backfire: ar71xx: modify phy mask of the WP543 board (backport of r29328)

[10.03/openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-wp543.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c
index 0bf45ad..deae947 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c
@@ -1,7 +1,7 @@
 /*
- *  Compex WP543 board support
+ *  Compex WP543/WPJ543 board support
  *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -9,49 +9,30 @@
  *  by the Free Software Foundation.
  */
 
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/leds.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
-#include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
-#include <asm/mach-ar71xx/platform.h>
 
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-pb42-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define WP543_GPIO_SW6         2
 #define WP543_GPIO_LED_1       3
 #define WP543_GPIO_LED_2       4
 #define WP543_GPIO_LED_WLAN    5
 #define WP543_GPIO_LED_CONN    6
 #define WP543_GPIO_LED_DIAG    7
+#define WP543_GPIO_SW4         8
 
-static struct flash_platform_data wp543_flash_data = {
-       /* TODO: add partition map */
-};
+#define WP543_BUTTONS_POLL_INTERVAL    20
 
-static struct spi_board_info wp543_spi_info[] = {
-       {
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 25000000,
-               .modalias       = "m25p80",
-               .platform_data  = &wp543_flash_data,
-       }
-};
-
-static struct ar71xx_pci_irq wp543_pci_irqs[] __initdata = {
-       {
-               .slot   = 1,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV0,
-       }, {
-               .slot   = 1,
-               .pin    = 2,
-               .irq    = AR71XX_PCI_IRQ_DEV1,
-       }
-};
-
-static struct gpio_led wp543_leds_gpio[] = {
+static struct gpio_led wp543_leds_gpio[] __initdata = {
        {
                .name           = "wp543:green:led1",
                .gpio           = WP543_GPIO_LED_1,
@@ -75,31 +56,44 @@ static struct gpio_led wp543_leds_gpio[] = {
        }
 };
 
-static struct gpio_led_platform_data wp543_leds_gpio_data = {
-       .leds           = wp543_leds_gpio,
-       .num_leds       = ARRAY_SIZE(wp543_leds_gpio),
-};
-
-static struct platform_device wp543_leds_gpio_device = {
-       .name   = "leds-gpio",
-       .id     = -1,
-       .dev = {
-               .platform_data = &wp543_leds_gpio_data,
+static struct gpio_button wp543_gpio_buttons[] __initdata = {
+       {
+               .desc           = "sw6",
+               .type           = EV_KEY,
+               .code           = BTN_0,
+               .threshold      = 3,
+               .gpio           = WP543_GPIO_SW6,
+       }, {
+               .desc           = "sw4",
+               .type           = EV_KEY,
+               .code           = BTN_1,
+               .threshold      = 3,
+               .gpio           = WP543_GPIO_SW4,
        }
 };
 
 static void __init wp543_setup(void)
 {
-       ar71xx_add_device_spi(NULL, wp543_spi_info, ARRAY_SIZE(wp543_spi_info));
+       ar71xx_add_device_m25p80(NULL);
 
-       ar71xx_add_device_mdio(0xfffffff7);
-       ar71xx_add_device_eth(0, PHY_INTERFACE_MODE_MII, 0x00000008);
+       ar71xx_add_device_mdio(0xfffffff0);
+
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ar71xx_eth0_data.phy_mask = 0x0f;
+       ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC |
+                                    RESET_MODULE_GE0_PHY;
+       ar71xx_add_device_eth(0);
 
        ar71xx_add_device_usb();
 
-       ar71xx_pci_init(ARRAY_SIZE(wp543_pci_irqs), wp543_pci_irqs);
+       pb42_pci_init();
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
+                                       wp543_leds_gpio);
 
-       platform_device_register(&wp543_leds_gpio_device);
+       ar71xx_add_device_gpio_buttons(-1, WP543_BUTTONS_POLL_INTERVAL,
+                                       ARRAY_SIZE(wp543_gpio_buttons),
+                                       wp543_gpio_buttons);
 }
 
-MIPS_MACHINE(MACH_AR71XX_WP543, "Compex WP543", wp543_setup);
+MIPS_MACHINE(AR71XX_MACH_WP543, "WP543", "Compex WP543", wp543_setup);