[packages] babel: upstream release 1.1.99.1

[packages.git] / net / babel / files / babeld.config

diff --git a/net/babel/files/babeld.config b/net/babel/files/babeld.config
index 3b0fb38..d21a22b 100644 (file)
--- a/net/babel/files/babeld.config
+++ b/net/babel/files/babeld.config
@@ -1,2 +1,73 @@
-config babeld
-       #list 'interface' 'wlan'
+package babeld
+
+config general
+       # option 'multicast_address' 'ff02:0:0:0:0:0:1:6'
+       # option 'port' '6696'
+       # option 'state_file' '/var/lib/babel-state'
+       # option 'hello_interval' '4'
+       # option 'wired_hello_interval' '20'
+       # Enable  detection of idle networks.  This functonality is
+       # experimental, don't use it unless you know what you are doing.
+       ## option 'idle_hello_interval' '0'
+       # option 'diversity' '0,128'
+       # option 'kernel_priority' '0'
+       # Do not use this option unless you know what you are doing, as it can
+       # cause persistent route flapping.
+       ## option 'duplication_priority' '0'
+       # option 'carrier_sense' 'false'
+       # option 'assume_wireless' 'false'
+       # option 'no_split_horizon' 'false'
+       # option 'parasitic' 'false'
+       # option 'debug' '0'
+       # Listen for connections from a front-end, e.g. on port 33123.
+       ## option 'local_server' '33123'
+       # Keep unfeasible routes
+       ## option 'keep_unfeasible' 'false'
+       # Use the given kernel routing table for routes inserted by babeld.
+       ## option 'export_table' '0'
+       # Export routes from the given kernel routing table.
+       ## option 'import_table' '0'
+       # The configuration file is not necessary since you can do everything
+       # from this file.
+       # option 'conf_file' '/etc/babeld.conf'
+       # option 'log_file' '/var/log/babeld.log'
+
+# You can use aliases (like lan, wlan) or real names (like eth0.0).
+# If you use an alias, it must be already defined when babeld starts.
+# Otherwise, the name is taken literally and the interface can be
+# brought up later (useful for tunnels for instance).
+config interface wlan
+       # Remove this line to enable babeld on this interface
+       option 'ignore' 'true'
+       # option 'wired' 'auto'
+       # option 'link_quality' 'auto'
+       # option 'split_horizon' 'auto'
+       # The default is 96 for wired interfaces, and 256 for wireless ones
+       ## option 'rxcost' '256'
+       # The default is specified with the -h and -H command-line flags.
+       ## option 'hello_interval' '4'
+       # This can be set to a fairly large  value,  unless significant
+       # packet loss is expected.  The default is four times the hello
+       # interval.
+       ## option 'update_interval' '16'
+
+config interface lan
+       option 'ignore' 'true'
+
+# A filter consists in a type ('in', 'out' or 'redistribute'), an action
+# ('allow', 'deny' or 'metric xxx') and a set of selectors ('ip', 'eq',
+# etc.).  See /etc/babeld.conf for more details.
+# Here is a sample filter wich redistributes the default route if its
+# protocol number is "boot", e.g. when it installed by dhcp.  It is
+# disabled by default.
+config filter
+       option 'ignore' 'true'
+       # Type
+       option 'type' 'redistribute'
+       # Selectors: ip, eq, le, ge, neigh, id, proto, local, if
+       option 'ip' '0.0.0.0/0' 
+       option 'le' '0'
+       option 'proto' '3'
+       # Action 
+       option 'action' 'metric 128'
+