packages/net/xl2tpd: netifd support
authorjow <jow@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Sun, 1 Jul 2012 10:38:45 +0000 (10:38 +0000)
committerjow <jow@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Sun, 1 Jul 2012 10:38:45 +0000 (10:38 +0000)
This integrates xl2tpd suppport into netifd, based on what I saw for ppp and pptp.
I also changed the init script so that it makes sure that all modules needed for
kernel-mode l2tp support are loaded at the time that xl2tpd is started, as
otherwise xl2tpd falls back into using user-mode l2tp.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@32563 3c298f89-4303-0410-b956-a3cf2f4a3e73

net/xl2tpd/Makefile
net/xl2tpd/files/l2tp.sh
net/xl2tpd/files/xl2tpd.init

index 0119236..6d197d6 100644 (file)
@@ -61,8 +61,8 @@ define Package/xl2tpd/install
        $(INSTALL_DIR) $(1)/etc/ppp
        $(INSTALL_DATA) ./files/options.xl2tpd $(1)/etc/ppp/
 
-       $(INSTALL_DIR) $(1)/lib/network
-       $(INSTALL_DATA) ./files/l2tp.sh $(1)/lib/network
+       $(INSTALL_DIR) $(1)/lib/netifd/proto
+       $(INSTALL_BIN) ./files/l2tp.sh $(1)/lib/netifd/proto
 endef
 
 $(eval $(call BuildPackage,xl2tpd))
index f2a4d55..c51300a 100644 (file)
-find_route() {
-       ip route get $1 | sed -e 's/ /\n/g' | \
-            sed -ne '1p;/via/{N;p};/dev/{N;p};/src/{N;p};/mtu/{N;p}'
-}
-
-scan_l2tp() {
-       config_set "$1" device "l2tp-$1"
-}
-
-stop_interface_l2tp() {
-       local config="$1"
-       local lock="/var/lock/l2tp-${config}"
-       local optfile="/tmp/l2tp/options.${config}"
-       local l2tpcontrol=/var/run/xl2tpd/l2tp-control
-
-       lock "$lock"
+#!/bin/sh
 
-       [ -p ${l2tpcontrol} ] && echo "r l2tp-${config}" > ${l2tpcontrol}
-       rm -f ${optfile}
+[ -x /usr/sbin/xl2tpd ] || exit 0
 
-       for ip in $(uci_get_state network "$1" serv_addrs); do
-           ip route del "$ip" 2>/dev/null
-       done
+[ -n "$INCLUDE_ONLY" ] || {
+       . /lib/functions.sh
+       . ../netifd-proto.sh
+       init_proto "$@"
+}
 
-       lock -u "$lock"
+proto_l2tp_init_config() {
+       proto_config_add_string "username"
+       proto_config_add_string "password"
+       proto_config_add_string "keepalive"
+       proto_config_add_string "pppd_options"
+       proto_config_add_boolean "defaultroute"
+       proto_config_add_boolean "peerdns"
+       proto_config_add_boolean "ipv6"
+       proto_config_add_int "mtu"
+       proto_config_add_string "server"
+       available=1
+       no_device=1
 }
 
-setup_interface_l2tp() {
-       local config="$2"
-       local lock="/var/lock/l2tp-${config}"
+proto_l2tp_setup() {
+       local config="$1"
+       local iface="$2"
        local optfile="/tmp/l2tp/options.${config}"
 
-       lock "$lock"
+       local ip serv_addr server
+       json_get_var server server && {
+               for ip in $(resolveip -t 5 "$server"); do
+                       ( proto_add_host_dependency "$config" "$ip" )
+                       serv_addr=1
+               done
+       }
+       [ -n "$serv_addr" ] || {
+               echo "Could not resolve server address"
+               sleep 5
+               proto_setup_failed "$config"
+               exit 1
+       }
 
        if [ ! -p /var/run/xl2tpd/l2tp-control ]; then
-           /etc/init.d/xl2tpd start
+               /etc/init.d/xl2tpd start
        fi
-       
-       local device
-       config_get device "$config" device "l2tp-$config"
-
-       local server
-       config_get server "$config" server
-
-       local username
-       config_get username "$config" username
 
-       local password
-       config_get password "$config" password
-
-       local keepalive
-       config_get keepalive "$config" keepalive
-
-       local pppd_options
-       config_get pppd_options "$config" pppd_options
+       json_get_vars ipv6 peerdns defaultroute demand keepalive username password pppd_options
+       [ "$ipv6" = 1 ] || ipv6=""
+       [ "$peerdns" = 0 ] && peerdns="" || peerdns="1"
+       if [ "$defaultroute" = 1 ]; then
+               defaultroute="defaultroute replacedefaultroute";
+       else
+               defaultroute="nodefaultroute"
+       fi
+       if [ "${demand:-0}" -gt 0 ]; then
+               demand="precompiled-active-filter /etc/ppp/filter demand idle $demand"
+       else
+               demand="persist"
+       fi
 
-       local defaultroute
-       config_get_bool defaultroute "$config" defaultroute 1
-       [ "$defaultroute" -eq 1 ] && \
-               defaultroute="defaultroute replacedefaultroute" || defaultroute="nodefaultroute"
+       [ -n "$mtu" ] || json_get_var mtu mtu
 
        local interval="${keepalive##*[, ]}"
        [ "$interval" != "$keepalive" ] || interval=5
 
-       local dns
-       config_get dns "$config" dns
-
-       local has_dns=0
-       local peer_default=1
-       [ -n "$dns" ] && {
-               has_dns=1
-               peer_default=0
-       }
-
-       local peerdns
-       config_get_bool peerdns "$config" peerdns $peer_default
-
-       [ "$peerdns" -eq 1 ] && {
-               peerdns="usepeerdns"
-       } || {
-               peerdns=""
-               add_dns "$config" $dns
-       }
-
-       local ipv6
-       config_get ipv6 "$config" ipv6 1
-       [ "$ipv6" -eq 1 ] && ipv6="+ipv6" || ipv6=""
-
-       local serv_addrs=""
-       for ip in $(resolveip -t 3 "$server"); do
-               append serv_addrs "$ip"
-               ip route replace $(find_route $ip)
-       done
-       uci_toggle_state network "$config" serv_addrs "$serv_addrs"
-
-       # fix up the netmask
-       config_get netmask "$config" netmask
-       [ -z "$netmask" -o -z "$device" ] || ifconfig $device netmask $netmask
-
-       config_get mtu "$config" mtu
-
        mkdir -p /tmp/l2tp
 
        echo ${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} > "${optfile}"
-       echo "$peerdns" >> "${optfile}"
+       echo "${peerdns:+usepeerdns}" >> "${optfile}"
        echo "$defaultroute" >> "${optfile}"
        echo "${username:+user \"$username\" password \"$password\"}" >> "${optfile}"
        echo "ipparam \"$config\"" >> "${optfile}"
        echo "ifname \"l2tp-$config\"" >> "${optfile}"
+       echo "ip-up-script /lib/netifd/ppp-up" >> "${optfile}"
+       echo "ipv6-up-script /lib/netifd/ppp-up" >> "${optfile}"
+       echo "ip-down-script /lib/netifd/ppp-down" >> "${optfile}"
+       echo "ipv6-down-script /lib/netifd/ppp-down" >> "${optfile}"
        # Don't wait for LCP term responses; exit immediately when killed.
        echo "lcp-max-terminate 0" >> "${optfile}"
        echo "${ipv6} ${pppd_options}" >> "${optfile}"
+       echo "${mtu:+mtu $mtu mru $mtu}" >> "${optfile}"
 
-       xl2tpd-control remove l2tp-${config}
-       # Wait and ensure pppd has died.
-       while [ -d /sys/class/net/l2tp-${config} ]; do
-           sleep 1
-       done
-       
        xl2tpd-control add l2tp-${config} pppoptfile=${optfile} lns=${server} redial=yes redial timeout=20
        xl2tpd-control connect l2tp-${config}
+}
+
+proto_l2tp_teardown() {
+       local interface="$1"
+       local optfile="/tmp/l2tp/options.${interface}"
+
+       case "$ERROR" in
+               11|19)
+                       proto_notify_error "$interface" AUTH_FAILED
+                       proto_block_restart "$interface"
+               ;;
+               2)
+                       proto_notify_error "$interface" INVALID_OPTIONS
+                       proto_block_restart "$interface"
+               ;;
+       esac
+
+       xl2tpd-control disconnect l2tp-${interface}
+       # Wait for interface to go down
+        while [ -d /sys/class/net/l2tp-${interface} ]; do
+               sleep 1
+       done
+
+       xl2tpd-control remove l2tp-${interface}
+       rm -f ${optfile}
+}
 
-       lock -u "${lock}"
+[ -n "$INCLUDE_ONLY" ] || {
+       add_protocol l2tp
 }
index 22e8459..bdee615 100644 (file)
@@ -8,6 +8,16 @@ RUN_D=/var/run
 PID_F=$RUN_D/$BIN.pid
 
 start() {
+       # make sure kernel modules are loaded before starting xl2tpd, otherwise
+       # kernel-mode l2tp support won't work
+       local load
+       for module in slhc ppp_generic ppp_async pppox l2tp_core l2tp_netlink l2tp_ppp ; do
+               grep -q "$module" /proc/modules && continue
+               /sbin/insmod $module 2>&- >&-
+               load=1
+       done
+       [ "$load" = "1" ] && sleep 1
+
        mkdir -p $RUN_D/$BIN
        [ -f $DEFAULT ] && . $DEFAULT
        $BIN $OPTIONS