From 324f95d2a1174166dff97cae61ed3338eefd18bc Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 28 Jan 2016 17:19:48 +0000 Subject: [PATCH] CC: hostapd: fix wpad-mesh and wpa-supplicant-mesh configuration issues Signed-off-by: Felix Fietkau SVN-Revision: 48528 --- package/network/services/hostapd/Makefile | 19 +- .../hostapd/files/wpa_supplicant-mesh.config | 407 --------------------- 2 files changed, 9 insertions(+), 417 deletions(-) delete mode 100644 package/network/services/hostapd/files/wpa_supplicant-mesh.config diff --git a/package/network/services/hostapd/Makefile b/package/network/services/hostapd/Makefile index 1b8d083ba7..4d83066ab1 100644 --- a/package/network/services/hostapd/Makefile +++ b/package/network/services/hostapd/Makefile @@ -40,6 +40,10 @@ LOCAL_TYPE=$(strip \ hostapd \ ))) LOCAL_VARIANT=$(patsubst wpad-%,%,$(patsubst supplicant-%,%,$(BUILD_VARIANT))) +CONFIG_VARIANT:=$(LOCAL_VARIANT) +ifeq ($(LOCAL_VARIANT),mesh) + CONFIG_VARIANT:=full +endif ifeq ($(LOCAL_TYPE),supplicant) ifeq ($(LOCAL_VARIANT),full) @@ -47,10 +51,6 @@ ifeq ($(LOCAL_TYPE),supplicant) CONFIG_WPA_SUPPLICANT_INTERNAL \ CONFIG_WPA_SUPPLICANT_OPENSSL endif - ifeq ($(LOCAL_VARIANT),mesh) - PKG_CONFIG_DEPENDS += \ - CONFIG_WPA_SUPPLICANT_OPENSSL - endif endif PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) @@ -82,7 +82,7 @@ ifneq ($(LOCAL_TYPE),hostapd) endif endif ifeq ($(LOCAL_VARIANT),mesh) - DRIVER_MAKEOPTS += CONFIG_TLS=openssl + DRIVER_MAKEOPTS += CONFIG_TLS=openssl CONFIG_AP=y CONFIG_SAE=y CONFIG_MESH=y TARGET_LDFLAGS += -lcrypto -lssl endif ifdef CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK @@ -177,8 +177,7 @@ endef define Package/wpad-mesh $(call Package/wpad/Default) TITLE+= (with 802.11s mesh and SAE support) - DEPENDS:=$(DRV_DEPENDS) +libubus +PACKAGE_wpad-mesh:libopenssl +@CONFIG_WPA_SUPPLICANT_OPENSSL @(!TARGET_uml||BROKEN) - CONFLICTS:=@WPA_SUPPLICANT_INTERNAL + DEPENDS:=$(DRV_DEPENDS) +libubus +PACKAGE_wpad-mesh:libopenssl @(!TARGET_uml||BROKEN) VARIANT:=wpad-mesh endef @@ -284,10 +283,10 @@ endif define Build/Configure $(Build/Configure/rebuild) - $(if $(wildcard ./files/hostapd-$(LOCAL_VARIANT).config), \ - $(CP) ./files/hostapd-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config \ + $(if $(wildcard ./files/hostapd-$(CONFIG_VARIANT).config), \ + $(CP) ./files/hostapd-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config \ ) - $(CP) ./files/wpa_supplicant-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config + $(CP) ./files/wpa_supplicant-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config endef TARGET_CPPFLAGS := \ diff --git a/package/network/services/hostapd/files/wpa_supplicant-mesh.config b/package/network/services/hostapd/files/wpa_supplicant-mesh.config deleted file mode 100644 index 36e29088c4..0000000000 --- a/package/network/services/hostapd/files/wpa_supplicant-mesh.config +++ /dev/null @@ -1,407 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for ndiswrapper -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -# CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - -# Driver interface for generic Linux wireless extensions -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Include client MLME (management frame processing) for test driver -# This can be used to test MLME operations in hostapd with the test interface. -# space. -#CONFIG_CLIENT_MLME=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -CONFIG_EAP_TLS=y - -# EAL-PEAP -CONFIG_EAP_PEAP=y - -# EAP-TTLS -CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# EAP-GTC -CONFIG_EAP_GTC=y - -# EAP-OTP -CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-PAX -#CONFIG_EAP_PAX=y - -# LEAP -CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -#CONFIG_EAP_SAKE=y - -# EAP-GPSK -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -CONFIG_WPS=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -#CONFIG_READLINE=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to -# save about 1 kB in code size when building only WPA-Personal (no EAP support) -# or 6 kB if building for WPA-Enterprise. -#CONFIG_NO_WPA2=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -#CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -#CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -#CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -# eloop_none = Empty template -#CONFIG_ELOOP=eloop - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -#CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -CONFIG_TLS=internal - -# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. -# You need CONFIG_TLS=gnutls for this to have any effect. Please note that -# even though the core GnuTLS library is released under LGPL, this extra -# library uses GPL and as such, the terms of GPL apply to the combination -# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not -# apply for distribution of the resulting binary. -#CONFIG_GNUTLS_EXTRA=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for old DBus control interface -# (fi.epitest.hostap.WPASupplicant) -#CONFIG_CTRL_IFACE_DBUS=y - -# Add support for new DBus control interface -# (fi.w1.hostap.wpa_supplicant1) -#CONFIG_CTRL_IFACE_DBUS_NEW=y - -# Add introspection support for new DBus control interface -#CONFIG_CTRL_IFACE_DBUS_INTRO=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -#CONFIG_DEBUG_FILE=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, comment out these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, comment out these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz - -CONFIG_NO_RANDOM_POOL=y -NEED_80211_COMMON=y - -CONFIG_IBSS_RSN=y - -CONFIG_MESH=y -CONFIG_SAE=y -CONFIG_AP=y -- 2.11.0