
-+ info.stats.qual.qual, info.range.max_qual.qual,
-+ info.stats.qual.level, info.range.max_qual.level,
-+ info.stats.qual.noise, info.range.max_qual.noise );
-+
-+#endif // #ifdef DISPLAYWIEXT
-+}
-+
-+/****************************************************************************
-+* *
-+* Linked List Functions *
-+* *
-+****************************************************************************/
-+/****************************************************************************
-+* *
-+* addList() - add an entry to a linked list *
-+* *
-+****************************************************************************/
-+static void
-+addList ( char *l, char *data, int len )
-+{
-+ char uid[256];
-+ LIST_HEAD ( , avNode ) *list;
-+
-+ // NOTE: this assumes the UID is at the begining of the
-+ // data structure and that UIDs are strings
-+
-+ list = ( LIST_HEAD ( , avNode ) * ) l; // NOTE: don't know how to get
-+ strcpy ( uid, data ); // rid of compiler warning on
-+ // LISTHEAD typecast
-+ // create a new node and the data that goes in it
-+ newNode = malloc ( sizeof ( struct avNode ));
-+ newNode->data = malloc ( len );
-+ memcpy ( newNode->data, data, len );
-+
-+ // this deals with an empty list
-+ if ( LIST_EMPTY ( list )) {
-+ LIST_INSERT_HEAD ( list, newNode, nodes );
-+ return;
-+ }
-+
-+ // this deals with UIDs that match
-+ for ( np = LIST_FIRST ( list ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ if ( strncmp ( uid, np->data, strlen ( uid )) == 0 ) { // found matching UID
-+ LIST_INSERT_AFTER ( np, newNode, nodes );
-+ if ( np->data )
-+ free ( np->data );
-+ LIST_REMOVE ( np, nodes );
-+ free ( np );
-+ return;
-+ }
-+ }
-+
-+ // this deals with inserting a new UID in the list
-+ for ( np = LIST_FIRST ( list ); np != NULL; np = LIST_NEXT ( np, nodes )) {
-+ lastNode = np;
-+ if ( strncmp ( np->data, uid, strlen ( uid )) > 0 ) { // old ID > new ID AND
-+ LIST_INSERT_BEFORE ( np, newNode, nodes );
-+ return;
-+ }
-+ }
-+
-+ // this deals with a UID that needs to go on the end of the list
-+ LIST_INSERT_AFTER ( lastNode, newNode, nodes );
-+
-+ return;
-+}
-+
-+/****************************************************************************
-+* *
-+* initLists() - initialize all the linked lists *
-+* *
-+****************************************************************************/
-+static void initLists()
-+{
-+ LIST_INIT ( &scList ); LIST_INIT ( &aaList ); LIST_INIT ( &dfList );
-+ LIST_INIT ( &kmList ); LIST_INIT ( &prList );
-+ LIST_INIT ( &opList ); LIST_INIT ( &coList );
-+ LIST_INIT ( &gaList ); LIST_INIT ( &riList ); LIST_INIT ( &poList );
-+ LIST_INIT ( &paList ); LIST_INIT ( &ptList ); LIST_INIT ( &pfList );
-+ LIST_INIT ( &pdList ); LIST_INIT ( &piList ); LIST_INIT ( &rdList );
-+ LIST_INIT ( &alList ); LIST_INIT ( &rtList ); LIST_INIT ( &rrList );
-+}
-+/****************************************************************************
-+* *
-+* flushLists() - flush all linked lists *
-+* *
-+****************************************************************************/
-+static void flushLists()
-+{
-+ flushList (( char * ) &scList ); flushList (( char * ) &aaList );
-+ flushList (( char * ) &dfList ); flushList (( char * ) &kmList );
-+ flushList (( char * ) &prList );
-+ flushList (( char * ) &opList ); flushList (( char * ) &coList );
-+ flushList (( char * ) &gaList ); flushList (( char * ) &riList );
-+ flushList (( char * ) &poList ); flushList (( char * ) &paList );
-+ flushList (( char * ) &ptList ); flushList (( char * ) &pfList );
-+ flushList (( char * ) &pdList ); flushList (( char * ) &piList );
-+ flushList (( char * ) &rdList ); flushList (( char * ) &alList );
-+ flushList (( char * ) &rtList ); flushList (( char * ) &rrList );
-+}
-+
-+/****************************************************************************
-+* *
-+* flushList() - flush a linked list *
-+* *
-+****************************************************************************/
-+static void flushList ( char *l )
-+{
-+ LIST_HEAD ( , avNode ) *list;
-+
-+ list = ( LIST_HEAD ( , avNode ) * ) l; // NOTE: don't know how to get
-+ while ( !LIST_EMPTY ( list )) { // rid of compiler warning on
-+ np = LIST_FIRST ( list ); // LISTHEAD typecast
-+ if ( np->data )
-+ free ( np->data );
-+ LIST_REMOVE ( np, nodes );
-+ free ( np );
-+ }
-+}
-+
-+/****************************************************************************
-+* *
-+* Utility Functions *
-+* *
-+****************************************************************************/
-+/****************************************************************************
-+* *
-+* The following two routines were taken directly from iwlib.c *
-+* *
-+****************************************************************************/
-+ /*
-+ * Open a socket.
-+ * Depending on the protocol present, open the right socket. The socket
-+ * will allow us to talk to the driver.
-+ */
-+static int openSocket ( void )
-+{
-+ static const int families[] = {
-+ AF_INET, AF_IPX, AF_AX25, AF_APPLETALK
-+ };
-+ unsigned int i;
-+ int sock;
-+
-+ /*
-+ * Now pick any (exisiting) useful socket family for generic queries
-+ * Note : don't open all the socket, only returns when one matches,
-+ * all protocols might not be valid.
-+ * Workaround by Jim Kaba <jkaba@sarnoff.com>
-+ * Note : in 99% of the case, we will just open the inet_sock.
-+ * The remaining 1% case are not fully correct...
-+ */
-+
-+ /* Try all families we support */
-+ for(i = 0; i < sizeof(families)/sizeof(int); ++i) {
-+ /* Try to open the socket, if success returns it */
-+ sock = socket(families[i], SOCK_DGRAM, 0);
-+ if(sock >= 0)
-+ return sock;
-+ }
-+
-+ return -1;
-+}
-+
-+/*------------------------------------------------------------------*/
-+/*
-+ * Convert a value in milliWatt to a value in dBm.
-+ */
-+static int mWatt2dbm ( int in )
-+{
-+#ifdef WE_NOLIBM
-+ /* Version without libm : slower */
-+ double fin = (double) in;
-+ int res = 0;
-+
-+ /* Split integral and floating part to avoid accumulating rounding errors */
-+ while(fin > 10.0)
-+ {
-+ res += 10;
-+ fin /= 10.0;
-+ }
-+ while(fin > 1.000001) /* Eliminate rounding errors, take ceil */
-+ {
-+ res += 1;
-+ fin /= LOG10_MAGIC;
-+ }
-+ return(res);
-+#else /* WE_NOLIBM */
-+ /* Version with libm : faster */
-+ return((int) (ceil(10.0 * log10((double) in))));
-+#endif /* WE_NOLIBM */
-+}
-+
-+/****************************************************************************
-+* *
-+* htob - converts hex string to binary *
-+* *
-+****************************************************************************/
-+static char *htob ( char *s )
-+{
-+ char nibl, *byt;
-+ static char bin[20];
-+
-+ byt = bin;
-+
-+ while ((nibl = *s++) && nibl != ' ') { /* While not end of string. */
-+ nibl -= ( nibl > '9') ? ('A' - 10): '0';
-+ *byt = nibl << 4; /* place high nibble */
-+ if((nibl = *s++) && nibl != ' ') {
-+ nibl -= ( nibl > '9') ? ('A' - 10): '0';
-+ *byt |= nibl; /* place low nibble */
-+ }
-+ else break;
-+ ++byt;
-+ }
-+ *++byt = '\0';
-+ return ( bin );
-+}
-+
-+/****************************************************************************
-+* *
-+* hasChanged() - see if area has been changed from NULLs *
-+* *
-+****************************************************************************/
-+static int hasChanged ( char *loc, int len )
-+{
-+ char *wrk;
-+ int changed = TRUE;
-+
-+ wrk = malloc ( len );
-+ memset ( wrk, 0, len );
-+ if ( memcmp ( loc, wrk, len ) == 0 )
-+ changed = FALSE;
-+ free ( wrk );
-+
-+ return ( changed );
-+}
-+
---- /dev/null
-+++ b/agent/mibgroup/ieee802dot11.h
-@@ -0,0 +1,730 @@
-+/****************************************************************************
-+* *
-+* File Name: ieee802dot11.h *
-+* Used By: *
-+* *
-+* Operating System: *
-+* Purpose: *
-+* *
-+* Comments: *
-+* *
-+* Author: Larry Simmons *
-+* lsimmons@avantcom.com *
-+* www.avantcom.com *
-+* *
-+* Creation Date: 09/02/03 *
-+* *
-+* Ver Date Inits Modification *
-+* ----- -------- ----- ------------ *
-+* 0.0.1 09/02/03 LRS created *
-+* 0.0.2 09/24/03 LRS wouldn't build after fresh ./configure *
-+****************************************************************************/
-+/* This file was generated by mib2c and is intended for use as a mib module
-+ for the ucd-snmp snmpd agent. */
-+#ifndef _MIBGROUP_IEEE802DOT11_H
-+#define _MIBGROUP_IEEE802DOT11_H
-+/* we may use header_generic and header_simple_table from the util_funcs module */
-+
-+/****************************************************************************
-+* Includes *
-+****************************************************************************/
-+#include <sys/queue.h>
-+
-+/****************************************************************************
-+* Linked List Defines *
-+****************************************************************************/
-+// here are some Linked List MACROS I wanted to use,
-+// but curiously were not in /usr/includes/sys/queue.h
-+
-+#ifndef LIST_EMPTY
-+ #define LIST_EMPTY(head) ((head)->lh_first == NULL)
-+#endif
-+
-+#ifndef LIST_NEXT
-+ #define LIST_NEXT(elm, field) ((elm)->field.le_next)
-+#endif
-+
-+#ifndef LIST_INSERT_BEFORE
-+ #define LIST_INSERT_BEFORE(listelm, elm, field) do { \
-+ (elm)->field.le_prev = (listelm)->field.le_prev; \
-+ LIST_NEXT((elm), field) = (listelm); \
-+ *(listelm)->field.le_prev = (elm); \
-+ (listelm)->field.le_prev = &LIST_NEXT((elm), field); \
-+ } while (0)
-+#endif
-+
-+#ifndef LIST_FIRST
-+ #define LIST_FIRST(head) ((head)->lh_first)
-+#endif
-+
-+/****************************************************************************
-+* 802.11 MIB Defines *
-+****************************************************************************/
-+#define SYS_STRING_LEN 256
-+#define MACADDR_LEN ( 6 * 2 ) + 5
-+#define OPER_RATE_SET_LEN 126
-+#define MAN_OUI_LEN ( 3 * 2 ) + 2
-+#define WEP_STR_LEN 64
-+#define SNMP_STR_LEN 128
-+#define TEXT_LEN 80
-+#define IFINDEX_LEN 4
-+#define IFNAME_LEN 16
-+#define MAX_WEP_KEYS 4
-+
-+#define AUTHENICATION_ALGORITHMS_INDEX_LEN 4
-+#define WEP_DEFAULT_KEY_INDEX_LEN 4
-+#define WEP_KEY_MAPPING_INDEX_LEN 4
-+#define GROUP_ADDRESS_INDEX_LEN 4
-+#define REG_DOMAIN_SUPPORT_INDEX_LEN 4
-+#define ANTENNA_LIST_INDEX_LEN 4
-+#define SUPPORTED_DATA_RATES_TX_INDEX_LEN 4
-+#define SUPPORTED_DATA_RATES_RX_INDEX_LEN 4
-+
-+#define SC_UID_LEN IFINDEX_LEN
-+#define AA_UID_LEN IFINDEX_LEN + AUTHENICATION_ALGORITHMS_INDEX_LEN
-+#define DF_UID_LEN IFINDEX_LEN + WEP_DEFAULT_KEY_INDEX_LEN
-+#define KM_UID_LEN IFINDEX_LEN + WEP_KEY_MAPPING_INDEX_LEN
-+#define PR_UID_LEN IFINDEX_LEN
-+#define OP_UID_LEN IFINDEX_LEN
-+#define CO_UID_LEN IFINDEX_LEN
-+#define GA_UID_LEN IFINDEX_LEN + GROUP_ADDRESS_INDEX_LEN
-+#define RI_UID_LEN IFINDEX_LEN
-+#define PO_UID_LEN IFINDEX_LEN
-+#define PA_UID_LEN IFINDEX_LEN
-+#define PT_UID_LEN IFINDEX_LEN
-+#define PF_UID_LEN IFINDEX_LEN
-+#define PD_UID_LEN IFINDEX_LEN
-+#define PI_UID_LEN IFINDEX_LEN
-+#define RD_UID_LEN IFINDEX_LEN + REG_DOMAIN_SUPPORT_INDEX_LEN
-+#define AL_UID_LEN IFINDEX_LEN + ANTENNA_LIST_INDEX_LEN
-+#define RT_UID_LEN IFINDEX_LEN + SUPPORTED_DATA_RATES_TX_INDEX_LEN
-+#define RR_UID_LEN IFINDEX_LEN + SUPPORTED_DATA_RATES_RX_INDEX_LEN
-+
-+/****************************************************************************
-+* Linked List Structure *
-+****************************************************************************/
-+static struct avNode {
-+ LIST_ENTRY ( avNode ) nodes;
-+ char *data; // pointer to data
-+};
-+
-+typedef LIST_HEAD ( , avNode ) avList_t;
-+
-+/****************************************************************************
-+* 802.11 MIB structures *
-+****************************************************************************/
-+/****************************************************************************
-+* dot11Smt Group *
-+****************************************************************************/
-+/****************************************************************************
-+* dot11StationConfigTable *
-+****************************************************************************/
-+static struct scTbl_data {
-+
-+ char UID [ SC_UID_LEN + 1 ]; // unique ID
-+ char ifName [ IFNAME_LEN + 1 ]; // ifName of card
-+
-+ long ifIndex; // ifindex of card
-+
-+ char stationID [ MACADDR_LEN + 1 ]; // Default actual MacAddr
-+ long mediumOccupancyLimit;
-+ long CFPPollable;
-+ long CFPPeriod;
-+ long maxDuration;
-+ long authenticationResponseTimeOut;
-+ long privacyOptionImplemented;
-+ long powerManagementMode;
-+ char desiredSSID [ SNMP_STR_LEN + 1 ];
-+ long desiredBSSType;
-+ char operationalRateSet [ OPER_RATE_SET_LEN + 1];
-+ long beaconPeriod;
-+ long DTIMPeriod;
-+ long associationResponseTimeOut;
-+ long disAssociationReason;
-+ char disAssociationStation [ MACADDR_LEN + 1 ];
-+ long deAuthenticationReason;
-+ char deAuthenticationStation [ MACADDR_LEN + 1 ];
-+ long authenticateFailStatus;
-+ char authenticateFailStation [ MACADDR_LEN + 1 ];
-+
-+ long haveStationID;
-+ long haveMediumOccupancyLimit;
-+ long haveCFPPollable;
-+ long haveCFPPeriod;
-+ long haveMaxDuration;
-+ long haveAuthenticationResponseTimeOut;
-+ long havePrivacyOptionImplemented;
-+ long havePowerManagementMode;
-+ long haveDesiredSSID;
-+ long haveDesiredBSSType;
-+ long haveOperationalRateSet;
-+ long haveBeaconPeriod;
-+ long haveDTIMPeriod;
-+ long haveAssociationResponseTimeOut;
-+ long haveDisAssociationReason;
-+ long haveDisAssociationStation;
-+ long haveDeAuthenticationReason;
-+ long haveDeAuthenticationStation;
-+ long haveAuthenticateFailStatus;
-+ long haveAuthenticateFailStation;
-+
-+} nSc, *sc = &nSc;
-+
-+static avList_t scList;
-+
-+/****************************************************************************
-+* dot11AuthenticationAlgorithmsTable *
-+****************************************************************************/
-+static struct aaTbl_data {
-+
-+ char UID [ AA_UID_LEN + 1 ];
-+ char ifName [ IFNAME_LEN + 1 ]; // ifName of card
-+
-+ long ifIndex; // ifindex of card
-+ long authenticationAlgorithmsIndex;
-+
-+ long authenticationAlgorithm;
-+ long authenticationAlgorithmsEnable;
-+
-+ long haveAuthenticationAlgorithm;
-+ long haveAuthenticationAlgorithmsEnable;
-+
-+} nAa, *aa = &nAa;
-+
-+static avList_t aaList;
-+
-+/****************************************************************************
-+* dot11WEPDefaultKeysTable *
-+****************************************************************************/
-+static struct dfTbl_data {
-+
-+ char UID [ DF_UID_LEN + 1 ];
-+ char ifName [ IFNAME_LEN + 1 ];
-+
-+ long ifIndex; // ifindex of card
-+ long WEPDefaultKeyIndex;
-+
-+ char WEPDefaultKeyValue [ WEP_STR_LEN + 1 ];
-+ long haveWEPDefaultKeyValue;
-+
-+} nDf, *df = &nDf;
-+
-+static avList_t dfList;
-+
-+/****************************************************************************
-+* dot11WEPKeyMappingsTable *
-+****************************************************************************/
-+static struct kmTbl_data {
-+
-+ char UID [ KM_UID_LEN + 1 ];
-+ char ifName [ IFNAME_LEN + 1 ];
-+
-+ long ifIndex;
-+ long WEPKeyMappingIndex;
-+
-+ char WEPKeyMappingAddress [ MACADDR_LEN + 1 ];
-+ long WEPKeyMappingWEPOn;
-+ char WEPKeyMappingValue [ WEP_STR_LEN + 1 ];
-+ long WEPKeyMappingStatus;
-+
-+ long haveWEPKeyMappingIndex;
-+ long haveWEPKeyMappingAddress;
-+ long haveWEPKeyMappingWEPOn;
-+ long haveWEPKeyMappingValue;
-+ long haveWEPKeyMappingStatus;
-+
-+} nKm, *km = &nKm;
-+
-+static avList_t kmList;
-+
-+/****************************************************************************
-+* dot11PrivacyTable *
-+****************************************************************************/
-+static struct prTbl_data {
-+
-+ char UID [ PR_UID_LEN + 1 ];
-+ char ifName [ IFNAME_LEN + 1 ];
-+
-+ long ifIndex;
-+
-+ long privacyInvoked;
-+ long WEPDefaultKeyID;
-+ long WEPKeyMappingLength;
-+ long excludeUnencrypted;
-+ unsigned long WEPICVErrorCount;
-+ unsigned long WEPExcludedCount;
-+
-+ long havePrivacyInvoked;
-+ long haveWEPDefaultKeyID;
-+ long haveWEPKeyMappingLength;
-+ long haveExcludeUnencrypted;
-+ long haveWEPICVErrorCount;
-+ long haveWEPExcludedCount;
-+
-+} nPr, *pr = &nPr;
-+
-+static avList_t prList;
-+
-+/****************************************************************************
-+* dot11Mac Group *
-+****************************************************************************/
-+/****************************************************************************
-+* dot11OperationTable *
-+****************************************************************************/
-+static struct opTbl_data {
-+
-+ char UID [ OP_UID_LEN + 1 ]; // unique ID
-+ char ifName [ IFNAME_LEN + 1 ]; // ifName of card
-+
-+ long ifIndex; // ifindex of card
-+
-+ char MACAddress [ MACADDR_LEN + 1 ];
-+ long RTSThreshold;
-+ long shortRetryLimit;
-+ long longRetryLimit;
-+ long fragmentationThreshold;
-+ long maxTransmitMSDULifetime;
-+ long maxReceiveLifetime;
-+ char manufacturerID [ SNMP_STR_LEN + 1 ];
-+ char productID [ SNMP_STR_LEN + 1 ];
-+
-+ long haveMACAddress;
-+ long haveRTSThreshold;
-+ long haveShortRetryLimit;
-+ long haveLongRetryLimit;
-+ long haveFragmentationThreshold;
-+ long haveMaxTransmitMSDULifetime;
-+ long haveMaxReceiveLifetime;
-+ long haveManufacturerID;
-+ long haveProductID;
-+
-+} nOp, *op = &nOp;
-+
-+static avList_t opList;
-+
-+/****************************************************************************
-+* dot11CountersTable *
-+****************************************************************************/
-+static struct coTbl_data {
-+
-+ char UID [ CO_UID_LEN + 1 ]; // unique ID
-+ char ifName [ IFNAME_LEN + 1 ]; // ifName of card
-+
-+ long ifIndex; // ifindex of card
-+
-+ unsigned long transmittedFragmentCount;
-+ unsigned long multicastTransmittedFrameCount;
-+ unsigned long failedCount;
-+ unsigned long retryCount;
-+ unsigned long multipleRetryCount;
-+ unsigned long frameDuplicateCount;
-+ unsigned long RTSSuccessCount;
-+ unsigned long RTSFailureCount;
-+ unsigned long ACKFailureCount;
-+ unsigned long receivedFragmentCount;
-+ unsigned long multicastReceivedFrameCount;
-+ unsigned long FCSErrorCount;
-+ unsigned long transmittedFrameCount;
-+ unsigned long WEPUndecryptableCount;
-+
-+ long haveTransmittedFragmentCount;
-+ long haveMulticastTransmittedFrameCount;
-+ long haveFailedCount;
-+ long haveRetryCount;
-+ long haveMultipleRetryCount;
-+ long haveFrameDuplicateCount;
-+ long haveRTSSuccessCount;
-+ long haveRTSFailureCount;
-+ long haveACKFailureCount;
-+ long haveReceivedFragmentCount;
-+ long haveMulticastReceivedFrameCount;
-+ long haveFCSErrorCount;
-+ long haveTransmittedFrameCount;
-+ long haveWEPUndecryptableCount;
-+
-+} nCo, *co = &nCo;
-+
-+static avList_t coList;
-+
-+/****************************************************************************
-+* dot11GroupAddressesTable *
-+****************************************************************************/
-+static struct gaTbl_data {
-+
-+ char UID [ GA_UID_LEN + 1 ];
-+ char ifName [ IFNAME_LEN + 1 ];
-+
-+ long ifIndex; // ifindex of card
-+ long groupAddressesIndex;
-+
-+ char address [ MACADDR_LEN + 1 ];
-+ long groupAddressesStatus;
-+
-+ long haveAddress;
-+ long haveGroupAddressesStatus;
-+
-+} nGa, *ga = &nGa;
-+
-+static avList_t gaList;
-+
-+/****************************************************************************
-+* dot11Res Group *
-+****************************************************************************/
-+static char resourceTypeIDName[] = "RTID";
-+static long haveResourceTypeIDName = 1;
-+
-+/****************************************************************************
-+* dot11ResourceInfoTable *
-+****************************************************************************/
-+static struct riTbl_data {
-+
-+ char UID [ RI_UID_LEN + 1 ]; // unique ID
-+ char ifName [ IFNAME_LEN + 1 ]; // ifName of card
-+
-+ long ifIndex; // ifindex of card
-+
-+ char manufacturerOUI [ MAN_OUI_LEN + 1 ];
-+ char manufacturerName [ SYS_STRING_LEN + 1 ];
-+ char manufacturerProductName [ SYS_STRING_LEN + 1 ];
-+ char manufacturerProductVersion [ SYS_STRING_LEN + 1 ];
-+
-+ char haveManufacturerOUI;
-+ char haveManufacturerName;
-+ char haveManufacturerProductName;
-+ char haveManufacturerProductVersion;
-+
-+} nRi, *ri = &nRi;
-+
-+static avList_t riList;
-+
-+/****************************************************************************
-+* dot11Phy Group *
-+****************************************************************************/
-+/****************************************************************************
-+* dot11PhyOperationTable *
-+****************************************************************************/
-+static struct poTbl_data {
-+
-+ char UID [ PO_UID_LEN + 1 ]; // unique ID
-+ char ifName [ IFNAME_LEN + 1 ]; // ifName of card
-+
-+ long ifIndex; // ifindex of card
-+
-+ long PHYType;
-+ long currentRegDomain;
-+ long tempType;
-+
-+ long havePHYType;
-+ long haveCurrentRegDomain;
-+ long haveTempType;
-+
-+} nPo, *po = &nPo;
-+
-+static avList_t poList;
-+
-+/****************************************************************************
-+* dot11PhyAntennaEntry *
-+****************************************************************************/
-+static struct paTbl_data {
-+
-+ char UID [ PA_UID_LEN + 1 ]; // unique ID
-+ char ifName [ IFNAME_LEN + 1 ]; // ifName of card
-+
-+ long ifIndex; // ifindex of card
-+
-+ long currentTxAntenna;
-+ long diversitySupport;
-+ long currentRxAntenna;
-+
-+ long haveCurrentTxAntenna;
-+ long haveDiversitySupport;
-+ long haveCurrentRxAntenna;
-+
-+} nPa, *pa = &nPa;
-+
-+static avList_t paList;
-+
-+/****************************************************************************
-+* dot11PhyTxPowerTable *
-+****************************************************************************/
-+static struct ptTbl_data {
-+
-+ char UID [ PT_UID_LEN + 1 ]; // unique ID
-+ char ifName [ IFNAME_LEN + 1 ]; // ifName of card
-+
-+ long ifIndex; // ifindex of card
-+
-+ long numberSupportedPowerLevels;
-+ long TxPowerLevel1;
-+ long TxPowerLevel2;
-+ long TxPowerLevel3;
-+ long TxPowerLevel4;
-+ long TxPowerLevel5;
-+ long TxPowerLevel6;
-+ long TxPowerLevel7;
-+ long TxPowerLevel8;
-+ long currentTxPowerLevel;
-+
-+ long haveNumberSupportedPowerLevels;
-+ long haveTxPowerLevel1;
-+ long haveTxPowerLevel2;
-+ long haveTxPowerLevel3;
-+ long haveTxPowerLevel4;
-+ long haveTxPowerLevel5;
-+ long haveTxPowerLevel6;
-+ long haveTxPowerLevel7;
-+ long haveTxPowerLevel8;
-+ long haveCurrentTxPowerLevel ;
-+
-+} nPt, *pt = &nPt;
-+
-+static avList_t ptList;
-+
-+/****************************************************************************
-+* dot11PhyFHSSTable *
-+****************************************************************************/
-+static struct pfTbl_data {
-+
-+ char UID [ PF_UID_LEN + 1 ]; // unique ID
-+ char ifName [ IFNAME_LEN + 1 ]; // ifName of card
-+
-+ long ifIndex; // ifindex of card
-+
-+ long hopTime;
-+ long currentChannelNumber;
-+ long maxDwellTime;
-+ long currentDwellTime;
-+ long currentSet;
-+ long currentPattern;
-+ long currentIndex;
-+
-+ long haveHopTime;
-+ long haveCurrentChannelNumber;
-+ long haveMaxDwellTime;
-+ long haveCurrentDwellTime;
-+ long haveCurrentSet;
-+ long haveCurrentPattern;
-+ long haveCurrentIndex;
-+
-+} nPf, *pf = &nPf;
-+
-+static avList_t pfList;
-+
-+/****************************************************************************
-+* dot11PhyDSSSTable *
-+****************************************************************************/
-+static struct pdTbl_data {
-+
-+ char UID [ PD_UID_LEN + 1 ]; // unique ID
-+ char ifName [ IFNAME_LEN + 1 ]; // ifName of card
-+
-+ long ifIndex; // ifindex of card
-+
-+ long currentChannel;
-+ long CCAModeSupported;
-+ long currentCCAMode;
-+ long EDThreshold;
-+
-+ long haveCurrentChannel;
-+ long haveCCAModeSupported ;
-+ long haveCurrentCCAMode;
-+ long haveEDThreshold;
-+
-+} nPd, *pd = &nPd;
-+
-+static avList_t pdList;
-+
-+/****************************************************************************
-+* dot11PhyIRTable *
-+****************************************************************************/
-+static struct piTbl_data {
-+
-+ char UID [ PI_UID_LEN + 1 ]; // unique ID
-+ char ifName [ IFNAME_LEN + 1 ]; // ifName of card
-+
-+ long ifIndex; // ifindex of card
-+
-+ long CCAWatchdogTimerMax;
-+ long CCAWatchdogCountMax;
-+ long CCAWatchdogTimerMin;
-+ long CCAWatchdogCountMin;
-+
-+ long haveCCAWatchdogTimerMax;
-+ long haveCCAWatchdogCountMax;
-+ long haveCCAWatchdogTimerMin;
-+ long haveCCAWatchdogCountMin;
-+
-+} nPi, *pi = &nPi;
-+
-+static avList_t piList;
-+
-+/****************************************************************************
-+* dot11RegDomainsSupportedTable *
-+****************************************************************************/
-+static struct rdTbl_data {
-+
-+ char UID [ RD_UID_LEN + 1 ];
-+ char ifName [ IFNAME_LEN + 1 ];
-+
-+ long ifIndex; // ifindex of card
-+ long regDomainsSupportIndex;
-+
-+ long regDomainsSupportValue;
-+ long haveRegDomainsSupportValue;
-+
-+} nRd, *rd = &nRd;
-+
-+static avList_t rdList;
-+
-+/****************************************************************************
-+* dot11AntennasListTable *
-+****************************************************************************/
-+static struct alTbl_data {
-+
-+ char UID [ AL_UID_LEN + 1 ];
-+ char ifName [ IFNAME_LEN + 1 ];
-+
-+ long ifIndex; // ifindex of card
-+ long antennaListIndex;
-+
-+ long supportedTxAntenna;
-+ long supportedRxAntenna;
-+ long diversitySelectionRx ;
-+
-+ long haveSupportedTxAntenna;
-+ long haveSupportedRxAntenna;
-+ long haveDiversitySelectionRx ;
-+
-+} nAl, *al = &nAl;
-+
-+static avList_t alList;
-+
-+/****************************************************************************
-+* dot11SupportedDataRatesTxTable *
-+****************************************************************************/
-+static struct rtTbl_data {
-+
-+ char UID [ RT_UID_LEN + 1 ];
-+ char ifName [ IFNAME_LEN + 1 ];
-+
-+ long ifIndex; // ifindex of card
-+ long supportedDataRatesTxIndex;
-+
-+ long supportedDataRatesTxValue;
-+ long haveSupportedDataRatesTxValue;
-+
-+} nRt, *rt = &nRt;
-+
-+static avList_t rtList;
-+
-+/****************************************************************************
-+* dot11SupportedDataRatesRxTable *
-+****************************************************************************/
-+static struct rrTbl_data {
-+
-+ char UID [ RR_UID_LEN + 1 ];
-+ char ifName [ IFNAME_LEN + 1 ];
-+
-+ long ifIndex; // ifindex of card
-+ long supportedDataRatesRxIndex;
-+
-+ long supportedDataRatesRxValue;
-+ long haveSupportedDataRatesRxValue;
-+
-+} nRr, *rr = &nRr;
-+
-+static avList_t rrList;
-+
-+/****************************************************************************
-+* Wireless Extensions Structures *
-+****************************************************************************/
-+static long wepCurrentKey;
-+static long haveWepCurrentKey;
-+static struct wepTbl_data {
-+
-+ long len;
-+ char key [ WEP_STR_LEN + 1 ];
-+ long haveKey;
-+
-+} wep[4];
-+
-+/****************************************************************************
-+* *
-+****************************************************************************/
-+config_require(util_funcs)
-+
-+/* function prototypes */
-+
-+void init_ieee802dot11 ( void );
-+FindVarMethod var_ieee802dot11;
-+FindVarMethod var_dot11StationConfigTable;
-+FindVarMethod var_dot11AuthenticationAlgorithmsTable;
-+FindVarMethod var_dot11WEPDefaultKeysTable;
-+FindVarMethod var_dot11WEPKeyMappingsTable;
-+FindVarMethod var_dot11PrivacyTable;
-+FindVarMethod var_dot11OperationTable;
-+FindVarMethod var_dot11CountersTable;
-+FindVarMethod var_dot11GroupAddressesTable;
-+FindVarMethod var_dot11ResourceInfoTable;
-+FindVarMethod var_dot11PhyOperationTable;
-+FindVarMethod var_dot11PhyAntennaTable;
-+FindVarMethod var_dot11PhyTxPowerTable;
-+FindVarMethod var_dot11PhyFHSSTable;
-+FindVarMethod var_dot11PhyDSSSTable;
-+FindVarMethod var_dot11PhyIRTable;
-+FindVarMethod var_dot11RegDomainsSupportedTable;
-+FindVarMethod var_dot11AntennasListTable;
-+FindVarMethod var_dot11SupportedDataRatesTxTable;
-+FindVarMethod var_dot11SupportedDataRatesRxTable;
-+
-+WriteMethod write_dot11StationID;
-+WriteMethod write_dot11MediumOccupancyLimit;
-+WriteMethod write_dot11CFPPeriod;
-+WriteMethod write_dot11CFPMaxDuration;
-+WriteMethod write_dot11AuthenticationResponseTimeOut;
-+WriteMethod write_dot11PowerManagementMode;
-+WriteMethod write_dot11DesiredSSID;
-+WriteMethod write_dot11DesiredBSSType;
-+WriteMethod write_dot11OperationalRateSet;
-+WriteMethod write_dot11BeaconPeriod;
-+WriteMethod write_dot11DTIMPeriod;
-+WriteMethod write_dot11AssociationResponseTimeOut;
-+WriteMethod write_dot11AuthenticationAlgorithmsEnable;
-+WriteMethod write_dot11WEPDefaultKeyValue;
-+WriteMethod write_dot11WEPKeyMappingAddress;
-+WriteMethod write_dot11WEPKeyMappingWEPOn;
-+WriteMethod write_dot11WEPKeyMappingValue;
-+WriteMethod write_dot11WEPKeyMappingStatus;
-+WriteMethod write_dot11PrivacyInvoked;
-+WriteMethod write_dot11WEPDefaultKeyID;
-+WriteMethod write_dot11WEPKeyMappingLength;
-+WriteMethod write_dot11ExcludeUnencrypted;
-+WriteMethod write_dot11RTSThreshold;
-+WriteMethod write_dot11ShortRetryLimit;
-+WriteMethod write_dot11LongRetryLimit;
-+WriteMethod write_dot11FragmentationThreshold;
-+WriteMethod write_dot11MaxTransmitMSDULifetime;
-+WriteMethod write_dot11MaxReceiveLifetime;
-+WriteMethod write_dot11Address;
-+WriteMethod write_dot11GroupAddressesStatus;
-+WriteMethod write_dot11CurrentRegDomain;
-+WriteMethod write_dot11CurrentTxAntenna;
-+WriteMethod write_dot11CurrentRxAntenna;
-+WriteMethod write_dot11CurrentTxPowerLevel;
-+WriteMethod write_dot11CurrentChannelNumber;
-+WriteMethod write_dot11CurrentDwellTime;
-+WriteMethod write_dot11CurrentSet;
-+WriteMethod write_dot11CurrentPattern;
-+WriteMethod write_dot11CurrentIndex;
-+WriteMethod write_dot11CurrentChannel;
-+WriteMethod write_dot11CurrentCCAMode;
-+WriteMethod write_dot11EDThreshold;
-+WriteMethod write_dot11CCAWatchdogTimerMax;
-+WriteMethod write_dot11CCAWatchdogCountMax;
-+WriteMethod write_dot11CCAWatchdogTimerMin;
-+WriteMethod write_dot11CCAWatchdogCountMin;
-+WriteMethod write_dot11SupportedTxAntenna;
-+WriteMethod write_dot11SupportedRxAntenna;
-+WriteMethod write_dot11DiversitySelectionRx;
-+
-+#endif /* _MIBGROUP_IEEE802DOT11_H */
---- /dev/null
-+++ b/agent/mibgroup/iwlib.h
-@@ -0,0 +1,502 @@
-+/*
-+ * Wireless Tools
-+ *
-+ * Jean II - HPLB 97->99 - HPL 99->02
-+ *
-+ * Common header for the Wireless Extension library...
-+ *
-+ * This file is released under the GPL license.
-+ * Copyright (c) 1997-2002 Jean Tourrilhes <jt@hpl.hp.com>
-+ */
-+
-+#ifndef IWLIB_H
-+#define IWLIB_H
-+
-+/*#include "CHANGELOG.h"*/
-+
-+/***************************** INCLUDES *****************************/
-+
-+/* Standard headers */
-+#include <sys/types.h>
-+#include <sys/ioctl.h>
-+#include <stdio.h>
-+#include <math.h>
-+#include <errno.h>
-+#include <fcntl.h>
-+#include <ctype.h>
-+#include <stdlib.h>
-+#include <string.h>
-+#include <unistd.h>
-+#include <netdb.h> /* gethostbyname, getnetbyname */
-+#include <net/ethernet.h> /* struct ether_addr */
-+#include <sys/time.h> /* struct timeval */
-+#include <unistd.h>
-+
-+/* This is our header selection. Try to hide the mess and the misery :-(
-+ * Don't look, you would go blind ;-) */
-+
-+#ifndef LINUX_VERSION_CODE
-+#include <linux/version.h>
-+#endif
-+
-+/* Kernel headers 2.4.X + Glibc 2.2 - Mandrake 8.0, Debian 2.3, RH 7.1
-+ * Kernel headers 2.2.X + Glibc 2.2 - Slackware 8.0 */
-+#if defined(__GLIBC__) \
-+ && __GLIBC__ == 2 \
-+ && __GLIBC_MINOR__ >= 2 \
-+ && LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
-+//#define GLIBC22_HEADERS
-+#define GENERIC_HEADERS
-+
-+/* Kernel headers 2.4.X + Glibc 2.1 - Debian 2.2 upgraded, RH 7.0
-+ * Kernel headers 2.2.X + Glibc 2.1 - Debian 2.2, RH 6.1 */
-+#elif defined(__GLIBC__) \
-+ && __GLIBC__ == 2 \
-+ && __GLIBC_MINOR__ == 1 \
-+ && LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
-+//#define GLIBC_HEADERS
-+#define GENERIC_HEADERS
-+
-+/* Kernel headers 2.2.X + Glibc 2.0 - Debian 2.1 */
-+#elif defined(__GLIBC__) \
-+ && __GLIBC__ == 2 \
-+ && __GLIBC_MINOR__ == 0 \
-+ && LINUX_VERSION_CODE >= KERNEL_VERSION(2,0,0) \
-+ && LINUX_VERSION_CODE < KERNEL_VERSION(2,1,0)
-+#define GLIBC_HEADERS
-+#define KLUDGE_HEADERS
-+
-+/* Note : is it really worth supporting kernel 2.0.X, knowing that
-+ * we require WE v9, which is only available in 2.2.X and higher ?
-+ * I guess one could use 2.0.x with an upgraded wireless.h... */
-+
-+/* Kernel headers 2.0.X + Glibc 2.0 - Debian 2.0, RH 5 */
-+#elif defined(__GLIBC__) \
-+ && __GLIBC__ == 2 \
-+ && __GLIBC_MINOR__ == 0 \
-+ && LINUX_VERSION_CODE < KERNEL_VERSION(2,1,0) \
-+ && LINUX_VERSION_CODE >= KERNEL_VERSION(2,0,0)
-+#define GLIBC_HEADERS
-+
-+/* Kernel headers 2.0.X + libc5 - old systems */
-+#elif defined(_LINUX_C_LIB_VERSION_MAJOR) \
-+ && _LINUX_C_LIB_VERSION_MAJOR == 5 \
-+ && LINUX_VERSION_CODE >= KERNEL_VERSION(2,0,0) \
-+ && LINUX_VERSION_CODE < KERNEL_VERSION(2,1,0)
-+#define LIBC5_HEADERS
-+
-+/* Unsupported combination */
-+#else
-+#error "Your kernel/libc combination is not supported"
-+#endif
-+
-+#ifdef GENERIC_HEADERS
-+/* Proposed by Dr. Michael Rietz <rietz@mail.amps.de>, 27.3.2 */
-+/* If this works for all, it might be more stable on the long term - Jean II */
-+#include <net/if_arp.h> /* For ARPHRD_ETHER */
-+#include <sys/socket.h> /* For AF_INET & struct sockaddr */
-+#include <netinet/in.h> /* For struct sockaddr_in */
-+#include <netinet/if_ether.h>
-+#endif /* GENERIC_HEADERS */
-+
-+#ifdef GLIBC22_HEADERS
-+/* Added by Ross G. Miller <Ross_Miller@baylor.edu>, 3/28/01 */
-+#include <linux/if_arp.h> /* For ARPHRD_ETHER */
-+#include <linux/socket.h> /* For AF_INET & struct sockaddr */
-+#include <sys/socket.h>
-+#endif /* GLIBC22_HEADERS */
-+
-+#ifdef KLUDGE_HEADERS
-+#include <socketbits.h>
-+#endif /* KLUDGE_HEADERS */
-+
-+#ifdef GLIBC_HEADERS
-+#include <linux/if_arp.h> /* For ARPHRD_ETHER */
-+#include <linux/socket.h> /* For AF_INET & struct sockaddr */
-+#include <linux/in.h> /* For struct sockaddr_in */
-+#endif /* KLUDGE_HEADERS || GLIBC_HEADERS */
-+
-+#ifdef LIBC5_HEADERS
-+#include <sys/socket.h> /* For AF_INET & struct sockaddr & socket() */
-+#include <linux/if_arp.h> /* For ARPHRD_ETHER */
-+#include <linux/in.h> /* For struct sockaddr_in */
-+#endif /* LIBC5_HEADERS */
-+
-+/* Those 3 headers were previously included in wireless.h */
-+#include <linux/types.h> /* for "caddr_t" et al */
-+#include <linux/socket.h> /* for "struct sockaddr" et al */
-+#include <linux/if.h> /* for IFNAMSIZ and co... */
-+
-+#ifdef WEXT_HEADER
-+/* Private copy of Wireless extensions */
-+#include WEXT_HEADER
-+#else /* !WEXT_HEADER */
-+/* System wide Wireless extensions */
-+#include <linux/wireless.h>
-+#endif /* !WEXT_HEADER */
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/****************************** DEBUG ******************************/
-+
-+
-+/************************ CONSTANTS & MACROS ************************/
-+
-+/* Paths */
-+#define PROC_NET_WIRELESS "/proc/net/wireless"
-+#define PROC_NET_DEV "/proc/net/dev"
-+
-+/* Some usefull constants */
-+#define KILO 1e3
-+#define MEGA 1e6
-+#define GIGA 1e9
-+/* For doing log10/exp10 without libm */
-+#define LOG10_MAGIC 1.25892541179
-+
-+/* Backward compatibility for Wireless Extension 9 */
-+#ifndef IW_POWER_MODIFIER
-+#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */
-+#define IW_POWER_MIN 0x0001 /* Value is a minimum */
-+#define IW_POWER_MAX 0x0002 /* Value is a maximum */
-+#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
-+#endif /* IW_POWER_MODIFIER */
-+
-+#ifndef IW_ENCODE_NOKEY
-+#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not here */
-+#define IW_ENCODE_MODE 0xF000 /* Modes defined below */
-+#endif /* IW_ENCODE_NOKEY */
-+#ifndef IW_ENCODE_TEMP
-+#define IW_ENCODE_TEMP 0x0400 /* Temporary key */
-+#endif /* IW_ENCODE_TEMP */
-+
-+/* More backward compatibility */
-+#ifndef SIOCSIWCOMMIT
-+#define SIOCSIWCOMMIT SIOCSIWNAME
-+#endif /* SIOCSIWCOMMIT */
-+
-+/****************************** TYPES ******************************/
-+
-+/* Shortcuts */
-+typedef struct iw_statistics iwstats;
-+typedef struct iw_range iwrange;
-+typedef struct iw_param iwparam;
-+typedef struct iw_freq iwfreq;
-+typedef struct iw_quality iwqual;
-+typedef struct iw_priv_args iwprivargs;
-+typedef struct sockaddr sockaddr;
-+
-+/* Structure for storing all wireless information for each device
-+ * This is pretty exhaustive... */
-+typedef struct wireless_info
-+{
-+ char name[IFNAMSIZ + 1]; /* Wireless/protocol name */
-+ int has_nwid;
-+ iwparam nwid; /* Network ID */
-+ int has_freq;
-+ double freq; /* Frequency/channel */
-+ int has_sens;
-+ iwparam sens; /* sensitivity */
-+ int has_key;
-+ unsigned char key[IW_ENCODING_TOKEN_MAX]; /* Encoding key used */
-+ int key_size; /* Number of bytes */
-+ int key_flags; /* Various flags */
-+ int has_essid;
-+ int essid_on;
-+ char essid[IW_ESSID_MAX_SIZE + 1]; /* ESSID (extended network) */
-+ int has_nickname;
-+ char nickname[IW_ESSID_MAX_SIZE + 1]; /* NickName */
-+ int has_ap_addr;
-+ sockaddr ap_addr; /* Access point address */
-+ int has_bitrate;
-+ iwparam bitrate; /* Bit rate in bps */
-+ int has_rts;
-+ iwparam rts; /* RTS threshold in bytes */
-+ int has_frag;
-+ iwparam frag; /* Fragmentation threshold in bytes */
-+ int has_mode;
-+ int mode; /* Operation mode */
-+ int has_power;
-+ iwparam power; /* Power management parameters */
-+ int has_txpower;
-+ iwparam txpower; /* Transmit Power in dBm */
-+ int has_retry;
-+ iwparam retry; /* Retry limit or lifetime */
-+
-+ /* Stats */
-+ iwstats stats;
-+ int has_stats;
-+ iwrange range;
-+ int has_range;
-+} wireless_info;
-+
-+/* Structure for storing all wireless information for each device
-+ * This is a cut down version of the one above, containing only
-+ * the things *truly* needed to configure a card.
-+ * Don't add other junk, I'll remove it... */
-+typedef struct wireless_config
-+{
-+ char name[IFNAMSIZ + 1]; /* Wireless/protocol name */
-+ int has_nwid;
-+ iwparam nwid; /* Network ID */
-+ int has_freq;
-+ double freq; /* Frequency/channel */
-+ int has_key;
-+ unsigned char key[IW_ENCODING_TOKEN_MAX]; /* Encoding key used */
-+ int key_size; /* Number of bytes */
-+ int key_flags; /* Various flags */
-+ int has_essid;
-+ int essid_on;
-+ char essid[IW_ESSID_MAX_SIZE + 1]; /* ESSID (extended network) */
-+ int has_mode;
-+ int mode; /* Operation mode */
-+} wireless_config;
-+
-+typedef struct stream_descr
-+{
-+ char * end; /* End of the stream */
-+ char * current; /* Current event in stream of events */
-+ char * value; /* Current value in event */
-+} stream_descr;
-+
-+/* Prototype for handling display of each single interface on the
-+ * system - see iw_enum_devices() */
-+typedef int (*iw_enum_handler)(int skfd,
-+ char * ifname,
-+ char * args[],
-+ int count);
-+
-+/**************************** PROTOTYPES ****************************/
-+/*
-+ * All the functions in iwcommon.c
-+ */
-+
-+/* ---------------------- SOCKET SUBROUTINES -----------------------*/
-+int
-+ iw_sockets_open(void);
-+void
-+ iw_enum_devices(int skfd,
-+ iw_enum_handler fn,
-+ char * args[],
-+ int count);
-+/* --------------------- WIRELESS SUBROUTINES ----------------------*/
-+int
-+ iw_get_range_info(int skfd,
-+ char * ifname,
-+ iwrange * range);
-+int
-+ iw_print_version_info(char * toolname);
-+int
-+ iw_get_priv_info(int skfd,
-+ char * ifname,
-+ iwprivargs * priv,
-+ int maxpriv);
-+int
-+ iw_get_basic_config(int skfd,
-+ char * ifname,
-+ wireless_config * info);
-+int
-+ iw_set_basic_config(int skfd,
-+ char * ifname,
-+ wireless_config * info);
-+/* --------------------- PROTOCOL SUBROUTINES --------------------- */
-+int
-+ iw_protocol_compare(char * protocol1,
-+ char * protocol2);
-+/* -------------------- FREQUENCY SUBROUTINES --------------------- */
-+void
-+ iw_float2freq(double in,
-+ iwfreq * out);
-+double
-+ iw_freq2float(iwfreq * in);
-+void
-+ iw_print_freq(char * buffer,
-+ double freq);
-+int
-+ iw_freq_to_channel(double freq,
-+ struct iw_range * range);
-+void
-+ iw_print_bitrate(char * buffer,
-+ int bitrate);
-+/* ---------------------- POWER SUBROUTINES ----------------------- */
-+int
-+ iw_dbm2mwatt(int in);
-+int
-+ iw_mwatt2dbm(int in);
-+/* -------------------- STATISTICS SUBROUTINES -------------------- */
-+int
-+ iw_get_stats(int skfd,
-+ char * ifname,
-+ iwstats * stats);
-+void
-+ iw_print_stats(char * buffer,
-+ iwqual * qual,
-+ iwrange * range,
-+ int has_range);
-+/* --------------------- ENCODING SUBROUTINES --------------------- */
-+void
-+ iw_print_key(char * buffer,
-+ unsigned char * key,
-+ int key_size,
-+ int key_flags);
-+int
-+ iw_in_key(char * input,
-+ unsigned char * key);
-+int
-+ iw_in_key_full(int skfd,
-+ char * ifname,
-+ char * input,
-+ unsigned char * key,
-+ __u16 * flags);
-+/* ----------------- POWER MANAGEMENT SUBROUTINES ----------------- */
-+void
-+ iw_print_pm_value(char * buffer,
-+ int value,
-+ int flags);
-+void
-+ iw_print_pm_mode(char * buffer,
-+ int flags);
-+/* --------------- RETRY LIMIT/LIFETIME SUBROUTINES --------------- */
-+#if WIRELESS_EXT > 10
-+void
-+ iw_print_retry_value(char * buffer,
-+ int value,
-+ int flags);
-+#endif
-+/* ----------------------- TIME SUBROUTINES ----------------------- */
-+void
-+ iw_print_timeval(char * buffer,
-+ const struct timeval * time);
-+/* --------------------- ADDRESS SUBROUTINES ---------------------- */
-+int
-+ iw_check_mac_addr_type(int skfd,
-+ char * ifname);
-+int
-+ iw_check_if_addr_type(int skfd,
-+ char * ifname);
-+#if 0
-+int
-+ iw_check_addr_type(int skfd,
-+ char * ifname);
-+#endif
-+void
-+ iw_ether_ntop(const struct ether_addr* eth, char* buf);
-+char*
-+ iw_ether_ntoa(const struct ether_addr* eth);
-+int
-+ iw_ether_aton(const char* bufp, struct ether_addr* eth);
-+int
-+ iw_in_inet(char *bufp, struct sockaddr *sap);
-+int
-+ iw_in_addr(int skfd,
-+ char * ifname,
-+ char * bufp,
-+ struct sockaddr * sap);
-+/* ----------------------- MISC SUBROUTINES ------------------------ */
-+int
-+ iw_get_priv_size(int args);
-+
-+#if WIRELESS_EXT > 13
-+/* ---------------------- EVENT SUBROUTINES ---------------------- */
-+void
-+ iw_init_event_stream(struct stream_descr * stream,
-+ char * data,
-+ int len);
-+int
-+ iw_extract_event_stream(struct stream_descr * stream,
-+ struct iw_event * iwe);
-+#endif /* WIRELESS_EXT > 13 */
-+
-+/**************************** VARIABLES ****************************/
-+
-+extern const char * const iw_operation_mode[];
-+#define IW_NUM_OPER_MODE 7
-+
-+/************************* INLINE FUNTIONS *************************/
-+/*
-+ * Functions that are so simple that it's more efficient inlining them
-+ */
-+
-+/*
-+ * Note : I've defined wrapper for the ioctl request so that
-+ * it will be easier to migrate to other kernel API if needed
-+ */
-+
-+/*------------------------------------------------------------------*/
-+/*
-+ * Wrapper to push some Wireless Parameter in the driver
-+ */
-+static inline int
-+iw_set_ext(int skfd, /* Socket to the kernel */
-+ char * ifname, /* Device name */
-+ int request, /* WE ID */
-+ struct iwreq * pwrq) /* Fixed part of the request */
-+{
-+ /* Set device name */
-+ strncpy(pwrq->ifr_name, ifname, IFNAMSIZ);
-+ /* Do the request */
-+ return(ioctl(skfd, request, pwrq));
-+}
-+
-+/*------------------------------------------------------------------*/
-+/*
-+ * Wrapper to extract some Wireless Parameter out of the driver
-+ */
-+static inline int
-+iw_get_ext(int skfd, /* Socket to the kernel */
-+ char * ifname, /* Device name */
-+ int request, /* WE ID */
-+ struct iwreq * pwrq) /* Fixed part of the request */
-+{
-+ /* Set device name */
-+ strncpy(pwrq->ifr_name, ifname, IFNAMSIZ);
-+ /* Do the request */
-+ return(ioctl(skfd, request, pwrq));
-+}
-+
-+/*------------------------------------------------------------------*/
-+/* Backwards compatability
-+ * Actually, those form are much easier to use when dealing with
-+ * struct sockaddr... */
-+static inline char*
-+iw_pr_ether(char* bufp, const unsigned char* addr)
-+{
-+ iw_ether_ntop((const struct ether_addr *) addr, bufp);
-+ return bufp;
-+}
-+/* Backwards compatability */
-+static inline int
-+iw_in_ether(const char *bufp, struct sockaddr *sap)
-+{
-+ sap->sa_family = ARPHRD_ETHER;
-+ return iw_ether_aton(bufp, (struct ether_addr *) sap->sa_data) ? 0 : -1;
-+}
-+
-+/*------------------------------------------------------------------*/
-+/*
-+ * Create an Ethernet broadcast address
-+ */
-+static inline void
-+iw_broad_ether(struct sockaddr *sap)
-+{
-+ sap->sa_family = ARPHRD_ETHER;
-+ memset((char *) sap->sa_data, 0xFF, ETH_ALEN);
-+}
-+
-+/*------------------------------------------------------------------*/
-+/*
-+ * Create an Ethernet NULL address
-+ */
-+static inline void
-+iw_null_ether(struct sockaddr *sap)
-+{
-+ sap->sa_family = ARPHRD_ETHER;
-+ memset((char *) sap->sa_data, 0x00, ETH_ALEN);
-+}
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* IWLIB_H */
projects / packages.git / commitdiff