msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-12-21 23:08+0200\n" "PO-Revision-Date: 2012-08-10 05:20+0200\n" "Last-Translator: phantasm131 \n" "Language-Team: QQ Group:75543259\n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Pootle 2.0.6\n" msgid "(%d minute window, %d second interval)" msgstr "(%d分钟信息,%d秒刷新)" msgid "(%s available)" msgstr "(%s 可用)" msgid "(empty)" msgstr "(empty)" msgid "(no interfaces attached)" msgstr "(no interfaces attached)" msgid "-- Additional Field --" msgstr "-- Additional Field --" msgid "-- Please choose --" msgstr "-- 请选择 --" msgid "-- custom --" msgstr "-- 自定义 --" msgid "1 Minute Load:" msgstr "1分钟负载:" msgid "15 Minute Load:" msgstr "15分钟负载:" msgid "40MHz 2nd channel above" msgstr "40MHz HT40+" msgid "40MHz 2nd channel below" msgstr "40MHz HT40-" msgid "5 Minute Load:" msgstr "5分钟负载:" msgid "BSSID" msgstr "BSSID" msgid "DNS query port" msgstr "DNS query port" msgid "DNS server port" msgstr "DNS server port" msgid "" "DNS servers will be queried in the " "order of the resolvfile" msgstr "" "DNS servers will be queried in the " "order of the resolvfile" msgid "ESSID" msgstr "ESSID" msgid "IPv4-Address" msgstr "IPv4-地址" msgid "IPv4-Gateway" msgstr "IPv4-网关" msgid "IPv4-Netmask" msgstr "IPv4-子网掩码" msgid "" "IPv6-Address or Network " "(CIDR)" msgstr "" "IPv6-Address or Network " "(CIDR)" msgid "IPv6-Gateway" msgstr "IPv6-网关" msgid "LED Configuration" msgstr "LED配置" msgid "LED Name" msgstr "LED名称" msgid "MAC-Address" msgstr "MAC-地址" msgid "" "Max. DHCP leases" msgstr "" "Max. DHCP leases" msgid "" "Max. EDNS0 paket size" msgstr "" "Max. EDNS0 paket size" msgid "Max. concurrent queries" msgstr "Max. concurrent queries" msgid "APN" msgstr "APN" msgid "AR Support" msgstr "AR Support" msgid "ARP retry threshold" msgstr "ARP重试阈值" msgid "ATM Bridges" msgstr "ATM桥接" msgid "ATM Virtual Channel Identifier (VCI)" msgstr "ATM虚拟通道标识(VCI)" msgid "ATM Virtual Path Identifier (VPI)" msgstr "ATM虚拟路径标识(VPI)" msgid "" "ATM bridges expose encapsulated ethernet in AAL5 connections as virtual " "Linux network interfaces which can be used in conjunction with DHCP or PPP " "to dial into the provider network." msgstr "" "ATM bridges expose encapsulated ethernet in AAL5 connections as virtual " "Linux network interfaces which can be used in conjunction with DHCP or PPP " "to dial into the provider network." msgid "ATM device number" msgstr "ATM设备号码" msgid "Accept router advertisements" msgstr "接收路由通告" msgid "Access Concentrator" msgstr "接入集中器" msgid "Access Point" msgstr "接入点AP" msgid "Action" msgstr "动作" msgid "Actions" msgstr "动作" msgid "Activate this network" msgstr "Activate this network" msgid "Active IPv4-Routes" msgstr "活动的IPv4-链路" msgid "Active IPv6-Routes" msgstr "活动的IPv6-链路" msgid "Active Connections" msgstr "活动连接" msgid "Active Leases" msgstr "活动客户端" msgid "Ad-Hoc" msgstr "点对点Ad-Hoc" msgid "Add" msgstr "添加" msgid "Add local domain suffix to names served from hosts files" msgstr "Add local domain suffix to names served from hosts files" msgid "Add new interface..." msgstr "添加新接口..." msgid "Additional Hosts files" msgstr "Additional Hosts files" msgid "Address" msgstr "地址" msgid "Address to access local relay bridge" msgstr "接入本地中继桥的地址" msgid "Administration" msgstr "管理权" msgid "Advanced Settings" msgstr "高级设置" msgid "Advertise IPv6 on network" msgstr "在网络上通告IPv6" msgid "Advertised network ID" msgstr "通告的网络ID" msgid "Alert" msgstr "Alert" msgid "Allow SSH password authentication" msgstr "允许SSH密码验证" msgid "Allow all except listed" msgstr "仅允许列表外" msgid "Allow listed only" msgstr "仅允许列表内" msgid "Allow localhost" msgstr "Allow localhost" msgid "Allow remote hosts to connect to local SSH forwarded ports" msgstr "允许远程主机连接到本地SSH转发端口" msgid "Allow root logins with password" msgstr "root权限登录" msgid "Allow the root user to login with password" msgstr "允许root用户凭密码登录" msgid "" "Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services" msgstr "" "Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services" msgid "Allowed range is 1 to 65535" msgstr "Allowed range is 1 to 65535" msgid "An additional network will be created if you leave this unchecked." msgstr "An additional network will be created if you leave this unchecked." msgid "Antenna 1" msgstr "Antenna 1" msgid "Antenna 2" msgstr "Antenna 2" msgid "Any zone" msgstr "Any zone" msgid "Apply" msgstr "应用" msgid "Applying changes" msgstr "Applying changes" msgid "Assign interfaces..." msgstr "Assign interfaces..." msgid "Associated Stations" msgstr "已连接站点" msgid "Authentication" msgstr "认证" msgid "Authoritative" msgstr "Authoritative" msgid "Authorization Required" msgstr "需要授权" msgid "Auto Refresh" msgstr "自动刷新" msgid "Available" msgstr "可用" msgid "Available packages" msgstr "可用软件包" msgid "Average:" msgstr "平均:" msgid "BSSID" msgstr "BSSID" msgid "Back" msgstr "返回" msgid "Back to Overview" msgstr "返回至概况" msgid "Back to configuration" msgstr "Back to configuration" msgid "Back to overview" msgstr "返回至概况" msgid "Back to scan results" msgstr "返回至扫描结果" msgid "Background Scan" msgstr "Background Scan" msgid "Backup / Flash Firmware" msgstr "备份/升级" msgid "Backup / Restore" msgstr "备份/恢复" msgid "Backup file list" msgstr "Backup file list" msgid "Bad address specified!" msgstr "Bad address specified!" msgid "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " "defined backup patterns." msgstr "" "Below is the determined list of files to backup. It consists of changed " "configuration files marked by opkg, essential base files and the user " "defined backup patterns." msgid "Bit Rate" msgstr "传输速率" msgid "Bitrate" msgstr "传输速率" msgid "Bogus NX Domain Override" msgstr "Bogus NX Domain Override" msgid "Bridge" msgstr "桥接" msgid "Bridge interfaces" msgstr "桥接接口" msgid "Bridge unit number" msgstr "桥接号" msgid "Bring up on boot" msgstr "开机自动运行" msgid "Buffered" msgstr "已缓冲" msgid "Buttons" msgstr "按键" msgid "CPU" msgstr "CPU" msgid "CPU usage (%)" msgstr "CPU使用率(%)" msgid "Cached" msgstr "已缓存" msgid "Cancel" msgstr "取消" msgid "Chain" msgstr "Chain" msgid "Changes" msgstr "修改数" msgid "Changes applied." msgstr "Changes applied." msgid "Changes the administrator password for accessing the device" msgstr "修改访问设备的管理员密码" msgid "Channel" msgstr "信道" msgid "Check" msgstr "检查" msgid "Checksum" msgstr "校验值" msgid "" "Choose the firewall zone you want to assign to this interface. Select " "unspecified to remove the interface from the associated zone or " "fill out the create field to define a new zone and attach the " "interface to it." msgstr "此接口的防火墙区域。填写创建栏可新建防火墙区域。" msgid "" "Choose the network(s) you want to attach to this wireless interface or fill " "out the create field to define a new network." msgstr "此无线接口的网络。填写创建栏可新建网络。" msgid "Cipher" msgstr "算法" msgid "" "Click \"Generate archive\" to download a tar archive of the current " "configuration files. To reset the firmware to its initial state, click " "\"Perform reset\" (only possible with squashfs images)." msgstr "备份/恢复当前系统配置文件或重置OpenWrt(仅squashfs固件有效)。" msgid "Client" msgstr "客户端Client" msgid "Client ID to send when requesting DHCP" msgstr "请求DHCP时发送的客户ID" msgid "" "Close inactive connection after the given amount of seconds, use 0 to " "persist connection" msgstr "定时关闭非活动链接(秒),0为持续连接" msgid "Close list..." msgstr "Close list..." msgid "Collecting data..." msgstr "Collecting data..." msgid "Command" msgstr "Command" msgid "Common Configuration" msgstr "一般设置" msgid "Compression" msgstr "Compression" msgid "Configuration" msgstr "配置" msgid "Configuration / Apply" msgstr "Configuration / Apply" msgid "Configuration / Changes" msgstr "Configuration / Changes" msgid "Configuration / Revert" msgstr "Configuration / Revert" msgid "Configuration applied." msgstr "Configuration applied." msgid "Configuration files will be kept." msgstr "Configuration files will be kept." msgid "Configures this mount as overlay storage for block-extroot" msgstr "对于block-extroot则设置挂载到overlay存储" msgid "Confirmation" msgstr "确认密码" msgid "Connect" msgstr "连接" msgid "Connected" msgstr "已连接" msgid "Connection Limit" msgstr "Connection Limit" msgid "Connections" msgstr "链接" msgid "Country" msgstr "国家" msgid "Country Code" msgstr "国家代码" msgid "Cover the following interface" msgstr "Cover the following interface" msgid "Cover the following interfaces" msgstr "Cover the following interfaces" msgid "Create / Assign firewall-zone" msgstr "创建/分配 防火墙区域" msgid "Create Interface" msgstr "Create Interface" msgid "Create a bridge over multiple interfaces" msgstr "Create a bridge over multiple interfaces" msgid "Critical" msgstr "Critical" msgid "Cron Log Level" msgstr "Cron Log Level" msgid "Custom Interface" msgstr "自定义接口" msgid "" "Customizes the behaviour of the device LEDs if possible." msgstr "自定义LED的活动状态。" msgid "DHCP Leases" msgstr "DHCP分配" msgid "DHCP Server" msgstr "DHCP服务器" msgid "DHCP and DNS" msgstr "DHCP/DNS" msgid "DHCP client" msgstr "DHCP client" msgid "DHCP-Options" msgstr "DHCP-选项" msgid "DNS" msgstr "DNS" msgid "DNS forwardings" msgstr "DNS forwardings" msgid "Debug" msgstr "Debug" msgid "Default %d" msgstr "默认%d" msgid "Default gateway" msgstr "默认网关" msgid "Default state" msgstr "默认状态" msgid "Define a name for this network." msgstr "Define a name for this network." msgid "" "Define additional DHCP options, for example " "\"6,192.168.2.1,192.168.2.2\" which advertises different DNS " "servers to clients." msgstr "设置DHCP的附加选项。" msgid "Delete" msgstr "删除" msgid "Delete this interface" msgstr "Delete this interface" msgid "Delete this network" msgstr "Delete this network" msgid "Description" msgstr "描述" msgid "Design" msgstr "主题" msgid "Destination" msgstr "Destination" msgid "Device" msgstr "设备" msgid "Device Configuration" msgstr "设备配置" msgid "Diagnostics" msgstr "网络诊断" msgid "Directory" msgstr "Directory" msgid "Disable" msgstr "禁用" msgid "" "Disable DHCP for " "this interface." msgstr "" "禁用本接口的DHCP。" msgid "Disable DNS setup" msgstr "Disable DNS setup" msgid "Disable HW-Beacon timer" msgstr "Disable HW-Beacon timer" msgid "Disabled" msgstr "禁用" msgid "Discard upstream RFC1918 responses" msgstr "Discard upstream RFC1918 responses" msgid "Displaying only packages containing" msgstr "Displaying only packages containing" msgid "Distance Optimization" msgstr "距离优化" msgid "Distance to farthest network member in meters." msgstr "最远客户端的距离(米)。" msgid "Diversity" msgstr "分集" msgid "" "Dnsmasq is a combined DHCP-Server and DNS-" "Forwarder for NAT " "firewalls" msgstr "" "Dnsmasq is a combined DHCP-Server and DNS-" "Forwarder for NAT " "firewalls" msgid "Do not cache negative replies, e.g. for not existing domains" msgstr "Do not cache negative replies, e.g. for not existing domains" msgid "Do not forward requests that cannot be answered by public name servers" msgstr "Do not forward requests that cannot be answered by public name servers" msgid "Do not forward reverse lookups for local networks" msgstr "Do not forward reverse lookups for local networks" msgid "Do not send probe responses" msgstr "Do not send probe responses" msgid "Domain required" msgstr "Domain required" msgid "Domain whitelist" msgstr "Domain whitelist" msgid "" "Don't forward DNS-Requests without " "DNS-Name" msgstr "" "Don't forward DNS-Requests without " "DNS-Name" msgid "Download and install package" msgstr "下载并安装软件包" msgid "Download backup" msgstr "下载备份" msgid "Dropbear Instance" msgstr "Dropbear Instance" msgid "" "Dropbear offers SSH network shell access " "and an integrated SCP server" msgstr "Dropbear提供基于SSH的shell访问" msgid "Dynamic DHCP" msgstr "动态DHCP" msgid "Dynamic tunnel" msgstr "动态隧道" msgid "" "Dynamically allocate DHCP addresses for clients. If disabled, only clients " "having static leases will be served." msgstr "动态分配DHCP地址。" msgid "EAP-Method" msgstr "EAP-Method" msgid "Edit" msgstr "修改" msgid "Edit this interface" msgstr "Edit this interface" msgid "Edit this network" msgstr "Edit this network" msgid "Emergency" msgstr "Emergency" msgid "Enable" msgstr "启用" msgid "Enable STP" msgstr "开启STP" msgid "Enable HE.net dynamic endpoint update" msgstr "Enable HE.net dynamic endpoint update" msgid "Enable IPv6 negotiation on the PPP link" msgstr "在PPP链路上启用IPv6协商" msgid "Enable Jumbo Frame passthrough" msgstr "Enable Jumbo Frame passthrough" msgid "Enable TFTP server" msgstr "Enable TFTP server" msgid "Enable VLAN functionality" msgstr "Enable VLAN functionality" msgid "Enable builtin NTP server" msgstr "开启内置NTP服务器" msgid "Enable learning and aging" msgstr "Enable learning and aging" msgid "Enable this mount" msgstr "开启挂载mount" msgid "Enable this swap" msgstr "开启挂载swap" msgid "Enable/Disable" msgstr "启用/禁用" msgid "Enabled" msgstr "启用" msgid "Enables the Spanning Tree Protocol on this bridge" msgstr "在此桥接上启用生成协议树" msgid "Encapsulation mode" msgstr "Encapsulation mode" msgid "Encryption" msgstr "加密" msgid "Erasing..." msgstr "Erasing..." msgid "Error" msgstr "Error" msgid "Ethernet Adapter" msgstr "以太网适配器" msgid "Ethernet Switch" msgstr "以太网交换机" msgid "Expand hosts" msgstr "Expand hosts" msgid "Expires" msgstr "到期时间" msgid "" "Expiry time of leased addresses, minimum is 2 Minutes (2m)." msgstr "地址租期,最小2分钟(2m)。" msgid "External system log server" msgstr "External system log server" msgid "External system log server port" msgstr "External system log server port" msgid "Fast Frames" msgstr "Fast Frames" msgid "File" msgstr "文件" msgid "Filename of the boot image advertised to clients" msgstr "Filename of the boot image advertised to clients" msgid "Filesystem" msgstr "文件系统" msgid "Filter" msgstr "过滤器" msgid "Filter private" msgstr "Filter private" msgid "Filter useless" msgstr "Filter useless" msgid "Find and join network" msgstr "Find and join network" msgid "Find package" msgstr "查找软件包" msgid "Finish" msgstr "完成" msgid "Firewall" msgstr "防火墙" msgid "Firewall Settings" msgstr "防火墙设置" msgid "Firewall Status" msgstr "Firewall Status" msgid "Firmware Version" msgstr "固件版本" msgid "Fixed source port for outbound DNS queries" msgstr "Fixed source port for outbound DNS queries" msgid "Flags" msgstr "Flags" msgid "Flash Firmware" msgstr "升级固件" msgid "Flash image..." msgstr "刷新固件..." msgid "Flash new firmware image" msgstr "刷新固件" msgid "Flash operations" msgstr "刷新操作" msgid "Flashing..." msgstr "Flashing..." msgid "Force" msgstr "强制DHCP" msgid "Force CCMP (AES)" msgstr "Force CCMP (AES)" msgid "Force DHCP on this network even if another server is detected." msgstr "强制开启DHCP。" msgid "Force TKIP" msgstr "Force TKIP" msgid "Force TKIP and CCMP (AES)" msgstr "Force TKIP and CCMP (AES)" msgid "Forward DHCP traffic" msgstr "转发DHCP数据包" msgid "Forward broadcast traffic" msgstr "转发广播数据包" msgid "Forwarding mode" msgstr "转发模式" msgid "Fragmentation Threshold" msgstr "分片阈值" msgid "Frame Bursting" msgstr "Frame Bursting" msgid "Free" msgstr "空闲数" msgid "Free space" msgstr "空闲空间" msgid "Frequency Hopping" msgstr "Frequency Hopping" msgid "Gateway" msgstr "网关" msgid "Gateway ports" msgstr "网关端口" msgid "General Settings" msgstr "基本设置" msgid "General Setup" msgstr "基本设置" msgid "Generate archive" msgstr "生成备份" msgid "Given password confirmation did not match, password not changed!" msgstr "Given password confirmation did not match, password not changed!" msgid "Go to password configuration..." msgstr "跳转到密码配置页..." msgid "Go to relevant configuration page" msgstr "Go to relevant configuration page" msgid "HE.net password" msgstr "HE.net密码" msgid "HE.net user ID" msgstr "HE.net用户ID" msgid "HT capabilities" msgstr "HT capabilities" msgid "HT mode" msgstr "HT模式" msgid "Handler" msgstr "Handler" msgid "Hang Up" msgstr "挂起" msgid "" "Here you can configure the basic aspects of your device like its hostname or " "the timezone." msgstr "配置路由器的部分基础信息。" msgid "" "Here you can paste public SSH-Keys (one per line) for SSH public-key " "authentication." msgstr "SSH公共密钥认证(每行一个密钥)。" msgid "Hide ESSID" msgstr "隐藏ESSID" msgid "Host entries" msgstr "Host entries" msgid "Host expiry timeout" msgstr "Host expiry timeout" msgid "Host-IP or Network" msgstr "Host-IP or Network" msgid "Hostname" msgstr "主机名" msgid "Hostname to send when requesting DHCP" msgstr "请求DHCP时发送的主机名" msgid "Hostnames" msgstr "主机名" msgid "IP address" msgstr "IP地址" msgid "IPv4" msgstr "IPv4" msgid "IPv4 Firewall" msgstr "IPv4 Firewall" msgid "IPv4 WAN Status" msgstr "IPv4 WAN状态" msgid "IPv4 address" msgstr "IPv4地址" msgid "IPv4 and IPv6" msgstr "IPv4和IPv6" msgid "IPv4 broadcast" msgstr "IPv4广播" msgid "IPv4 gateway" msgstr "IPv4网关" msgid "IPv4 netmask" msgstr "IPv4子网掩码" msgid "IPv4 only" msgstr "仅IPv4" msgid "IPv4 prefix length" msgstr "IPv4地址前缀长度" msgid "IPv4-Address" msgstr "IPv4-地址" msgid "IPv6" msgstr "IPv6" msgid "IPv6 Firewall" msgstr "IPv6 Firewall" msgid "IPv6 WAN Status" msgstr "IPv6 WAN状态" msgid "IPv6 address" msgstr "IPv6地址" msgid "IPv6 gateway" msgstr "IPv6网关" msgid "IPv6 only" msgstr "仅IPv6" msgid "IPv6 prefix" msgstr "IPv6地址前缀" msgid "IPv6 prefix length" msgstr "IPv6地址前缀长度" msgid "IPv6-in-IPv4 (RFC4213)" msgstr "IPv6-in-IPv4 (RFC4213)" msgid "IPv6-over-IPv4 (6rd)" msgstr "IPv6-over-IPv4 (6rd)" msgid "IPv6-over-IPv4 (6to4)" msgstr "IPv6-over-IPv4 (6to4)" msgid "Identity" msgstr "鉴权" msgid "" "If specified, mount the device by its UUID instead of a fixed device node" msgstr "用UUID来挂载设备" msgid "" "If specified, mount the device by the partition label instead of a fixed " "device node" msgstr "用卷标来挂载设备" msgid "If unchecked, no default route is configured" msgstr "留空则不配置默认路由" msgid "If unchecked, the advertised DNS server addresses are ignored" msgstr "留空则忽略所通告的DNS服务器地址" msgid "" "If your physical memory is insufficient unused data can be temporarily " "swapped to a swap-device resulting in a higher amount of usable RAM. Be aware that swapping data is a very " "slow process as the swap-device cannot be accessed with the high datarates " "of the RAM." msgstr "如果物理内存不足,闲置数据可交换到swap设备暂存,以提高可用内存。" msgid "Ignore Hosts files" msgstr "Ignore Hosts files" msgid "Ignore interface" msgstr "关闭DHCP" msgid "Ignore resolve file" msgstr "Ignore resolve file" msgid "Image" msgstr "固件文件" msgid "In" msgstr "In" msgid "Inactivity timeout" msgstr "活动超时" msgid "Inbound:" msgstr "入站:" msgid "Info" msgstr "Info" msgid "Initscript" msgstr "启动脚本" msgid "Initscripts" msgstr "启动脚本" msgid "Install" msgstr "安装" msgid "Install package %q" msgstr "安装软件包%q" msgid "Install protocol extensions..." msgstr "Install protocol extensions..." msgid "Installed packages" msgstr "已安装软件包" msgid "Interface" msgstr "接口" msgid "Interface Configuration" msgstr "接口配置" msgid "Interface Overview" msgstr "接口总览" msgid "Interface is reconnecting..." msgstr "Interface is reconnecting..." msgid "Interface is shutting down..." msgstr "Interface is shutting down..." msgid "Interface not present or not connected yet." msgstr "Interface not present or not connected yet." msgid "Interface reconnected" msgstr "Interface reconnected" msgid "Interface shut down" msgstr "关闭接口" msgid "Interfaces" msgstr "接口" msgid "Invalid" msgstr "Invalid" msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed." msgstr "Invalid VLAN ID given! Only IDs between %d and %d are allowed." msgid "Invalid VLAN ID given! Only unique IDs are allowed" msgstr "Invalid VLAN ID given! Only unique IDs are allowed" msgid "Invalid username and/or password! Please try again." msgstr "Invalid username and/or password! Please try again." msgid "" "It appears that you try to flash an image that does not fit into the flash " "memory, please verify the image file!" msgstr "" "It appears that you try to flash an image that does not fit into the flash " "memory, please verify the image file!" msgid "Java Script required!" msgstr "Java Script required!" msgid "Join Network" msgstr "加入网络" msgid "Join Network: Settings" msgstr "加入网络:设置" msgid "Join Network: Wireless Scan" msgstr "加入网络:搜索无线" msgid "Keep settings" msgstr "保留配置" msgid "Kernel Log" msgstr "内核日志" msgid "Kernel Version" msgstr "内核版本" msgid "Key" msgstr "密码" msgid "Key #%d" msgstr "密码 #%d" msgid "Kill" msgstr "强制清理" msgid "L2TP" msgstr "L2TP" msgid "L2TP Server" msgstr "L2TP服务器" msgid "LCP echo failure threshold" msgstr "LCP响应故障阈值" msgid "LCP echo interval" msgstr "LCP响应间隔" msgid "LLC" msgstr "LLC" msgid "Label" msgstr "卷标" msgid "Language" msgstr "语言" msgid "Language and Style" msgstr "语言和界面" msgid "Lease validity time" msgstr "租用有效时间" msgid "Leasefile" msgstr "Leasefile" msgid "Leasetime" msgstr "租用时间" msgid "Leasetime remaining" msgstr "租约剩余" msgid "Leave empty to autodetect" msgstr "留空则自动探测" msgid "Leave empty to use the current WAN address" msgstr "留空则使用当前WAN地址" msgid "Legend:" msgstr "Legend:" msgid "Limit" msgstr "限制" msgid "Link On" msgstr "活动链接" msgid "" "List of DNS servers to forward " "requests to" msgstr "" "List of DNS servers to forward " "requests to" msgid "List of domains to allow RFC1918 responses for" msgstr "List of domains to allow RFC1918 responses for" msgid "List of hosts that supply bogus NX domain results" msgstr "List of hosts that supply bogus NX domain results" msgid "Listen only on the given interface or, if unspecified, on all" msgstr "监听指定的接口;未指定则监听全部" msgid "Listening port for inbound DNS queries" msgstr "Listening port for inbound DNS queries" msgid "Load" msgstr "负载" msgid "Load Average" msgstr "平均负载" msgid "Loading" msgstr "Loading" msgid "Local IPv4 address" msgstr "本地IPv4地址" msgid "Local IPv6 address" msgstr "本地IPv6地址" msgid "Local Startup" msgstr "本地启动脚本" msgid "Local Time" msgstr "本地时间" msgid "Local domain" msgstr "Local domain" msgid "" "Local domain specification. Names matching this domain are never forwared " "and resolved from DHCP or hosts files only" msgstr "" "Local domain specification. Names matching this domain are never forwared " "and resolved from DHCP or hosts files only" msgid "Local domain suffix appended to DHCP names and hosts file entries" msgstr "Local domain suffix appended to DHCP names and hosts file entries" msgid "Local server" msgstr "Local server" msgid "" "Localise hostname depending on the requesting subnet if multiple IPs are " "available" msgstr "" "Localise hostname depending on the requesting subnet if multiple IPs are " "available" msgid "Localise queries" msgstr "Localise queries" msgid "Locked to channel %d used by %s" msgstr "Locked to channel %d used by %s" msgid "Log output level" msgstr "Log output level" msgid "Log queries" msgstr "Log queries" msgid "Logging" msgstr "日志" msgid "Login" msgstr "登录" msgid "Logout" msgstr "退出" msgid "Lowest leased address as offset from the network address." msgstr "网址的分配基址。" msgid "MAC" msgstr "MAC" msgid "MAC Address" msgstr "MAC地址" msgid "MAC-Address" msgstr "MAC-地址" msgid "MAC-Address Filter" msgstr "MAC-地址过滤" msgid "MAC-Filter" msgstr "MAC-过滤" msgid "MAC-List" msgstr "MAC-列表" msgid "MTU" msgstr "MTU" msgid "Maximum Rate" msgstr "最高速率" msgid "Maximum allowed number of active DHCP leases" msgstr "Maximum allowed number of active DHCP leases" msgid "Maximum allowed number of concurrent DNS queries" msgstr "Maximum allowed number of concurrent DNS queries" msgid "Maximum allowed size of EDNS.0 UDP packets" msgstr "Maximum allowed size of EDNS.0 UDP packets" msgid "Maximum amount of seconds to wait for the modem to become ready" msgstr "modem就绪的最大等待时间(秒)" msgid "Maximum hold time" msgstr "Maximum hold time" msgid "Maximum number of leased addresses." msgstr "最大地址分配数量。" msgid "Memory" msgstr "内存" msgid "Memory usage (%)" msgstr "内存使用率(%)" msgid "Metric" msgstr "跃点数" msgid "Minimum Rate" msgstr "最低速率" msgid "Minimum hold time" msgstr "Minimum hold time" msgid "Missing protocol extension for proto %q" msgstr "Missing protocol extension for proto %q" msgid "Mode" msgstr "模式" msgid "Modem device" msgstr "Modem设备" msgid "Modem init timeout" msgstr "modem初始化超时" msgid "Monitor" msgstr "监听Monitor" msgid "Mount Entry" msgstr "挂载项" msgid "Mount Point" msgstr "挂载点" msgid "Mount Points" msgstr "挂载点" msgid "Mount Points - Mount Entry" msgstr "挂载点-Mount" msgid "Mount Points - Swap Entry" msgstr "挂载点-Swap" msgid "" "Mount Points define at which point a memory device will be attached to the " "filesystem" msgstr "配置存储设备挂载到文件系统中的位置和参数。" msgid "Mount options" msgstr "挂载选项" msgid "Mount point" msgstr "挂载点" msgid "Mounted file systems" msgstr "已挂载的文件系统" msgid "Move down" msgstr "Move down" msgid "Move up" msgstr "Move up" msgid "Multicast Rate" msgstr "组播速率" msgid "Multicast address" msgstr "组播地址" msgid "NAS ID" msgstr "NAS ID" msgid "NTP server candidates" msgstr "候选NTP服务器" msgid "Name" msgstr "名称" msgid "Name of the new interface" msgstr "Name of the new interface" msgid "Name of the new network" msgstr "Name of the new network" msgid "Navigation" msgstr "Navigation" msgid "Netmask" msgstr "子网掩码" msgid "Network" msgstr "网络" msgid "Network Utilities" msgstr "网络工具" msgid "Network boot image" msgstr "Network boot image" msgid "Network without interfaces." msgstr "Network without interfaces." msgid "Next »" msgstr "下一步 »" msgid "No DHCP Server configured for this interface" msgstr "No DHCP Server configured for this interface" msgid "No chains in this table" msgstr "No chains in this table" msgid "No files found" msgstr "No files found" msgid "No information available" msgstr "No information available" msgid "No negative cache" msgstr "No negative cache" msgid "No network configured on this device" msgstr "No network configured on this device" msgid "No network name specified" msgstr "No network name specified" msgid "No package lists available" msgstr "No package lists available" msgid "No password set!" msgstr "未设置密码!" msgid "No rules in this chain" msgstr "No rules in this chain" msgid "No zone assigned" msgstr "No zone assigned" msgid "Noise" msgstr "噪声" msgid "Noise:" msgstr "噪声:" msgid "None" msgstr "None" msgid "Normal" msgstr "Normal" msgid "Not associated" msgstr "Not associated" msgid "Not connected" msgstr "Not connected" msgid "Note: Configuration files will be erased." msgstr "Note: Configuration files will be erased." msgid "Notice" msgstr "Notice" msgid "OK" msgstr "OK" msgid "OPKG-Configuration" msgstr "OPKG-配置" msgid "Off-State Delay" msgstr "Off-State Delay" msgid "" "On this page you can configure the network interfaces. You can bridge " "several interfaces by ticking the \"bridge interfaces\" field and enter the " "names of several network interfaces separated by spaces. You can also use " "VLAN notation " "INTERFACE.VLANNR (e.g.: " "eth0.1)." msgstr "配置网络接口信息。" msgid "On-State Delay" msgstr "On-State Delay" msgid "One or more fields contain invalid values!" msgstr "One or more fields contain invalid values!" msgid "One or more required fields have no value!" msgstr "One or more required fields have no value!" msgid "Open" msgstr "开启" msgid "Open list..." msgstr "Open list..." msgid "Option changed" msgstr "Option changed" msgid "Option removed" msgstr "Option removed" msgid "Options" msgstr "Options" msgid "Other:" msgstr "其余:" msgid "Out" msgstr "Out" msgid "Outbound:" msgstr "出站:" msgid "Outdoor Channels" msgstr "Outdoor Channels" msgid "Override MAC address" msgstr "更新MAC地址" msgid "Override MTU" msgstr "更新MTU" msgid "Override the gateway in DHCP responses" msgstr "更新网关" msgid "" "Override the netmask sent to clients. Normally it is calculated from the " "subnet that is served." msgstr "更新子网掩码。" msgid "Override the table used for internal routes" msgstr "Override the table used for internal routes" msgid "Overview" msgstr "总览" msgid "Owner" msgstr "Owner" msgid "PAP/CHAP password" msgstr "PAP/CHAP密码" msgid "PAP/CHAP username" msgstr "PAP/CHAP用户名" msgid "PID" msgstr "PID" msgid "PIN" msgstr "PIN" msgid "PPP" msgstr "PPP" msgid "PPPoA Encapsulation" msgstr "PPPoA封包" msgid "PPPoATM" msgstr "PPPoATM" msgid "PPPoE" msgstr "PPPoE" msgid "PPtP" msgstr "PPtP" msgid "Package libiwinfo required!" msgstr "Package libiwinfo required!" msgid "Package lists are older than 24 hours" msgstr "Package lists are older than 24 hours" msgid "Package name" msgstr "软件包名称" msgid "Packets" msgstr "Packets" msgid "Part of zone %q" msgstr "区域 %q" msgid "Password" msgstr "密码" msgid "Password authentication" msgstr "密码验证" msgid "Password of Private Key" msgstr "私有密钥" msgid "Password successfully changed!" msgstr "Password successfully changed!" msgid "Path to CA-Certificate" msgstr "Path to CA-Certificate" msgid "Path to Client-Certificate" msgstr "Path to Client-Certificate" msgid "Path to Private Key" msgstr "Path to Private Key" msgid "Path to executable which handles the button event" msgstr "Path to executable which handles the button event" msgid "Peak:" msgstr "峰值:" msgid "Perform reboot" msgstr "执行重启" msgid "Perform reset" msgstr "执行复位" msgid "Phy Rate:" msgstr "速率:" msgid "Physical Settings" msgstr "物理设置" msgid "Pkts." msgstr "Pkts." msgid "Please enter your username and password." msgstr "请输入用户名和密码。" msgid "Please wait: Device rebooting..." msgstr "Please wait: Device rebooting..." msgid "Policy" msgstr "Policy" msgid "Port" msgstr "端口" msgid "Port %d" msgstr "Port %d" msgid "Port %d is untagged in multiple VLANs!" msgstr "Port %d is untagged in multiple VLANs!" msgid "" "Presume peer to be dead after given amount of LCP echo failures, use 0 to " "ignore failures" msgstr "在指定数量的LCP响应故障后假定链路已断开,0为忽略故障" msgid "Prevents client-to-client communication" msgstr "Prevents client-to-client communication" msgid "Proceed" msgstr "执行" msgid "Processes" msgstr "系统进程" msgid "Prot." msgstr "Prot." msgid "Protocol" msgstr "协议" msgid "Protocol family" msgstr "Protocol family" msgid "Protocol of the new interface" msgstr "Protocol of the new interface" msgid "Protocol support is not installed" msgstr "Protocol support is not installed" msgid "Provide new network" msgstr "Provide new network" msgid "Pseudo Ad-Hoc (ahdemo)" msgstr "伪装Ad-Hoc(ahdemo)" msgid "RTS/CTS Threshold" msgstr "RTS/CTS阈值" msgid "RX" msgstr "接收" msgid "RX Rate" msgstr "接收速率" msgid "Radius-Accounting-Port" msgstr "Radius-Accounting-Port" msgid "Radius-Accounting-Secret" msgstr "Radius-Accounting-Secret" msgid "Radius-Accounting-Server" msgstr "Radius-Accounting-Server" msgid "Radius-Authentication-Port" msgstr "Radius-Authentication-Port" msgid "Radius-Authentication-Secret" msgstr "Radius-Authentication-Secret" msgid "Radius-Authentication-Server" msgstr "Radius-Authentication-Server" msgid "" "Read /etc/ethers to configure the DHCP-Server" msgstr "" "Read /etc/ethers to configure the DHCP-Server" msgid "" "Really delete this interface? The deletion cannot be undone!\\nYou might " "lose access to this device if you are connected via this interface." msgstr "" "Really delete this interface? The deletion cannot be undone!\n" "You might lose access to this device if you are connected via this " "interface." msgid "" "Really delete this wireless network? The deletion cannot be undone!\\nYou " "might lose access to this device if you are connected via this network." msgstr "" "Really delete this wireless network? The deletion cannot be undone!\n" "You might lose access to this device if you are connected via this network." msgid "Really reset all changes?" msgstr "Really reset all changes?" msgid "" "Really shutdown interface \"%s\" ?\\nYou might lose access to this device if " "you are connected via this interface." msgstr "" "Really shutdown interface \"%s\" ?\n" "You might lose access to this device if you are connected via this " "interface." msgid "" "Really shutdown network ?\\nYou might lose access to this device if you are " "connected via this interface." msgstr "" "Really shutdown network ?\n" "You might lose access to this device if you are connected via this " "interface." msgid "Really switch protocol?" msgstr "确定要切换协议?" msgid "Realtime Connections" msgstr "实时连接" msgid "Realtime Graphs" msgstr "实时信息" msgid "Realtime Load" msgstr "实时负载" msgid "Realtime Traffic" msgstr "实时流量" msgid "Realtime Wireless" msgstr "实时无线" msgid "Rebind protection" msgstr "Rebind protection" msgid "Reboot" msgstr "重启" msgid "Rebooting..." msgstr "Rebooting..." msgid "Reboots the operating system of your device" msgstr "重启OpenWrt" msgid "Receive" msgstr "接收" msgid "Receiver Antenna" msgstr "Receiver Antenna" msgid "Reconnect this interface" msgstr "Reconnect this interface" msgid "Reconnecting interface" msgstr "Reconnecting interface" msgid "References" msgstr "References" msgid "Regulatory Domain" msgstr "Regulatory Domain" msgid "Relay" msgstr "Relay" msgid "Relay Bridge" msgstr "Relay Bridge" msgid "Relay between networks" msgstr "网络间中继" msgid "Relay bridge" msgstr "Relay bridge" msgid "Remote IPv4 address" msgstr "远程IPv4地址" msgid "Remove" msgstr "移除" msgid "Repeat scan" msgstr "重新扫描" msgid "Replace entry" msgstr "重置条目" msgid "Replace wireless configuration" msgstr "Replace wireless configuration" msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3" msgstr "某些ISP需要" msgid "Reset" msgstr "复位" msgid "Reset Counters" msgstr "Reset Counters" msgid "Reset to defaults" msgstr "复位系统" msgid "Resolv and Hosts Files" msgstr "Resolv and Hosts Files" msgid "Resolve file" msgstr "Resolve file" msgid "Restart" msgstr "重启" msgid "Restart Firewall" msgstr "Restart Firewall" msgid "Restore backup" msgstr "恢复配置" msgid "Reveal/hide password" msgstr "Reveal/hide password" msgid "Revert" msgstr "放弃" msgid "Root" msgstr "Root" msgid "Root directory for files served via TFTP" msgstr "Root directory for files served via TFTP" msgid "Router Model" msgstr "路由型号" msgid "Router Name" msgstr "系统名称" msgid "Router Password" msgstr "路由密码" msgid "Routes" msgstr "路由表" msgid "" "Routes specify over which interface and gateway a certain host or network " "can be reached." msgstr "路由表描述了数据包的可达路径。" msgid "Rule #" msgstr "Rule #" msgid "Run a filesystem check before mounting the device" msgstr "挂载设备前运行文件系统检查" msgid "Run filesystem check" msgstr "文件系统检查" msgid "SSH Access" msgstr "SSH访问" msgid "SSH-Keys" msgstr "SSH-密钥" msgid "SSID" msgstr "SSID" msgid "Save" msgstr "保存" msgid "Save & Apply" msgstr "保存&应用" msgid "Save & Apply" msgstr "保存&应用" msgid "Scan" msgstr "搜索" msgid "Scheduled Tasks" msgstr "计划任务" msgid "Section added" msgstr "Section added" msgid "Section removed" msgstr "Section removed" msgid "See \"mount\" manpage for details" msgstr "google:\"mount\"" msgid "" "Send LCP echo requests at the given interval in seconds, only effective in " "conjunction with failure threshold" msgstr "定时发送LCP响应(秒)" msgid "Send router solicitations" msgstr "发送路由请求" msgid "Separate Clients" msgstr "隔离客户端" msgid "Separate WDS" msgstr "隔离WDS" msgid "Server Settings" msgstr "Server Settings" msgid "Service Name" msgstr "服务名" msgid "Service Type" msgstr "服务类型" msgid "Services" msgstr "服务" msgid "Setup DHCP Server" msgstr "Setup DHCP Server" msgid "Setup Time Synchronization" msgstr "Setup Time Synchronization" msgid "Show current backup file list" msgstr "Show current backup file list" msgid "Shutdown this interface" msgstr "Shutdown this interface" msgid "Shutdown this network" msgstr "Shutdown this network" msgid "Signal" msgstr "信号" msgid "Signal:" msgstr "信号:" msgid "Size" msgstr "大小" msgid "Skip" msgstr "跳过" msgid "Skip to content" msgstr "Skip to content" msgid "Skip to navigation" msgstr "Skip to navigation" msgid "Slot time" msgstr "时隙" msgid "Software" msgstr "软件包" msgid "Some fields are invalid, cannot save values!" msgstr "Some fields are invalid, cannot save values!" msgid "" "Sorry, there is no sysupgrade support present, a new firmware image must be " "flashed manually. Please refer to the OpenWrt wiki for device specific " "install instructions." msgstr "" "Sorry, there is no sysupgrade support present, a new firmware image must be " "flashed manually. Please refer to the OpenWrt wiki for device specific " "install instructions." msgid "Sort" msgstr "排序" msgid "Source" msgstr "Source" msgid "Specifies the advertised preferred prefix lifetime in seconds" msgstr "Specifies the advertised preferred prefix lifetime in seconds" msgid "Specifies the advertised valid prefix lifetime in seconds" msgstr "Specifies the advertised valid prefix lifetime in seconds" msgid "Specifies the button state to handle" msgstr "Specifies the button state to handle" msgid "Specifies the directory the device is attached to" msgstr "指定设备的挂载目录" msgid "Specifies the listening port of this Dropbear instance" msgstr "指定此Dropbear的监听端口" msgid "" "Specifies the maximum amount of failed ARP requests until hosts are presumed " "to be dead" msgstr "指定假设主机已丢失的最大失败ARP请求数" msgid "" "Specifies the maximum amount of seconds after which hosts are presumed to be " "dead" msgstr "指定假设主机已丢失的最大时间(秒)" msgid "Specify the secret encryption key here." msgstr "Specify the secret encryption key here." msgid "Start" msgstr "开始" msgid "Start priority" msgstr "启动优先级" msgid "Startup" msgstr "启动项" msgid "Static IPv4 Routes" msgstr "静态IPv4路由" msgid "Static IPv6 Routes" msgstr "静态IPv6路由" msgid "Static Leases" msgstr "Static Leases" msgid "Static Routes" msgstr "静态路由" msgid "Static WDS" msgstr "静态WDS" msgid "Static address" msgstr "Static address" msgid "" "Static leases are used to assign fixed IP addresses and symbolic hostnames " "to DHCP clients. They are also required for non-dynamic interface " "configurations where only hosts with a corresponding lease are served." msgstr "" "Static leases are used to assign fixed IP addresses and symbolic hostnames " "to DHCP clients. They are also required for non-dynamic interface " "configurations where only hosts with a corresponding lease are served." msgid "Status" msgstr "状态" msgid "Stop" msgstr "关闭" msgid "Strict order" msgstr "Strict order" msgid "Submit" msgstr "提交" msgid "Swap Entry" msgstr "Swap项" msgid "Switch" msgstr "交换机" msgid "Switch %q" msgstr "Switch %q" msgid "Switch %q (%s)" msgstr "Switch %q (%s)" msgid "Switch protocol" msgstr "切换协议" msgid "Sync with browser" msgstr "同步浏览器时间" msgid "Synchronizing..." msgstr "Synchronizing..." msgid "System" msgstr "系统" msgid "System Log" msgstr "系统日志" msgid "System Properties" msgstr "系统属性" msgid "System log buffer size" msgstr "System log buffer size" msgid "TCP:" msgstr "TCP:" msgid "TFTP Settings" msgstr "TFTP Settings" msgid "TFTP server root" msgstr "TFTP server root" msgid "TX" msgstr "发送" msgid "TX Rate" msgstr "发送速率" msgid "Table" msgstr "Table" msgid "Target" msgstr "Target" msgid "Terminate" msgstr "终止" msgid "" "The Device Configuration section covers physical settings of the " "radio hardware such as channel, transmit power or antenna selection which is " "shared among all defined wireless networks (if the radio hardware is multi-" "SSID capable). Per network settings like encryption or operation mode are " "grouped in the Interface Configuration." msgstr "配置无线模块的软硬件参数。" msgid "" "The libiwinfo-lua package is not installed. You must install this " "component for working wireless configuration!" msgstr "" "The libiwinfo-lua package is not installed. You must install this " "component for working wireless configuration!" msgid "" "The IPv6 prefix assigned to the provider, usually ends with ::" msgstr "" "The IPv6 prefix assigned to the provider, usually ends with ::" msgid "" "The allowed characters are: A-Z, a-z, 0-9 and _" msgstr "" "The allowed characters are: A-Z, a-z, 0-9 and _" msgid "" "The device file of the memory or partition (e.g." " /dev/sda1)" msgstr "存储器或分区的设备文件" msgid "" "The filesystem that was used to format the memory (e.g. ext3)" msgstr "格式化存储器的文件系统" msgid "" "The flash image was uploaded. Below is the checksum and file size listed, " "compare them with the original file to ensure data integrity.
Click " "\"Proceed\" below to start the flash procedure." msgstr "固件已上传,请注意核对文件大小和校验值!
刷新过程切勿断电!" msgid "The following changes have been committed" msgstr "The following changes have been committed" msgid "The following changes have been reverted" msgstr "The following changes have been reverted" msgid "The following rules are currently active on this system." msgstr "系统中的活跃连接。" msgid "The given network name is not unique" msgstr "The given network name is not unique" msgid "" "The hardware is not multi-SSID capable and existing configuration will be " "replaced if you proceed." msgstr "" "The hardware is not multi-SSID capable and existing configuration will be " "replaced if you proceed." msgid "" "The length of the IPv4 prefix in bits, the remainder is used in the IPv6 " "addresses." msgstr "" "The length of the IPv4 prefix in bits, the remainder is used in the IPv6 " "addresses." msgid "The length of the IPv6 prefix in bits" msgstr "The length of the IPv6 prefix in bits" msgid "" "The network ports on this device can be combined to several VLANs in which computers can " "communicate directly with each other. VLANs are often used to separate different network " "segments. Often there is by default one Uplink port for a connection to the " "next greater network like the internet and other ports for a local network." msgstr "" "The network ports on this device can be combined to several VLANs in which computers can " "communicate directly with each other. VLANs are often used to separate different network segments. " "Often there is by default one Uplink port for a connection to the next " "greater network like the internet and other ports for a local network." msgid "The selected protocol needs a device assigned" msgstr "The selected protocol needs a device assigned" msgid "" "The system is erasing the configuration partition now and will reboot itself " "when finished." msgstr "" "The system is erasing the configuration partition now and will reboot itself " "when finished." msgid "" "The system is flashing now.
DO NOT POWER OFF THE DEVICE!
Wait a " "few minutes until you try to reconnect. It might be necessary to renew the " "address of your computer to reach the device again, depending on your " "settings." msgstr "正在刷新系统...
切勿关闭电源! DO NOT POWER OFF THE DEVICE!" msgid "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgstr "" "The uploaded image file does not contain a supported format. Make sure that " "you choose the generic image format for your platform." msgid "There are no active leases." msgstr "There are no active leases." msgid "There are no pending changes to apply!" msgstr "There are no pending changes to apply!" msgid "There are no pending changes to revert!" msgstr "There are no pending changes to revert!" msgid "There are no pending changes!" msgstr "There are no pending changes!" msgid "" "There is no device assigned yet, please attach a network device in the " "\"Physical Settings\" tab" msgstr "" "There is no device assigned yet, please attach a network device in the " "\"Physical Settings\" tab" msgid "" "There is no password set on this router. Please configure a root password to " "protect the web interface and enable SSH." msgstr "尚未设置密码。请为root用户设置密码以保护路由器并开启SSH。" msgid "This IPv4 address of the relay" msgstr "This IPv4 address of the relay" msgid "" "This is a list of shell glob patterns for matching files and directories to " "include during sysupgrade. Modified files in /etc/config/ and certain other " "configurations are automatically preserved." msgstr "" "This is a list of shell glob patterns for matching files and directories to " "include during sysupgrade. Modified files in /etc/config/ and certain other " "configurations are automatically preserved." msgid "This is the 32 byte hex encoded user ID, not the login name" msgstr "This is the 32 byte hex encoded user ID, not the login name" msgid "" "This is the content of /etc/rc.local. Insert your own commands here (in " "front of 'exit 0') to execute them at the end of the boot process." msgstr "启动脚本插入到'exit 0'之前即可随系统启动运行。" msgid "" "This is the local endpoint address assigned by the tunnel broker, it usually " "ends with :2" msgstr "" "This is the local endpoint address assigned by the tunnel broker, it usually " "ends with :2" msgid "" "This is the only DHCP in the local network" msgstr "" "This is the only DHCP in the local network" msgid "This is the system crontab in which scheduled tasks can be defined." msgstr "自定义系统crontab中的计划任务。" msgid "" "This is usually the address of the nearest PoP operated by the tunnel broker" msgstr "" "This is usually the address of the nearest PoP operated by the tunnel broker" msgid "" "This list gives an overview over currently running system processes and " "their status." msgstr "系统中正在运行的进程和其状态信息。" msgid "This page allows the configuration of custom button actions" msgstr "自定义按键动作。" msgid "This page gives an overview over currently active network connections." msgstr "活跃的网络连接概况。" msgid "This section contains no values yet" msgstr "This section contains no values yet" msgid "Time Synchronization" msgstr "时间同步" msgid "Time Synchronization is not configured yet." msgstr "Time Synchronization is not configured yet." msgid "Timezone" msgstr "时区" msgid "" "To restore configuration files, you can upload a previously generated backup " "archive here." msgstr "上传备份存档以恢复配置。" msgid "Total Available" msgstr "可用数" msgid "Traffic" msgstr "流量" msgid "Transfer" msgstr "传输" msgid "Transmission Rate" msgstr "发送速率" msgid "Transmit" msgstr "发送" msgid "Transmit Power" msgstr "发射功率" msgid "Transmitter Antenna" msgstr "Transmitter Antenna" msgid "Trigger" msgstr "触发" msgid "Trigger Mode" msgstr "触发模式" msgid "Tunnel ID" msgstr "隧道ID" msgid "Tunnel Interface" msgstr "Tunnel Interface" msgid "Turbo Mode" msgstr "Turbo Mode" msgid "Tx-Power" msgstr "传输功率" msgid "Type" msgstr "类型" msgid "UDP:" msgstr "UDP:" msgid "UMTS/GPRS/EV-DO" msgstr "UMTS/GPRS/EV-DO" msgid "USB Device" msgstr "USB设备" msgid "UUID" msgstr "UUID" msgid "Unknown" msgstr "Unknown" msgid "Unknown Error, password not changed!" msgstr "Unknown Error, password not changed!" msgid "Unmanaged" msgstr "Unmanaged" msgid "Unsaved Changes" msgstr "未保存的配置" msgid "Unsupported protocol type." msgstr "Unsupported protocol type." msgid "Update lists" msgstr "刷新列表" msgid "" "Upload a sysupgrade-compatible image here to replace the running firmware. " "Check \"Keep settings\" to retain the current configuration (requires an " "OpenWrt compatible firmware image)." msgstr "上传兼容的sysupgrade固件以刷新当前系统。" msgid "Upload archive..." msgstr "上传备份..." msgid "Uploaded File" msgstr "上传的文件" msgid "Uptime" msgstr "运行时间" msgid "Use /etc/ethers" msgstr "Use /etc/ethers" msgid "Use DHCP gateway" msgstr "使用DHCP网关" msgid "Use DNS servers advertised by peer" msgstr "使用端局通告的DNS服务器" msgid "Use ISO/IEC 3166 alpha2 country codes." msgstr "参考ISO/IEC 3166 alpha2国家代码。" msgid "Use MTU on tunnel interface" msgstr "隧道接口的MTU" msgid "Use TTL on tunnel interface" msgstr "隧道接口的TTL" msgid "Use as root filesystem" msgstr "挂载到根文件系统" msgid "Use broadcast flag" msgstr "使用广播标签" msgid "Use custom DNS servers" msgstr "使用自定义的DNS服务器" msgid "Use default gateway" msgstr "使用默认网关" msgid "Use gateway metric" msgstr "使用网关跃点" msgid "Use preferred lifetime" msgstr "使用首选生存时间" msgid "Use routing table" msgstr "Use routing table" msgid "" "Use the Add Button to add a new lease entry. The MAC-Address indentifies the host, the IPv4-Address specifies to the fixed " "address to use and the Hostname is assigned as symbolic name to the " "requesting host." msgstr "" "Use the Add Button to add a new lease entry. The MAC-Address indentifies the host, the IPv4-Address specifies to the fixed " "address to use and the Hostname is assigned as symbolic name to the " "requesting host." msgid "Use valid lifetime" msgstr "使用有效生存时间" msgid "Used" msgstr "已用" msgid "Used Key Slot" msgstr "启用密码组" msgid "Username" msgstr "用户名" msgid "VC-Mux" msgstr "VC-Mux" msgid "VLAN Interface" msgstr "VLAN接口" msgid "VLANs on %q" msgstr "VLANs on %q" msgid "VLANs on %q (%s)" msgstr "VLANs on %q (%s)" msgid "VPN Server" msgstr "VPN服务器" msgid "Vendor Class to send when requesting DHCP" msgstr "请求DHCP时发送的Vendor Class" msgid "Verify" msgstr "验证" msgid "Version" msgstr "版本" msgid "WDS" msgstr "WDS" msgid "WEP Open System" msgstr "WEP Open System" msgid "WEP Shared Key" msgstr "WEP Shared Key" msgid "WEP passphrase" msgstr "WEP passphrase" msgid "WMM Mode" msgstr "WMM Mode" msgid "WPA passphrase" msgstr "WPA passphrase" msgid "" "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " "and ad-hoc mode) to be installed." msgstr "" "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " "and ad-hoc mode) to be installed." msgid "Waiting for changes to be applied..." msgstr "Waiting for changes to be applied..." msgid "Waiting for command to complete..." msgstr "Waiting for command to complete..." msgid "Waiting for router..." msgstr "Waiting for router..." msgid "Warning" msgstr "Warning" msgid "Warning: There are unsaved changes that will be lost while rebooting!" msgstr "Warning: There are unsaved changes that will be lost while rebooting!" msgid "Wifi" msgstr "无线" msgid "Wireless" msgstr "无线" msgid "Wireless Adapter" msgstr "无线适配器" msgid "Wireless Network" msgstr "无线网络" msgid "Wireless Overview" msgstr "无线概况" msgid "Wireless Security" msgstr "无线安全" msgid "Wireless is disabled or not associated" msgstr "Wireless is disabled or not associated" msgid "Wireless is restarting..." msgstr "Wireless is restarting..." msgid "Wireless network is disabled" msgstr "无线已禁用" msgid "Wireless network is enabled" msgstr "无线已启用" msgid "Wireless restarted" msgstr "Wireless restarted" msgid "Wireless shut down" msgstr "Wireless shut down" msgid "Write received DNS requests to syslog" msgstr "Write received DNS requests to syslog" msgid "XR Support" msgstr "XR Support" msgid "" "You can enable or disable installed init scripts here. Changes will applied " "after a device reboot.
Warning: If you disable essential init " "scripts like \"network\", your device might become inaccesable!" msgstr "启用或禁用已安装的启动脚本。" msgid "" "You must enable Java Script in your browser or LuCI will not work properly." msgstr "" "You must enable Java Script in your browser or LuCI will not work properly." msgid "any" msgstr "any" msgid "auto" msgstr "auto" msgid "bridged" msgstr "bridged" msgid "create:" msgstr "创建:" msgid "creates a bridge over specified interface(s)" msgstr "为指定接口创建桥接" msgid "disable" msgstr "禁用" msgid "expired" msgstr "expired" msgid "" "file where given DHCP-leases will be stored" msgstr "" "file where given DHCP-leases will be stored" msgid "forward" msgstr "转发" msgid "help" msgstr "help" msgid "if target is a network" msgstr "if target is a network" msgid "input" msgstr "输入" msgid "local DNS file" msgstr "local DNS file" msgid "no" msgstr "no" msgid "none" msgstr "none" msgid "off" msgstr "off" msgid "on" msgstr "on" msgid "routed" msgstr "routed" msgid "tagged" msgstr "tagged" msgid "unlimited" msgstr "unlimited" msgid "unspecified" msgstr "未指定" msgid "unspecified -or- create:" msgstr "未指定 // 创建:" msgid "untagged" msgstr "untagged" msgid "yes" msgstr "yes" msgid "« Back" msgstr "« 后退" #~ msgid "Encr." #~ msgstr "加密" #~ msgid "WLAN-Scan" #~ msgstr "WLAN-搜索" #~ msgid "" #~ "Choose the network you want to attach to this wireless interface. Select " #~ "unspecified to not attach any network or fill out the " #~ "create field to define a new network." #~ msgstr "此无线接口的网络。填写创建栏可新建网络。" #~ msgid "Create Network" #~ msgstr "Create Network" #~ msgid "Link" #~ msgstr "链接" #~ msgid "Networks" #~ msgstr "网络" #~ msgid "Power" #~ msgstr "Power" #~ msgid "Wifi networks in your local environment" #~ msgstr "Wifi networks in your local environment" #~ msgid "" #~ "CIDR-Notation: " #~ "address/prefix" #~ msgstr "" #~ "CIDR-标识:地址/前缀" #~ msgid "DNS-Server" #~ msgstr "DNS-Server" #~ msgid "IPv4-Broadcast" #~ msgstr "IPv4-广播" #~ msgid "IPv6-Address" #~ msgstr "IPv6-地址" #~ msgid "IP-Aliases" #~ msgstr "IP-Aliases" #~ msgid "IPv6 Setup" #~ msgstr "IPv6设置" #~ msgid "" #~ "Note: If you choose an interface here which is part of another network, " #~ "it will be moved into this network." #~ msgstr "" #~ "Note: If you choose an interface here which is part of another network, " #~ "it will be moved into this network." #~ msgid "" #~ "Really delete this interface? The deletion cannot be undone!\\nYou might " #~ "lose access to this router if you are connected via this interface." #~ msgstr "" #~ "Really delete this interface? The deletion cannot be undone!\n" #~ "You might lose access to this router if you are connected via this " #~ "interface." #~ msgid "" #~ "Really delete this wireless network? The deletion cannot be undone!\\nYou " #~ "might lose access to this router if you are connected via this network." #~ msgstr "" #~ "Really delete this wireless network? The deletion cannot be undone!\n" #~ "You might lose access to this router if you are connected via this " #~ "network." #~ msgid "" #~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router " #~ "if you are connected via this interface." #~ msgstr "" #~ "Really shutdown interface \"%s\" ?\n" #~ "You might lose access to this router if you are connected via this " #~ "interface." #~ msgid "" #~ "Really shutdown network ?\\nYou might lose access to this router if you " #~ "are connected via this interface." #~ msgstr "" #~ "Really shutdown network ?\n" #~ "You might lose access to this router if you are connected via this " #~ "interface." #~ msgid "" #~ "The network ports on your router can be combined to several VLANs in which computers can " #~ "communicate directly with each other. VLANs are often used to separate different network " #~ "segments. Often there is by default one Uplink port for a connection to " #~ "the next greater network like the internet and other ports for a local " #~ "network." #~ msgstr "" #~ "The network ports on your router can be combined to several VLANs in which computers can " #~ "communicate directly with each other. VLANs are often used to separate different network " #~ "segments. Often there is by default one Uplink port for a connection to " #~ "the next greater network like the internet and other ports for a local " #~ "network." #~ msgid "Enable buffering" #~ msgstr "开启缓冲" #~ msgid "IPv6-over-IPv4" #~ msgstr "IPv6-over-IPv4" #~ msgid "Custom Files" #~ msgstr "自定义文件" #~ msgid "Custom files" #~ msgstr "自定义文件" #~ msgid "Detected Files" #~ msgstr "查询到的文件" #~ msgid "Detected files" #~ msgstr "查询到的文件" #~ msgid "Files to be kept when flashing a new firmware" #~ msgstr "更新固件时被保存的文件" #~ msgid "General" #~ msgstr "基本信息" #~ msgid "" #~ "Here you can customize the settings and the functionality of LuCI." #~ msgstr "" #~ "这里可以自定义LuCI的组" #~ "件和功能。" #~ msgid "Post-commit actions" #~ msgstr "Post-commit操作" #~ msgid "" #~ "The following files are detected by the system and will be kept " #~ "automatically during sysupgrade" #~ msgstr "更新固件时要保存的文件" #~ msgid "" #~ "These commands will be executed automatically when a given UCI configuration is committed " #~ "allowing changes to be applied instantly." #~ msgstr "" #~ "当UCI配置提交并生效" #~ "后,这些命令将被自动执行。" #~ msgid "" #~ "This is a list of shell glob patterns for matching files and directories " #~ "to include during sysupgrade" #~ msgstr "系统升级时要保存的配置文件以及目录的串列清单" #~ msgid "Web UI" #~ msgstr "Web UI" #~ msgid "PPTP-Server" #~ msgstr "" #~ "PPTP-服务器" #~ msgid "AHCP Settings" #~ msgstr "AHCP设置" #~ msgid "ARP ping retries" #~ msgstr "重试ARP ping" #~ msgid "ATM Settings" #~ msgstr "ATM设置" #~ msgid "Accept Router Advertisements" #~ msgstr "接收路由公告" #~ msgid "Access point (APN)" #~ msgstr "接入点(APN)" #~ msgid "Additional pppd options" #~ msgstr "附加pppd选项" #~ msgid "Allowed range is 1 to FFFF" #~ msgstr "允许范围:1 ~ FFFF" #~ msgid "Automatic Disconnect" #~ msgstr "自动断开" #~ msgid "Backup Archive" #~ msgstr "备份的存档" #~ msgid "" #~ "Configure the local DNS server to use the name servers adverticed by the " #~ "PPP peer" #~ msgstr "本地DNS服务器使用PPP端局提供的域名服务器" #~ msgid "Connect script" #~ msgstr "连接脚本" #~ msgid "Create backup" #~ msgstr "创建备份" #~ msgid "Default" #~ msgstr "默认" #~ msgid "Disconnect script" #~ msgstr "断开脚本" #~ msgid "Edit package lists and installation targets" #~ msgstr "修改软件包的同步源和安装地址" #~ msgid "Enable 4K VLANs" #~ msgstr "开启4K VLAN" #~ msgid "Enable IPv6 on PPP link" #~ msgstr "在PPP链路上启用IPv6" #~ msgid "Firmware image" #~ msgstr "固件文件" #~ msgid "Forward DHCP" #~ msgstr "转发DHCP" #~ msgid "Forward broadcasts" #~ msgstr "转发广播" #~ msgid "HE.net Tunnel ID" #~ msgstr "HE.net隧道ID" #~ msgid "" #~ "Here you can backup and restore your router configuration and - if " #~ "possible - reset the router to the default settings." #~ msgstr "这里可以备份和恢复路由器的配置,也可以恢复到系统出厂设置。" #~ msgid "Installation targets" #~ msgstr "安装位置" #~ msgid "Keep configuration files" #~ msgstr "保留配置文件" #~ msgid "Keep-Alive" #~ msgstr "保持活动" #~ msgid "Kernel" #~ msgstr "内核" #~ msgid "" #~ "Let pppd replace the current default route to use the PPP interface after " #~ "successful connect" #~ msgstr "PPP连接成功后替换当前默认路由为pppd" #~ msgid "Let pppd run this script after establishing the PPP link" #~ msgstr "PPP连接建立后运行此脚本" #~ msgid "Let pppd run this script before tearing down the PPP link" #~ msgstr "PPP连接断开前运行此脚本" #~ msgid "" #~ "Make sure that you provide the correct pin code here or you might lock " #~ "your sim card!" #~ msgstr "请确认pin码正确,并且没有锁定sim卡!" #~ msgid "" #~ "Most of them are network servers, that offer a certain service for your " #~ "device or network like shell access, serving webpages like LuCI, doing mesh routing, sending " #~ "e-mails, ..." #~ msgstr "" #~ "这些大部分是为设备或网络提供特定服务的,比如shell访问,LuCI App,网间漫游,发送E-mail等..." #~ msgid "Number of failed connection tests to initiate automatic reconnect" #~ msgstr "启动自动重连的失败连接次数" #~ msgid "Override Gateway" #~ msgstr "更新网关" #~ msgid "PIN code" #~ msgstr "PIN码" #~ msgid "PPP Settings" #~ msgstr "PPP设置" #~ msgid "Package lists" #~ msgstr "软件同步源" #~ msgid "" #~ "Port PVIDs specify the default " #~ "VLAN ID added to received untagged frames." #~ msgstr "" #~ "端口的PVID指定了添加到所接收的未标" #~ "记桢的默认VLAN ID。" #~ msgid "Port PVIDs on %q" #~ msgstr "分配%q的端口PVID" #~ msgid "Proceed reverting all settings and resetting to firmware defaults?" #~ msgstr "放弃所有配置并将路由复位到默认状态?" #~ msgid "Processor" #~ msgstr "处理器" #~ msgid "Radius-Port" #~ msgstr "Radius-端口" #~ msgid "Radius-Server" #~ msgstr "Radius-服务器" #~ msgid "" #~ "Really shutdown network ?\\nYou might loose access to this router if you " #~ "are connected via this interface." #~ msgstr "" #~ "真的要关闭此网络?\n" #~ "如果正由此网络管理路由,可能导致无法再管理路由器!" #~ msgid "Relay Settings" #~ msgstr "中继设置" #~ msgid "Replace default route" #~ msgstr "重置默认路由" #~ msgid "Reset router to defaults" #~ msgstr "恢复出厂设置" #~ msgid "Routing table ID" #~ msgstr "路由表ID" #~ msgid "" #~ "Seconds to wait for the modem to become ready before attempting to connect" #~ msgstr "Modem尝试连接的就绪准备时间" #~ msgid "Send Router Solicitiations" #~ msgstr "发送路由探测" #~ msgid "Server IPv4-Address" #~ msgstr "服务器IPv4-地址" #~ msgid "Service type" #~ msgstr "服务类型" #~ msgid "Services and daemons perform certain tasks on your device." #~ msgstr "路由器上运行的部分任务和服务。" #~ msgid "Settings" #~ msgstr "设置" #~ msgid "Setup wait time" #~ msgstr "设置缓冲时间" #~ msgid "" #~ "Sorry. OpenWrt does not support a system upgrade on this platform.
" #~ "You need to manually flash your device." #~ msgstr "抱歉,OpenWrt不支持本平台的系统升级。
请手动刷新设备。" #~ msgid "Specify additional command line arguments for pppd here" #~ msgstr "指定附加命令行参数到pppd" #~ msgid "TTL" #~ msgstr "TTL" #~ msgid "The device node of your modem, e.g. /dev/ttyUSB0" #~ msgstr "modem的设备节点。例如/dev/ttyUSB0" #~ msgid "Time (in seconds) after which an unused connection will be closed" #~ msgstr "自动关闭空闲连接的延迟时间(秒)" #~ msgid "Time Server (rdate)" #~ msgstr "校时服务器(rdate)" #~ msgid "Tunnel Settings" #~ msgstr "隧道设置" #~ msgid "Update package lists" #~ msgstr "更新软件列表" #~ msgid "Upload an OpenWrt image file to reflash the device." #~ msgstr "上传OpenWrt固件以刷新设备。" #~ msgid "Upload image" #~ msgstr "上传固件" #~ msgid "Use peer DNS" #~ msgstr "使用对等DNS" #~ msgid "VLAN %d" #~ msgstr "VLAN %d" #~ msgid "" #~ "You can specify multiple DNS servers here, press enter to add a new " #~ "entry. Servers entered here will override automatically assigned ones." #~ msgstr "这里可以指定多路DNS服务器。输入后会自动覆盖已分配的条目。" #~ msgid "" #~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, " #~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support" #~ msgstr "" #~ "UMTS/GPRS功能需安装\"comgt\",PPPoE需安装\"ppp-mod-pppoe\",PPPoA需安装" #~ "\"ppp-mod-pppoa\",PPtP需安装\"pptp\"。" #~ msgid "back" #~ msgstr "后退" #~ msgid "buffered" #~ msgstr "已缓冲" #~ msgid "cached" #~ msgstr "已缓存" #~ msgid "free" #~ msgstr "空闲" #~ msgid "static" #~ msgstr "静态IP" #~ msgid "" #~ "LuCI is a collection " #~ "of free Lua software including an MVC-Webframework and webinterface for embedded devices. LuCI is licensed under the " #~ "Apache-License." #~ msgstr "" #~ "LuCI是一款嵌入式设备使" #~ "用的免费Lua软件,包含web框架和web界面。LuCI遵循Apache-License." #~ msgid "SSH-Keys" #~ msgstr "SSH-密钥" #~ msgid "" #~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve " #~ "LuCI" #~ msgstr "一个用C语言和Lua实现的服务于LuCI的轻量级 HTTP/1.1 web服务器。" #~ msgid "" #~ "A small webserver which can be used to serve LuCI." #~ msgstr "" #~ "一个用于LuCI的小型web服" #~ "务器。" #~ msgid "About" #~ msgstr "关于" #~ msgid "Active IP Connections" #~ msgstr "活动IP连接" #~ msgid "Addresses" #~ msgstr "地址" #~ msgid "Admin Password" #~ msgstr "管理密码" #~ msgid "Alias" #~ msgstr "别名" #~ msgid "Authentication Realm" #~ msgstr "验证范围" #~ msgid "Bridge Port" #~ msgstr "桥接端口" #~ msgid "" #~ "Change the password of the system administrator (User root)" #~ msgstr "修改管理员密码" #~ msgid "Client + WDS" #~ msgstr "客户端+WDS" #~ msgid "Configuration file" #~ msgstr "配置文件" #~ msgid "Connection timeout" #~ msgstr "连接超时" #~ msgid "Contributing Developers" #~ msgstr "特别致谢" #~ msgid "DHCP assigned" #~ msgstr "DHCP有效分配" #~ msgid "Document root" #~ msgstr "根文档" #~ msgid "Enable Keep-Alive" #~ msgstr "开启保持活动" #~ msgid "Enable device" #~ msgstr "开启设备" #~ msgid "Ethernet Bridge" #~ msgstr "以太网桥" #~ msgid "" #~ "Here you can paste public SSH-Keys " #~ "(one per line) for SSH public-key " #~ "authentication." #~ msgstr "" #~ "这里可以粘贴公用SSH密钥以用于SSH公共密钥认证(每行一个密钥)。" #~ msgid "ID" #~ msgstr "ID" #~ msgid "IP Configuration" #~ msgstr "IP设置" #~ msgid "Interface Status" #~ msgstr "接口状态" #~ msgid "KB" #~ msgstr "KB" #~ msgid "Lead Development" #~ msgstr "开发向导" #~ msgid "Master" #~ msgstr "Master" #~ msgid "Master + WDS" #~ msgstr "Master + WDS" #~ msgid "No address configured on this interface." #~ msgstr "本接口未设置地址" #~ msgid "Not configured" #~ msgstr "未设置" #~ msgid "Password successfully changed" #~ msgstr "密码已修改" #~ msgid "Plugin path" #~ msgstr "插件路径" #~ msgid "Ports" #~ msgstr "端口" #~ msgid "Primary" #~ msgstr "主要的" #~ msgid "Project Homepage" #~ msgstr "项目主页" #~ msgid "Pseudo Ad-Hoc" #~ msgstr "伪装Ad-Hoc" #~ msgid "STP" #~ msgstr "STP" #~ msgid "Thanks To" #~ msgstr "感谢" #~ msgid "" #~ "The realm which will be displayed at the authentication prompt for " #~ "protected pages." #~ msgstr "在有提示验证保护的网页时显示验证范围。" #~ msgid "Unknown Error" #~ msgstr "未知错误" #~ msgid "VLAN" #~ msgstr "VLAN" #~ msgid "defaults to /etc/httpd.conf" #~ msgstr "默认为/etc/httpd.conf" #~ msgid "Enable this switch" #~ msgstr "开启交换机" #~ msgid "OPKG error code %i" #~ msgstr "OPKG 出错代码 %i" #~ msgid "Package lists updated" #~ msgstr "更新软件包列表" #~ msgid "Reset switch during setup" #~ msgstr "设置时复位交换机" #~ msgid "Upgrade installed packages" #~ msgstr "升级已安装软件" #~ msgid "DNS-Port" #~ msgstr "DNS-端口" #~ msgid "" #~ "LuCI is a free, " #~ "flexible, and user friendly graphical interface for configuring OpenWrt " #~ "Kamikaze." #~ msgstr "" #~ "LuCI是一个免费的,灵活" #~ "的,可视化的用户界面,可用来配置OpenWrt。" #~ msgid "AP-Isolation" #~ msgstr "AP隔离" #~ msgid "Active IPv4-Routes" #~ msgstr "活动的IPv4链路" #~ msgid "adds domain names to hostentries in the resolv file" #~ msgstr "添加域名条目到主机解析文件" #~ msgid "Add the Wifi network to physical network" #~ msgstr "添加无线网络到物理网络" #~ msgid "" #~ "Also kernel or service logfiles can be viewed here to get an overview " #~ "over their current state." #~ msgstr "这里显示了系统日志,可以了解系统当前的运行状态。" #~ msgid "And now have fun with your router!" #~ msgstr "现在开始体验路由带来的乐趣吧!" #~ msgid "" #~ "As we always want to improve this interface we are looking forward to " #~ "your feedback and suggestions." #~ msgstr "我们一直在努力提升界面效果,并期待着您的意见与建议。" #~ msgid "Attach to existing network" #~ msgstr "连接现有网络" #~ msgid "Clamp Segment Size" #~ msgstr "固定段大小" #~ msgid "Configuration applied" #~ msgstr "设置已应用" #~ msgid "Create Or Attach Network" #~ msgstr "创建/连接 网络" #~ msgid "Devices" #~ msgstr "设备" #~ msgid "enable" #~ msgstr "启用" #~ msgid "Errors" #~ msgstr "错误" #~ msgid "Essentials" #~ msgstr "概要" #~ msgid "" #~ "Fixes problems with unreachable websites, submitting forms or other " #~ "unexpected behaviour for some ISPs." #~ msgstr "修复某些ISP的不可达网站或其他未知错误" #~ msgid "" #~ "filter useless DNS-queries of " #~ "Windows-systems" #~ msgstr "" #~ "过滤无用的DNSWindows-systems查询" #~ msgid "Hardware Address" #~ msgstr "硬件地址" #~ msgid "Hello!" #~ msgstr "Hello!" #~ msgid "Here you can configure installed wifi devices." #~ msgstr "这里可以配置已安装的无线设备。" #~ msgid "" #~ "Here you can find information about the current system status like CPU clock frequency, memory " #~ "usage or network interface data." #~ msgstr "" #~ "这里可以查看系统当前的状态信息,比如CPU频率、内存使用率或网络链接数据。" #~ msgid "" #~ "If the interface is attached to an existing network it will be " #~ "bridged to the existing interfaces and is covered by the " #~ "firewall zone of the choosen network.
Uncheck the attach option to " #~ "define a new standalone network for this interface." #~ msgstr "" #~ "如果连接在已有网络,那么它会被桥接到现有接口,并且被所选的防火墙" #~ "区域覆盖。取消附加选项可以重定义此接口为新的独立网络。" #~ msgid "Ignore /etc/hosts" #~ msgstr "忽略 /etc/hosts" #~ msgid "Independent (Ad-Hoc)" #~ msgstr "独立(点对点Ad-Hoc)" #~ msgid "Internet Connection" #~ msgstr "网络连接" #~ msgid "Join (Client)" #~ msgstr "加入(客户端)" #~ msgid "Leases" #~ msgstr "租约" #~ msgid "localises the hostname depending on its subnet" #~ msgstr "根据子网本地化主机名" #~ msgid "LuCI Components" #~ msgstr "LuCI 组件" #~ msgid "" #~ "Notice: In LuCI " #~ "changes have to be confirmed by clicking Changes - Save & Apply " #~ "before being applied." #~ msgstr "" #~ "注意:在LuCI中,点击 保" #~ "存&应用 后设置才会生效。" #~ msgid "" #~ "On the following pages you can adjust all important settings of your " #~ "router." #~ msgstr "本页可以设置路由器的重要参数。" #~ msgid "Perform Actions" #~ msgstr "执行操作" #~ msgid "" #~ "prevents caching of negative DNS-replies" #~ msgstr "阻止缓存无效的DNS应答" #~ msgid "Prevents client to client communication" #~ msgstr "禁止客户端间的通信" #~ msgid "Provide (Access Point)" #~ msgstr "添加(接入点)" #~ msgid "Search file..." #~ msgstr "查找文件..." #~ msgid "Server" #~ msgstr "服务器" #~ msgid "TX / RX" #~ msgstr "发送 / 接收" #~ msgid "The LuCI Team" #~ msgstr "LuCI开发团队" #~ msgid "The following changes have been comitted" #~ msgstr "以下更改已提交" #~ msgid "The following changes have been applied" #~ msgstr "以下更改已生效" #~ msgid "" #~ "This is the administration area of LuCI." #~ msgstr "" #~ "这是LuCI的管理页面。" #~ msgid "transmitted / received" #~ msgstr "已传输 / 已接收" #~ msgid "" #~ "When flashing a new firmware with LuCI these files will be added to the new firmware " #~ "installation." #~ msgstr "" #~ "当刷写带LuCI的新固件" #~ "时,这些文件将被加入到新的固件中。" #~ msgid "" #~ "With DHCP " #~ "network members can automatically receive their network settings (IP-address, netmask, DNS-server, ...)." #~ msgstr "" #~ "用户可以通过DHCP自动接收网络的(IP地址,子网" #~ "掩码,DNS服务器, ...)等配置信" #~ "息。" #~ msgid "Wireless Scan" #~ msgstr "搜索无线" #~ msgid "" #~ "You are about to join the wireless network %s. " #~ "In order to complete the process, you need to provide some additional " #~ "details." #~ msgstr "" #~ "即将加入无线网络%s,这需要填写一些额外信息。" #~ msgid "" #~ "You can run several wifi networks with one device. Be aware that there " #~ "are certain hardware and driverspecific restrictions. Normally you can " #~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network " #~ "simultaneously." #~ msgstr "" #~ "一台设备可以用虚拟方式同时运行几个无线网络。但注意会有硬件或软件限制。通常" #~ "可以运行一个点对点无线网络,或同时运行三个Master模式和一个客户端模式的无线" #~ "网络。" #~ msgid "" #~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP " #~ "support" #~ msgstr "需要安装\"ppp-mod-pppoe\"以支持PPPoe,\"pptp\"以支持PPtP" #~ msgid "" #~ "You need to install wpa-supplicant to use WPA!" #~ msgstr "需要安装wpa-supplicant以支持WPA加密!" #~ msgid "" #~ "You need to install the Broadcom nas supplicant " #~ "to use WPA!" #~ msgstr "" #~ "需要安装Broadcomnas supplicant以支持WPA加密!" #~ msgid "User Interface" #~ msgstr "用户界面" #~ msgid "(hidden)" #~ msgstr "(隐藏)" #~ msgid "(optional)" #~ msgstr "(任意)" #~ msgid "Aliases" #~ msgstr "别名" #~ msgid "First leased address" #~ msgstr "起始分配地址" #~ msgid "Local Network" #~ msgstr "本地网络" #~ msgid "Number of leased addresses" #~ msgstr "地址租用数" #~ msgid "Path" #~ msgstr "路径" #~ msgid "Resolvfile" #~ msgstr "解析文件" #~ msgid "Zone" #~ msgstr "区域" #~ msgid "additional hostfile" #~ msgstr "附加的主机文件" #~ msgid "automatic" #~ msgstr "自动" #~ msgid "automatically reconnect" #~ msgstr "自动重连" #~ msgid "concurrent queries" #~ msgstr "并发查询" #~ msgid "disconnect when idle for" #~ msgstr "空闲自动断开" #~ msgid "don't cache unknown" #~ msgstr "不缓存未知数据" #~ msgid "installed" #~ msgstr "已安装" #~ msgid "manual" #~ msgstr "手册" #~ msgid "not installed" #~ msgstr "未安装" #~ msgid "query port" #~ msgstr "查询端口" #~ msgid "all" #~ msgstr "全部" #~ msgid "Code" #~ msgstr "代码" #~ msgid "Distance" #~ msgstr "距离" #~ msgid "Legend" #~ msgstr "图例" #~ msgid "Library" #~ msgstr "Library" #~ msgid "see '%s' manpage" #~ msgstr "详参 '%s' 联机帮助" #~ msgid "Package Manager" #~ msgstr "软件包管理" #~ msgid "Service" #~ msgstr "服务" #~ msgid "Statistics" #~ msgstr "统计"